[dts][PATCH V4 2/3] test_plans/dpdk_gro_lib_cbdma: add dpdk_gro_lib_cbdma testplan

[dts][PATCH V4 2/3] test_plans/dpdk_gro_lib_cbdma: add dpdk_gro_lib_cbdma testplan

[Wei Ling]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 8904 bytes --]

Add new testplan test_plans/dpdk_gro_lib_cbdma_test_plan.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 test_plans/dpdk_gro_lib_cbdma_test_plan.rst | 185 ++++++++++++++++++++
 1 file changed, 185 insertions(+)
 create mode 100644 test_plans/dpdk_gro_lib_cbdma_test_plan.rst

diff --git a/test_plans/dpdk_gro_lib_cbdma_test_plan.rst b/test_plans/dpdk_gro_lib_cbdma_test_plan.rst
new file mode 100644
index 00000000..445540a6
--- /dev/null
+++ b/test_plans/dpdk_gro_lib_cbdma_test_plan.rst
@@ -0,0 +1,185 @@
+.. Copyright (c) <2022>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=================================
+DPDK GRO lib with cbdma test plan
+=================================
+
+Description
+===========
+
+Generic Receive Offload (GRO) is a widely used SW-based offloading
+technique to reduce per-packet processing overheads. By reassembling
+small packets into larger ones, GRO enables applications to process
+fewer large packets directly, thus reducing the number of packets to
+be processed. To benefit DPDK-based applications, like Open vSwitch,
+DPDK also provides own GRO implementation. In DPDK, GRO is implemented
+as a standalone library. Applications explicitly use the GRO library to
+reassemble packets.
+
+In the GRO library, there are many GRO types which are defined by packet
+types. One GRO type is in charge of process one kind of packets. For
+example, TCP/IPv4 GRO processes TCP/IPv4 packets.
+
+Each GRO type has a reassembly function, which defines own algorithm and
+table structure to reassemble packets. We assign input packets to the
+corresponding GRO functions by MBUF->packet_type.
+
+The GRO library doesn't check if input packets have correct checksums and
+doesn't re-calculate checksums for merged packets. The GRO library
+assumes the packets are complete (i.e., MF==0 && frag_off==0), when IP
+fragmentation is possible (i.e., DF==0). Additionally, it complies RFC
+6864 to process the IPv4 ID field.
+
+Currently, the GRO library provides GRO supports for TCP/IPv4 packets and
+VxLAN packets which contain an outer IPv4 header and an inner TCP/IPv4
+packet.
+
+This test plan includes dpdk gro lib test with TCP/IPv4 traffic with CBDMA.
+
+..Note:
+1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
+2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version >= 5.2.0, dut to old qemu exist reconnect issue when multi-queues test.
+3.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
+
+Prerequisites
+=============
+
+Modify the testpmd code as following::
+
+    --- a/app/test-pmd/csumonly.c
+    +++ b/app/test-pmd/csumonly.c
+    @@ -693,10 +693,12 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
+                     * and inner headers */
+     
+                    eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+    +#if 0
+                    ether_addr_copy(&peer_eth_addrs[fs->peer_addr],
+                                    &eth_hdr->d_addr);
+                    ether_addr_copy(&ports[fs->tx_port].eth_addr,
+                                    &eth_hdr->s_addr);
+    +#endif
+                    parse_ethernet(eth_hdr, &info);
+                    l3_hdr = (char *)eth_hdr + info.l2_len;
+
+Modify the dpdk code as following::
+
+   diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
+   index b38a4b6b1..573250dbe 100644
+   --- a/drivers/net/vhost/rte_eth_vhost.c
+   +++ b/drivers/net/vhost/rte_eth_vhost.c
+   @@ -1071,8 +1071,14 @@ eth_dev_info(struct rte_eth_dev *dev,
+     dev_info->min_rx_bufsize = 0;
+
+     dev_info->tx_offload_capa = DEV_TX_OFFLOAD_MULTI_SEGS |
+   -       DEV_TX_OFFLOAD_VLAN_INSERT;
+   - dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP;
+   +       DEV_TX_OFFLOAD_VLAN_INSERT |
+   +       DEV_TX_OFFLOAD_UDP_CKSUM |
+   +       DEV_TX_OFFLOAD_TCP_CKSUM |
+   +       DEV_TX_OFFLOAD_IPV4_CKSUM |
+   +       DEV_TX_OFFLOAD_TCP_TSO;
+   + dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP |
+   +       DEV_RX_OFFLOAD_TCP_CKSUM |
+   +       DEV_RX_OFFLOAD_UDP_CKSUM |
+   +       DEV_RX_OFFLOAD_IPV4_CKSUM |
+   +       DEV_RX_OFFLOAD_TCP_LRO;
+    }
+
+Compile DPDK as following::
+
+   CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+   ninja -C x86_64-native-linuxapp-gcc -j 110
+
+Test flow
+=========
+
+NIC2(In kernel) -> NIC1(DPDK) -> testpmd(csum fwd) -> Vhost -> Virtio-net
+
+
+Test Case1: DPDK GRO test with two queues and two CBDMA channels using tcp/ipv4 traffic
+=======================================================================================
+
+Test flow
+=========
+
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+    ip netns del ns1
+    ip netns add ns1
+    ip link set enp26s0f0 netns ns1       # [enp216s0f0] is the name of nic2
+    ip netns exec ns1 ifconfig enp26s0f0 1.1.1.8 up
+    ip netns exec ns1 ethtool -K enp26s0f0 tso on
+
+2. Bind cbdma port and nic1 to vfio-pci, launch vhost-user with testpmd and set flush interval to 1::
+
+    ./usertools/dpdk-devbind.py -b vfio-pci xx:xx.x
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-31 -n 4 \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,dmas=[txq0@80:04.0;txq1@80:04.1]' \
+    -- -i --txd=1024 --rxd=1024 --txq=2 --rxq=2 --nb-cores=2
+    testpmd> set fwd csum
+    testpmd> stop
+    testpmd> port stop 0
+    testpmd> port stop 1
+    testpmd> csum set tcp hw 0
+    testpmd> csum set ip hw 0
+    testpmd> csum set tcp hw 1
+    testpmd> csum set ip hw 1
+    testpmd> set port 0 gro on
+    testpmd> set gro flush 1
+    testpmd> port start 0
+    testpmd> port start 1
+    testpmd> start
+
+3.  Set up vm with virto device and using kernel virtio-net driver::
+
+     taskset -c 31 /home/qemu-install/qemu-4.2.1/bin/qemu-system-x86_64 -name us-vhost-vm1 \
+       -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+       -numa node,memdev=mem \
+       -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -netdev user,id=yinan,hostfwd=tcp:127.0.0.1:6005-:22 -device e1000,netdev=yinan \
+       -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu2004.img  \
+       -chardev socket,id=char0,path=./vhost-net \
+       -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=2 \
+       -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,mq=on,vectors=15 \
+       -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+    ifconfig ens4 1.1.1.2 up  # [ens3] is the name of virtio-net
+    ethtool -L ens4 combined 2
+    ethtool -K ens4 gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput, should be larger than 10Gbits/sec::
+
+    Host side :  taskset -c 35 ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 2
+    VM side:     iperf -s
-- 
2.25.1