From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V4 1/2] test_plans/basic_4k_pages_cbdma_test_plan: modify the dmas parameter by DPDK changed
Date: Mon, 28 Nov 2022 10:42:18 +0800 [thread overview]
Message-ID: <20221128024218.2314773-1-weix.ling@intel.com> (raw)
From DPDK-22.11, the dmas parameter have changed, so modify the dmas
parameter in the testplan.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/basic_4k_pages_cbdma_test_plan.rst | 626 +++++++++---------
1 file changed, 318 insertions(+), 308 deletions(-)
diff --git a/test_plans/basic_4k_pages_cbdma_test_plan.rst b/test_plans/basic_4k_pages_cbdma_test_plan.rst
index 009a200c..495eb73b 100644
--- a/test_plans/basic_4k_pages_cbdma_test_plan.rst
+++ b/test_plans/basic_4k_pages_cbdma_test_plan.rst
@@ -20,23 +20,35 @@ vhost-user/virtio-net mergeable path.
3.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring and packed ring
vhost-user/virtio-net mergeable path.
-Note:
+.. note::
-1. When CBDMA channels are bound to vfio driver, VA mode is the default and recommended.
-For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
-2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd. And case 4-5 have not yet been automated.
+ 1. When CBDMA channels are bound to vfio driver, VA mode is the default and recommended.
+ For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
+ 2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd. In this patch,
+ we enable asynchronous data path for vhostpmd. Asynchronous data path is enabled per tx/rx queue, and users need to specify
+ the DMA device used by the tx/rx queue. Each tx/rx queue only supports to use one DMA device (This is limited by the
+ implementation of vhostpmd), but one DMA device can be shared among multiple tx/rx queues of different vhost PMD ports.
-For more about dpdk-testpmd sample, please refer to the DPDK docments:
-https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html
-For virtio-user vdev parameter, you can refer to the DPDK docments:
-https://doc.dpdk.org/guides/nics/virtio.html#virtio-paths-selection-and-usage.
+ Two PMD parameters are added:
+ - dmas: specify the used DMA device for a tx/rx queue.(Default: no queues enable asynchronous data path)
+ - dma-ring-size: DMA ring size.(Default: 4096).
+
+ Here is an example:
+ --vdev 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma-ring-size=2048'
+
+ For more about dpdk-testpmd sample, please refer to the DPDK docments:
+ https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html
+ For virtio-user vdev parameter, you can refer to the DPDK docments:
+ https://doc.dpdk.org/guides/nics/virtio.html#virtio-paths-selection-and-usage.
Prerequisites
=============
Software
--------
-Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
+ Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
+ iperf
+ qemu: https://download.qemu.org/qemu-7.1.0.tar.xz
General set up
--------------
@@ -46,9 +58,9 @@ General set up
# CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
# ninja -C <dpdk build dir> -j 110
- For example:
- CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
- ninja -C x86_64-native-linuxapp-gcc -j 110
+ For example:
+ CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
+ ninja -C x86_64-native-linuxapp-gcc -j 110
3. Get the PCI device ID and DMA device ID of DUT, for example, 0000:18:00.0 is PCI device ID, 0000:00:04.0, 0000:00:04.1 is DMA device ID::
@@ -65,10 +77,10 @@ General set up
4. Prepare tmpfs with 4K-pages::
- mkdir /mnt/tmpfs_nohuge0
- mkdir /mnt/tmpfs_nohuge1
- mount tmpfs /mnt/tmpfs_nohuge0 -t tmpfs -o size=4G
- mount tmpfs /mnt/tmpfs_nohuge1 -t tmpfs -o size=4G
+ mkdir /mnt/tmpfs_nohuge0
+ mkdir /mnt/tmpfs_nohuge1
+ mount tmpfs /mnt/tmpfs_nohuge0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_nohuge1 -t tmpfs -o size=4G
Test case
=========
@@ -85,234 +97,239 @@ Common steps
Test Case 1: Basic test vhost-user/virtio-user split ring vhost async operation using 4K-pages and cbdma enable
---------------------------------------------------------------------------------------------------------------
-This case tests basic functions of split ring virtio path when uses the asynchronous operations with CBDMA channels in 4K-pages memory environment and PVP vhost-user/virtio-user topology.
+This case tests basic functions of split ring virtio path when uses the asynchronous operations with CBDMA channels
+in 4K-pages memory environment and PVP vhost-user/virtio-user topology.
-1. Bind one port to vfio-pci, launch vhost::
+1. Bind 1 CBDMA port and 1 NIC port to vfio-pci, launch vhost::
- ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:18:00.0 -a 0000:00:04.0 \
- --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0;rxq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:00:04.0]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost \
+ -a 0000:18:00.0 -a 0000:00:04.0 \
+ --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0@0000:00:04.0;rxq0@0000:00:04.0]' \
+ -- -i --no-numa --socket-num=0
+ testpmd>start
2. Launch virtio-user with 4K-pages::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 \
+ -- -i
+ testpmd>start
3. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
- testpmd>show port stats all
+ testpmd>show port stats all
Test Case 2: Basic test vhost-user/virtio-user packed ring vhost async operation using 4K-pages and cbdma enable
----------------------------------------------------------------------------------------------------------------
-This case tests basic functions of packed ring virtio path when uses the asynchronous operations with CBDMA channels in 4K-pages memory environment and PVP vhost-user/virtio-user topology.
+This case tests basic functions of packed ring virtio path when uses the asynchronous operations with CBDMA channels
+in 4K-pages memory environment and PVP vhost-user/virtio-user topology.
-1. Bind one port to vfio-pci, launch vhost::
+1. Bind 1 CBDMA port and 1 NIC port to vfio-pci, launch vhost::
- modprobe vfio-pci
- ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:18:00.0 -a 0000:00:04.0 \
- --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0;rxq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:00:04.0]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost \
+ -a 0000:18:00.0 -a 0000:00:04.0 \
+ --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0@0000:00:04.0;rxq0@0000:00:04.0]' \
+ -- -i --no-numa --socket-num=0
+ testpmd>start
2. Launch virtio-user with 4K-pages::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 \
+ -- -i
+ testpmd>start
3. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
- testpmd>show port stats all
+ testpmd>show port stats all
Test Case 3: VM2VM vhost-user/virtio-net split ring vhost async operation test with tcp traffic using 4K-pages and cbdma enable
-------------------------------------------------------------------------------------------------------------------------------
-This case test the function of Vhost TSO in the topology of vhost-user/virtio-net split ring mergeable path by verifing the TSO/cksum in the TCP/IP stack
-when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
+This case test the function of Vhost TSO in the topology of vhost-user/virtio-net split ring mergeable path by verifing the
+TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
-1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+1. Bind 2 CBDMA port to vfio-pci, then launch vhost by below command::
- rm -rf vhost-net*
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 \
- --vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
- --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:00:04.0,lcore4@0000:00:04.1]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@0000:00:04.0;rxq0@0000:00:04.0],dma-ring-size=2048' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@0000:00:04.1;rxq0@0000:00:04.1],dma-ring-size=2048' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
2. Launch VM1 and VM2::
- taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
-
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04.img \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
5. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
6. Check 2VMs can receive and send big packets to each other::
- testpmd>show port xstats all
- Port 0 should have tx packets above 1522
- Port 1 should have rx packets above 1522
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
Test Case 4: VM2VM vhost-user/virtio-net packed ring vhost async operation test with tcp traffic using 4K-pages and cbdma enable
--------------------------------------------------------------------------------------------------------------------------------
-This case test the function of Vhost TSO in the topology of vhost-user/virtio-net packed ring mergeable path by verifing the TSO/cksum in the TCP/IP stack
-when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
+This case test the function of Vhost TSO in the topology of vhost-user/virtio-net packed ring mergeable path by verifing the
+TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
-1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+1. Bind 2 CBDMA port to vfio-pci, then launch vhost by below command::
- rm -rf vhost-net*
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 \
- --vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
- --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:00:04.0,lcore4@0000:00:04.1]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@0000:00:04.0;rxq0@0000:00:04.0],dma-ring-size=2048' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@0000:00:04.1;rxq0@0000:00:04.1],dma-ring-size=2048' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
2. Launch VM1 and VM2::
- taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
-
- taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04.img \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
5. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
6. Check 2VMs can receive and send big packets to each other::
- testpmd>show port xstats all
- Port 0 should have tx packets above 1522
- Port 1 should have rx packets above 1522
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
Test Case 5: vm2vm vhost/virtio-net split ring multi queues using 4K-pages and cbdma enable
-------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
-split ring mergeable path when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment. The dynamic change of multi-queues number is also tested.
