1. move the case not covered by ice_flow_priority from rteflow_priority to ice_flow_priority. 2. remove the test suite rteflow_priority. Signed-off-by: Jiale Song --- test_plans/ice_flow_priority_test_plan.rst | 209 ++++++++++++++ test_plans/index.rst | 1 - test_plans/rteflow_priority_test_plan.rst | 309 --------------------- 3 files changed, 209 insertions(+), 310 deletions(-) delete mode 100644 test_plans/rteflow_priority_test_plan.rst diff --git a/test_plans/ice_flow_priority_test_plan.rst b/test_plans/ice_flow_priority_test_plan.rst index 14b7a6f8..73095014 100644 --- a/test_plans/ice_flow_priority_test_plan.rst +++ b/test_plans/ice_flow_priority_test_plan.rst @@ -727,3 +727,212 @@ Subcase 3: some rules overlap 8. destroy rule 4, repeat step 7 and check the pkts can be received by queue 4:: flow destroy 0 rule 3 + +Test case 23: Create Flow Rules Only Supported by Fdir Filter with Priority 0 +----------------------------------------------------------------------------- + +Creating a rule only supported by fdir filter with priority 0, it is not acceptable. + +Patterns in this case: + MAC_IPV6_SCTP + MAC_IPV4_SCTP + +#. Start the ``testpmd`` application as follows:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 + set fwd rxonly + set verbose 1 + +#. Create rules, check the flows can not be created:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 dst is 1111:2222:3333:4444:5555:6666:7777:9999 / sctp src is 25 dst is 23 / end actions queue index 1 / end + ice_flow_create(): Failed to create flow + Caught error type 2 (flow rule (handle)): Invalid input pattern: Invalid argument + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 ttl is 20 / sctp src is 25 dst is 23 / end actions queue index 1 / end + ice_flow_create(): Failed to create flow + Caught error type 2 (flow rule (handle)): Invalid input pattern: Invalid argument + + +Test case 24: Create flow rules only supported by switch filter with priority 1 +------------------------------------------------------------------------------- + +Create a rule only supported by fdir switch with priority 1, it is not acceptable. + +Patterns in this case: + MAC_IPV4_NVGRE_MAC_IPV4 + MAC_IPV4_NVGRE_MAC_IPV4_UDP + +#. Start the ``testpmd`` application as follows:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 + set fwd rxonly + set verbose 1 + +#. Create rules, check the flows can not be created:: + + testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 / nvgre / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 3 / end + ice_flow_create(): Failed to create flow + Caught error type 13 (specific pattern item): cause: 0x7fffe65b8128, Unsupported pattern: Invalid argument + + testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 / nvgre / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / udp src is 25 dst is 23 / end actions queue index 3 / end + ice_flow_create(): Failed to create flow + Caught error type 13 (specific pattern item): cause: 0x7fffe65b8128, Unsupported pattern: Invalid argument + +Test case 25: Create Flow Rules with Priority in Pipeline Mode +-------------------------------------------------------------- + +Priority is active in pipeline mode. +Creating flow rules and setting priority 0/1 will map switch/fdir filter separately. + +Patterns in this case: + MAC_IPV4_TCP + MAC_IPV4_VXLAN_IPV4_UDP_PAY + +#. Start the ``testpmd`` application as follows:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 + set fwd rxonly + set verbose 1 + rx_vxlan_port add 4789 0 + +#. Create switch filter rules:: + + flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 1 / end + + flow create 0 priority 0 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / udp src is 25 dst is 23 / end actions queue index 2 / end + +#. Create fdir filter rules:: + + flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.7 tos is 4 ttl is 20 / tcp src is 25 dst is 23 / end actions queue index 3 / end + + flow create 0 priority 1 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 src is 192.168.0.4 dst is 192.168.0.7 / udp src is 25 dst is 23 / end actions queue index 4 / end + +#. Check flow list with commands "flow list 0", all flows are created correctly:: + + +-----+--------+--------+--------+-----------------------+ + |ID | Group | Prio | Attr | Rul | + +=====+========+========+========+=======================+ + | 0 | 0 | 0 | i- | ETH IPV4 TCP => QUEUE | + +-----+--------+--------+--------+-----------------------+ + | 1 ... | + +-----+--------+--------+--------+-----------------------+ + | 2 ... | + +-----+--------+--------+--------+-----------------------+ + | 3 ... | + +-----+--------+--------+--------+-----------------------+ + +#. Send packets according to the created rules in tester:: + + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP()/UDP()/VXLAN()/Ether()/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/UDP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.4",dst="192.168.0.7",tos=4,ttl=20)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP()/UDP()/VXLAN()/Ether()/IP(src="192.168.0.4 ",dst="192.168.0.7")/UDP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + +#. Check the packets are recieved in right queues by dut:: + + testpmd> port 0/queue 1: received 1 packets + src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0x96803f93 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x1 + ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN + ...... + +#. Create rules without priority, Check only patterns supported by switch can be created for the default priorty is 0. +So the first flow can be created and the second flow can not be created:: + + testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.1 tos is 5 / tcp src is 25 dst is 23 / end actions queue index 1 / end + ice_flow_create(): Succeeded to create (2) flow + Flow rule #1 created + testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 ttl is 20 / sctp src is 25 dst is 23 / end actions queue index 1 / end + ice_flow_create(): Failed to create flow + Caught error type 2 (flow rule (handle)): Invalid input pattern: Invalid argument + +Test case 26: Create flow rules with same parameter but different actions +------------------------------------------------------------------------- + +It is acceptable to create same rules with differenet filter in pipeline mode. +When fdir filter and switch filter has the same parameter rules, the flow will map to switch then fdir. + +Patterns in this case: + MAC_IPV4_TCP + +#. Start the ``testpmd`` application as follows:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 + set fwd rxonly + set verbose 1 + +#. Create switch rule then fdir rule with the same parameter, check two flows can be created:: + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 1 / end + ice_flow_create(): Succeeded to create (2) flow + Flow rule #0 created + + testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 3 / end + ice_interrupt_handler(): OICR: MDD event + ice_flow_create(): Succeeded to create (1) flow + Flow rule #1 created + +#. Tester send a pkt to dut:: + + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + +#. Check the packets are recieved by dut in queue 1:: + + testpmd> port 0/queue 1: received 1 packets + src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x1 + ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN + +#. Remove the switch rule:: + + testpmd>flow destroy 0 rule 0 + +#. Tester send a pkt to dut:: + + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + +#. Check the packets are recieved in queue 3:: + + testpmd> port 0/queue 3: received 1 packets + src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x3 + ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN + +#. Restart the ``testpmd`` application as follows:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0, pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 + set fwd rxonly + set verbose 1 + +#. Create fdir rule then switch rule with the same parameter, check two flows can be created:: + + testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 3 / end + ice_interrupt_handler(): OICR: MDD event + ice_flow_create(): Succeeded to create (1) flow + Flow rule #0 created + + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 1 / end + ice_flow_create(): Succeeded to create (2) flow + Flow rule #1 created + +#. Tester send a pkt to dut:: + + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + +#. Check the packets are recieved by dut in queue 1:: + + testpmd> port 0/queue 1: received 1 packets + src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x1 + ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN + +#. Remove the switch rule:: + + testpmd>flow destroy 0 rule 1 + +#. Tester send a pkt to dut:: + + sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") + +#. Check the packets are recieved in queue 3:: + + testpmd> port 0/queue 3: received 1 packets + src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x3 + ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN \ No newline at end of file diff --git a/test_plans/index.rst b/test_plans/index.rst index a78dd0f5..30c52335 100644 --- a/test_plans/index.rst +++ b/test_plans/index.rst @@ -130,7 +130,6 @@ The following are the test plans for the DPDK DTS automated test system. rss_to_rte_flow_test_plan rss_key_update_test_plan rxtx_offload_test_plan - rteflow_priority_test_plan rte_flow_test_plan runtime_vf_queue_number_kernel_test_plan runtime_vf_queue_number_maxinum_test_plan diff --git a/test_plans/rteflow_priority_test_plan.rst b/test_plans/rteflow_priority_test_plan.rst deleted file mode 100644 index 111383ba..00000000 --- a/test_plans/rteflow_priority_test_plan.rst +++ /dev/null @@ -1,309 +0,0 @@ -.. SPDX-License-Identifier: BSD-3-Clause - Copyright(c) 2019 Intel Corporation - -======================= -Rte_flow Priority Tests -======================= - - -Description -=========== - -This document provides the plan for testing the Rte_flow Priority feature. -this feature uses devargs as a hint to active flow priority or not. - -This test plan is based on Intel E810 series ethernet cards. -when priority is not active, flows are created on fdir then switch/ACL. -when priority is active, flows are identified into 2 category: -High priority as permission stage that maps to switch/ACL, -Low priority as distribution stage that maps to fdir, -a no destination high priority rule is not acceptable, since it may be overwritten -by a low priority rule due to IntelĀ® Ethernet 800 Series FXP behavior. - -Note: Since these tests