From: Lingli Chen <linglix.chen@intel.com>
To: dts@dpdk.org
Cc: zhiminx.huang@intel.com, Lingli Chen <linglix.chen@intel.com>
Subject: [dts][PATCH V1 3/3] tests/*: add NIC IGC-I226_LM in support suits
Date: Fri, 24 Jun 2022 01:39:03 -0400 [thread overview]
Message-ID: <20220624053903.4195-4-linglix.chen@intel.com> (raw)
In-Reply-To: <20220624053903.4195-1-linglix.chen@intel.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 27741 bytes --]
add NIC IGC-I226_LM in 12 support suits
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/shutdown_api_test_plan.rst | 2 +-
tests/TestSuite_generic_flow_api.py | 26 ++++++++++++++++----
tests/TestSuite_jumboframes.py | 1 +
tests/TestSuite_mtu_update.py | 2 +-
| 1 +
| 7 +++---
tests/TestSuite_qinq_filter.py | 1 +
| 31 ++++++++++++------------
tests/TestSuite_rxtx_offload.py | 4 ++-
tests/TestSuite_shutdown_api.py | 8 +++---
tests/TestSuite_uni_pkt.py | 3 +++
tests/TestSuite_userspace_ethtool.py | 3 ++-
tests/TestSuite_vlan_ethertype_config.py | 8 +++---
13 files changed, 62 insertions(+), 35 deletions(-)
diff --git a/test_plans/shutdown_api_test_plan.rst b/test_plans/shutdown_api_test_plan.rst
index ff1b17f6..56f3f58a 100644
--- a/test_plans/shutdown_api_test_plan.rst
+++ b/test_plans/shutdown_api_test_plan.rst
@@ -241,7 +241,7 @@ Test Case 12: Change thresholds
4. Run ``port config all rxfreet 32`` to change the rx descriptors.
5. Run ``port config all txpt 64`` to change the tx descriptors.
6. Run ``port config all txht 64`` to change the tx descriptors.
-7. If NIC is IGC-I225_LM, Run ``port config all txwt 16`` to change the tx descriptors.
+7. If NIC is IGC driver, Run ``port config all txwt 16`` to change the tx descriptors.
Else, Run ``port config all txwt 0`` to change the tx descriptors.
8. Run ``port start all`` to restart all ports.
9. Check with ``show config rxtx`` that the descriptors were actually changed.
diff --git a/tests/TestSuite_generic_flow_api.py b/tests/TestSuite_generic_flow_api.py
index 0e414bbf..309e7072 100644
--- a/tests/TestSuite_generic_flow_api.py
+++ b/tests/TestSuite_generic_flow_api.py
@@ -56,7 +56,7 @@ class TestGeneric_flow_api(TestCase):
"IGB_1G-82576_QUAD_COPPER_ET2",
]:
MAX_QUEUE = 7
- elif self.nic in ["IGC-I225_LM"]:
+ elif self.nic in ["IGC-I225_LM", "IGC-I226_LM"]:
MAX_QUEUE = 3
# Based on h/w type, choose how many ports to use
self.dut_ports = self.dut.get_ports(self.nic)
@@ -921,6 +921,7 @@ class TestGeneric_flow_api(TestCase):
"IXGBE_10G-X550T",
"IGB_1G-I350_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support SYN filter" % self.nic,
)
@@ -965,7 +966,7 @@ class TestGeneric_flow_api(TestCase):
self.dut.send_expect("flow destroy 0 rule 0", "testpmd> ", 120)
# validate and create the flow rules
- q_idx = "2" if self.nic == "IGC-I225_LM" else "4"
+ q_idx = "2" if self.nic in ["IGC-I225_LM", "IGC-I226_LM"] else "4"
self.dut.send_expect(
"flow validate 0 ingress pattern eth / ipv6 / tcp flags spec 0x02 flags mask 0x02 / end actions queue index %s / end"
% (q_idx),
@@ -1007,6 +1008,7 @@ class TestGeneric_flow_api(TestCase):
"IGB_1G-82576_QUAD_COPPER_ET2",
"IGB_1G-82576_QUAD_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support n-tuple filter" % self.nic,
)
@@ -1111,6 +1113,7 @@ class TestGeneric_flow_api(TestCase):
"IGB_1G-82580_COPPER",
"IGB_1G-I350_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
"I40E_10G-SFP_XL710",
"I40E_25G-25G_SFP28",
"I40E_40G-QSFP_A",
@@ -1227,6 +1230,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"ICE_25G-E810C_SFP",
"ICE_100G-E810C_QSFP",
],
@@ -1345,6 +1349,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"ICE_25G-E810C_SFP",
"ICE_100G-E810C_QSFP",
],
@@ -2049,6 +2054,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"ICE_25G-E810C_SFP",
"ICE_100G-E810C_QSFP",
],
@@ -2383,6 +2389,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support fdir ipv4 filter" % self.nic,
)
@@ -2397,6 +2404,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"I40E_10G-10G_BASE_T_BC",
]:
self.setup_env()
@@ -2807,6 +2815,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support fdir ipv6 filter" % self.nic,
)
@@ -3447,6 +3456,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"ICE_25G-E810C_SFP",
"ICE_100G-E810C_QSFP",
],
@@ -3829,7 +3839,7 @@ class TestGeneric_flow_api(TestCase):
The filter structure is different between igb, ixgbe and i40e
"""
self.verify(
- self.nic in ["IGB_1G-82580_COPPER", "IGB_1G-I350_COPPER", "IGC-I225_LM"],
+ self.nic in ["IGB_1G-82580_COPPER", "IGB_1G-I350_COPPER", "IGC-I225_LM", "IGC-I226_LM"],
"%s nic not support flexbytes filter" % self.nic,
)
@@ -4044,6 +4054,7 @@ class TestGeneric_flow_api(TestCase):
"IXGBE_10G-X550EM_X_10G_T",
"IXGBE_10G-X550T",
"IGC-I225_LM",
+ "IGC-I226_LM",
"I40E_10G-SFP_XL710",
"I40E_25G-25G_SFP28",
"I40E_40G-QSFP_A",
@@ -4118,6 +4129,7 @@ class TestGeneric_flow_api(TestCase):
"ICE_25G-E810C_SFP",
"ICE_100G-E810C_QSFP",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support fdir vxlan filter" % self.nic,
)
@@ -4164,7 +4176,7 @@ class TestGeneric_flow_api(TestCase):
only supported by ixgbe
"""
self.verify(
- self.nic in ["IXGBE_10G-X550EM_X_10G_T", "IXGBE_10G-X550T", "IGC-I225_LM"],
+ self.nic in ["IXGBE_10G-X550EM_X_10G_T", "IXGBE_10G-X550T", "IGC-I225_LM", "IGC-I226_LM"],
"%s nic not support fdir nvgre filter" % self.nic,
)
@@ -4221,6 +4233,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"I40E_10G-10G_BASE_T_BC",
],
"%s nic not support tunnel vxlan filter" % self.nic,
@@ -4392,6 +4405,7 @@ class TestGeneric_flow_api(TestCase):
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IGC-I225_LM",
+ "IGC-I226_LM",
"I40E_10G-10G_BASE_T_BC",
],
"%s nic not support tunnel nvgre filter" % self.nic,
@@ -4717,6 +4731,7 @@ class TestGeneric_flow_api(TestCase):
"IGB_1G-82576_QUAD_COPPER_ET2",
"IGB_1G-82576_QUAD_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support n-tuple filter" % self.nic,
)
@@ -4851,10 +4866,11 @@ class TestGeneric_flow_api(TestCase):
"IXGBE_10G-X550T",
"IGB_1G-I350_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support" % self.nic,
)
- if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM"]:
+ if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM", "IGC-I226_LM"]:
self.pmdout.start_testpmd(
"%s" % self.cores,
"--disable-rss --rxq=4 --txq=4 --portmask=%s --nb-cores=4 --nb-ports=1 --mbcache=200 --mbuf-size=2048 --max-pkt-len=9200"
diff --git a/tests/TestSuite_jumboframes.py b/tests/TestSuite_jumboframes.py
index 08963b72..fa2496a3 100644
--- a/tests/TestSuite_jumboframes.py
+++ b/tests/TestSuite_jumboframes.py
@@ -228,6 +228,7 @@ class TestJumboframes(TestCase):
"IGB_1G-I210_COPPER",
"IGB_1G-82576_QUAD_COPPER_ET2",
"IGC-I225_LM",
+ "IGC-I226_LM",
]:
self.jumboframes_send_packet(ETHER_JUMBO_FRAME_MTU + 4 + 1, False)
else:
diff --git a/tests/TestSuite_mtu_update.py b/tests/TestSuite_mtu_update.py
index 137abf58..5cf4688f 100644
--- a/tests/TestSuite_mtu_update.py
+++ b/tests/TestSuite_mtu_update.py
@@ -224,7 +224,7 @@ class TestMtuUpdate(TestCase):
On 1G NICs, when the jubmo frame MTU set > 1500, the software adjust it to MTU+4.
"""
if (
- self.nic in ["IGB_1G-I350_COPPER", "IGB_1G-I210_COPPER", "IGC-I225_LM"]
+ self.nic in ["IGB_1G-I350_COPPER", "IGB_1G-I210_COPPER", "IGC-I225_LM", "IGC-I226_LM"]
and packet_size > 1500
):
self.send_packet_of_size_to_tx_port(packet_size + 8 - 1, received=True)
--git a/tests/TestSuite_pmdrss_hash.py b/tests/TestSuite_pmdrss_hash.py
index befb9bce..da9d143a 100644
--- a/tests/TestSuite_pmdrss_hash.py
+++ b/tests/TestSuite_pmdrss_hash.py
@@ -487,6 +487,7 @@ class TestPmdrssHash(TestCase):
"ICE_100G-E810C_QSFP",
"IXGBE_10G-82599_SFP",
"IGC-I225_LM",
+ "IGC-I226_LM",
]
)
def set_up_all(self):
--git a/tests/TestSuite_pmdrssreta.py b/tests/TestSuite_pmdrssreta.py
index c4bc1ee4..b3a7214b 100644
--- a/tests/TestSuite_pmdrssreta.py
+++ b/tests/TestSuite_pmdrssreta.py
@@ -150,7 +150,7 @@ class TestPmdrssreta(TestCase):
hash_index = int(tmp_reta_line["RSS hash"], 16) % 64
elif self.nic in ["hi1822"]:
hash_index = int(tmp_reta_line["RSS hash"], 16) % 256
- elif self.nic in ["IXGBE_10G-82599_SFP", "IGC-I225_LM", "IXGBE_10G-X540T"]:
+ elif self.nic in ["IXGBE_10G-82599_SFP", "IGC-I226_LM", "IGC-I225_LM", "IXGBE_10G-X540T"]:
# compute the hash result of five tuple into the 7 LSBs value.
hash_index = int(tmp_reta_line["RSS hash"], 16) % 128
else:
@@ -212,7 +212,7 @@ class TestPmdrssreta(TestCase):
self.dut.kill_all()
global testQueues
- if self.nic == "IGC-I225_LM":
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM"]:
testQueues = [2]
# test with different rss queues
for queue in testQueues:
@@ -258,7 +258,7 @@ class TestPmdrssreta(TestCase):
"port config 0 rss reta (%d,%d)" % (i, reta_entries[i]),
"testpmd> ",
)
- elif self.nic in ["IXGBE_10G-82599_SFP", "IGC-I225_LM"]:
+ elif self.nic in ["IXGBE_10G-82599_SFP", "IGC-I225_LM", "IGC-I226_LM"]:
for i in range(128):
reta_entries.insert(i, random.randint(0, queue - 1))
self.dut.send_expect(
@@ -296,6 +296,7 @@ class TestPmdrssreta(TestCase):
"IXGBE_10G-X550EM_X_10G_T": 40,
"IXGBE_10G-X550T": 40,
"IGC-I225_LM": 40,
+ "IGC-I226_LM": 40,
"IXGBE_10G-X540T": 40,
}
self.verify(
diff --git a/tests/TestSuite_qinq_filter.py b/tests/TestSuite_qinq_filter.py
index bf4d9a4d..6b5b756c 100644
--- a/tests/TestSuite_qinq_filter.py
+++ b/tests/TestSuite_qinq_filter.py
@@ -33,6 +33,7 @@ class TestQinqFilter(TestCase):
"I40E_40G-QSFP_B",
"I40E_25G-25G_SFP28",
"IGC-I225_LM",
+ "IGC-I226_LM",
"I40E_10G-10G_BASE_T_BC",
],
"NIC %s not support this test" % self.nic,
--git a/tests/TestSuite_rss_to_rte_flow.py b/tests/TestSuite_rss_to_rte_flow.py
index 83055188..044f3755 100644
--- a/tests/TestSuite_rss_to_rte_flow.py
+++ b/tests/TestSuite_rss_to_rte_flow.py
@@ -1530,7 +1530,7 @@ class TestRSS_to_Rteflow(TestCase):
],
"NIC Unsupported: " + str(self.nic),
)
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.pmdout.start_testpmd(
"%s" % self.cores, "--rxq=4 --txq=4 --port-topology=chained"
)
@@ -1544,7 +1544,7 @@ class TestRSS_to_Rteflow(TestCase):
time.sleep(2)
# Create a rss queue rule
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.dut.send_expect(
"flow create 0 ingress pattern end actions rss queues 1 2 end / end",
"created",
@@ -1567,7 +1567,7 @@ class TestRSS_to_Rteflow(TestCase):
"ipv6-tcp",
"ipv6-sctp",
]
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.send_check_100_packet_queue(ptype_list1, ["1", "2"], port_id=0)
else:
