* [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3
@ 2022-11-10 5:33 Weiyuan Li
2022-11-10 5:33 ` [dts][PATCH V2 2/8] tests/vlan_ethertype_config: " Weiyuan Li
` (6 more replies)
0 siblings, 7 replies; 9+ messages in thread
From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: Weiyuan Li
Modify script and test plan to i40e support fimware > 8.3.
When the fimrware > 8.3, if the filter is to take effect need to enable
extend.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
v2:
-use the firmware version to judge whether to add command `extend on`.
test_plans/vlan_ethertype_config_test_plan.rst | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/test_plans/vlan_ethertype_config_test_plan.rst b/test_plans/vlan_ethertype_config_test_plan.rst
index 80a6ee28..de4bccac 100644
--- a/test_plans/vlan_ethertype_config_test_plan.rst
+++ b/test_plans/vlan_ethertype_config_test_plan.rst
@@ -52,6 +52,9 @@ Test Case 2: test VLAN filtering on/off
testpmd> vlan set filter on 0
testpmd> start
+ if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally:
+ testpmd> vlan set extend on 0
+
2. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
Verify that the VLAN packet cannot be received in port ``B``.
@@ -77,6 +80,9 @@ Test Case 3: test adding VLAN Tag Identifier with changing VLAN TPID
testpmd> vlan set strip off 0
testpmd> start
+ if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally:
+ testpmd> vlan set extend on 0
+
2. Add a VLAN Tag Identifier ``16`` on port ``0``::
testpmd> rx_vlan add 16 0
--
2.27.0
^ permalink raw reply [flat|nested] 9+ messages in thread* [dts][PATCH V2 2/8] tests/vlan_ethertype_config: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 3/8] test_plans/vlan: " Weiyuan Li ` (5 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. tests/TestSuite_vlan_ethertype_config.py | 25 +++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py index b641d928..95062f91 100644 --- a/tests/TestSuite_vlan_ethertype_config.py +++ b/tests/TestSuite_vlan_ethertype_config.py @@ -56,6 +56,17 @@ class TestVlanEthertypeConfig(TestCase): """ self.pmdout = PmdOutput(self.dut) self.pmdout.start_testpmd("Default", "--portmask=%s" % self.portmask) + # Get the firmware version information + try: + self.fwversion, _, _ = self.pmdout.get_firmware_version( + self.dut.get_ports()[0] + ).split() + except ValueError: + # nic IXGBE, IGC + self.fwversion = self.pmdout.get_firmware_version( + self.dut.get_ports()[0] + ).split() + if self.kdriver == "i40e": self.dut.send_expect("set promisc all off", "testpmd> ") @@ -194,6 +205,12 @@ class TestVlanEthertypeConfig(TestCase): self.dut.send_expect( "vlan set filter on %s" % dutRxPortId, "testpmd> " ) + # Because the kernel forces enable Qinq and cannot be closed, + # the dpdk can only add 'extend on' to make the single VLAN filter work normally. + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect( + "vlan set extend on %s" % dutRxPortId, "testpmd> " + ) self.dut.send_expect("start", "testpmd> ") self.check_vlan_packets(rx_vlan, tpid, self.rxItf, False) # test vlan filter off @@ -209,8 +226,12 @@ class TestVlanEthertypeConfig(TestCase): random_vlan = random.randint(1, MAX_VLAN - 1) rx_vlans = [1, random_vlan, MAX_VLAN] self.dut.send_expect("set fwd mac", "testpmd> ") - self.dut.send_expect("vlan set filter on %s" % dutRxPortId, "testpmd> ") + self.dut.send_expect("vlan set filter on %s" % dutRxPortId, "testpmd> ") self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ", 20) + # Because the kernel forces enable Qinq and cannot be closed, + # the dpdk can only add 'extend on' to make the single VLAN filter work normally. + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect("vlan set extend on %s" % dutRxPortId, "testpmd> ") self.dut.send_expect("start", "testpmd> ") # caium_a063 card support only default '0x8100' tpid in rx mode @@ -359,6 +380,8 @@ class TestVlanEthertypeConfig(TestCase): """ Run after each test case. """ + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect("vlan set extend off %s" % dutRxPortId, "testpmd> ") self.dut.send_expect("stop", "testpmd> ", 30) self.dut.send_expect("quit", "# ", 30) pass -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts][PATCH V2 3/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 2/8] tests/vlan_ethertype_config: " Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 4/8] tests/vlan: " Weiyuan Li ` (4 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. test_plans/vlan_test_plan.rst | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/test_plans/vlan_test_plan.rst b/test_plans/vlan_test_plan.rst index 6e2bf74e..442e4efe 100644 --- a/test_plans/vlan_test_plan.rst +++ b/test_plans/vlan_test_plan.rst @@ -61,6 +61,10 @@ Enable the receipt of VLAN packets with VLAN Tag Identifier 1 on port 0:: testpmd> rx_vlan add 1 0 testpmd> vlan set strip off 0 + + if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally: + testpmd> vlan set extend on 0 + testpmd> start rxonly packet forwarding - CRC stripping disabled - packets/burst=32 nb forwarding cores=1 - nb forwarding ports=10 @@ -111,7 +115,10 @@ Test Case: Disable receipt of VLAN packets Disable the receipt of VLAN packets with Tag Identifier ``1`` on port 0. Send VLAN packets with the Tag Identifier ``1`` check that no packet is received on port ``B``, meaning that VLAN packets are now dropped on port 0:: - + + if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally: + testpmd> vlan set extend on 0 + testpmd> rx_vlan rm 1 0 testpmd> start rxonly packet forwarding - CRC stripping disabled - packets/burst=32 -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts][PATCH V2 4/8] tests/vlan: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 2/8] tests/vlan_ethertype_config: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 3/8] test_plans/vlan: " Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 5/8] test_plans/ipgre: " Weiyuan Li ` (3 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. tests/TestSuite_vlan.py | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/tests/TestSuite_vlan.py b/tests/TestSuite_vlan.py index 3d8811f9..c2240c30 100644 --- a/tests/TestSuite_vlan.py +++ b/tests/TestSuite_vlan.py @@ -48,7 +48,14 @@ class TestVlan(TestCase): self.pmdout.start_testpmd( "Default", "--portmask=%s --port-topology=loop" % portMask ) - + # Get the firmware version information + try: + self.fwversion, _, _ = self.pmdout.get_firmware_version( + self.dut_ports[0] + ).split() + except ValueError: + # nic IXGBE, IGC + self.fwversion = self.pmdout.get_firmware_version(self.dut_ports[0]).split() self.dut.send_expect("set verbose 1", "testpmd> ") self.dut.send_expect("set fwd mac", "testpmd> ") self.dut.send_expect("set promisc all off", "testpmd> ") @@ -105,6 +112,10 @@ class TestVlan(TestCase): self.dut.send_expect( "rx_vlan add %d %s" % (self.vlan, dutRxPortId), "testpmd> " ) + # Because the kernel forces enable Qinq and cannot be closed, + # the dpdk can only add 'extend on' to make the single VLAN filter work normally. + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect("vlan set extend on %s" % dutRxPortId, "testpmd> ") self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ") self.dut.send_expect("start", "testpmd> ", 120) out = self.dut.send_expect("show port info %s" % dutRxPortId, "testpmd> ", 20) @@ -127,6 +138,10 @@ class TestVlan(TestCase): Disable receipt of VLAN packets """ self.dut.send_expect("rx_vlan rm %d %s" % (self.vlan, dutRxPortId), "testpmd> ") + # Because the kernel forces enable Qinq and cannot be closed, + # the dpdk can only add 'extend on' to make the single VLAN filter work normally. + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect("vlan set extend on %s" % dutRxPortId, "testpmd> ") self.dut.send_expect("start", "testpmd> ", 120) self.vlan_send_packet(self.vlan) @@ -187,7 +202,8 @@ class TestVlan(TestCase): """ Run after each test case. """ - pass + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect("vlan set extend off %s" % dutRxPortId, "testpmd> ") def tear_down_all(self): """ -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts][PATCH V2 5/8] test_plans/ipgre: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li ` (2 preceding siblings ...) 2022-11-10 5:33 ` [dts][PATCH V2 4/8] tests/vlan: " Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 6/8] tests/ipgre: " Weiyuan Li ` (2 subsequent siblings) 6 siblings, 0 replies; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. test_plans/ipgre_test_plan.rst | 3 +++ 1 file changed, 3 insertions(+) diff --git a/test_plans/ipgre_test_plan.rst b/test_plans/ipgre_test_plan.rst index 693432ef..f44628f7 100644 --- a/test_plans/ipgre_test_plan.rst +++ b/test_plans/ipgre_test_plan.rst @@ -58,6 +58,9 @@ Start testpmd and enable rxonly forwarding mode:: testpmd> set verbose 1 testpmd> start + if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally: + testpmd> vlan set extend on 0 + Send packet as table listed and packet type match each layer:: Ether()/IPv6(nh=47)/GRE()/IP()/UDP()/Raw('x'*40) -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts][PATCH V2 6/8] tests/ipgre: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li ` (3 preceding siblings ...) 2022-11-10 5:33 ` [dts][PATCH V2 5/8] test_plans/ipgre: " Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 7/8] test_plans/dual_vlan: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 8/8] tests/dual_vlan: " Weiyuan Li 6 siblings, 0 replies; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. tests/TestSuite_ipgre.py | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/tests/TestSuite_ipgre.py b/tests/TestSuite_ipgre.py index cd50c1c4..c9371678 100644 --- a/tests/TestSuite_ipgre.py +++ b/tests/TestSuite_ipgre.py @@ -309,9 +309,22 @@ class TestIpgre(TestCase): socket=self.ports_socket, ) + # Get the firmware version information + try: + fwversion, _, _ = self.pmdout.get_firmware_version( + self.dut_ports[0] + ).split() + except ValueError: + # nic IXGBE, IGC + fwversion = self.pmdout.get_firmware_version(self.dut_ports[0]).split() + self.dut.send_expect("set fwd rxonly", "testpmd>") self.dut.send_expect("set verbose 1", "testpmd>") self.dut.send_expect("start", "testpmd>") + # Because the kernel forces enable Qinq and cannot be closed, + # the dpdk can only add 'extend on' to make the single VLAN filter work normally. + if self.kdriver == "i40e" and fwversion >= "8.40": + self.dut.send_expect("vlan set extend off 0", "testpmd>") # inner ipv4 config_layers = { -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts][PATCH V2 7/8] test_plans/dual_vlan: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li ` (4 preceding siblings ...) 2022-11-10 5:33 ` [dts][PATCH V2 6/8] tests/ipgre: " Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 8/8] tests/dual_vlan: " Weiyuan Li 6 siblings, 0 replies; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. test_plans/dual_vlan_test_plan.rst | 73 ++++++++++++++++++++++++++++-- 1 file changed, 70 insertions(+), 3 deletions(-) diff --git a/test_plans/dual_vlan_test_plan.rst b/test_plans/dual_vlan_test_plan.rst index fab18515..a5bbeb8b 100644 --- a/test_plans/dual_vlan_test_plan.rst +++ b/test_plans/dual_vlan_test_plan.rst @@ -35,6 +35,10 @@ The -n command is used to select the number of memory channels. It should match Test Case: Enable/Disable VLAN packets filtering ================================================ +if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally:: + + testpmd> vlan set extend on 0 + Setup the ``mac`` forwarding mode:: testpmd> set fwd mac @@ -61,9 +65,7 @@ Check whether the mode is set successful:: Allmulticast mode: disabled Maximum number of MAC addresses: 127 VLAN offload: - strip off - filter on - qinq(extend) off + strip off, filter on, extend on, qinq strip off start forwarding packets:: @@ -112,6 +114,10 @@ Disable VLAN packet extend and strip port ``0``:: testpmd> vlan set extend off 0 testpmd> vlan set strip off 0 +if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally:: + + testpmd> vlan set extend on 0 + Enable VLAN filtering on port ``0``:: testpmd> vlan set filter on 0 @@ -358,6 +364,67 @@ except insert are set on rx port). | 0x1 | 0x2 | yes | yes,0x2 | yes | yes | pass | 0x3 | 0x1 | +-------+-------+--------+------------+--------+--------+-------+-------+-------+ +Do the synthetic test according to the following table, if the i40e firmware >= 8.4. + ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| Outer | Inner | Vlan | Vlan | Vlan | Vlan | Pass/ | Outer | Inner | +| vlan | vlan | strip | filter | extend | insert | Drop | vlan | vlan | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | no | no | no | pass | 0x1 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | no | no | no | pass | no | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x1 | no | no | pass | 0x1 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x2 | no | no | pass | 0x1 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x1 | no | no | pass | no | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x2 | no | no | pass | no | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | no | yes | no | pass | 0x1 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | no | yes | no | pass | no | 0x1 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x1 | yes | no | pass | 0x1 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x2 | yes | no | drop | no | no | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x1 | yes | no | pass | no | 0x1 