are focus on priority, the patterns in tests are examples. - - -Prerequisites -============= - -Bind the pf to dpdk driver:: - - ./usertools/dpdk-devbind.py -b vfio-pci af:00.0 - -Note: The kernel must be >= 3.6+ and VT-d must be enabled in bios. - -Test Case: Setting Priority in Non-pipeline Mode -================================================ - -Priority is not active in non-pipeline mode. The default value of priority is 0 but it will be ignored. - -Patterns in this case: - MAC_IPV4 - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create a rule with priority 0, Check the flow can be created but it will map to fdir filter:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 / mark / end - ice_interrupt_handler(): OICR: MDD event - ice_flow_create(): Succeeded to create (1) flow - Flow rule #0 created - -#. Create a rule with priority 1, check the flow can not be created for the vallue of priority is 0 in non-pipeline mode:: - - testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 / mark / end - ice_flow_create(): Failed to create flow - Caught error type 4 (priority field): cause: 0x7ffe24e65738, Not support priority.: Invalid argument - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=0 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create a rule with priority 0, Check the flow can be created but it will map to fdir filter:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 / end - ice_interrupt_handler(): OICR: MDD event - ice_flow_create(): Succeeded to create (1) flow - Flow rule #0 created - -#. Create a rule with priority 1, check the flow can not be created for the vallue of priority is 0 in non-pipeline mode:: - - testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 / end - ice_flow_create(): Failed to create flow - Caught error type 4 (priority field): cause: 0x7ffe24e65738, Not support priority.: Invalid argument - -Test Case: Create Flow Rules with Priority in Pipeline Mode -============================================================ - -Priority is active in pipeline mode. -Creating flow rules and setting priority 0/1 will map switch/fdir filter separately. - -Patterns in this case: - MAC_IPV4_TCP - MAC_IPV4_VXLAN_IPV4_UDP_PAY - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - rx_vxlan_port add 4789 0 - -#. Create switch filter rules:: - - flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 1 / end - - flow create 0 priority 0 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / udp src is 25 dst is 23 / end actions queue index 2 / end - -#. Create fdir filter rules:: - - flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.7 tos is 4 ttl is 20 / tcp src is 25 dst is 23 / end actions queue index 3 / end - - flow create 0 priority 1 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 src is 192.168.0.4 dst is 192.168.0.7 / udp src is 25 dst is 23 / end actions queue index 4 / end - -#. Check flow list with commands "flow list 0", all flows are created correctly:: - - +-----+--------+--------+--------+-----------------------+ - |ID | Group | Prio | Attr | Rul | - +=====+========+========+========+=======================+ - | 0 | 0 | 0 | i- | ETH IPV4 TCP => QUEUE | - +-----+--------+--------+--------+-----------------------+ - | 1 ... | - +-----+--------+--------+--------+-----------------------+ - | 2 ... | - +-----+--------+--------+--------+-----------------------+ - | 3 ... | - +-----+--------+--------+--------+-----------------------+ - -#. Send packets according to the created rules in tester:: - - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP()/UDP()/VXLAN()/Ether()/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/UDP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.4",dst="192.168.0.7",tos=4,ttl=20)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP()/UDP()/VXLAN()/Ether()/IP(src="192.168.0.4 ",dst="192.168.0.7")/UDP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - -#. Check the packets are recieved in right queues by dut:: - - testpmd> port 0/queue 1: received 1 packets - src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0x96803f93 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x1 - ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN - ...... - -#. Create rules without priority, Check only patterns supported by switch can be created for the default priorty is 0. -So the first flow can be created and the second flow can not be created:: - - testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.1 tos is 5 / tcp src is 25 dst is 23 / end actions queue index 1 / end - ice_flow_create(): Succeeded to create (2) flow - Flow rule #1 created - testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 ttl is 20 / sctp src is 25 dst is 23 / end actions queue index 1 / end - ice_flow_create(): Failed to create flow - Caught error type 2 (flow rule (handle)): Invalid input pattern: Invalid argument - -Test case: Create No Destination High Priority Flow Rule -======================================================== - -A no destination high priority rule is not acceptable. Destination here means exact actions. - -Patterns in this case: - MAC_IPV4_TCP - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create a rule without exact actions, check the flows can not be created:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions / end - Bad arguments - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end - Bad arguments - -Test case: Create Flow Rules Only Supported by Fdir Filter with Priority 0 -=========================================================================== - -Creating a rule only supported by fdir filter with priority 0, it is not acceptable. - -Patterns in this case: - MAC_IPV6_SCTP - MAC_IPV4_SCTP - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create rules, check the flows can not be created:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 dst is 1111:2222:3333:4444:5555:6666:7777:9999 / sctp src is 25 dst is 23 / end actions queue index 1 / end - ice_flow_create(): Failed to create flow - Caught error type 2 (flow rule (handle)): Invalid input pattern: Invalid argument - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 ttl is 20 / sctp src is 25 dst is 23 / end actions queue index 1 / end - ice_flow_create(): Failed to create flow - Caught error type 2 (flow rule (handle)): Invalid input pattern: Invalid argument - - -Test case: Create flow rules only supported by switch filter with priority 1 -============================================================================= - -Create a rule only supported by fdir switch with priority 1, it is not acceptable. - -Patterns in this case: - MAC_IPV4_NVGRE_MAC_IPV4 - MAC_IPV4_NVGRE_MAC_IPV4_UDP - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create rules, check the flows can not be created:: - - testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 / nvgre / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 3 / end - ice_flow_create(): Failed to create flow - Caught error type 13 (specific pattern item): cause: 0x7fffe65b8128, Unsupported pattern: Invalid argument - - testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 / nvgre / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / udp src is 25 dst is 23 / end actions queue index 3 / end - ice_flow_create(): Failed to create flow - Caught error type 13 (specific pattern item): cause: 0x7fffe65b8128, Unsupported pattern: Invalid argument - -Test case: Create flow rules with same parameter but differenet actions -========================================================================== - -It is acceptable to create same rules with differenet filter in pipeline mode. -When fdir filter and switch filter has the same parameter rules, the flow will map to switch then fdir. - -Patterns in this case: - MAC_IPV4_TCP - -#. Start the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create switch rule then fdir rule with the same parameter, check two flows can be created:: - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 1 / end - ice_flow_create(): Succeeded to create (2) flow - Flow rule #0 created - - testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 3 / end - ice_interrupt_handler(): OICR: MDD event - ice_flow_create(): Succeeded to create (1) flow - Flow rule #1 created - -#. Tester send a pkt to dut:: - - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - -#. Check the packets are recieved by dut in queue 1:: - - testpmd> port 0/queue 1: received 1 packets - src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x1 - ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN - -#. Remove the switch rule:: - - testpmd>flow destroy 0 rule 0 - -#. Tester send a pkt to dut:: - - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - -#. Check the packets are recieved in queue 3:: - - testpmd> port 0/queue 3: received 1 packets - src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x3 - ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN - -#. Restart the ``testpmd`` application as follows:: - - ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0, pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8 - set fwd rxonly - set verbose 1 - -#. Create fdir rule then switch rule with the same parameter, check two flows can be created:: - - testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 3 / end - ice_interrupt_handler(): OICR: MDD event - ice_flow_create(): Succeeded to create (1) flow - Flow rule #0 created - - testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end actions queue index 1 / end - ice_flow_create(): Succeeded to create (2) flow - Flow rule #1 created - -#. Tester send a pkt to dut:: - - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - -#. Check the packets are recieved by dut in queue 1:: - - testpmd> port 0/queue 1: received 1 packets - src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x1 - ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN - -#. Remove the switch rule:: - - testpmd>flow destroy 0 rule 1 - -#. Tester send a pkt to dut:: - - sendp([Ether(dst="00:00:00:00:11:00",src="11:22:33:44:55:66")/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Raw('x'*80)],iface="enp134s0f0") - -#. Check the packets are recieved in queue 3:: - - testpmd> port 0/queue 3: received 1 packets - src=11:22:33:44:55:66 - dst=00:00:00:00:11:00 - type=0x0800 - length=134 - nb_segs=1 - RSS hash=0xf12811f1 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_TCP - l2_len=14 - l3_len=20 - l4_len=20 - Receive queue=0x3 - ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN -- 2.17.1