From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V1 1/2] test_plans/vm2vm_virtio_pmd_dsa_test_plan: modify the dmas parameter by DPDK changed
Date: Wed, 30 Nov 2022 14:45:56 +0800 [thread overview]
Message-ID: <20221130064556.1165754-1-weix.ling@intel.com> (raw)
Modify the dmas parameter by DPDK changed.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/vm2vm_virtio_pmd_dsa_test_plan.rst | 298 ++++++++----------
1 file changed, 127 insertions(+), 171 deletions(-)
diff --git a/test_plans/vm2vm_virtio_pmd_dsa_test_plan.rst b/test_plans/vm2vm_virtio_pmd_dsa_test_plan.rst
index afad2a1b..cc6ac7f3 100644
--- a/test_plans/vm2vm_virtio_pmd_dsa_test_plan.rst
+++ b/test_plans/vm2vm_virtio_pmd_dsa_test_plan.rst
@@ -1,36 +1,36 @@
.. SPDX-License-Identifier: BSD-3-Clause
Copyright(c) 2022 Intel Corporation
-=======================================================
-vm2vm vhost-user/virtio-pmd with dsa driver test plan
-=======================================================
+=====================================================
+vm2vm vhost-user/virtio-pmd with DSA driver test plan
+=====================================================
-This document provides the test plan for testing some basic functions with DSA driver(kernel IDXD driver and DPDK vfio-pci driver)
+This document provides the test plan for testing some basic functions with DSA driver(kernel IDXD driver and DPDK vfio-pci driver)
in vm2vm vhost-user/virtio-pmd topology environment.
1. vm2vm mergeable, non-mergebale path test with virtio 1.0 and virtio1.1 and check virtio-pmd tx chain packets in mergeable path.
2. dynamic change queue number.
-..Note:
-1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
-2.For split virtqueue virtio-net with multi-queues server mode test, better to use qemu version >= 5.2.0, dut to qemu(v4.2.0~v5.1.0) exist split ring multi-queues reconnection issue.
-3.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
-exceed IOMMU's max capability, better to use 1G guest hugepage.
-4.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
+.. note::
-For more about dpdk-testpmd sample, please refer to the DPDK docments:
-https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html
-For more about qemu, you can refer to the qemu doc: https://qemu-project.gitlab.io/qemu/system/invocation.html
+ 1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
+ 2.For split virtqueue virtio-net with multi-queues server mode test, better to use qemu version >= 5.2.0, dut to qemu(v4.2.0~v5.1.0) exist split ring multi-queues reconnection issue.
+ 3.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
+ exceed IOMMU's max capability, better to use 1G guest hugepage.
+ 4.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd. In this patch,
+ we enable asynchronous data path for vhostpmd. Asynchronous data path is enabled per tx/rx queue, and users need to specify
+ the DMA device used by the tx/rx queue. Each tx/rx queue only supports to use one DMA device (This is limited by the
+ implementation of vhostpmd), but one DMA device can be shared among multiple tx/rx queues of different vhost PMD ports.
Prerequisites
=============
Topology
--------
- Test flow: Virtio-pmd-->Vhost-user-->Testpmd-->Vhost-user-->Virtio-pmd
+ Test flow: Virtio-pmd-->Vhost-user-->Testpmd-->Vhost-user-->Virtio-pmd
Software
--------
- iperf
+ iperf
General set up
--------------
@@ -42,7 +42,7 @@ General set up
CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
ninja -C x86_64-native-linuxapp-gcc -j 110
-2. Get the DMA device ID of DUT, for example, 0000:6a:01.0 is DMA device ID::
+2. Get the PCI device of DUT, for example, 0000:6a:01.0 - 0000:f6:01.0 are DSA devices::
<dpdk dir># ./usertools/dpdk-devbind.py -s
@@ -64,8 +64,8 @@ Common steps
------------
1.Bind DSA devices to DPDK vfio-pci driver::
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DSA device id>
- For example, bind 2 DMA devices to vfio-pci driver:
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <dsa_pci>
+ For example, bind 2 DSA devices to vfio-pci driver:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0
.. note::
@@ -77,18 +77,18 @@ Common steps
2. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
- <dpdk dir># ./drivers/dma/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd <dsa_pci>
+ <dpdk dir># ./drivers/dma/dma/idxd/dpdk_idxd_cfg.py -q <wq_num> <dsa_idx>
.. note::
Better to reset WQ when need operate DSA devices that bound to idxd drvier:
- <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices>
+ <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <dsa_idx>
You can check it by 'ls /dev/dsa'
- numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
- numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8
+ dsa_idx: Index of DSA devices, where 0<=dsa_idx<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
+ wq_num: Number of workqueues per DSA endpoint, where 1<=wq_num<=8
- For example, bind 2 DMA devices to idxd driver and configure WQ:
+ For example, bind 2 DSA devices to idxd driver and configure WQ:
<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
@@ -96,24 +96,23 @@ Common steps
Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq1.0 wq1.1 wq1.2 wq1.3"
Test Case 1: VM2VM virtio-pmd split ring mergeable path dynamic queue size with dsa dpdk driver and server mode
------------------------------------------------------------------------------------------------------------------
-This case tests split ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
+---------------------------------------------------------------------------------------------------------------
+This case tests split ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
check that it can tx chain packets normally after dynamically changing queue number from vhost, reconnection has also been tested.
-1. Bind 2 dsa device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
+1. Bind 2 DSA device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;rxq0@0000:f1:01.0-q1;rxq1@0000:f1:01.0-q1;rxq2@0000:f1:01.0-q1;rxq3@0000:f1:01.0-q1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q2;txq1@0000:f1:01.0-q2;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q2;rxq0@0000:f1:01.0-q3;rxq1@0000:f1:01.0-q3;rxq2@0000:f1:01.0-q3;rxq3@0000:f1:01.0-q3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
2. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -122,9 +121,9 @@ check that it can tx chain packets normally after dynamically changing queue num
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -177,47 +176,28 @@ check that it can tx chain packets normally after dynamically changing queue num
testpmd>start tx_first 32
testpmd>show port stats all
-10. Check vhost testpmd RX/TX can work normally, packets can looped between two VMs and both 8 queues can RX/TX traffic.
+10. Check vhost testpmd RX/TX can work normally, packets can looped between two VMs and both 8 queues can RX/TX traffic.
11. Rerun step 6.
-12. Relaunch and start vhost side testpmd with 8 queues::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=8 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f1:01.0-q4,lcore4@0000:f1:01.0-q5,lcore5@0000:f1:01.0-q6,lcore5@0000:f1:01.0-q7]
- testpmd>start
-
-13. Send packets by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
-
- testpmd>stop
- testpmd>start tx_first 32
- testpmd>show port stats all
- testpmd>stop
-
-14. Rerun step 12-13 for 3 times.
-
Test Case 2: VM2VM virtio-pmd split ring non-mergeable path dynamic queue size with dsa dpdk driver and server mode
-----------------------------------------------------------------------------------------------------------------------
-This case tests split ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
+-------------------------------------------------------------------------------------------------------------------
+This case tests split ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
check that it can work normally after dynamically changing queue number at virtio-pmd side, reconnection has also been tested.
-1. Bind 2 dsa device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
+1. Bind 2 DSA device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q1;txq3@0000:f1:01.0-q1;rxq0@0000:f1:01.0-q2;rxq1@0000:f1:01.0-q2;rxq2@0000:f1:01.0-q3;rxq3@0000:f1:01.0-q3]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:f6:01.0-q0;txq1@0000:f6:01.0-q0;txq2@0000:f6:01.0-q1;txq3@0000:f6:01.0-q1;rxq0@0000:f6:01.0-q2;rxq1@0000:f6:01.0-q2;rxq2@0000:f6:01.0-q3;rxq3@0000:f6:01.0-q3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -226,9 +206,9 @@ check that it can work normally after dynamically changing queue number at virti
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -241,18 +221,18 @@ check that it can work normally after dynamically changing queue number at virti
modprobe vfio
modprobe vfio-pci
- echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiom mu_mode
./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
4. Launch testpmd in VM1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 4 queues (queue0 to queue3) have packets rx/tx::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>set txpkts 64,256,512
testpmd>start tx_first 32
@@ -287,24 +267,23 @@ check that it can work normally after dynamically changing queue number at virti
11. Stop testpmd in VM2, and check that 4 queues can RX/TX traffic.
Test Case 3: VM2VM virtio-pmd packed ring mergeable path dynamic queue size with dsa dpdk driver and server mode
------------------------------------------------------------------------------------------------------------------
+----------------------------------------------------------------------------------------------------------------
This case tests packed ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
check that it can tx chain packets normally after dynamically changing queue number.
-1. Bind 2 dsa device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
+1. Bind 2 DSA device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q1;rxq2@0000:f1:01.0-q2;rxq3@0000:f1:01.0-q3]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q1;rxq2@0000:f1:01.0-q2;rxq3@0000:f1:01.0-q3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
2. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -313,9 +292,9 @@ check that it can tx chain packets normally after dynamically changing queue num
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -348,9 +327,9 @@ check that it can tx chain packets normally after dynamically changing queue num
6. Quit VM2 and relaunch VM2 with split ring::
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -372,7 +351,7 @@ check that it can tx chain packets normally after dynamically changing queue num
testpmd>set fwd mac
testpmd>set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
testpmd>start tx_first 32
-
+
9. On host, Check imix packets can looped between two VMs and 4 queues all have packets rx/tx::
testpmd>show port stats all
@@ -403,24 +382,23 @@ check that it can tx chain packets normally after dynamically changing queue num
14. Rerun step 10.
Test Case 4: VM2VM virtio-pmd packed ring non-mergeable path dynamic queue size with dsa dpdk driver and server mode
------------------------------------------------------------------------------------------------------------------------
-This case tests packed ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
+--------------------------------------------------------------------------------------------------------------------
+This case tests packed ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa dpdk driver,
check that it can work normally after dynamically changing queue number at virtio-pmd side.
-1. Bind 2 dsa device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
+1. Bind 2 DSA device to vfio-pci, then launch the testpmd with 2 vhost ports below commands::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q1;rxq2@0000:f1:01.0-q2;rxq3@0000:f1:01.0-q3]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q1;rxq2@0000:f1:01.0-q2;rxq3@0000:f1:01.0-q3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -429,9 +407,9 @@ check that it can work normally after dynamically changing queue number at virti
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -449,13 +427,13 @@ check that it can work normally after dynamically changing queue number at virti
4. Launch testpmd in VM1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>set txpkts 64,256,512
testpmd>start tx_first 32
@@ -474,7 +452,7 @@ check that it can work normally after dynamically changing queue number at virti
testpmd>stop
testpmd>port stop all
testpmd>port config all rxq 4
- testpmd>port config all txq 4
+ te stpmd>port config all txq 4
testpmd>port start all
testpmd>start
@@ -489,11 +467,11 @@ check that it can work normally after dynamically changing queue number at virti
11. Stop testpmd in VM2, and check that 4 queues can RX/TX traffic.
Test Case 5: VM2VM virtio-pmd split ring mergeable path dynamic queue size with dsa kernel driver and server mode
--------------------------------------------------------------------------------------------------------------------
-This case tests split ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
+-----------------------------------------------------------------------------------------------------------------
+This case tests split ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
check that it can tx chain packets normally after dynamically changing queue number at vhost side, reconnection has also been tested.