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x2 | yes | no | drop | no | no | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | no | no | yes | pass | 0x3 | 0x1 | +| | | | | | | | | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | no | no | yes | pass | 0x3 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x1 | no | yes | pass | 0x3 | 0x1 | +| | | | | | | | | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x2 | no | yes | pass | 0x3 | 0x1 | +| | | | | | | | | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x1 | no | yes | pass | 0x3 | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x2 | no | yes | drop | no | no | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | no | yes | yes | pass | 0x3 | 0x1 | +| | | | | | | | | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | no | yes | yes | pass | 0x3 | 0x1 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x1 | yes | yes | pass | 0x3 | 0x1 | +| | | | | | | | | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | no | yes,0x2 | yes | yes | pass | 0x3 | 0x1 | +| | | | | | | | | 0x2 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x1 | yes | yes | pass | 0x3 | 0x1 | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ +| 0x1 | 0x2 | yes | yes,0x2 | yes | yes | drop | no | no | ++-------+-------+--------+------------+--------+--------+-------+-------+-------+ + Test Case: Strip/Filter/Extend/Insert enable/disable random test ================================================================ -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [dts][PATCH V2 8/8] tests/dual_vlan: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li ` (5 preceding siblings ...) 2022-11-10 5:33 ` [dts][PATCH V2 7/8] test_plans/dual_vlan: " Weiyuan Li @ 2022-11-10 5:33 ` Weiyuan Li 2022-11-18 1:59 ` Jiale, SongX 6 siblings, 1 reply; 9+ messages in thread From: Weiyuan Li @ 2022-11-10 5:33 UTC (permalink / raw) To: dts, lijuan.tu; +Cc: Weiyuan Li Modify script and test plan to i40e support fimware > 8.3. When the fimrware > 8.3, if the filter is to take effect need to enable extend. Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> --- v2: -use the firmware version to judge whether to add command `extend on`. tests/TestSuite_dual_vlan.py | 389 ++++++++++++++++++++++------------- 1 file changed, 246 insertions(+), 143 deletions(-) diff --git a/tests/TestSuite_dual_vlan.py b/tests/TestSuite_dual_vlan.py index 87c5325b..e0cfc4b8 100644 --- a/tests/TestSuite_dual_vlan.py +++ b/tests/TestSuite_dual_vlan.py @@ -14,65 +14,6 @@ import re import time import framework.utils as utils - -txvlan = 3 -outvlan = 1 -invlan = 2 - -allResult = { - "TX+OUTER+INNER": (txvlan, outvlan, invlan), - "TX+INNER": (txvlan, invlan), - "TX+OUTER": (txvlan, outvlan), - "OUTER+INNER": (outvlan, invlan), - "INNER": (invlan,), - "OUTER": (outvlan,), - "NONE": ("No",), -} - -stripCase = 0x1 -filterCase = 0x2 -qinqCase = 0x4 -txCase = 0x8 - -vlanCaseDef = [ - 0, - stripCase, - filterCase, - filterCase | stripCase, - qinqCase, - qinqCase | stripCase, - qinqCase | filterCase, - qinqCase | filterCase | stripCase, - txCase, - txCase | stripCase, - txCase | filterCase, - txCase | filterCase | stripCase, - txCase | qinqCase, - txCase | qinqCase | stripCase, - txCase | qinqCase | filterCase, - txCase | qinqCase | filterCase | stripCase, -] - -vlanCase = [ - "OUTER+INNER", - "INNER", - ("OUTER+INNER", "NONE"), - ("INNER", "NONE"), - "OUTER+INNER", - "OUTER", - ("NONE", "OUTER+INNER"), - ("NONE", "OUTER"), - "TX+OUTER+INNER", - "TX+INNER", - ("TX+OUTER+INNER", "NONE"), - ("TX+INNER", "NONE"), - "TX+OUTER+INNER", - "TX+OUTER", - ("NONE", "TX+OUTER+INNER"), - ("NONE", "TX+OUTER"), -] - - from framework.pmd_output import PmdOutput from framework.test_case import TestCase @@ -104,6 +45,15 @@ class TestDualVlan(TestCase): "Default", "--portmask=%s" % portMask, socket=self.ports_socket ) + # Get the firmware version information + try: + self.fwversion, _, _ = self.pmdout.get_firmware_version( + self.dut_ports[0] + ).split() + except ValueError: + # nic IXGBE, IGC + self.fwversion = self.pmdout.get_firmware_version(self.dut_ports[0]).split() + if self.nic in [ "I40E_10G-SFP_XL710", "I40E_40G-QSFP_A", @@ -120,6 +70,127 @@ class TestDualVlan(TestCase): self.verify("Set mac packet forwarding mode" in out, "set fwd mac error") out = self.dut.send_expect("start", "testpmd> ", 120) + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.config_i40e_firmware_vlan() + else: + self.config_original() + + def config_original(self): + self.txvlan = 3 + self.outvlan = 1 + self.invlan = 2 + + self.allResult = { + "TX+OUTER+INNER": (self.txvlan, self.outvlan, self.invlan), + "TX+INNER": (self.txvlan, self.invlan), + "TX+OUTER": (self.txvlan, self.outvlan), + "OUTER+INNER": (self.outvlan, self.invlan), + "INNER": (self.invlan,), + "OUTER": (self.outvlan,), + "NONE": ("No",), + } + + self.stripCase = 0x1 + self.filterCase = 0x2 + self.qinqCase = 0x4 + self.txCase = 0x8 + + self.vlanCaseDef = [ + 0, + self.stripCase, + self.filterCase, + self.filterCase | self.stripCase, + self.qinqCase, + self.qinqCase | self.stripCase, + self.qinqCase | self.filterCase, + self.qinqCase | self.filterCase | self.stripCase, + self.txCase, + self.txCase | self.stripCase, + self.txCase | self.filterCase, + self.txCase | self.filterCase | self.stripCase, + self.txCase | self.qinqCase, + self.txCase | self.qinqCase | self.stripCase, + self.txCase | self.qinqCase | self.filterCase, + self.txCase | self.qinqCase | self.filterCase | self.stripCase, + ] + + self.vlanCase = [ + "OUTER+INNER", + "INNER", + ("OUTER+INNER", "NONE"), + ("INNER", "NONE"), + "OUTER+INNER", + "OUTER", + ("NONE", "OUTER+INNER"), + ("NONE", "OUTER"), + "TX+OUTER+INNER", + "TX+INNER", + ("TX+OUTER+INNER", "NONE"), + ("TX+INNER", "NONE"), + "TX+OUTER+INNER", + "TX+OUTER", + ("NONE", "TX+OUTER+INNER"), + ("NONE", "TX+OUTER"), + ] + + def config_i40e_firmware_vlan(self): + self.txvlan = 3 + self.outvlan = 1 + self.invlan = 2 + + self.allResult = { + "TX+OUTER+INNER": (self.txvlan, self.outvlan, self.invlan), + "TX+INNER": (self.txvlan, self.invlan), + "TX+OUTER": (self.txvlan, self.outvlan), + "OUTER+INNER": (self.outvlan, self.invlan), + "INNER": (self.invlan,), + "OUTER": (self.outvlan,), + "NONE": ("No",), + } + + self.stripCase = 0x1 + self.filterCase = 0x2 + self.qinqCase = 0x4 + self.txCase = 0x8 + + self.vlanCaseDef = [ + 0, + self.stripCase, + self.filterCase | self.qinqCase, + self.filterCase | self.qinqCase | self.stripCase, + self.qinqCase, + self.qinqCase | self.stripCase, + self.qinqCase | self.filterCase, + self.qinqCase | self.filterCase | self.stripCase, + self.txCase, + self.txCase | self.stripCase, + self.txCase | self.filterCase | self.qinqCase, + self.txCase | self.filterCase | self.qinqCase | self.stripCase, + self.txCase | self.qinqCase, + self.txCase | self.qinqCase | self.stripCase, + self.txCase | self.qinqCase | self.filterCase, + self.txCase | self.qinqCase | self.filterCase | self.stripCase, + ] + + self.vlanCase = [ + "OUTER+INNER", + "INNER", + ("OUTER+INNER", "NONE"), + ("OUTER", "NONE"), + "OUTER+INNER", + "OUTER", + ("OUTER+INNER", "NONE"), + ("OUTER", "NONE"), + "TX+OUTER+INNER", + "TX+INNER", + ("TX+OUTER+INNER", "NONE"), + ("TX+OUTER", "NONE"), + "TX+OUTER+INNER", + "TX+OUTER", + ("TX+OUTER+INNER", "NONE"), + ("TX+OUTER", "NONE"), + ] + def start_tcpdump(self, rxItf): self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") @@ -174,14 +245,15 @@ class TestDualVlan(TestCase): # Intel® Ethernet 700 Series NIC vlan filter can't close, if want close need remove rx_vlan if mode == "filter": if modeName[mode] == "off": - self.dut.send_expect( - "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> " - ) + self.dut.send_expect("vlan set filter off all", "testpmd> ") continue else: - self.dut.send_expect( - "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> " - ) + self.dut.send_expect("vlan set filter on all", "testpmd> ") + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect( + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), + "testpmd> ", + ) continue if mode == "stripq": @@ -209,14 +281,15 @@ class TestDualVlan(TestCase): # Intel® Ethernet 700 Series NIC vlan filter can't close, if want close need remove rx_vlan if mode == "filter": if modeName[mode] == "off": - self.dut.send_expect( - "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> " - ) + self.dut.send_expect("vlan set filter off all", "testpmd> ") continue else: - self.dut.send_expect( - "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> " - ) + self.dut.send_expect("vlan set filter on all", "testpmd> ") + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.dut.send_expect( + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), + "testpmd> ", + ) continue if mode == "extend": @@ -235,22 +308,22 @@ class TestDualVlan(TestCase): """ Setup Strip/Filter/Extend/Insert enable/disable for synthetic test. """ - caseDef = vlanCaseDef[caseIndex] + caseDef = self.vlanCaseDef[caseIndex] temp = [] - temp.append("on") if (caseDef & stripCase) != 0 else temp.append("off") - temp.append("on") if (caseDef & filterCase) != 0 else temp.append("off") - temp.append("on") if (caseDef & qinqCase) != 0 else temp.append("off") + temp.append("on") if (caseDef & self.stripCase) != 0 else temp.append("off") + temp.append("on") if (caseDef & self.filterCase) != 0 else temp.append("off") + temp.append("on") if (caseDef & self.qinqCase) != 0 else temp.append("off") if (self.nic in ["cavium_a063", "cavium_a064"]) and temp[2] == "on": ## Skip QinQ for cavium devices as it is not supported. return self.mode_config(strip=temp[0], filter=temp[1], extend=temp[2]) - if (caseDef & txCase) != 0: + if (caseDef & self.txCase) != 0: self.dut.send_expect("stop", "testpmd> ") self.dut.send_expect("port stop all", "testpmd> ") self.dut.send_expect( - "tx_vlan set %s %s" % (dutTxPortId, txvlan), "testpmd> " + "tx_vlan set %s %s" % (dutTxPortId, self.txvlan), "testpmd> " ) self.dut.send_expect("port start all", "testpmd> ") self.dut.send_expect("start", "testpmd> ") @@ -259,27 +332,27 @@ class TestDualVlan(TestCase): temp[0], temp[1], temp[2], - "on" if (caseDef & txCase) != 0 else "off", + "on" if (caseDef & self.txCase) != 0 else "off", ) - if (caseDef & filterCase) != 0: + if (caseDef & self.filterCase) != 0: self.dut.send_expect( - "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) - self.vlan_send_packet(outvlan, invlan) - self.check_result(vlanCase[caseIndex][0], configMode + " result Error") + self.vlan_send_packet(self.outvlan, self.invlan) + self.check_result(self.vlanCase[caseIndex][0], configMode + " result Error") self.dut.send_expect( - "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) self.dut.send_expect( - "rx_vlan add %s %s" % (invlan, dutRxPortId), "testpmd> " + "rx_vlan add %s %s" % (self.invlan, dutRxPortId), "testpmd> " ) - self.vlan_send_packet(outvlan, invlan) - self.check_result(vlanCase[caseIndex][1], configMode + " result Error") + self.vlan_send_packet(self.outvlan, self.invlan) + self.check_result(self.vlanCase[caseIndex][1], configMode + " result Error") self.dut.send_expect( - "rx_vlan rm %s %s" % (invlan, dutRxPortId), "testpmd> " + "rx_vlan rm %s %s" % (self.invlan, dutRxPortId), "testpmd> " ) - if (caseDef & txCase) != 0: + if (caseDef & self.txCase) != 0: self.dut.send_expect("stop", "testpmd> ") self.dut.send_expect("port stop all", "testpmd> ") self.dut.send_expect("tx_vlan reset %s" % dutTxPortId, "testpmd> ") @@ -288,24 +361,24 @@ class TestDualVlan(TestCase): else: self.dut.send_expect( - "rx_vlan add %s %s" % (invlan, dutRxPortId), "testpmd> " + "rx_vlan add %s %s" % (self.invlan, dutRxPortId), "testpmd> " ) self.dut.send_expect( - "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) - self.vlan_send_packet(outvlan, invlan) - self.check_result(vlanCase[caseIndex], configMode + " result Error") - if (caseDef & txCase) != 0: + self.vlan_send_packet(self.outvlan, self.invlan) + self.check_result(self.vlanCase[caseIndex], configMode + " result Error") + if (caseDef & self.txCase) != 0: self.dut.send_expect("stop", "testpmd> ") self.dut.send_expect("port stop all", "testpmd> ") self.dut.send_expect("tx_vlan reset %s" % dutTxPortId, "testpmd> ") self.dut.send_expect("port start all", "testpmd> ") self.dut.send_expect("start", "testpmd> ") self.dut.send_expect( - "rx_vlan rm %s %s" % (invlan, dutRxPortId), "testpmd> " + "rx_vlan rm %s %s" % (self.invlan, dutRxPortId), "testpmd> " ) self.dut.send_expect( - "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) def check_result(self, resultKey, errorString): @@ -314,14 +387,15 @@ class TestDualVlan(TestCase): """ print(("vlan flage config:%s" % errorString)) out = self.get_tcpdump_package() - if allResult[resultKey][0] == "No": + if self.allResult[resultKey][0] == "No": self.verify("vlan" not in out, errorString) else: resultList = [] - for i in range(len(allResult[resultKey]) - 1): - resultList.append("vlan %s" % allResult[resultKey][i]) + for i in range(len(self.allResult[resultKey]) - 1): + resultList.append("vlan %s" % self.allResult[resultKey][i]) resultList.append( - "vlan %s" % allResult[resultKey][len(allResult[resultKey]) - 1] + "vlan %s" + % self.allResult[resultKey][len(self.allResult[resultKey]) - 1] ) for line in resultList: self.verify(line in out, "receive packet is wrong:%s" % out) @@ -338,15 +412,22 @@ class TestDualVlan(TestCase): """ self.mode_config(filter="on") self.mode_config(strip="off") - self.mode_config(extend="off") - self.vlan_send_packet(outvlan) + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.mode_config(extend="on") + self.dut.send_expect( + "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> " + ) + else: + self.mode_config(extend="off") + + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() print(out) self.verify( - out is not None and "vlan %s" % outvlan not in out, + out is not None and "vlan %s" % self.outvlan not in out, "Vlan filter enable error: " + out, ) - + self.logger.debug(self.nic) if self.nic not in [ "ICE_25G-E810C_SFP", "ICE_100G-E810C_QSFP", @@ -359,18 +440,22 @@ class TestDualVlan(TestCase): "I40E_10G-10G_BASE_T_X722", ]: self.mode_config(filter="off") - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() - self.verify("vlan %s" % outvlan in out, "Vlan filter disable error: " + out) + self.verify( + "vlan %s" % self.outvlan in out, "Vlan filter disable error: " + out + ) else: self.dut.send_expect( - "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() - self.verify("vlan %s" % outvlan in out, "Vlan filter disable error: " + out) + self.verify( + "vlan %s" % self.outvlan in out, "Vlan filter disable error: " + out + ) self.dut.send_expect( - "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) def test_vlan_filter_table(self): @@ -380,20 +465,26 @@ class TestDualVlan(TestCase): self.mode_config(filter="on") self.mode_config(strip="off") - self.mode_config(extend="off") - - self.dut.send_expect("rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> ") - self.vlan_send_packet(outvlan) + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.mode_config(extend="on") + else: + self.mode_config(extend="off") + self.dut.send_expect( + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> " + ) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() self.verify( - "vlan %s" % outvlan in out, "vlan filter table enable error: " + out + "vlan %s" % self.outvlan in out, "vlan filter table enable error: " + out ) - self.dut.send_expect("rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> ") - self.vlan_send_packet(outvlan) + self.dut.send_expect( + "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> " + ) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() self.verify( - out is not None and "vlan %s" % outvlan not in out, + out is not None and "vlan %s" % self.outvlan not in out, "vlan filter table disable error: " + out, ) @@ -417,16 +508,18 @@ class TestDualVlan(TestCase): "I40E_10G-10G_BASE_T_X722", ]: self.dut.send_expect( - "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() - self.verify("vlan %s" % outvlan not in out, "Vlan strip enable error: " + out) + self.verify( + "vlan %s" % self.outvlan not in out, "Vlan strip enable error: " + out + ) self.mode_config(strip="off") - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() - self.verify("vlan %s" % outvlan in out, "Vlan strip disable error: " + out) + self.verify("vlan %s" % self.outvlan in out, "Vlan strip disable error: " + out) if self.nic in [ "ICE_25G-E810C_SFP", "ICE_100G-E810C_QSFP", @@ -439,7 +532,7 @@ class TestDualVlan(TestCase): "I40E_10G-10G_BASE_T_X722", ]: self.dut.send_expect( - "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> " + "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> " ) def test_vlan_stripq_config(self): @@ -450,23 +543,25 @@ class TestDualVlan(TestCase): self.mode_config(extend="off") self.mode_config(strip="off") self.mode_config(stripq="off") - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() self.verify( - "vlan %s" % outvlan in out, "vlan strip queue disable error : " + out + "vlan %s" % self.outvlan in out, "vlan strip queue disable error : " + out ) # if self.nic in ["I40E_10G-SFP_XL710", "I40E_40G-QSFP_A", "I40E_40G-QSFP_B"]: self.mode_config(strip="on") self.mode_config(stripq="on") - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() - self.verify("vlan %s" % outvlan not in out, "vlan strip enable error: " + out) + self.verify( + "vlan %s" % self.outvlan not in out, "vlan strip enable error: " + out + ) self.mode_config(stripq="off") - self.vlan_send_packet(outvlan) + self.vlan_send_packet(self.outvlan) out = self.get_tcpdump_package() self.verify( - "vlan %s" % outvlan in out, "vlan strip queue disable error: " + out + "vlan %s" % self.outvlan in out, "vlan strip queue disable error: " + out ) def test_vlan_insert_config(self): @@ -482,13 +577,15 @@ class TestDualVlan(TestCase): self.dut.send_expect("stop", "testpmd> ") self.dut.send_expect("port stop all", "testpmd> ") - self.dut.send_expect("tx_vlan set %s %s" % (dutTxPortId, txvlan), "testpmd> ") + self.dut.send_expect( + "tx_vlan set %s %s" % (dutTxPortId, self.txvlan), "testpmd> " + ) self.dut.send_expect("port start all", "testpmd> ") self.dut.send_expect("start", "testpmd> ") self.vlan_send_packet() out = self.get_tcpdump_package() - self.verify("vlan %s" % txvlan in out, "vlan insert enable error: " + out) + self.verify("vlan %s" % self.txvlan in out, "vlan insert enable error: " + out) self.dut.send_expect("stop", "testpmd> ") self.dut.send_expect("port stop all", "testpmd> ") @@ -498,7 +595,9 @@ class TestDualVlan(TestCase): self.vlan_send_packet() out = self.get_tcpdump_package() - self.verify("vlan %s" % txvlan not in out, "vlan insert disable error: " + out) + self.verify( + "vlan %s" % self.txvlan not in out, "vlan insert disable error: " + out + ) def test_vlan_tpid_config(self): """ @@ -510,8 +609,6 @@ class TestDualVlan(TestCase): "ICE_25G-E810C_SFP", "ICE_100G-E810C_QSFP", "I40E_40G-QSFP_B", - "I40E_10G-SFP_X722", - "I40E_10G-10G_BASE_T_X722", "IGB_1G-82574L", "I40E_10G-10G_BASE_T_BC", ], @@ -521,21 +618,27 @@ class TestDualVlan(TestCase): self.mode_config(filter="on", strip="on", extend="on") # nic only support inner model, except Intel® Ethernet 700 Series nic self.dut.send_expect("vlan set inner tpid 0x1234 %s" % dutRxPortId, "testpmd> ") - self.vlan_send_packet(outvlan, invlan) + self.vlan_send_packet(self.outvlan, self.invlan) out = self.get_tcpdump_package() self.verify("0x8100" in out, "tpid is error: " + out) - self.verify("vlan %s" % outvlan in out, "vlan tpid disable error: " + out) - self.verify("vlan %s" % invlan in out, "vlan tpid disable error: " + out) + self.verify("vlan %s" % self.outvlan in out, "vlan tpid disable error: " + out) + self.verify("vlan %s" % self.invlan in out, "vlan tpid disable error: " + out) self.dut.send_expect("vlan set inner tpid 0x8100 %s" % dutRxPortId, "testpmd> ") - self.vlan_send_packet(outvlan, invlan) + self.vlan_send_packet(self.outvlan, self.invlan) out = self.get_tcpdump_package() - self.verify("0x8100" in out, "tpid is error: " + out) - self.verify( - out is not None and "vlan" not in out, "vlane tpid enable error: " + out - ) + if self.kdriver == "i40e" and self.fwversion >= "8.40": + self.verify("0x8100" in out, "tpid is error: " + out) + self.verify( + out is not None and f"vlan {self.invlan}" not in out, + "vlane tpid enable error: " + out, + ) + else: + self.verify( + out is not None and "vlan" not in out, "vlane tpid enable error: " + out + ) def test_vlan_synthetic_test(self): """ @@ -544,7 +647,7 @@ class TestDualVlan(TestCase): self.verify( self.nic != "IGB_1G-82574L", "sorry, dual vlan cannot support this self.nic" ) - for i in range(len(vlanCase)): + for i in range(len(self.vlanCase)): self.multimode_test(i) def test_vlan_random_test(self): -- 2.27.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [dts][PATCH V2 8/8] tests/dual_vlan: modify script and test plan to support i40e fimware > 8.3 2022-11-10 5:33 ` [dts][PATCH V2 8/8] tests/dual_vlan: " Weiyuan Li @ 2022-11-18 1:59 ` Jiale, SongX 0 siblings, 0 replies; 9+ messages in thread From: Jiale, SongX @ 2022-11-18 1:59 UTC (permalink / raw) To: dts; +Cc: Li, WeiyuanX, Tu, Lijuan > -----Original Message----- > From: Weiyuan Li <weiyuanx.li@intel.com> > Sent: Thursday, November 10, 2022 1:34 PM > To: dts@dpdk.org; Tu, Lijuan <lijuan.tu@intel.com> > Cc: Li, WeiyuanX <weiyuanx.li@intel.com> > Subject: [dts][PATCH V2 8/8] tests/dual_vlan: modify script and test plan to > support i40e fimware > 8.3 > > Modify script and test plan to i40e support fimware > 8.3. > When the fimrware > 8.3, if the filter is to take effect need to enable extend. > > Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com> > --- Tested-by: Song Jiale <songx.jiale@intel.com> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-11-18 1:59 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 2/8] tests/vlan_ethertype_config: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 3/8] test_plans/vlan: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 4/8] tests/vlan: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 5/8] test_plans/ipgre: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 6/8] tests/ipgre: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 7/8] test_plans/dual_vlan: " Weiyuan Li 2022-11-10 5:33 ` [dts][PATCH V2 8/8] tests/dual_vlan: " Weiyuan Li 2022-11-18 1:59 ` Jiale, SongX
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).