self.send_check_100_packet_queue(ptype_list1, ["1", "4", "7"], port_id=0)
@@ -1608,7 +1608,7 @@ class TestRSS_to_Rteflow(TestCase):
"flow create 0 ingress pattern end actions rss queues 8 end / end", "error"
)
# Set all the queues to the rule
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.dut.send_expect(
"flow create 0 ingress pattern end actions rss queues 0 1 2 3 end / end",
"created",
@@ -1639,7 +1639,7 @@ class TestRSS_to_Rteflow(TestCase):
],
"NIC Unsupported: " + str(self.nic),
)
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.pmdout.start_testpmd(
"%s" % self.cores, "--rxq=4 --txq=4 --port-topology=chained"
)
@@ -1653,7 +1653,7 @@ class TestRSS_to_Rteflow(TestCase):
time.sleep(2)
# Create a rss queue rule
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.dut.send_expect(
"flow create 0 ingress pattern end actions rss types udp ipv4-tcp ipv6-sctp ipv4-other end queues 1 2 3 end / end",
"created",
@@ -1680,7 +1680,7 @@ class TestRSS_to_Rteflow(TestCase):
# send the packets and verify the results
if self.nic in ["cavium_a063", "cavium_a064"]:
self.send_check_100_packet_queue(ptype_list1, ["1", "4", "7"], port_id=0)
- elif self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ elif self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.send_check_100_packet_queue(ptype_list1, ["1", "2", "3"], port_id=0)
self.send_check_100_packet_queue(ptype_list2, "0", port_id=0)
else:
@@ -1690,7 +1690,7 @@ class TestRSS_to_Rteflow(TestCase):
# Create different ptype rss rule.
self.dut.send_expect("flow flush 0", "testpmd> ")
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.dut.send_expect(
"flow create 0 ingress pattern end actions rss types ipv4 ipv6 end queues 1 3 end / end",
"created",
@@ -1713,7 +1713,7 @@ class TestRSS_to_Rteflow(TestCase):
"ipv6-tcp",
"ipv6-sctp",
]
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.send_check_100_packet_queue(ptype_list3, ["1", "3"], port_id=0)
else:
self.send_check_100_packet_queue(ptype_list3, ["3", "7"], port_id=0)
@@ -1737,7 +1737,7 @@ class TestRSS_to_Rteflow(TestCase):
],
"NIC Unsupported: " + str(self.nic),
)
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.pmdout.start_testpmd(
"%s" % self.cores,
"--rxq=4 --txq=4 --disable-rss --port-topology=chained",
@@ -1778,7 +1778,7 @@ class TestRSS_to_Rteflow(TestCase):
self.send_check_100_packet_queue(ptype_list1, "0", port_id=0)
# Create a rss queue rule
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.dut.send_expect(
"flow create 0 ingress pattern end actions rss types ipv6-tcp ipv4-udp end queues 1 2 3 end / end",
"created",
@@ -1802,7 +1802,7 @@ class TestRSS_to_Rteflow(TestCase):
"ipv6-udp",
"ipv6-sctp",
]
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.send_check_100_packet_queue(ptype_list2, ["1", "2", "3"], port_id=0)
else:
self.send_check_100_packet_queue(ptype_list2, ["5", "6", "7"], port_id=0)
@@ -1827,7 +1827,7 @@ class TestRSS_to_Rteflow(TestCase):
],
"NIC Unsupported: " + str(self.nic),
)
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.pmdout.start_testpmd(
"%s" % self.cores,
"--rxq=4 --txq=4 --disable-rss --port-topology=chained",
@@ -1842,7 +1842,7 @@ class TestRSS_to_Rteflow(TestCase):
time.sleep(2)
# Create a rss queue rule
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.dut.send_expect(
