* [dts][PATCH V1 2/3] tests/ice_dcf_disable_acl_filter: add new test suite
2022-11-28 1:54 [dts][PATCH V1 0/3] add ice_dcf_disable_acl_filter jinling
2022-11-28 1:54 ` [dts][PATCH V1 1/3] test_plans/index.rst: add ice_dcf_disable_acl_filter test plan jinling
@ 2022-11-28 1:54 ` jinling
2022-11-28 1:54 ` [dts][PATCH V1 3/3] test_plans/ice_disable_acl_filter: add ice_dcf_disable_acl_filter test plan jinling
2 siblings, 0 replies; 4+ messages in thread
From: jinling @ 2022-11-28 1:54 UTC (permalink / raw)
To: dts; +Cc: lijuan.tu, jinling
The startup time of ACL engine is too long(6s+), So add a devargs that customers can use it to disable/enable acl angine.
add new test suite to test acl engine is disabled.
Signed-off-by: jinling <jin.ling@intel.com>
---
tests/TestSuite_ice_dcf_disable_acl_filter.py | 267 ++++++++++++++++++
1 file changed, 267 insertions(+)
create mode 100644 tests/TestSuite_ice_dcf_disable_acl_filter.py
diff --git a/tests/TestSuite_ice_dcf_disable_acl_filter.py b/tests/TestSuite_ice_dcf_disable_acl_filter.py
new file mode 100644
index 00000000..30334a26
--- /dev/null
+++ b/tests/TestSuite_ice_dcf_disable_acl_filter.py
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation
+#
+
+
+import re
+import time
+
+from framework.packet import Packet
+from framework.pmd_output import PmdOutput
+from framework.test_case import TestCase, check_supported_nic
+from framework.utils import BLUE, GREEN, RED
+
+rule_switch_unsupported = {
+ "message": "ice_flow_create(): Failed to create flow",
+ "ipv4": [
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask 00:ff:ff:ff:ff:ff / ipv4 / end actions drop / end",
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 33:00:00:00:00:02 dst mask ff:ff:ff:ff:ff:fe / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / end actions drop / end",
+ ],
+ "ipv4_tcp": [
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:fe / ipv4 / tcp / end actions drop / end",
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / tcp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end",
+ ],
+ "ipvv4_udp": [
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:fe / ipv4 / udp / end actions drop / end",
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / udp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end",
+ ],
+ "ipv4_sctp": [
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:fe / ipv4 / sctp / end actions drop / end",
+ "flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / sctp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / sctp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.243 / sctp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 / sctp src spec 8010 src mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 / sctp dst spec 8010 dst mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / sctp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / sctp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end",
+ ],
+}
+
+rule_switch_supported = {
+ "message": "Succeeded to create (2) flow",
+ "ipv4": [
+ "flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:ff / ipv4 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.0 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / end actions drop / end",
+ ],
+ "ipv4_tcp": [
+ "flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / tcp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / tcp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.243 / tcp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 / tcp src spec 8010 src mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 / tcp dst spec 8010 dst mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / tcp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end",
+ ],
+ "ipvv4_udp": [
+ "flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / udp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / udp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.243 / udp / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 / udp src spec 8010 src mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 / udp dst spec 8010 dst mask 65520 / end actions drop / end",
+ "flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / udp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end",
+ ],
+}
+
+subcases = {
+ "case": [rule_switch_supported, rule_switch_unsupported],
+ "result": [],
+}
+
+
+class ICEDCFACLDisableFilterTest(TestCase):
+ supported_nic = ["ICE_25G-E810C_SFP", "ICE_25G-E810_XXV_SFP", "ICE_100G-E810C_QSFP"]
+
+ @check_supported_nic(supported_nic)
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ # Verify that enough ports are available
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ localPort0 = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_iface0 = self.tester.get_interface(localPort0)
