From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id B91AFA00C4; Tue, 16 Aug 2022 08:10:10 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 94C5A410D3; Tue, 16 Aug 2022 08:10:10 +0200 (CEST) Received: from mga17.intel.com (mga17.intel.com [192.55.52.151]) by mails.dpdk.org (Postfix) with ESMTP id CACC44068E for ; Tue, 16 Aug 2022 08:10:06 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1660630207; x=1692166207; h=from:to:cc:subject:date:message-id:mime-version: content-transfer-encoding; bh=35jkgLb4ahKF5PdnTmX8Roe5HsOsyO2clh1yY+dO0WY=; b=hfSL4LW9OGo/UVyM1GWMnqauKqLEPt3s30FlVrF6olPGKPIHuqVHjki+ JySdy+ZUEnmHPVzOqJi+51ZEv060y3aMvM6XtmK60pzaQ48lqFB/InmRg Tg7QyrzkTxaZUKyLEefq3FPzPCon+mu3tvSG/W3+Hh3k08+hhH8F5LYcB d31WUbDuD3Ky57NepIaKu4FTVlAVdTJGCjORAPmANCgmfO4E8AnZeU9kV 1vrCPxU/543NgRCJE6IqVIhibCLZ5DD3IIYJNDNlHXoh6c81+X8UaQ3eM wbi4FxgwDTZtF/1GO9Rje0Rh/udT9PjymZVCexJF94MAmeulPi3o0A77P Q==; X-IronPort-AV: E=McAfee;i="6400,9594,10440"; a="272526795" X-IronPort-AV: E=Sophos;i="5.93,240,1654585200"; d="scan'208,223";a="272526795" Received: from fmsmga008.fm.intel.com ([10.253.24.58]) by fmsmga107.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 15 Aug 2022 23:09:52 -0700 X-IronPort-AV: E=Sophos;i="5.93,240,1654585200"; d="scan'208,223";a="666969443" Received: from unknown (HELO localhost.localdomain) ([10.239.252.222]) by fmsmga008-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 15 Aug 2022 23:09:48 -0700 From: Wei Ling To: dts@dpdk.org Cc: Wei Ling Subject: [dts][PATCH V4 1/2] test_plans/vm2vm_virtio_user_cbdma_test_plan: modify testplan to test virito dequeue Date: Tue, 16 Aug 2022 02:05:40 -0400 Message-Id: <20220816060540.3417993-1-weix.ling@intel.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org >From DPDK-22.07, virtio support async dequeue for split and packed ring path, so modify vm2vm_virtio_user_cbdma testplan to test the split and packed ring async dequeue feature. Signed-off-by: Wei Ling --- .../vm2vm_virtio_user_cbdma_test_plan.rst | 1013 ++++++++--------- 1 file changed, 445 insertions(+), 568 deletions(-) diff --git a/test_plans/vm2vm_virtio_user_cbdma_test_plan.rst b/test_plans/vm2vm_virtio_user_cbdma_test_plan.rst index 3fd04592..8fd170f9 100644 --- a/test_plans/vm2vm_virtio_user_cbdma_test_plan.rst +++ b/test_plans/vm2vm_virtio_user_cbdma_test_plan.rst @@ -1,6 +1,7 @@ .. SPDX-License-Identifier: BSD-3-Clause Copyright(c) 2022 Intel Corporation + ================================================== VM2VM vhost-user/virtio-user with CBDMA test plan ================================================== @@ -10,16 +11,16 @@ Description Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way. In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA -channels and one DMA channel can be shared by multiple vrings at the same time.Vhost enqueue operation with CBDMA channels is supported -in both split and packed ring. +channels and one DMA channel can be shared by multiple vrings at the same time. From DPDK22.07, Vhost enqueue and dequeue operation with +CBDMA channels is supported in both split and packed ring. This document provides the test plan for testing the following features when Vhost-user using asynchronous data path with CBDMA channels in VM2VM virtio-user topology. 1. Split virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test and payload check. 2. Packed virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vectorized path (ringsize not powerof 2) test and payload check. -3. Test indirect descriptor feature. -For example, the split ring mergeable inorder path use non-indirect descriptor, the 2000,2000,2000,2000 chain packets will need 4 consequent ring, -still need one ring put header. +3. Test indirect descriptor feature. +For example, the split ring mergeable inorder path use non-indirect descriptor, the 2000,2000,2000,2000 chain packets will need 4 consequent ring, +still need one ring put header. The split ring mergeable path use indirect descriptor, the 2000,2000,2000,2000 chain packets will only occupy one ring. Note: @@ -43,24 +44,24 @@ General set up -------------- 1. Compile DPDK:: - # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library= - # ninja -C -j 110 - For example: - CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc - ninja -C x86_64-native-linuxapp-gcc -j 110 + # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static + # ninja -C -j 110 + For example: + CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc + ninja -C x86_64-native-linuxapp-gcc -j 110 2. Get the PCI device ID and DMA device ID of DUT, for example, 0000:18:00.0 is PCI device ID, 0000:00:04.0, 0000:00:04.1 is DMA device ID:: - # ./usertools/dpdk-devbind.py -s + # ./usertools/dpdk-devbind.py -s - Network devices using kernel driver - =================================== - 0000:18:00.0 'Device 159b' if=ens785f0 drv=ice unused=vfio-pci + Network devices using kernel driver + =================================== + 0000:18:00.0 'Device 159b' if=ens785f0 drv=ice unused=vfio-pci - DMA devices using kernel driver - =============================== - 0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci - 0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci + DMA devices using kernel driver + =============================== + 0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci + 0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci Test case ========= @@ -69,46 +70,43 @@ Common steps ------------ 1. Bind 1 NIC port and CBDMA channels to vfio-pci:: - # ./usertools/dpdk-devbind.py -b vfio-pci - # ./usertools/dpdk-devbind.py -b vfio-pci - - For example, 2 CBDMA channels: - # ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0,0000:00:04.1 + # ./usertools/dpdk-devbind.py -b vfio-pci + # ./usertools/dpdk-devbind.py -b vfio-pci -Test Case 1: split virtqueue vm2vm non-mergeable path multi-queues payload check with cbdma enable --------------------------------------------------------------------------------------------------- -This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring non-mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. + For example, 2 CBDMA channels: + # ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0,0000:00:04.1 -1. Bind 2 CBDMA channel to vfio-pci, as common step 1. +Test Case 1: VM2VM split ring non-mergeable path multi-queues payload check with cbdma enable +--------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring non-mergeable path +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ -- -i --enable-hw-vlan-strip --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets:: +4. Launch virtio-user0 and send packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ -- -i --enable-hw-vlan-strip --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set burst 1 testpmd>set txpkts 64,128,256,512 @@ -121,233 +119,150 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 1 testpmd>stop -6. Start vhost testpmd, check virtio-user1 RX-packets is 566 and RX-bytes is 486016, 54 packets with 960 length and 512 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: +5. Start vhost testpmd, check virtio-user1 RX-packets is 566 and RX-bytes is 486016, 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ - --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1] - -10. Rerun step 3. - -11. Virtio-user0 send packets:: - - testpmd>set burst 1 - testpmd>set txpkts 64,128,256,512 - testpmd>start tx_first 27 - testpmd>stop - testpmd>set burst 32 - testpmd>start tx_first 7 - testpmd>stop - testpmd>set txpkts 64 - testpmd>start tx_first 1 - testpmd>stop - -12. Rerun step 6. +7. Quit and relaunch vhost with iova=pa by below command:: -Test Case 2: split virtqueue vm2vm mergeable path multi-queues payload check with cbdma enable ----------------------------------------------------------------------------------------------- -This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. - -1. Bind 1 CBDMA channel to vfio-pci, as common step 1. + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ + --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1] -2. Launch vhost by below command:: +8. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ - --lcore-dma=[lcore11@0000:00:04.0] - -3. Launch virtio-user1 by below command:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=4096 \ - -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 - testpmd>set fwd rxonly - testpmd>start + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +9. Virtio-user0 send packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - -5. Launch virtio-user0 and send packets:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=4096 \ - -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>set txpkts 64,128,256,512 testpmd>start tx_first 27 testpmd>stop testpmd>set burst 32 - testpmd>set txpkts 64 testpmd>start tx_first 7 testpmd>stop - -6. Start vhost testpmd, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: - - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: - + testpmd>set txpkts 64 + testpmd>start tx_first 1 testpmd>stop - testpmd>clear port stats all - testpmd>start - -9. Relaunch vhost with iova=pa by below command:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ - --lcore-dma=[lcore11@0000:00:04.0] - -10. Rerun step 3. - -11. Virtio-user0 send packets:: - - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop -12. Rerun step 6. +10. Rerun step 5. -Test Case 3: split virtqueue vm2vm inorder non-mergeable path multi-queues payload check with cbdma enable ----------------------------------------------------------------------------------------------------------- +Test Case 2: VM2VM split ring inorder non-mergeable path multi-queues payload check with cbdma enable +----------------------------------------------------------------------------------------------------- This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring inorder non-mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -1. Bind 5 CBDMA channel to vfio-pci, as common step 1. +1. Launch vhost by below command:: -2. Launch vhost by below command:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets:: +4. Launch virtio-user0 and send packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop - testpmd>set burst 32 testpmd>set txpkts 64 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 testpmd>start tx_first 7 testpmd>stop + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 1 + testpmd>stop -6. Start vhost testpmd, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: - - testpmd>quit +5. Start vhost testpmd, check 502 packets and 32128 bytes received by virtio-user1 and 502 packets with 64 length in pdump-virtio-rx.pcap. -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 +9. Virtio-user0 send packets:: + + testpmd>set burst 1 testpmd>start tx_first 27 testpmd>stop - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 1 + testpmd>stop -12. Rerun step 6. +10. Rerun step 5. -Test Case 4: split virtqueue vm2vm vectorized path multi-queues payload check with cbdma enable ------------------------------------------------------------------------------------------------ +Test Case 3: VM2VM split ring vectorized path multi-queues payload check with cbdma enable +------------------------------------------------------------------------------------------ This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring vectorized path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -1. Bind 8 CBDMA channel to vfio-pci, as common step 1. +1. Launch vhost by below command:: -2. Launch vhost by below command:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets:: +4. Launch virtio-user0 and send packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,mrg_rxbuf=0,in_order=0,,vectorized=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 32 testpmd>set txpkts 64 testpmd>start tx_first 7 @@ -357,80 +272,76 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 27 testpmd>stop -6. Start vhost testpmd, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: +5. Start vhost testpmd, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop +9. Virtio-user0 send packets:: + + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop -12. Rerun step 6. +10. Rerun step 5. -Test Case 5: Split virtqueue vm2vm inorder mergeable path test non-indirect descriptor with cbdma enable --------------------------------------------------------------------------------------------------------- +Test Case 4: VM2VM split ring inorder mergeable path test non-indirect descriptor with cbdma enable +--------------------------------------------------------------------------------------------------- This case uses testpmd to test the payload is valid and non-indirect descriptor after packets forwarding in vhost-user/virtio-user -split ring inorder mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both +split ring inorder mergeable path and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -1. Bind 4 CBDMA channel to vfio-pci, as common step 1. - -2. Launch testpmd by below command:: +1. Launch testpmd by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,mrg_rxbuf=1,in_order=1,queue_size=256 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets(include 251 small packets and 32 8K packets):: +4. Launch virtio-user0 and send packets(include 251 small packets and 32 8K packets):: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,mrg_rxbuf=1,in_order=1,queue_size=256 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 testpmd>set burst 1 + testpmd>set txpkts 64 testpmd>start tx_first 27 testpmd>stop testpmd>set burst 32 @@ -440,59 +351,54 @@ iova as VA and PA mode test. testpmd>start tx_first 1 testpmd>stop -6. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the non-indirect descriptors, -the 8k length pkt will occupies 5 ring:2000,2000,2000,2000 will need 4 consequent ring, +5. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the non-direct descriptors, the 8k length pkt will occupies 5 ring:2000,2000,2000,2000 will need 4 consequent ring, still need one ring put header. So check 504 packets and 48128 bytes received by virtio-user1 and 502 packets with 64 length and 2 packets with 8K length in pdump-virtio-rx.pcap. -7. Relaunch vhost with iova=pa by below command:: +6. Relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3] -8. Rerun step 3-6. +7. Rerun step 2-5. -Test Case 6: Split virtqueue vm2vm mergeable path test indirect descriptor with cbdma enable --------------------------------------------------------------------------------------------- +Test Case 5: VM2VM split ring mergeable path test indirect descriptor with cbdma enable +--------------------------------------------------------------------------------------- This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user -split ring mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both -iova as VA and PA mode test. - -1. Bind 4 CBDMA channel to vfio-pci, as common step 1. +split ring mergeable path and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch testpmd by below command:: +1. Launch testpmd by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ - --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=256 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,mrg_rxbuf=1,in_order=0,queue_size=256 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets(include 251 small packets and 32 8K packets):: +4. Launch virtio-user0 and send packets(include 251 small packets and 32 8K packets):: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=256 \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,mrg_rxbuf=1,in_order=0,queue_size=256 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 testpmd>set burst 1 + testpmd>set txpkts 64 testpmd>start tx_first 27 testpmd>stop testpmd>set burst 32 @@ -502,55 +408,53 @@ iova as VA and PA mode test. testpmd>start tx_first 1 testpmd>stop -6. Start vhost, then quit pdump and three testpmd, about split virtqueue mergeable path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. +5. Start vhost, then quit pdump and three testpmd, about split virtqueue mergeable path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap. -7. Relaunch vhost with iova=pa by below command:: +6. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3] -8. Rerun step 3-6. +7. Rerun step 2-5. -Test Case 7: packed virtqueue vm2vm non-mergeable path multi-queues payload check with cbdma enable ---------------------------------------------------------------------------------------------------- +Test Case 6: VM2VM packed ring non-mergeable path multi-queues payload check with cbdma enable +---------------------------------------------------------------------------------------------- This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring non-mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -1. Bind 2 CBDMA channel to vfio-pci, as common step 1. +1. Launch vhost by below command:: -2. Launch vhost by below command:: - - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ --iova=va -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets:: +4. Launch virtio-user0 and send packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 32 testpmd>set txpkts 64 testpmd>start tx_first 7 @@ -560,73 +464,70 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 27 testpmd>stop -6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 448 and RX-bytes is 28672, 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: +5. Start vhost testpmd, check virtio-user1 RX-packets is 448 and RX-bytes is 28672, 448 packets with 64 length in pdump-virtio-rx.pcap. - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ --iova=pa -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop +9. Virtio-user0 send packets:: -12. Rerun step 6. + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop -Test Case 8: packed virtqueue vm2vm mergeable path multi-queues payload check with cbdma enable ------------------------------------------------------------------------------------------------ -This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +10. Rerun step 5. -1. Bind 1 CBDMA channel to vfio-pci, as common step 1. +Test Case 7: VM2VM packed ring mergeable path multi-queues payload check with cbdma enable +------------------------------------------------------------------------------------------ +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring mergeable path +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ --iova=va -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send packets:: +4. Launch virtio-user0 and send packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set burst 1 testpmd>set txpkts 64,256,2000,64,256,2000 @@ -637,74 +538,71 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 7 testpmd>stop -6. Start vhost testpmd, then quit pdump, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. +5. Start vhost testpmd, then quit pdump, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. -7. Quit vhost testpmd:: - - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ --iova=pa -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop +9. Virtio-user0 send packets:: -12. Rerun step 6. + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop -Test Case 9: packed virtqueue vm2vm inorder mergeable path multi-queues payload check with cbdma enable -------------------------------------------------------------------------------------------------------- -This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +10. Rerun step 5. -1. Bind 5 CBDMA channel to vfio-pci, as common step 1. +Test Case 8: VM2VM packed ring inorder mergeable path multi-queues payload check with cbdma enable +-------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder mergeable path +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send 8k length packets:: +4. Launch virtio-user0 and send 8k length packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set burst 1 testpmd>set txpkts 64,256,2000,64,256,2000 @@ -715,76 +613,74 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 7 testpmd>stop -6. Start vhost testpmd, then quit pdump, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: +5. Start vhost testpmd, then quit pdump, check 502 packets and 279232 bytes received by virtio-user1 and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop +9. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop -12. Rerun step 6. +10. Rerun step 5. -Test Case 10: packed virtqueue vm2vm inorder non-mergeable path multi-queues payload check with cbdma enable ------------------------------------------------------------------------------------------------------------- +Test Case 9: VM2VM packed ring inorder non-mergeable path multi-queues payload check with cbdma enable +------------------------------------------------------------------------------------------------------ This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder non-mergeable path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. - -1. Bind 8 CBDMA channel to vfio-pci, as common step 1. +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq1;rxq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send 8k length packets:: +4. Launch virtio-user0 and send 8k length packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 \ + --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 32 testpmd>set txpkts 64 testpmd>start tx_first 7 @@ -794,75 +690,69 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 27 testpmd>stop -6. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: - - testpmd>quit +5. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq1;rxq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop +9. Virtio-user0 send packets:: -12. Rerun step 6. + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop -Test Case 11: packed virtqueue vm2vm vectorized-rx path multi-queues payload check with indirect descriptor and cbdma enable ----------------------------------------------------------------------------------------------------------------------------- -This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring vectorizedi-rx path -and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +10. Rerun step 5. -1. Bind 8 CBDMA channel to vfio-pci, as common step 1. +Test Case 10: VM2VM packed ring vectorized-rx path multi-queues payload check with cbdma enable +----------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring vectorized-rx path +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq1;rxq1]' \ --iova=va -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore12@0000:00:04.4,lcore12@0000:00:04.5,lcore12@0000:00:04.6,lcore12@0000:00:04.7] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send 8k length packets:: +4. Launch virtio-user0 and send 8k length packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4096 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4096 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 testpmd>set burst 32 @@ -874,75 +764,70 @@ and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA testpmd>start tx_first 27 testpmd>stop -6. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. +5. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. -7. Quit vhost testpmd:: - - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq1;rxq1]' \ --iova=pa -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ - --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore12@0000:00:04.3,lcore12@0000:00:04.4,lcore12@0000:00:04.5,lcore12@0000:00:04.6,lcore12@0000:00:04.7] + --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore12@0000:00:04.4,lcore12@0000:00:04.5,lcore12@0000:00:04.6,lcore12@0000:00:04.7] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop +9. Virtio-user0 send packets:: -12. Rerun step 6. + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop -Test Case 12: packed virtqueue vm2vm vectorized path multi-queues payload check with ring size is not power of 2 and cbdma enable ---------------------------------------------------------------------------------------------------------------------------------- -This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring vectorized path -with ring size is not power of 2 and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. Both iova as VA and PA mode test. +10. Rerun step 5. -1. Bind 8 CBDMA channel to vfio-pci, as common step 1. +Test Case 11: VM2VM packed ring vectorized path multi-queues payload check test with ring size is not power of 2 with cbdma enable +---------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring vectorized path with ring size is not power of 2 +and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1;rxq0;rxq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio1 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4097 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4097 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4097 --rxd=4097 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send 8k length packets:: +4. Launch virtio-user0 and send 8k length packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4097 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=4097 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4097 --rxd=4097 testpmd>set burst 32 @@ -954,79 +839,74 @@ with ring size is not power of 2 and multi-queues when vhost uses the asynchrono testpmd>start tx_first 27 testpmd>stop -6. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. - -7. Quit vhost testpmd:: +5. Start vhost testpmd, then quit pdump, check 448 packets and 28672 bytes received by virtio-user1 and 448 packets with 64 length in pdump-virtio-rx.pcap. - testpmd>quit - -8. Clear virtio-user1 port stats, execute below command:: +6. Clear virtio-user1 port stats:: testpmd>stop testpmd>clear port stats all testpmd>start -9. Relaunch vhost with iova=pa by below command:: +7. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore12@0000:00:04.3,lcore12@0000:00:04.4,lcore12@0000:00:04.5,lcore12@0000:00:04.6,lcore12@0000:00:04.7] -10. Rerun step 4. +8. Attach pdump secondary process to primary process by same file-prefix:: -11. Virtio-user0 send packets:: + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' - testpmd>set burst 32 - testpmd>set txpkts 64 - testpmd>start tx_first 7 - testpmd>stop - testpmd>set burst 1 - testpmd>set txpkts 64,256,2000,64,256,2000 - testpmd>start tx_first 27 - testpmd>stop +9. Virtio-user0 send packets:: -12. Rerun step 6. + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop -Test Case 13: packed virtqueue vm2vm vectorized-tx path multi-queues test indirect descriptor with cbdma enable ---------------------------------------------------------------------------------------------------------------- -This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user -packed ring vectorized-tx path and multi-queues when vhost uses the asynchronous enqueue operations with CBDMA channels. -Both iova as VA and PA mode test. +10. Rerun step 5. -1. Bind 8 CBDMA channel to vfio-pci, as common step 1. +Test Case 12: VM2VM packed ring vectorized-tx path multi-queues test indirect descriptor and payload check with cbdma enable +---------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user +packed ring vectorized-tx path and multi-queues when vhost uses the asynchronous operations with CBDMA channels. Both iova as VA and PA mode test. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq1]' \ --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send 8k length packets:: +4. Launch virtio-user0 and send 8k length packets:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 testpmd>set burst 1 + testpmd>set txpkts 64 testpmd>start tx_first 27 testpmd>stop testpmd>set burst 32 @@ -1036,56 +916,53 @@ Both iova as VA and PA mode test. testpmd>start tx_first 1 testpmd>stop -6. Start vhost, then quit pdump and three testpmd, about packed virtqueue vectorized-tx path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. +5. Start vhost, then quit pdump and three testpmd, about packed virtqueue vectorized-tx path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap. -7. Relaunch vhost with iova=pa by below command:: +6. Quit and relaunch vhost with iova=pa by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=2,client=1,dmas=[rxq0;rxq1]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -8. Rerun step 3-6. - -Test Case 14: packed virtqueue vm2vm vectorized-tx path test batch processing with cbdma enable ------------------------------------------------------------------------------------------------ -This case uses testpmd to test that one packet can forwarding in vhost-user/virtio-user packed ring vectorized-tx path -when vhost uses the asynchronous enqueue operations with CBDMA channels. +7. Rerun step 2-5. -1. Bind 8 CBDMA channel to vfio-pci, as common step 1. +Test Case 13: VM2VM packed ring vectorized-tx path test batch processing with cbdma enable +------------------------------------------------------------------------------------------ +This case uses testpmd to test that one packet can forwarding in vhost-user/virtio-user packed ring vectorized-tx path +when vhost uses the asynchronous operations with CBDMA channels. -2. Launch vhost by below command:: +1. Launch vhost by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ - -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ - --vdev 'eth_vhost0,iface=vhost-net,queues=1,client=1,dmas=[txq0],dma_ring_size=2048' \ - --vdev 'eth_vhost1,iface=vhost-net1,queues=1,client=1,dmas=[txq0],dma_ring_size=2048' \ - --iova=va -- -i --nb-cores=1 --rxq=1 --txq=1 --txd=256 --rxd=256 --no-flush-rx \ + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \ + --vdev 'eth_vhost0,iface=/root/dpdk/vhost-net0,queues=1,client=1,dmas=[txq0;rxq0]' \ + --vdev 'eth_vhost1,iface=/root/dpdk/vhost-net1,queues=1,client=1,dmas=[txq0;rxq0]' \ + --iova=va -- -i --nb-cores=1 --txd=256 --rxd=256 --no-flush-rx \ --lcore-dma=[lcore11@0000:00:04.0,lcore11@0000:00:04.1,lcore11@0000:00:04.2,lcore11@0000:00:04.3,lcore11@0000:00:04.4,lcore11@0000:00:04.5,lcore11@0000:00:04.6,lcore11@0000:00:04.7] -3. Launch virtio-user1 by below command:: +2. Launch virtio-user1 by below command:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ - --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ - -- -i --nb-cores=1 --rxq=1 --txq=1 --txd=256 --rxd=256 + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net1,queues=1,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + -- -i --nb-cores=1 --txd=256 --rxd=256 testpmd>set fwd rxonly testpmd>start -4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: +3. Attach pdump secondary process to primary process by same file-prefix:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 \ - -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' -5. Launch virtio-user0 and send 1 packet:: +4. Launch virtio-user0 and send 1 packet:: - # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ - -- -i --nb-cores=1 --rxq=1 --txq=1 --txd=256 --rxd=256 + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/root/dpdk/vhost-net0,queues=1,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + -- -i --nb-cores=1 --txd=256 --rxd=256 testpmd>set burst 1 testpmd>start tx_first 1 testpmd>stop -6. Start vhost, then quit pdump and three testpmd, check 1 packet and 64 bytes received by virtio-user1 and 1 packet with 64 length in pdump-virtio-rx.pcap. +5. Start vhost, then quit pdump and three testpmd, check 1 packet and 64 bytes received by virtio-user1 and 1 packet with 64 length in pdump-virtio-rx.pcap. -- 2.25.1