"flow create 0 ingress pattern end actions rss types ipv4-udp end queues 2 3 end / end",
"created",
@@ -1861,6 +1861,7 @@ class TestRSS_to_Rteflow(TestCase):
"IGB_1G-I350_COPPER",
"IGB_1G-I210_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
]:
self.dut.send_expect(
"flow create 0 ingress pattern eth / ipv4 proto is 17 / udp dst is 50 / end actions queue index 1 / end",
@@ -1875,7 +1876,7 @@ class TestRSS_to_Rteflow(TestCase):
self.send_and_check(self.pkt2, ["1"], port_id=0)
# Delete the fdir rule
self.dut.send_expect("flow destroy 0 rule 1", "testpmd> ")
- if self.nic in ["IGC-I225_LM", "IGB_1G-I210_COPPER"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM", "IGB_1G-I210_COPPER"]:
self.send_and_check(self.pkt2, ["2", "3"], port_id=0)
else:
self.send_and_check(self.pkt2, ["3", "4", "5"], port_id=0)
diff --git a/tests/TestSuite_rxtx_offload.py b/tests/TestSuite_rxtx_offload.py
index 3f56993e..a430997d 100644
--- a/tests/TestSuite_rxtx_offload.py
+++ b/tests/TestSuite_rxtx_offload.py
@@ -73,6 +73,7 @@ class TestRxTx_Offload(TestCase):
"IXGBE_10G-X550EM_X_10G_T",
"IXGBE_10G-X550T",
"IGC-I225_LM",
+ "IGC-I226_LM",
"cavium_a063",
"cavium_a064",
"ICE_25G-E810C_SFP",
@@ -493,7 +494,7 @@ class TestRxTx_Offload(TestCase):
capabilities = self.check_port_capability("rx")
for capability in capabilities:
if (
- self.nic in ["IGC-I225_LM", "cavium_a063", "cavium_a064"]
+ self.nic in ["IGC-I225_LM", "IGC-I226_LM", "cavium_a063", "cavium_a064"]
and capability == "sctp_cksum"
):
continue
@@ -523,6 +524,7 @@ class TestRxTx_Offload(TestCase):
"IXGBE_10G-X550EM_X_10G_T",
"IXGBE_10G-X550T",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"%s nic not support rx offload setting by queue." % self.nic,
)
diff --git a/tests/TestSuite_shutdown_api.py b/tests/TestSuite_shutdown_api.py
index 245c49da..1019b7ad 100644
--- a/tests/TestSuite_shutdown_api.py
+++ b/tests/TestSuite_shutdown_api.py
@@ -823,7 +823,7 @@ class TestShutdownApi(TestCase):
Change RX/TX thresholds
DPDK-24129:1.Intel® Ethernet 700/800 Series not support tx and rx
2.Ixgbe not support rx, only support tx.
- 3.IGC-I225_LM, IGB_1G-I350_COPPER and IGB_1G-I210_COPPER not support txfree and txrs
+ 3.IGC-I225_LM, IGC-I226_LM, IGB_1G-I350_COPPER and IGB_1G-I210_COPPER not support txfree and txrs
"""
self.pmdout.start_testpmd(
"Default",
@@ -844,7 +844,7 @@ class TestShutdownApi(TestCase):
self.dut.send_expect("port config all rxfreet 32", "testpmd> ")
self.dut.send_expect("port config all txpt 64", "testpmd> ")
self.dut.send_expect("port config all txht 64", "testpmd> ")
- if self.nic in ["IGC-I225_LM"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM"]:
self.dut.send_expect("port config all txwt 16", "testpmd> ")
else:
self.dut.send_expect("port config all txwt 0", "testpmd> ")
@@ -869,7 +869,7 @@ class TestShutdownApi(TestCase):
)
self.verify("pthresh=64" in out, "TX descriptor not reconfigured properly")
self.verify("hthresh=64" in out, "TX descriptor not reconfigured properly")
- if self.nic in ["IGC-I225_LM"]:
+ if self.nic in ["IGC-I225_LM", "IGC-I226_LM",]:
self.verify("wthresh=16" in out, "TX descriptor not reconfigured properly")
else:
self.verify("wthresh=0" in out, "TX descriptor not reconfigured properly")
@@ -947,7 +947,7 @@ class TestShutdownApi(TestCase):
When tx_descriptor_status is used, status can be “FULL”, “DONE” or “UNAVAILABLE.”
"""
queue_num = 16
- if self.nic in ["IGB_1G-I210_COPPER", "IGC-I225_LM"]:
+ if self.nic in ["IGB_1G-I210_COPPER", "IGC-I225_LM", "IGC-I226_LM"]:
queue_num = 4
if self.nic in ["IGB_1G-I350_COPPER"]:
queue_num = 8
diff --git a/tests/TestSuite_uni_pkt.py b/tests/TestSuite_uni_pkt.py
index 26cb7556..b7950830 100644
--- a/tests/TestSuite_uni_pkt.py
+++ b/tests/TestSuite_uni_pkt.py
@@ -125,6 +125,7 @@ class TestUniPacket(TestCase):
or "IXGBE_10G-X550EM_X_10G_T" in self.nic
or "IGB_1G-I210_COPPER" in self.nic
or "IGC-I225_LM" in self.nic
+ or "IGC-I226_LM" in self.nic
):
outerL4Type = ""
ipv4_default_packet_type = ["L2_ETHER", "L3_IPV4"]
@@ -187,6 +188,7 @@ class TestUniPacket(TestCase):
or "IXGBE_10G-X550EM_X_10G_T" in self.nic
or "IGB_1G-I210_COPPER" in self.nic
or "IGC-I225_LM" in self.nic
+ or "IGC-I226_LM" in self.nic
):
outerL4Type = ""
ipv6_default_packet_type = ["L2_ETHER", "L3_IPV6"]
@@ -287,6 +289,7 @@ class TestUniPacket(TestCase):
"I40E_40G-QSFP_B",
"I40E_10G-10G_BASE_T_BC",
"IGC-I225_LM",
+ "IGC-I226_LM",
],
"not support %s" % self.nic,
)
diff --git a/tests/TestSuite_userspace_ethtool.py b/tests/TestSuite_userspace_ethtool.py
index 7129301e..3a751cd9 100644
--- a/tests/TestSuite_userspace_ethtool.py
+++ b/tests/TestSuite_userspace_ethtool.py
@@ -570,7 +570,7 @@ class TestUserspaceEthtool(TestCase):
mtus = [1519, 2048]
mtu_threshold = 2022
offset = 0
- if self.nic in ["IGB_1G-I350_COPPER", "IGB_1G-I210_COPPER", "IGC-I225_LM"]:
+ if self.nic in ["IGB_1G-I350_COPPER", "IGB_1G-I210_COPPER", "IGC-I225_LM", "IGC-I226_LM"]:
mtu_threshold = 2026
offset = 4
# RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + ICE_VLAN_TAG_SIZE * 2
@@ -593,6 +593,7 @@ class TestUserspaceEthtool(TestCase):
"IGB_1G-I350_COPPER",
"IGB_1G-I210_COPPER",
"IGC-I225_LM",
+ "IGC-I226_LM",
]:
mtu = mtu_threshold
self.dut.send_expect("stop %s" % index, "EthApp>")
diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py
index 5c43e3bb..409adf2a 100644
--- a/tests/TestSuite_vlan_ethertype_config.py
+++ b/tests/TestSuite_vlan_ethertype_config.py
@@ -181,7 +181,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
rx_vlans = [1, random_vlan, MAX_VLAN]
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM"]:
+ if self.nic in ["cavium_a063", "cavium_a064", "IGC-I226_LM", "IGC-I225_LM"]:
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
@@ -214,7 +214,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("start", "testpmd> ")
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM", "IGC-I225_LM"]:
+ if self.nic in ["cavium_a063", "cavium_a064", "IGC-I226_LM", "IGC-I225_LM"]:
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
@@ -247,7 +247,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("start", "testpmd> ", 20)
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM"]:
+ if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM", "IGC-I226_LM"]:
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
@@ -277,7 +277,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("start", "testpmd> ")
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM"]:
+ if self.nic in ["cavium_a063", "cavium_a064", "IGC-I225_LM", "IGC-I226_LM"]:
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
--
2.17.1
prev parent reply other threads:[~2022-06-24 6:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-24 5:39 [dts][PATCH V1 0/3] add NIC IGC-I226_LM in support cases Lingli Chen
2022-06-24 5:39 ` [dts][PATCH V1 1/3] framework: add NIC IGC-I226_LM identifiers Lingli Chen
2022-06-24 5:39 ` [dts][PATCH V1 2/3] conf/test_case_*: add NIC IGC-I226_LM in support cases Lingli Chen
2022-06-24 5:39 ` Lingli Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220624053903.4195-4-linglix.chen@intel.com \
--to=linglix.chen@intel.com \
--cc=dts@dpdk.org \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).