* [DTS][PATCH V1 1/2] test_plans/ice_qinq: update test plan to support represented port action from deprecated vf action
2022-11-30 3:56 [DTS][PATCH V1 0/2] update test plans and tests to support represented port action and port representor action from deprecated vf action in ice_qinq Ke Xu
@ 2022-11-30 3:56 ` Ke Xu
2022-11-30 3:56 ` [DTS][PATCH V1 2/2] tests/ice_qinq: " Ke Xu
1 sibling, 0 replies; 3+ messages in thread
From: Ke Xu @ 2022-11-30 3:56 UTC (permalink / raw)
To: dts; +Cc: lijuan.tu, Ke Xu
A new API is introduced to replace the VF actions in DPDK 22.11. To support This
new API, several modifications are made.
Testpmd args are modified to support appyling representors for the new API. Rules
are modified for the old API being deprecated, changing to the new API. Ports id
are modified corresponding to the port representors and modified API.
Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
test_plans/ice_qinq_test_plan.rst | 104 +++++++++++++++---------------
1 file changed, 52 insertions(+), 52 deletions(-)
diff --git a/test_plans/ice_qinq_test_plan.rst b/test_plans/ice_qinq_test_plan.rst
index 37396f41..7c157575 100644
--- a/test_plans/ice_qinq_test_plan.rst
+++ b/test_plans/ice_qinq_test_plan.rst
@@ -80,7 +80,7 @@ Prerequisites
12. For test cases for DCF switch filter(01-06), use below cmd to launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -a 0000:18:01.2 -a 0000:18:01.3 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf,representor=[1] -a 0000:18:01.1 -a 0000:18:01.2 -a 0000:18:01.3 -- -i
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
@@ -139,7 +139,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -170,7 +170,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -201,7 +201,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -235,7 +235,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -266,7 +266,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -297,7 +297,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -330,7 +330,7 @@ Test case 03: DCF switch for MAC_QINQ_PPPOE_PAY
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -368,7 +368,7 @@ Test case 04: DCF switch for MAC_QINQ_PPPOE_PAY_Proto
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -403,7 +403,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -435,7 +435,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -467,7 +467,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -502,7 +502,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -534,7 +534,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -566,7 +566,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1577,7 +1577,7 @@ Common Steps
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf -a 0000:3b:01.1" for this test plan.
+ For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf,representor=[1] -a 0000:3b:01.1" for this test plan.
2. Set verbose::
@@ -1622,7 +1622,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1630,7 +1630,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1643,7 +1643,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV4 => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1651,11 +1651,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1680,7 +1680,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test Case 2: MAC_QINQ_IPV6
--------------------------
@@ -1690,7 +1690,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1698,7 +1698,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1711,7 +1711,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV6 => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1719,11 +1719,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1748,7 +1748,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test Case 3: MAC_QINQ_IPV4_UDP
------------------------------
@@ -1758,7 +1758,7 @@ Test steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1766,7 +1766,7 @@ Test steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1779,7 +1779,7 @@ Test steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV4 UDP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1787,11 +1787,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1816,7 +1816,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test Case 4: MAC_QINQ_IPV4_TCP
------------------------------
@@ -1826,7 +1826,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1834,7 +1834,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1847,7 +1847,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV4 TCP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1855,11 +1855,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1884,7 +1884,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
#Pipeline mode
@@ -1896,7 +1896,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1904,7 +1904,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1917,7 +1917,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV6 UDP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1925,11 +1925,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1954,7 +1954,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test case 6: MAC_QINQ_IPV6_TCP
------------------------------
@@ -1964,7 +1964,7 @@ Test steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1972,7 +1972,7 @@ Test steps
2. Create a rule and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1985,7 +1985,7 @@ Test steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV6 TCP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1993,11 +1993,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -2022,6 +2022,6 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread* [DTS][PATCH V1 2/2] tests/ice_qinq: update test plan to support represented port action from deprecated vf action
2022-11-30 3:56 [DTS][PATCH V1 0/2] update test plans and tests to support represented port action and port representor action from deprecated vf action in ice_qinq Ke Xu
2022-11-30 3:56 ` [DTS][PATCH V1 1/2] test_plans/ice_qinq: update test plan to support represented port action from deprecated vf action Ke Xu
@ 2022-11-30 3:56 ` Ke Xu
1 sibling, 0 replies; 3+ messages in thread
From: Ke Xu @ 2022-11-30 3:56 UTC (permalink / raw)
To: dts; +Cc: lijuan.tu, Ke Xu
A new API is introduced to replace the VF actions in DPDK 22.11. To support This
new API, several modifications are made.
Method calling of launch_testpmd is updated to enable representor.
Testpmd args are modified to support appyling representors for the new API. Rules
are modified for the old API being deprecated, changing to the new API. Ports id
are modified corresponding to the port representors and modified API.
Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
tests/TestSuite_ice_qinq.py | 96 ++++++++++++++++++-------------------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/tests/TestSuite_ice_qinq.py b/tests/TestSuite_ice_qinq.py
index c6123643..8dde338a 100644
--- a/tests/TestSuite_ice_qinq.py
+++ b/tests/TestSuite_ice_qinq.py
@@ -15,7 +15,7 @@ from .rte_flow_common import RssProcessing
mac_qinq_ipv4_pay_src_ip = {
"name": "mac_qinq_ipv4_pay_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)'
@@ -27,12 +27,12 @@ mac_qinq_ipv4_pay_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv4_pay_dst_ip = {
"name": "mac_qinq_ipv4_pay_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)'
@@ -44,12 +44,12 @@ mac_qinq_ipv4_pay_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv4_pay_dest_mac = {
"name": "mac_qinq_ipv4_pay_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)'
@@ -60,7 +60,7 @@ mac_qinq_ipv4_pay_dest_mac = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv4_pay = [
@@ -71,7 +71,7 @@ mac_qinq_ipv4_pay = [
mac_qinq_ipv6_pay_src_ip = {
"name": "mac_qinq_ipv6_pay_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)'
@@ -83,12 +83,12 @@ mac_qinq_ipv6_pay_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv6_pay_dst_ip = {
"name": "mac_qinq_ipv6_pay_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)'
@@ -100,12 +100,12 @@ mac_qinq_ipv6_pay_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv6_pay_dest_mac = {
"name": "mac_qinq_ipv6_pay_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6()/("X"*480)'
@@ -116,7 +116,7 @@ mac_qinq_ipv6_pay_dest_mac = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv6_pay = [
@@ -128,7 +128,7 @@ mac_qinq_ipv6_pay = [
mac_qinq_pppoe_pay = [
{
"name": "mac_qinq_pppoe_pay",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/("X"*480)',
@@ -145,14 +145,14 @@ mac_qinq_pppoe_pay = [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
]
mac_qinq_pppoe_proto = [
{
"name": "mac_qinq_pppoe_proto",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/("X"*480)'
@@ -165,13 +165,13 @@ mac_qinq_pppoe_proto = [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
]
mac_qinq_pppoe_ipv4_src_ip = {
"name": "mac_qinq_pppoe_ipv4_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)'
@@ -184,12 +184,12 @@ mac_qinq_pppoe_ipv4_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv4_dst_ip = {
"name": "mac_qinq_pppoe_ipv4_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)'
@@ -202,12 +202,12 @@ mac_qinq_pppoe_ipv4_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv4_dest_mac = {
"name": "mac_qinq_pppoe_ipv4_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP()/UDP(dport=23)/("X"*480)'
@@ -220,7 +220,7 @@ mac_qinq_pppoe_ipv4_dest_mac = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP()/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv4 = [
@@ -231,7 +231,7 @@ mac_qinq_pppoe_ipv4 = [
mac_qinq_pppoe_ipv6_src_ip = {
"name": "mac_qinq_pppoe_ipv6_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)'
@@ -244,12 +244,12 @@ mac_qinq_pppoe_ipv6_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv6_dst_ip = {
"name": "mac_qinq_pppoe_ipv6_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)'
@@ -262,12 +262,12 @@ mac_qinq_pppoe_ipv6_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv6_dest_mac = {
"name": "mac_qinq_pppoe_ipv6_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/UDP(dport=23)/("X"*480)'
@@ -280,7 +280,7 @@ mac_qinq_pppoe_ipv6_dest_mac = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv6 = [
@@ -292,7 +292,7 @@ mac_qinq_pppoe_ipv6 = [
# Non-pipeline mode
tv_mac_qinq_ipv4 = {
"name": "tv_mac_qinq_ipv4",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)'
@@ -304,12 +304,12 @@ tv_mac_qinq_ipv4 = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3", dst="192.168.1.2")/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv6 = {
"name": "tv_mac_qinq_ipv6",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)'
@@ -321,12 +321,12 @@ tv_mac_qinq_ipv6 = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv4_udp = {
"name": "tv_mac_qinq_ipv4_udp",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)'
@@ -338,12 +338,12 @@ tv_mac_qinq_ipv4_udp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv4_tcp = {
"name": "tv_mac_qinq_ipv4_tcp",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)'
@@ -355,7 +355,7 @@ tv_mac_qinq_ipv4_tcp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tvs_mac_l4_qinq_dcf_non_pipeline_mode = [
@@ -368,7 +368,7 @@ tvs_mac_l4_qinq_dcf_non_pipeline_mode = [
# Pipeline mode
tv_mac_qinq_ipv6_udp = {
"name": "tv_mac_qinq_ipv6_udp",
- "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)'
@@ -380,12 +380,12 @@ tv_mac_qinq_ipv6_udp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv6_tcp = {
"name": "tv_mac_qinq_ipv6_tcp",
- "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)'
@@ -397,7 +397,7 @@ tv_mac_qinq_ipv6_tcp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tvs_mac_l4_qinq_dcf_pipeline_mode = [tv_mac_qinq_ipv6_udp, tv_mac_qinq_ipv6_tcp]
@@ -723,7 +723,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_IPV4_PAY
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_ipv4_pay)
def test_mac_qinq_ipv6_pay(self):
@@ -731,7 +731,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_IPV6_PAY
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_ipv6_pay)
@skip_unsupported_pkg("os default")
@@ -740,7 +740,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_PAY
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_pay)
@skip_unsupported_pkg("os default")
@@ -749,7 +749,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_PAY_Proto
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_proto)
@skip_unsupported_pkg("os default")
@@ -758,7 +758,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_IPV4
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv4)
@skip_unsupported_pkg("os default")
@@ -767,7 +767,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_IPV6
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv6)
def test_mac_l4_qinq_dcf_non_pipeline_mode(self):
@@ -775,7 +775,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_L4_QINQ
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_non_pipeline_mode)
def test_mac_l4_qinq_dcf_pipeline_mode(self):
@@ -783,7 +783,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_L4_QINQ_IPV6
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_pipeline_mode)
def reset_vf(self):
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread