Add new testsuite for CBDMA related testcases. Signed-off-by: Wei Ling --- ...st_event_idx_interrupt_cbdma_test_plan.rst | 281 ++++++++++++++++++ 1 file changed, 281 insertions(+) create mode 100644 test_plans/vhost_event_idx_interrupt_cbdma_test_plan.rst diff --git a/test_plans/vhost_event_idx_interrupt_cbdma_test_plan.rst b/test_plans/vhost_event_idx_interrupt_cbdma_test_plan.rst new file mode 100644 index 00000000..1c6a6400 --- /dev/null +++ b/test_plans/vhost_event_idx_interrupt_cbdma_test_plan.rst @@ -0,0 +1,281 @@ +.. Copyright (c) <2022>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +======================================== +vhost event idx interrupt mode test plan +======================================== + +Description +=========== + +Vhost event idx interrupt need test with l3fwd-power sample with CBDMA channel, send small packets +from virtio-net to vhost side，check vhost-user cores can be wakeup status，and +vhost-user cores should be sleep status after stop sending packets from virtio +side.For packed virtqueue test, need using qemu version > 4.2.0. + + +Test flow +========= + +Virtio-net --> Vhost-user + +Test Case 1: wake up split ring vhost-user cores with event idx interrupt mode and cbdma enabled 16 queues test +=============================================================================================================== + +1. Bind 16 cbdma ports to vfio-pci driver, then launch l3fwd-power example app with client mode:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-16 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7]' \ + -- -p 0x1 --parse-ptype 1 \ + --config "(0,0,1),(0,1,2),(0,2,3),(0,3,4),(0,4,5),(0,5,6),(0,6,7),(0,7,8),(0,8,9),(0,9,10),(0,10,11),(0,11,12),(0,12,13),(0,13,14),(0,14,15),(0,15,16)" + +2. Launch VM1 with server mode:: + + taskset -c 17-18 qemu-system-x86_64 -name us-vhost-vm1 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu1910.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,mq=on,vectors=40 -vnc :12 + +3. Relauch l3fwd-power sample for port up:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-16 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7]' \ + -- -p 0x1 --parse-ptype 1 \ + --config "(0,0,1),(0,1,2),(0,2,3),(0,3,4),(0,4,5),(0,5,6),(0,6,7),(0,7,8),(0,8,9),(0,9,10),(0,10,11),(0,11,12),(0,12,13),(0,13,14),(0,14,15),(0,15,16)" + +4. Set vitio-net with 16 quques and give vitio-net ip address:: + + ethtool -L [ens3] combined 16 # [ens3] is the name of virtio-net + ifconfig [ens3] 1.1.1.1 + +5. Send packets with different IPs from virtio-net, notice to bind each vcpu to different send packets process:: + + taskset -c 0 ping 1.1.1.2 + taskset -c 1 ping 1.1.1.3 + taskset -c 2 ping 1.1.1.4 + taskset -c 3 ping 1.1.1.5 + taskset -c 4 ping 1.1.1.6 + taskset -c 5 ping 1.1.1.7 + taskset -c 6 ping 1.1.1.8 + taskset -c 7 ping 1.1.1.9 + taskset -c 8 ping 1.1.1.2 + taskset -c 9 ping 1.1.1.2 + taskset -c 10 ping 1.1.1.2 + taskset -c 11 ping 1.1.1.2 + taskset -c 12 ping 1.1.1.2 + taskset -c 13 ping 1.1.1.2 + taskset -c 14 ping 1.1.1.2 + taskset -c 15 ping 1.1.1.2 + +6. Check vhost related cores are waked up with l3fwd-power log, such as following:: + + L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 + ... + ... + L3FWD_POWER: lcore 15 is waked up from rx interrupt on port 0 queue 15 + +Test Case 2: wake up split ring vhost-user cores by multi virtio-net in VMs with event idx interrupt mode and cbdma enabled test +================================================================================================================================ + +1. Bind two cbdma ports to vfio-pci driver, then launch l3fwd-power example app with client mode:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-2 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=1,client=1,dmas=[txq0@00:04.0]' \ + --vdev 'eth_vhost1,iface=/vhost-net1,queues=1,client=1,dmas=[txq0@80:04.0]' \ + -- -p 0x3 --parse-ptype 1 --config "(0,0,1),(1,0,2)" + +2. Launch VM1 and VM2 with server mode:: + + taskset -c 33 \ + qemu-system-x86_64 -name us-vhost-vm1 \ + -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \ + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu1910.img \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,server,id=char0,path=/vhost-net0 \ + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \ + -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,csum=on -vnc :10 -daemonize + + taskset -c 34 \ + qemu-system-x86_64 -name us-vhost-vm2 \ + -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \ + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu1910-2.img \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6004-:22 \ + -chardev socket,server,id=char0,path=/vhost-net1 \ + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \ + -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet1,csum=on -vnc :11 -daemonize + +3. Relauch l3fwd-power sample for port up:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-2 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=1,client=1,dmas=[txq0@00:04.0]' \ + --vdev 'eth_vhost1,iface=/vhost-net1,queues=1,client=1,dmas=[txq0@80:04.0]' \ + -- -p 0x3 --parse-ptype 1 --config "(0,0,1),(1,0,2)" + +4. On VM1, set ip for virtio device and send packets to vhost:: + + ifconfig [ens3] 1.1.1.2 + #[ens3] is the virtual device name + ping 1.1.1.3 + #send packets to vhost + +5. On VM2, also set ip for virtio device and send packets to vhost:: + + ifconfig [ens3] 1.1.1.4 + #[ens3] is the virtual device name + ping 1.1.1.5 + #send packets to vhost + +6. Check vhost related cores are waked up with l3fwd-power log. + +Test Case 3: wake up packed ring vhost-user cores with event idx interrupt mode and cbdma enabled 16 queues test +================================================================================================================ + +1. Bind 16 cbdma ports to vfio-pci driver, then launch l3fwd-power example app with client mode:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-16 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7]' \ + -- -p 0x1 --parse-ptype 1 \ + --config "(0,0,1),(0,1,2),(0,2,3),(0,3,4),(0,4,5),(0,5,6),(0,6,7),(0,7,8),(0,8,9),(0,9,10),(0,10,11),(0,11,12),(0,12,13),(0,13,14),(0,14,15),(0,15,16)" + +2. Launch VM1 with server mode:: + + taskset -c 17-18 qemu-system-x86_64 -name us-vhost-vm1 -enable-kvm -cpu host -smp 1 -m 4096 \ + -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \ + -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu1910.img \ + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \ + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,id=char0,path=./vhost-net0 \ + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \ + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,mq=on,vectors=40,packed=on -vnc :12 + +3. Relauch l3fwd-power sample for port up:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-16 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7]' \ + -- -p 0x1 --parse-ptype 1 \ + --config "(0,0,1),(0,1,2),(0,2,3),(0,3,4),(0,4,5),(0,5,6),(0,6,7),(0,7,8),(0,8,9),(0,9,10),(0,10,11),(0,11,12),(0,12,13),(0,13,14),(0,14,15),(0,15,16)" + +4. Set vitio-net with 16 quques and give vitio-net ip address:: + + ethtool -L [ens3] combined 16 # [ens3] is the name of virtio-net + ifconfig [ens3] 1.1.1.1 + +5. Send packets with different IPs from virtio-net, notice to bind each vcpu to different send packets process:: + + taskset -c 0 ping 1.1.1.2 + taskset -c 1 ping 1.1.1.3 + taskset -c 2 ping 1.1.1.4 + taskset -c 3 ping 1.1.1.5 + taskset -c 4 ping 1.1.1.6 + taskset -c 5 ping 1.1.1.7 + taskset -c 6 ping 1.1.1.8 + taskset -c 7 ping 1.1.1.9 + taskset -c 8 ping 1.1.1.2 + taskset -c 9 ping 1.1.1.2 + taskset -c 10 ping 1.1.1.2 + taskset -c 11 ping 1.1.1.2 + taskset -c 12 ping 1.1.1.2 + taskset -c 13 ping 1.1.1.2 + taskset -c 14 ping 1.1.1.2 + taskset -c 15 ping 1.1.1.2 + +6. Check vhost related cores are waked up with l3fwd-power log, such as following:: + + L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 + ... + ... + L3FWD_POWER: lcore 15 is waked up from rx interrupt on port 0 queue 15 + +Test Case 4: wake up packed ring vhost-user cores by multi virtio-net in VMs with event idx interrupt mode and cbdma enabled test +================================================================================================================================== + +1. Bind two cbdma ports to vfio-pci driver, then launch l3fwd-power example app with client mode:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-2 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=1,client=1,dmas=[txq0@00:04.0]' \ + --vdev 'eth_vhost1,iface=/vhost-net1,queues=1,client=1,dmas=[txq0@80:04.0]' \ + -- -p 0x3 --parse-ptype 1 --config "(0,0,1),(1,0,2)" + +2. Launch VM1 and VM2 with server mode:: + + taskset -c 33 \ + qemu-system-x86_64 -name us-vhost-vm1 \ + -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \ + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu1910.img \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \ + -chardev socket,server,id=char0,path=/vhost-net0 \ + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \ + -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,csum=on,packed=on -vnc :10 -daemonize + + taskset -c 34 \ + qemu-system-x86_64 -name us-vhost-vm2 \ + -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \ + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu1910-2.img \ + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \ + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6004-:22 \ + -chardev socket,server,id=char0,path=/vhost-net1 \ + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \ + -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet1,csum=on,packed=on -vnc :11 -daemonize + +3. Relauch l3fwd-power sample for port up:: + + ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 1-2 -n 4 --log-level=9 \ + --vdev 'eth_vhost0,iface=/vhost-net0,queues=1,client=1,dmas=[txq0@00:04.0]' \ + --vdev 'eth_vhost1,iface=/vhost-net1,queues=1,client=1,dmas=[txq0@80:04.0]' \ + -- -p 0x3 --parse-ptype 1 --config "(0,0,1),(1,0,2)" + +4. On VM1, set ip for virtio device and send packets to vhost:: + + ifconfig [ens3] 1.1.1.2 + #[ens3] is the virtual device name + ping 1.1.1.3 + #send packets to vhost + +5. On VM2, also set ip for virtio device and send packets to vhost:: + + ifconfig [ens3] 1.1.1.4 + #[ens3] is the virtual device name + ping 1.1.1.5 + #send packets to vhost + +6. Check vhost related cores are waked up with l3fwd-power log. -- 2.25.1