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid
+after packets forwarding in vm2vm vhost-user/virtio-net split ring mergeable path when vhost
+uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
+The dynamic change of multi-queues number is also tested.
-1. Bind one port to vfio-pci, launch vhost::
+1. Bind 4 CBDMA port to vfio-pci, launch vhost::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore2@0000:00:04.4,lcore2@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.1;txq5@0000:00:04.1;txq6@0000:00:04.1;txq7@0000:00:04.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.2;txq2@0000:00:04.2;txq3@0000:00:04.2;txq4@0000:00:04.3;txq5@0000:00:04.3;txq6@0000:00:04.3;txq7@0000:00:04.3]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
2. Launch VM qemu::
- taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
-
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
5. Scp 1MB file form VM1 to VM2::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
6. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
7. Quit and relaunch vhost w/ diff CBDMA channels::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.0,lcore3@0000:00:04.2,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:00:04.1,lcore4@0000:00:04.3,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.0;txq5@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1;rxq4@0000:00:04.1;rxq5@0000:00:04.1;rxq6@0000:00:04.1;rxq7@0000:00:04.1],dma-ring-size=1024' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.2;txq2@0000:00:04.2;txq3@0000:00:04.2;txq4@0000:00:04.2;txq5@0000:00:04.2;rxq2@0000:00:04.3;rxq3@0000:00:04.3;rxq4@0000:00:04.3;rxq5@0000:00:04.3;rxq6@0000:00:04.3;rxq7@0000:00:04.3],dma-ring-size=1024' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
8. Rerun step 5-6.
@@ -325,11 +342,11 @@ split ring mergeable path when vhost uses the asynchronous operations with CBDMA
10. On VM1, set virtio device::
- ethtool -L ens5 combined 4
+ ethtool -L ens5 combined 4
11. On VM2, set virtio device::
- ethtool -L ens5 combined 4
+ ethtool -L ens5 combined 4
12. Scp 1MB file form VM1 to VM2::
@@ -342,227 +359,220 @@ split ring mergeable path when vhost uses the asynchronous operations with CBDMA
14. Quit and relaunch vhost with 1 queues::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
15. On VM1, set virtio device::
- ethtool -L ens5 combined 1
+ ethtool -L ens5 combined 1
16. On VM2, set virtio device::
- ethtool -L ens5 combined 1
+ ethtool -L ens5 combined 1
17. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
18. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Test Case 6: vm2vm vhost/virtio-net packed ring multi queues using 4K-pages and cbdma enable
--------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
-packed ring mergeable path when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid
+after packets forwarding in vm2vm vhost-user/virtio-net packed ring mergeable path when vhost
+uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
-1. Bind one port to vfio-pci, launch vhost::
+1. Bind 2 CBDMA port to vfio-pci, launch vhost::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore2@0000:00:04.4,lcore2@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.1;txq5@0000:00:04.1;txq6@0000:00:04.1;txq7@0000:00:04.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.1;txq5@0000:00:04.1;txq6@0000:00:04.1;txq7@0000:00:04.1]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
2. Launch VM qemu::
- taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
-
- taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu22-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
5. Scp 1MB file form VM1 to VM2::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
6. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Test Case 7: vm2vm vhost/virtio-net split ring multi queues using 1G/4k-pages and cbdma enable
----------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
-split ring mergeable path when vhost uses the asynchronous operations with CBDMA channels,the back-end is in 1G-pages memory environment and the front-end is in 4k-pages memory environment.
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid
+after packets forwarding in vm2vm vhost-user/virtio-net split ring mergeable path when vhost
+uses the asynchronous operations with CBDMA channels,the back-end is in 1G-pages memory
+environment and the front-end is in 4k-pages memory environment.
-1. Bind 16 CBDMA channel to vfio-pci, launch vhost::
+1. Bind 4 CBDMA port to vfio-pci, launch vhost::
- ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1 0000:80:04.2 0000:80:04.3 0000:80:04.4 0000:80:04.5 0000:80:04.6 0000:80:04.7 \
- 0000:00:04.0 0000:00:04.1 0000:00:04.2 0000:00:04.3 0000:00:04.4 0000:00:04.5 0000:00:04.6 0000:00:04.7
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore31@0000:00:04.4,lcore31@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore33@0000:80:04.4,lcore33@0000:80:04.5,lcore33@0000:80:04.6,lcore33@0000:80:04.7]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.0;txq5@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1;rxq4@0000:00:04.1;rxq5@0000:00:04.1;rxq6@0000:00:04.1;rxq7@0000:00:04.1],dma-ring-size=1024' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.0;txq5@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1;rxq4@0000:00:04.1;rxq5@0000:00:04.1;rxq6@0000:00:04.1;rxq7@0000:00:04.1],dma-ring-size=1024' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
2. Launch VM qemu::
- taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
- -chardev socket,id=char0,path=./vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
-
- taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+ taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
5. Scp 1MB file form VM1 to VM2::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
6. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
7. Quit and relaunch vhost w/ diff CBDMA channels::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.0,lcore3@0000:00:04.2,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:00:04.1,lcore4@0000:00:04.3,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq00000:00:04.0;txq10000:00:04.0;txq20000:00:04.0;txq30000:00:04.0;txq4@0000:00:04.1;txq5@0000:00:04.1;txq6@0000:00:04.1;txq7@0000:00:04.1;rxq0@0000:00:04.2;rxq1@0000:00:04.2;rxq2@0000:00:04.2;rxq3@0000:00:04.2;rxq4@0000:00:04.3;rxq5@0000:00:04.3;rxq6@0000:00:04.3;rxq7@0000:00:04.3]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq00000:00:04.0;txq10000:00:04.0;txq20000:00:04.0;txq30000:00:04.0;txq4@0000:00:04.1;txq5@0000:00:04.1;txq6@0000:00:04.1;txq7@0000:00:04.1;rxq0@0000:00:04.2;rxq1@0000:00:04.2;rxq2@0000:00:04.2;rxq3@0000:00:04.2;rxq4@0000:00:04.3;rxq5@0000:00:04.3;rxq6@0000:00:04.3;rxq7@0000:00:04.3]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
8. Rerun step 5-6.
Test Case 8: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and cbdma enable
----------------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
-split and packed ring mergeable path when vhost uses the asynchronous operations with CBDMA channels,the back-end is in 1G-pages memory environment and the front-end is in 4k-pages memory environment.
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after
+packets forwarding in vm2vm vhost-user/virtio-net split and packed ring mergeable path when vhost
+uses the asynchronous operations with CBDMA channels,the back-end is in 1G-pages memory environment
+and the front-end is in 4k-pages memory environment.
-1. Bind 16 CBDMA channel to vfio-pci, launch vhost::
+1. Bind 8 CBDMA port to vfio-pci, launch vhost::
- ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1 0000:80:04.2 0000:80:04.3 0000:80:04.4 0000:80:04.5 0000:80:04.6 0000:80:04.7 \
- 0000:00:04.0 0000:00:04.1 0000:00:04.2 0000:00:04.3 0000:00:04.4 0000:00:04.5 0000:00:04.6 0000:00:04.7
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore31@0000:00:04.4,lcore31@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore33@0000:80:04.4,lcore33@0000:80:04.5,lcore33@0000:80:04.6,lcore33@0000:80:04.7]
- testpmd>start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.0;txq3@0000:00:04.0;txq4@0000:00:04.1;txq5@0000:00:04.1;rxq2@0000:00:04.2;rxq3@0000:00:04.2;rxq4@0000:00:04.3;rxq5@0000:00:04.3;rxq6@0000:00:04.3;rxq7@0000:00:04.3]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.4;txq1@0000:00:04.4;txq2@0000:00:04.4;txq3@0000:00:04.4;txq4@0000:00:04.5;txq5@0000:00:04.5;rxq2@0000:00:04.6;rxq3@0000:00:04.6;rxq4@0000:00:04.6;rxq5@0000:00:04.6;rxq6@0000:00:04.7;rxq7@0000:00:04.7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
2. Launch VM qemu::
- taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
- -chardev socket,id=char0,path=./vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
-
- taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+ taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
5. Scp 1MB file form VM1 to VM2::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
6. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
7. Relaunch VM1, and rerun step 3.
--
2.25.1
reply other threads:[~2022-11-28 2:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221128024218.2314773-1-weix.ling@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).