+ self.pf0_intf = self.dut.ports_info[self.dut_ports[0]]["intf"]
+ self.dut.send_expect("ifconfig %s up" % self.tester_iface0, "# ")
+ self.pkt = Packet()
+ self.pmd_output = PmdOutput(self.dut)
+ self.testpmd_status = "close"
+ # bind pf to kernel
+ self.dut.bind_interfaces_linux("ice")
+ # set vf driver
+ self.vf_driver = "vfio-pci"
+ self.dut.send_expect("modprobe vfio-pci", "# ")
+ self.path = self.dut.apps_name["test-pmd"]
+ self.setup_1pf_1vf_env()
+ self.dut.send_expect("ifconfig %s up" % self.tester_iface0, "# ", 15)
+
+ def setup_1pf_1vf_env(self, pf_port=0, driver="default"):
+
+ self.used_dut_port_0 = self.dut_ports[pf_port]
+ # get PF interface name
+ out = self.dut.send_expect("ethtool -i %s" % self.pf0_intf, "#")
+ # generate 1 VF on PF
+ self.dut.generate_sriov_vfs_by_port(self.used_dut_port_0, 1, driver=driver)
+ self.sriov_vfs_port_0 = self.dut.ports_info[self.used_dut_port_0]["vfs_port"]
+ self.vf0_pci = self.sriov_vfs_port_0[0].pci
+ # set VF0 as trust
+ self.dut.send_expect("ip link set %s vf 0 trust on" % self.pf0_intf, "#")
+ # bind drivers
+ for port in self.sriov_vfs_port_0:
+ port.bind_driver(self.vf_driver)
+ time.sleep(5)
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.setup_1pf_1vf_env()
+
+ def create_testpmd_command(self, param, acl_status):
+ """
+ Create testpmd command
+ """
+ # Prepare testpmd EAL and parameters
+ if acl_status != "":
+ all_eal_param = self.dut.create_eal_parameters(
+ cores="1S/4C/1T",
+ ports=[self.vf0_pci],
+ port_options={self.vf0_pci: "cap=dcf,acl=" + acl_status},
+ )
+ else:
+ all_eal_param = self.dut.create_eal_parameters(
+ cores="1S/4C/1T",
+ ports=[self.vf0_pci],
+ port_options={self.vf0_pci: "cap=dcf"},
+ )
+ command = self.path + all_eal_param + "--log-level='ice,7'" + " -- -i" + param
+ return command
+
+ def launch_testpmd(self, param="", acl_status="off"):
+ """
+ launch testpmd with the command
+ """
+ time.sleep(5)
+ command = self.create_testpmd_command(param, acl_status)
+ out = self.dut.send_expect(command, "testpmd> ", 20)
+ # self.testpmd_status = "running"
+ return out
+
+ def create_acl_filter_rule(self, rules, session_name="", check_stats=False):
+ """
+ Create acl filter rules,
+ set check_stats=False to check all rules can not be created by acl engine successfully
+ """
+ if session_name == "":
+ session_name = self.dut
+
+ rule_list = {}
+ # switch_rule = "Succeeded to create (2) flow"
+ # failed_rule = "ice_flow_create(): Failed to create flow"
+
+ # if isinstance(rules, list):
+ for item in rules.values():
+ if isinstance(item, list):
+ for rule in item:
+ out = session_name.send_expect(rule, "testpmd> ")
+ if rules["message"] in out:
+ rule_list.update({rule: False})
+ else:
+ rule_list.update({rule: True})
+
+ if check_stats:
+ self.verify(
+ all(list(rule_list.values())),
+ "some rules created successfully, result %s, rule %s"
+ % (rule_list, rules),
+ )
+ else:
+ self.verify(
+ not any(list(rule_list.values())),
+ "all rules should create failed, result {}".format(rule_list),
+ )
+
+ def test_startup_time(self):
+
+ repeat_time = 5
+ start_up_time_acl_off = []
+ start_up_time_acl_on = []
+ regex = re.compile(".*real (\d+\.\d{2}).*")
+ # acl = off
+ command_acl_off = self.create_testpmd_command(param="", acl_status="off")
+ # acl = on
+ command_acl_on = self.create_testpmd_command(param="", acl_status="")
+ # record startup time
+ for i in range(repeat_time):
+ out_acl_off = self.dut.send_expect(
+ "echo quit | time -p ./%s" % (command_acl_off),
+ "#",
+ 120,
+ )
+
+ out_acl_on = self.dut.send_expect(
+ "echo quit | time -p ./%s" % (command_acl_on),
+ "#",
+ 120,
+ )
+
+ time_acl_on = regex.findall(out_acl_on)[0]
+ time_acl_off = regex.findall(out_acl_off)[0]
+ if time_acl_on != "" and time_acl_off != "":
+ start_up_time_acl_off.append(eval(time_acl_off))
+ start_up_time_acl_on.append(eval(time_acl_on))
+ # get the average
+ avg_start_up_time_acl_on = sum(start_up_time_acl_on) / repeat_time
+ avg_start_up_time_acl_off = sum(start_up_time_acl_off) / repeat_time
+ self.verify(
+ avg_start_up_time_acl_on >= avg_start_up_time_acl_off + 6,
+ "disable acl to reduce startup time failed!!!",
+ )
+ self.testpmd_status = "close"
+
+ def test_disable_acl(self):
+
+ launch_testpmd = True
+ if launch_testpmd:
+ # launch testpmd
+ self.launch_testpmd(acl_status="off")
+
+ self.dut.send_expect("flow flush 0", "testpmd> ", 120)
+
+ for subcase in subcases["case"]:
+ # test subcase 01
+ try:
+ self.create_acl_filter_rule(subcase)
+
+ except Exception as e:
+ print(RED(e))
+ subcases["result"].append(False)
+ self.verify(all(subcases["result"]), "test disable failed.")
+
+ self.testpmd_status = "open"
+
+ def quit_testpmd(self):
+ """
+ quit testpmd
+ """
+ if self.testpmd_status != "close":
+ # destroy all flow rules on DCF
+ self.dut.send_expect("flow flush 0", "testpmd> ", 15)
+ self.dut.send_expect("clear port stats all", "testpmd> ", 15)
+ self.dut.send_expect("quit", "#", 30)
+ # kill all DPDK application
+ self.dut.kill_all()
+ # self.testpmd_status = "close"
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.quit_testpmd()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [dts][PATCH V1 3/3] test_plans/ice_disable_acl_filter: add ice_dcf_disable_acl_filter test plan
2022-11-28 1:54 [dts][PATCH V1 0/3] add ice_dcf_disable_acl_filter jinling
2022-11-28 1:54 ` [dts][PATCH V1 1/3] test_plans/index.rst: add ice_dcf_disable_acl_filter test plan jinling
2022-11-28 1:54 ` [dts][PATCH V1 2/3] tests/ice_dcf_disable_acl_filter: add new test suite jinling
@ 2022-11-28 1:54 ` jinling
2 siblings, 0 replies; 4+ messages in thread
From: jinling @ 2022-11-28 1:54 UTC (permalink / raw)
To: dts; +Cc: lijuan.tu, jinling
The startup time of ACL engine is too long (6s+), so add a devargs that customers can use it to disable/enable ACL engine.
add new test plan to test acl angine is disabled
Signed-off-by: jinling <jin.ling@intel.com>
---
.../ice_dcf_disable_acl_filter_test_plan.rst | 252 ++++++++++++++++++
1 file changed, 252 insertions(+)
create mode 100644 test_plans/ice_dcf_disable_acl_filter_test_plan.rst
diff --git a/test_plans/ice_dcf_disable_acl_filter_test_plan.rst b/test_plans/ice_dcf_disable_acl_filter_test_plan.rst
new file mode 100644
index 00000000..12a6562b
--- /dev/null
+++ b/test_plans/ice_dcf_disable_acl_filter_test_plan.rst
@@ -0,0 +1,252 @@
+.. Copyright (c) <2015-2017>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================
+ICE DCF disable ACL engine
+==========================
+
+Description
+===========
+
+Support disabling DCF ACL engine via devarg "acl=off" in cmdline, aiming to shorten the DCF startup time.
+After disabling the ACL engine, some of the rules supported by the ACL engine will be created by the switch engine and others will failed to be created.
+as shown in the following table.
+
++-----------+-------------------------------------------------------------------------+---------+---------+
+| Pattern | Input Set | ACL | Switch |
++===========+=========================================================================+=========+=========+
+| IPv4 | [Source MAC] | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest MAC] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source IP],[Dest IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source MAC],[Dest MAC],[Source IP],[Dest IP] | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| IPv4_TCP | [Source MAC] | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest MAC] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source port] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest port] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source IP],[Dest IP],[Source port],[Dest port] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source MAC],[Dest MAC],[Source IP],[Dest IP],[Source port],[Dest port] | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| IPv4_UDP | [Source MAC] | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest MAC] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest IP] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source port] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Dest port] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source IP],[Dest IP],[Source port],[Dest port] | success | success |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| | [Source MAC],[Dest MAC],[Source IP],[Dest IP],[Source port],[Dest port] | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+| IPv4_SCTP | all input sets | success | fail |
++-----------+-------------------------------------------------------------------------+---------+---------+
+
+
+Prerequisitess
+=============
+
+Topology
+--------
+
+ dut_port_0 <---> tester_port_0
+ dut_port_1 <---> tester_port_1
+
+Hardware
+--------
+
+ Supportted NICs: columbiaville_25g/columbiaville_100g
+
+Software
+--------
+
+ dpdk: http://dpdk.org/git/dpdk
+ scapy: http://www.secdev.org/projects/scapy/
+
+General set up
+--------------
+
+1. Compile DPDK::
+
+ CC=gcc meson -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ ninja -C x86_64-native-linuxapp-gcc
+
+2. Get the pci device id of DUT, for example::
+
+ ./usertools/dpdk-devbind.py -s
+
+ 0000:17:00.0 'Ethernet Controller E810-C for QSFP 1592' if=ens9 drv=ice unused=vfio-pci
+
+3. Generate 2 VFs on PF0::
+
+ echo 2 > /sys/bus/pci/devices/0000:17:00.0/sriov_numvfs
+
+ ./usertools/dpdk-devbind.py -s
+ 0000:17:01.0 'Ethernet Adaptive Virtual Function 1889' drv=vfio-pci unused=iavf
+ 0000:17:01.1 'Ethernet Adaptive Virtual Function 1889' drv=vfio-pci unused=iavf
+
+4. Set VF0 as trust and set VF1 mac adress::
+
+ ip link set ens9 vf 0 trust on