-1. Bind 2 dsa device to idxd::
+1. Bind 2 DSA device to idxd::
ls /dev/dsa #check wq configure, reset if exist
./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
@@ -505,17 +483,16 @@ check that it can tx chain packets normally after dynamically changing queue num
2. Launch the testpmd with 2 vhost ports below commands::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq0.4,lcore4@wq0.5,lcore5@wq0.6,lcore5@wq0.7]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.0;txq3@wq0.0;rxq0@wq0.1;rxq1@wq0.1;rxq2@wq0.1;rxq3@wq0.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@wq0.1;txq1@wq0.1;txq2@wq0.1;txq3@wq0.1;rxq0@wq0.0;rxq1@wq0.0;rxq2@wq0.0;rxq3@wq0.0]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
3. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -524,9 +501,9 @@ check that it can tx chain packets normally after dynamically changing queue num
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -560,7 +537,7 @@ check that it can tx chain packets normally after dynamically changing queue num
perf top
-8. Stop vhost, check that both 4 queues can rx/tx queues.
+8. Stop vhost, check that both 4 queues can rx/tx queues.
9. On host, dynamic change queue numbers::
@@ -581,30 +558,12 @@ check that it can tx chain packets normally after dynamically changing queue num
12. Rerun step 7.
-13. Relaunch and start vhost side testpmd with 8 queues::
-
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq1.0,lcore4@wq1.1,lcore5@wq1.2,lcore5@wq1.3]
- testpmd>start
-
-14. Send packets by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
-
- testpmd>stop
- testpmd>start tx_first 32
- testpmd>show port stats all
- testpmd>stop
-
-15. Rerun step 13-14 for 3 times.
-
Test Case 6: VM2VM virtio-pmd split ring non-mergeable path dynamic queue size with dsa kernel driver and server mode
------------------------------------------------------------------------------------------------------------------------
-This case tests split ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
+---------------------------------------------------------------------------------------------------------------------
+This case tests split ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
check that it can work normally after dynamically changing queue number at virtio-pmd side, reconnection has also been tested.
-1. Bind 2 dsa device to idxd::
+1. Bind 2 DSA device to idxd::
ls /dev/dsa #check wq configure, reset if exist
./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
@@ -616,17 +575,16 @@ check that it can work normally after dynamically changing queue number at virti
2. Launch the testpmd with 2 vhost ports below commands::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq0.4,lcore4@wq0.5,lcore5@wq0.6,lcore5@wq0.7]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.0;txq3@wq0.0;txq4@wq0.1;txq5@wq0.1;rxq2@wq1.0;rxq3@wq1.0;rxq4@wq1.1;rxq5@wq1.1;rxq6@wq1.1;rxq7@wq1.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.0;txq3@wq0.0;txq4@wq0.1;txq5@wq0.1;rxq2@wq1.0;rxq3@wq1.0;rxq4@wq1.1;rxq5@wq1.1;rxq6@wq1.1;rxq7@wq1.1]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
3. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -635,9 +593,9 @@ check that it can work normally after dynamically changing queue number at virti
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -655,13 +613,13 @@ check that it can work normally after dynamically changing queue number at virti
5. Launch testpmd in VM1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
6. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 4 queues (queue0 to queue3) have packets rx/tx::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>set txpkts 64,256,512
testpmd>start tx_first 32
@@ -693,32 +651,31 @@ check that it can work normally after dynamically changing queue number at virti
11. Stop testpmd in host, and check that 4 queues can RX/TX traffic.
Test Case 7: VM2VM virtio-pmd packed ring mergeable path dynamic queue size with dsa kernel driver and server mode
--------------------------------------------------------------------------------------------------------------------
-This case tests packed ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
+------------------------------------------------------------------------------------------------------------------
+This case tests packed ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
check that it can tx chain packets normally after dynamically changing queue number.
-1. Bind 1 dsa device to idxd::
+1. Bind 1 DSA device to idxd::
ls /dev/dsa #check wq configure, reset if exist
./usertools/dpdk-devbind.py -u 6a:01.0
./usertools/dpdk-devbind.py -b idxd 6a:01.0
- ./drivers/raw/ioat/dpdk_idxd_cfg.py -q 8 0
+ ./drivers/raw/ioat/dpdk_idxd_cfg.py -q 4 0
ls /dev/dsa #check wq configure success
2. Launch the testpmd with 2 vhost ports below commands::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq0.4,lcore4@wq0.5,lcore5@wq0.6,lcore5@wq0.7]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.1;txq2@wq0.2;txq3@wq0.3;rxq0@wq0.0;rxq1@wq0.1;rxq2@wq0.2;rxq3@wq0.3]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.1;txq2@wq0.2;txq3@wq0.3;rxq0@wq0.0;rxq1@wq0.1;rxq2@wq0.2;rxq3@wq0.3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd>start
3. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -727,9 +684,9 @@ check that it can tx chain packets normally after dynamically changing queue num
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -762,9 +719,9 @@ check that it can tx chain packets normally after dynamically changing queue num
7. Quit VM2 and relaunch VM2 with split ring::
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -816,33 +773,32 @@ check that it can tx chain packets normally after dynamically changing queue num
15. Rerun step 10.
Test Case 8: VM2VM virtio-pmd packed ring non-mergeable path dynamic queue size with dsa kernel driver and server mode
-------------------------------------------------------------------------------------------------------------------------
-This case tests packed ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
+----------------------------------------------------------------------------------------------------------------------
+This case tests packed ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with dsa kernel driver,
check that it can work normally after dynamically changing queue number at virtio-pmd side.
-1. Bind 2 dsa device to idxd::
+1. Bind 2 DSA device to idxd::
ls /dev/dsa #check wq configure, reset if exist
./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
- ./drivers/raw/ioat/dpdk_idxd_cfg.py -q 8 0
- ./drivers/raw/ioat/dpdk_idxd_cfg.py -q 8 1
+ ./drivers/raw/ioat/dpdk_idxd_cfg.py -q 4 0
+ ./drivers/raw/ioat/dpdk_idxd_cfg.py -q 4 1
ls /dev/dsa #check wq configure success
1. Launch the testpmd with 2 vhost ports below commands::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq1.0,lcore4@wq1.1,lcore5@wq1.2,lcore5@wq1.3]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.0;txq3@wq0.0;txq4@wq0.1;txq5@wq0.1;rxq2@wq1.0;rxq3@wq1.0;rxq4@wq1.1;rxq5@wq1.1;rxq6@wq1.1;rxq7@wq1.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@wq0.2;txq1@wq0.2;txq2@wq0.2;txq3@wq0.2;txq4@wq0.3;txq5@wq0.3;rxq2@wq1.2;rxq3@wq1.2;rxq4@wq1.3;rxq5@wq1.3;rxq6@wq1.3;rxq7@wq1.3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu::
- taskset -c 6-16 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 6-16 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04.img \
-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -851,9 +807,9 @@ check that it can work normally after dynamically changing queue number at virti
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- taskset -c 17-27 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ taskset -c 17-27 /usr/local/qemu-7.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu22-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -871,13 +827,13 @@ check that it can work normally after dynamically changing queue number at virti
4. Launch testpmd in VM1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>set txpkts 64,256,512
testpmd>start tx_first 32
@@ -918,7 +874,7 @@ check that it can work normally after dynamically changing queue number at virti
testpmd>port config all txq 8
testpmd>port start all
testpmd>start
-
+
13. Send packets by testpmd in VM2, check Check virtio-pmd RX/TX can work normally and imix packets can looped between two VMs for 1 mins::
testpmd>stop
@@ -927,4 +883,4 @@ check that it can work normally after dynamically changing queue number at virti
14. Rerun step 6.
-15. Stop testpmd in VM2, and check that 8 queues can RX/TX traffic.
+15. Stop testpmd in VM2, and check that 8 queues can RX/TX traffic.
\ No newline at end of file
--
2.25.1
reply other threads:[~2022-11-30 6:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221130064556.1165754-1-weix.ling@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).