* [dts][PATCH V1 2/2] tests/dpdk_gro_lib: delete CBDMA related testcase and code
@ 2022-05-19 6:35 Wei Ling
0 siblings, 0 replies; only message in thread
From: Wei Ling @ 2022-05-19 6:35 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
Delete CBDMA related testcase and code.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
tests/TestSuite_dpdk_gro_lib.py | 151 ++++----------------------------
1 file changed, 15 insertions(+), 136 deletions(-)
diff --git a/tests/TestSuite_dpdk_gro_lib.py b/tests/TestSuite_dpdk_gro_lib.py
index e19b3695..ea69f635 100644
--- a/tests/TestSuite_dpdk_gro_lib.py
+++ b/tests/TestSuite_dpdk_gro_lib.py
@@ -105,10 +105,6 @@ class TestDPDKGROLib(TestCase):
self.prepare_dpdk()
self.base_dir = self.dut.base_dir.replace("~", "/root")
self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
- # get cbdma device
- self.cbdma_dev_infos = []
- self.dmas_info = None
- self.device_str = None
def set_up(self):
#
@@ -119,59 +115,6 @@ class TestDPDKGROLib(TestCase):
self.dut.send_expect("killall -s INT %s" % self.testpmd_name, "#")
self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
- def get_cbdma_ports_info_and_bind_to_dpdk(self, cbdma_num):
- """
- get all cbdma ports
- """
- out = self.dut.send_expect(
- "./usertools/dpdk-devbind.py --status-dev dma", "# ", 30
- )
- device_info = out.split("\n")
- for device in device_info:
- pci_info = re.search("\s*(0000:\S*:\d*.\d*)", device)
- if pci_info is not None:
- dev_info = pci_info.group(1)
- # the numa id of ioat dev, only add the device which
- # on same socket with nic dev
- bus = int(dev_info[5:7], base=16)
- if bus >= 128:
- cur_socket = 1
- else:
- cur_socket = 0
- if self.ports_socket == cur_socket:
- self.cbdma_dev_infos.append(pci_info.group(1))
- self.verify(
- len(self.cbdma_dev_infos) >= cbdma_num,
- "There no enough cbdma device to run this suite",
- )
- used_cbdma = self.cbdma_dev_infos[0:cbdma_num]
- dmas_info = ""
- for dmas in used_cbdma:
- number = used_cbdma.index(dmas)
- dmas = "txq{}@{};".format(number, dmas)
- dmas_info += dmas
- self.dmas_info = dmas_info[:-1]
- self.device_str = " ".join(self.cbdma_dev_infos)
- self.dut.send_expect(
- "./usertools/dpdk-devbind.py --force --bind=%s %s"
- % (self.drivername, self.device_str),
- "# ",
- 60,
- )
-
- def bind_cbdma_device_to_kernel(self):
- if self.device_str is not None:
- self.dut.send_expect("modprobe ioatdma", "# ")
- self.dut.send_expect(
- "./usertools/dpdk-devbind.py -u %s" % self.device_str, "# ", 30
- )
- self.dut.send_expect(
- "./usertools/dpdk-devbind.py --force --bind=ioatdma %s"
- % self.device_str,
- "# ",
- 60,
- )
-
def launch_testpmd_gro_on(self, mode=1, queue=1):
#
# Launch the vhost sample with different parameters
@@ -179,37 +122,21 @@ class TestDPDKGROLib(TestCase):
# mode 2 : tcp traffic heavy mode
# mode 3 : vxlan traffic light mode
# mode 4 : tcp traffic flush 4
- # mode 5 : tcp traffice light mode with cdbma enable
- if mode == 5:
- self.get_cbdma_ports_info_and_bind_to_dpdk(cbdma_num=2)
- eal_param = self.dut.create_eal_parameters(
- cores=self.vhost_list,
- vdevs=[
- "'net_vhost0,iface=%s/vhost-net,queues=%s,dmas=[%s]'"
- % (self.base_dir, queue, self.dmas_info)
- ],
- )
- self.testcmd_start = (
- self.path + eal_param + " -- -i --txd=1024 --rxd=1024 --txq=2 --rxq=2"
- )
- self.vhost_user = self.dut.new_session(suite="user")
- self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
- else:
- eal_param = self.dut.create_eal_parameters(
- cores=self.vhost_list,
- vdevs=[
- "net_vhost0,iface=%s/vhost-net,queues=%s" % (self.base_dir, queue)
- ],
- ports=[self.pci],
- )
- self.testcmd_start = (
- self.path
- + eal_param
- + " -- -i --enable-hw-vlan-strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
- )
- self.vhost_user = self.dut.new_session(suite="user")
- self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
- self.set_testpmd_params()
+ eal_param = self.dut.create_eal_parameters(
+ cores=self.vhost_list,
+ vdevs=[
+ "net_vhost0,iface=%s/vhost-net,queues=%s" % (self.base_dir, queue)
+ ],
+ ports=[self.pci],
+ )
+ self.testcmd_start = (
+ self.path
+ + eal_param
+ + " -- -i --enable-hw-vlan-strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
+ )
+ self.vhost_user = self.dut.new_session(suite="user")
+ self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
+ self.set_testpmd_params()
def set_testpmd_params(self, mode=1):
# set testpmd params
@@ -513,53 +440,6 @@ class TestDPDKGROLib(TestCase):
self.quit_testpmd()
self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
- def test_vhost_gro_tcp_ipv4_with_cbdma_enable(self):
- self.config_kernel_nic_host(0)
- self.heavymode = 5
- self.launch_testpmd_gro_on(self.heavymode, queue=2)
- self.start_vm(mode=5, queue=2)
- time.sleep(5)
- self.dut.get_session_output(timeout=2)
- # Get the virtio-net device name
- for port in self.vm1_dut.ports_info:
- self.vm1_intf = port["intf"]
- # Start the Iperf test
- self.vm1_dut.send_expect("ifconfig -a", "#", 30)
- self.vm1_dut.send_expect(
- "ifconfig %s %s up" % (self.vm1_intf, self.virtio_ip1), "#", 10
- )
- self.vm1_dut.send_expect("ethtool -L %s combined 2" % self.vm1_intf, "#", 10)
- self.vm1_dut.send_expect("ethtool -K %s gro off" % (self.vm1_intf), "#", 10)
- self.set_testpmd_params()
- self.vm1_dut.send_expect("iperf -s", "", 10)
- self.dut.send_expect("rm /root/iperf_client.log", "#", 10)
- out = self.dut.send_expect(
- "ip netns exec ns1 iperf -c %s -i 1 -t 60 -m -P 2 > /root/iperf_client.log &"
- % (self.virtio_ip1),
- "",
- 180,
- )
- time.sleep(30)
- print(out)
- perfdata = self.iperf_result_verify("GRO lib")
- print(("the GRO lib %s " % (self.output_result)))
- # self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
- self.quit_testpmd()
- self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
- exp_perfdata = self.dut.send_expect(
- "cat /root/dpdk_gro_lib_on_iperf_tc5.log", "#"
- )
- self.verify(
- "No such file or directory" not in exp_perfdata,
- "Cannot find dpdk_gro_lib_on_iperf_tc5.log, please run test_vhost_gro_with_2queues_tcp_lightmode firstly",
- )
- if exp_perfdata:
- self.verify(
- float(perfdata) > float(exp_perfdata),
- "TestFailed: W/cbdma iperf data is %s Kbits/sec, W/O cbdma iperf data is %s Kbits/sec"
- % (perfdata, exp_perfdata),
- )
-
def test_vhost_gro_with_2queues_tcp_lightmode(self):
"""
Test Case5: DPDK GRO test with 2 queues using tcp/ipv4 traffic
@@ -626,7 +506,6 @@ class TestDPDKGROLib(TestCase):
"# ",
30,
)
- self.bind_cbdma_device_to_kernel()
def tear_down_all(self):
"""
--
2.25.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-05-19 6:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-19 6:35 [dts][PATCH V1 2/2] tests/dpdk_gro_lib: delete CBDMA related testcase and code Wei Ling
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).