+ ip link set enp9 vf 1 mac 00:01:23:45:67:89
+
+5. Bind VFs to dpdk driver::
+
+ modprobe vfio-pci
+ ./usertools/dpdk-devbind.py -b vfio-pci 0000:17:01.0 0000:17:01.1
+
+6. Start testpmd on VF0 and VF1, VF0 request DCF mode and set "devargs" parameter "acl=off" to disable the ACL engine::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:17:01.0,cap=dcf,acl=off -a 17:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
+
+ Check that when starting testpmd, the application prints "ice_flow_init():Engine 4 disabled"
+
+ Quit testpmd::
+
+ testpmd> quit
+
+ Check that when quitting testpmd, the application prints "ice_flow_uninit():Engine 4 disabled skip it"
+
+Test Case
+=========
+
+Test Case 1: Compare start-up time
+-----------------------------------
+It takes too much time to enable the ACL engine when starting testpmd, so the startup time should be shortened after disabling ACL.
+
+test steps
+~~~~~~~~~~
+
+1. Disable ACL, execute command and record the time "start_time_disable_acl"::
+
+ echo quit | time ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:17:01.0,cap=dcf,acl=off -a 17:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
+
+2. Enable ACL, execute command and record the time "start_time_enable_acl"::
+
+ echo quit | time ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:17:01.0,cap=dcf -a 17:01.1 --file-prefix=vf1 --log-level="ice,7" -- -i
+
+3. Repeat step 1~2 for at least 5 times to get the average time of "start_time_disable_acl" and "start_time_enable_acl".
+
+
+expected result
+~~~~~~~~~~~~~~~
+
+Check that the average start-up time with "acl=off" is at least 6 seconds shorter than that without "acl=off".
+
+Test Case 2: disable ACL engine
+-------------------------------
+
+test steps
+~~~~~~~~~~
+
+1. Start testpmd::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:17:01.0,cap=dcf,acl=off -a 17:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
+
+2. Create ACL rules on port 0::
+
+ Switch supported rules::
+
+ ipv4:
+ flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:ff / ipv4 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.0 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / end actions drop / end
+ ipv4_tcp:
+ flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / tcp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / tcp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.243 / tcp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 / tcp src spec 8010 src mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 / tcp dst spec 8010 dst mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / tcp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
+ ipvv4_udp:
+ flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.243 / udp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 / udp src spec 8010 src mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 / udp dst spec 8010 dst mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / udp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
+
+ Switch not supported rules::
+
+ ipv4:
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask 00:ff:ff:ff:ff:ff / ipv4 / end actions drop / end
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 33:00:00:00:00:02 dst mask ff:ff:ff:ff:ff:fe / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / end actions drop / end
+ ipv4_tcp:
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:fe / ipv4 / tcp / end actions drop / end
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / tcp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
+ ipvv4_udp:
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:fe / ipv4 / udp / end actions drop / end
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / udp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
+ ipv4_sctp:
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:fe / ipv4 / sctp / end actions drop / end
+ flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / sctp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.254 / sctp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.2 dst mask 255.255.255.243 / sctp / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 / sctp src spec 8010 src mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 / sctp dst spec 8010 dst mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / sctp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
+ flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff / ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / sctp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
+
+expected result
+~~~~~~~~~~~~~~~
+
+ Check that switch support rules will be created::
+
+ ice_flow_create(): Succeeded to create (2) flow
+
+ switch not support rules will be created failed::
+
+ ice_flow_create(): Failed to create flow
+ port_flow_complain(): Caught PMD error type 10 (item specification): cause: 0x7ffd63133730,Invalid input set: Invalid argument
+
+ Both outputs mean that the ACL engine has been disabled.
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread