From: Weiyuan Li <weiyuanx.li@intel.com>
To: dts@dpdk.org, lijuan.tu@intel.com
Cc: Weiyuan Li <weiyuanx.li@intel.com>
Subject: [dts][PATCH V2 4/8] tests/vlan: modify script and test plan to support i40e fimware > 8.3
Date: Thu, 10 Nov 2022 13:33:54 +0800 [thread overview]
Message-ID: <20221110053358.437591-4-weiyuanx.li@intel.com> (raw)
In-Reply-To: <20221110053358.437591-1-weiyuanx.li@intel.com>
Modify script and test plan to i40e support fimware > 8.3.
When the fimrware > 8.3, if the filter is to take effect need to enable
extend.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
v2:
-use the firmware version to judge whether to add command `extend on`.
tests/TestSuite_vlan.py | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/tests/TestSuite_vlan.py b/tests/TestSuite_vlan.py
index 3d8811f9..c2240c30 100644
--- a/tests/TestSuite_vlan.py
+++ b/tests/TestSuite_vlan.py
@@ -48,7 +48,14 @@ class TestVlan(TestCase):
self.pmdout.start_testpmd(
"Default", "--portmask=%s --port-topology=loop" % portMask
)
-
+ # Get the firmware version information
+ try:
+ self.fwversion, _, _ = self.pmdout.get_firmware_version(
+ self.dut_ports[0]
+ ).split()
+ except ValueError:
+ # nic IXGBE, IGC
+ self.fwversion = self.pmdout.get_firmware_version(self.dut_ports[0]).split()
self.dut.send_expect("set verbose 1", "testpmd> ")
self.dut.send_expect("set fwd mac", "testpmd> ")
self.dut.send_expect("set promisc all off", "testpmd> ")
@@ -105,6 +112,10 @@ class TestVlan(TestCase):
self.dut.send_expect(
"rx_vlan add %d %s" % (self.vlan, dutRxPortId), "testpmd> "
)
+ # Because the kernel forces enable Qinq and cannot be closed,
+ # the dpdk can only add 'extend on' to make the single VLAN filter work normally.
+ if self.kdriver == "i40e" and self.fwversion >= "8.40":
+ self.dut.send_expect("vlan set extend on %s" % dutRxPortId, "testpmd> ")
self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ")
self.dut.send_expect("start", "testpmd> ", 120)
out = self.dut.send_expect("show port info %s" % dutRxPortId, "testpmd> ", 20)
@@ -127,6 +138,10 @@ class TestVlan(TestCase):
Disable receipt of VLAN packets
"""
self.dut.send_expect("rx_vlan rm %d %s" % (self.vlan, dutRxPortId), "testpmd> ")
+ # Because the kernel forces enable Qinq and cannot be closed,
+ # the dpdk can only add 'extend on' to make the single VLAN filter work normally.
+ if self.kdriver == "i40e" and self.fwversion >= "8.40":
+ self.dut.send_expect("vlan set extend on %s" % dutRxPortId, "testpmd> ")
self.dut.send_expect("start", "testpmd> ", 120)
self.vlan_send_packet(self.vlan)
@@ -187,7 +202,8 @@ class TestVlan(TestCase):
"""
Run after each test case.
"""
- pass
+ if self.kdriver == "i40e" and self.fwversion >= "8.40":
+ self.dut.send_expect("vlan set extend off %s" % dutRxPortId, "testpmd> ")
def tear_down_all(self):
"""
--
2.27.0
next prev parent reply other threads:[~2022-11-10 5:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-10 5:33 [dts][PATCH V2 1/8] test_plans/vlan: " Weiyuan Li
2022-11-10 5:33 ` [dts][PATCH V2 2/8] tests/vlan_ethertype_config: " Weiyuan Li
2022-11-10 5:33 ` [dts][PATCH V2 3/8] test_plans/vlan: " Weiyuan Li
2022-11-10 5:33 ` Weiyuan Li [this message]
2022-11-10 5:33 ` [dts][PATCH V2 5/8] test_plans/ipgre: " Weiyuan Li
2022-11-10 5:33 ` [dts][PATCH V2 6/8] tests/ipgre: " Weiyuan Li
2022-11-10 5:33 ` [dts][PATCH V2 7/8] test_plans/dual_vlan: " Weiyuan Li
2022-11-10 5:33 ` [dts][PATCH V2 8/8] tests/dual_vlan: " Weiyuan Li
2022-11-18 1:59 ` Jiale, SongX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221110053358.437591-4-weiyuanx.li@intel.com \
--to=weiyuanx.li@intel.com \
--cc=dts@dpdk.org \
--cc=lijuan.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).