test suite reviews and discussions
 help / color / mirror / Atom feed
From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V2 2/3] test_plans/virtio_event_idx_interrupt_cbdma_test_plan: add virtio_event_idx_interrupt_cbdma testplan
Date: Mon,  9 May 2022 23:22:20 -0400
Message-ID: <20220510032220.343716-1-weix.ling@intel.com> (raw)

Add new testplan test_plans/virtio_event_idx_interrupt_cbdma_test_plan.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 ...io_event_idx_interrupt_cbdma_test_plan.rst | 207 ++++++++++++++++++
 1 file changed, 207 insertions(+)
 create mode 100644 test_plans/virtio_event_idx_interrupt_cbdma_test_plan.rst

diff --git a/test_plans/virtio_event_idx_interrupt_cbdma_test_plan.rst b/test_plans/virtio_event_idx_interrupt_cbdma_test_plan.rst
new file mode 100644
index 00000000..7c470953
--- /dev/null
+++ b/test_plans/virtio_event_idx_interrupt_cbdma_test_plan.rst
@@ -0,0 +1,207 @@
+.. Copyright (c) <2022>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+====================================================
+virtio event idx interrupt mode with cbdma test plan
+====================================================
+
+Description
+===========
+
+This feature is to suppress interrupts for performance improvement, need compare
+interrupt times with and without virtio event idx enabled. This test plan test 
+virtio event idx interrupt with cbdma enabled. Also need cover driver reload test.
+
+..Note:
+1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
+2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version >= 5.2.0, dut to old qemu exist reconnect issue when multi-queues test.
+3.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost-user --> Virtio-net
+
+Test Case1: Split ring virtio-pci driver reload test with CBDMA enabled
+=======================================================================
+
+1. Bind one nic port and one cbdma channel to vfio-pci, then launch the vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xF0000000 -n 4 --file-prefix=vhost \
+    --vdev 'net_vhost,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' \
+    -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd> start
+
+2. Launch VM::
+
+    taskset -c 32-33 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu2004_2.img  \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
+     -chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+     -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
+     -vnc :12 -daemonize
+
+3. On VM1, set virtio device IP, send 10M packets from packet generator to nic then check virtio device can receive packets::
+
+    ifconfig [ens3] 1.1.1.2      # [ens3] is the name of virtio-net
+    tcpdump -i [ens3]
+
+4. Reload virtio-net driver by below cmds::
+
+    ifconfig [ens3] down
+    ./usertools/dpdk-devbind.py -u [00:03.0]   # [00:03.0] is the pci addr of virtio-net
+    ./usertools/dpdk-devbind.py -b virtio-pci [00:03.0]
+
+5. Check virtio device can receive packets again::
+
+    ifconfig [ens3] 1.1.1.2
+    tcpdump -i [ens3]
+
+6. Rerun step4 and step5 100 times to check event idx workable after driver reload.
+
+Test Case2: Wake up split ring virtio-net cores with event idx interrupt mode and cbdma enabled 16 queues test
+==============================================================================================================
+
+1. Bind one nic port and 16 cbdma channels to vfio-pci, then launch the vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-17 -n 4 --file-prefix=vhost \
+    --vdev 'net_vhost,iface=vhost-net,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7]' \
+    -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+    testpmd> start
+
+2. Launch VM::
+
+    taskset -c 32-33 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu2004_2.img  \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
+     -chardev socket,id=char0,path=./vhost-net,server -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
+     -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
+     -vnc :12 -daemonize
+
+3. On VM1, give virtio device ip addr and enable vitio-net with 16 quques::
+
+    ifconfig [ens3] 1.1.1.2           # [ens3] is the name of virtio-net
+    ethtool -L [ens3] combined 16
+
+4. Send 10M different ip addr packets from packet generator to nic, check virtio-net interrupt times by below cmd in VM::
+
+    cat /proc/interrupts
+
+5. After two hours stress test, stop and restart testpmd, check each queue has new packets coming::
+
+    testpmd> stop
+    testpmd> start
+    testpmd> stop
+
+Test Case3: Packed ring virtio-pci driver reload test with CBDMA enabled
+========================================================================
+
+1. Bind one nic port and one cbdma channel to vfio-pci, then launch the vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xF0000000 -n 4 --file-prefix=vhost \
+    --vdev 'net_vhost,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' \
+    -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd> start
+
+2. Launch VM::
+
+    taskset -c 32-33 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu2004_2.img  \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
+     -chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+     -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
+     -vnc :12 -daemonize
+
+3. On VM1, set virtio device IP, send 10M packets from packet generator to nic then check virtio device can receive packets::
+
+    ifconfig [ens3] 1.1.1.2      # [ens3] is the name of virtio-net
+    tcpdump -i [ens3]
+
+4. Reload virtio-net driver by below cmds::
+
+    ifconfig [ens3] down
+    ./usertools/dpdk-devbind.py -u [00:03.0]   # [00:03.0] is the pci addr of virtio-net
+    ./usertools/dpdk-devbind.py -b virtio-pci [00:03.0]
+
+5. Check virtio device can receive packets again::
+
+    ifconfig [ens3] 1.1.1.2
+    tcpdump -i [ens3]
+
+6. Rerun step4 and step5 100 times to check event idx workable after driver reload.
+
+Test Case4: Wake up packed ring virtio-net cores with event idx interrupt mode and cbdma enabled 16 queues test
+===============================================================================================================
+
+1. Bind one nic port and 16 cbdma channels to vfio-pci, then launch the vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-17 -n 4 --file-prefix=vhost \
+    --vdev 'net_vhost,iface=vhost-net,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7]' \
+    -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+    testpmd> start
+
+2. Launch VM::
+
+    taskset -c 32-33 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu2004_2.img  \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
+     -chardev socket,id=char0,path=./vhost-net,server -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
+     -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
+     -vnc :12 -daemonize
+
+3. On VM1, give virtio device ip addr and enable vitio-net with 16 quques::
+
+    ifconfig [ens3] 1.1.1.2           # [ens3] is the name of virtio-net
+    ethtool -L [ens3] combined 16
+
+4. Send 10M different ip addr packets from packet generator to nic, check virtio-net interrupt times by below cmd in VM::
+
+    cat /proc/interrupts
+
+5. After two hours stress test, stop and restart testpmd, check each queue has new packets coming::
+
+    testpmd> stop
+    testpmd> start
+    testpmd> stop
+
-- 
2.25.1


                 reply	other threads:[~2022-05-10  3:23 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220510032220.343716-1-weix.ling@intel.com \
    --to=weix.ling@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

test suite reviews and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dts/0 dts/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dts dts/ http://inbox.dpdk.org/dts \
		dts@dpdk.org
	public-inbox-index dts

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dts


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git