From: Lingli Chen <linglix.chen@intel.com>
To: dts@dpdk.org
Cc: zhiminx.huang@intel.com, Lingli Chen <linglix.chen@intel.com>
Subject: [dts][PATCH V1 1/8] test_plans/ddp_gtp_qregion: remove --pkt-filter-mode sync dpdk change
Date: Thu, 15 Dec 2022 01:41:57 -0500 [thread overview]
Message-ID: <20221215064204.30802-1-linglix.chen@intel.com> (raw)
According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration) remove flow_director_filter raw pkt test case.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/ddp_gtp_qregion_test_plan.rst | 420 +----------------------
1 file changed, 2 insertions(+), 418 deletions(-)
diff --git a/test_plans/ddp_gtp_qregion_test_plan.rst b/test_plans/ddp_gtp_qregion_test_plan.rst
index bc3b9b68..ba928386 100644
--- a/test_plans/ddp_gtp_qregion_test_plan.rst
+++ b/test_plans/ddp_gtp_qregion_test_plan.rst
@@ -53,12 +53,9 @@ Prerequisites
./tools/dpdk-devbind.py -b igb_uio 81:00.0
2. Start testpmd on host, set chained port topology mode, add txq/rxq to
- enable multi-queues. If test PF flow director, need to add
- --pkt-filter-mode=perfect on testpmd to enable flow director. In general,
- PF's max queue is 64::
+ enable multi-queues. In general, PF's max queue is 64::
- ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect
- --port-topology=chained --txq=64 --rxq=64
+ ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
Load/delete dynamic device personalization
@@ -668,419 +665,6 @@ Test Case: Inner IPv6 dst controls GTP-U IPv6 queue in queue region
IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/UDP()/Raw('x'*20)
-
-Test Case: Flow director for GTP IPv4 with default fd input set
-===============================================================
-1. Check flow type to pctype mapping::
-
- testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item::
-
- testpmd> port config 0 pctype mapping update 22 26
-
-3. Default flow director input set is teid, start testpmd, set fwd rxonly,
- enable output print
-
-4. Send GTP IPv4 packets, check to receive packet from queue 0::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-5. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination
- address and port should be swapped in the template and traffic packets::
-
- a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(dst="1.1.1.1",
- src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
- queue between 1~63, such as 36::
-
- testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36
- fd_id 1 packet test_gtp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
- configured queue 36::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-10. Send non-matched inner src IPv4/dst IPv4/sport/dport packets, check to
- receive packets from queue 36::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.2",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
- dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20)
-
-11. Send non-matched teid GTP IPv4 packets, check to receive packet from
- queue 0::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xff)/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv4 according to inner dst IPv4
-=================================================================
-1. Check flow type to pctype mapping::
-
- testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item::
-
- testpmd> port config 0 pctype mapping update 22 26
-
-3. Reset GTP IPv4 flow director configure::
-
- testpmd> port config 0 pctype 22 fdir_inset clear all
-
-4. Inner dst IPv4 words are 27 and 28, enable flow director input set for
- them::
-
- testpmd> port config 0 pctype 22 fdir_inset set field 27
- testpmd> port config 0 pctype 22 fdir_inset set field 28
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv4 packets, check to receive packet from queue 0::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination
- address and port should be swapped in the template and traffic packets::
-
- a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(dst="1.1.1.1",
- src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random
- queue between 1~63, such as 36::
-
- testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36
- fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
- configured queue 36::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-10. Send non-matched inner src IPv4/sport/dport packets, check to receive
- packets from queue 36::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.2",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20)
-
-11. Send non-matched inner dst IPv4 packets, check to receive packet from
- queue 0::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv4 according to inner src IPv4
-=================================================================
-1. Check flow ptype to pctype mapping::
-
- testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item::
-
- testpmd> port config 0 pctype mapping update 22 26
-
-3. Reset GTP IPv4 flow director configure::
-
- testpmd> port config 0 pctype 22 fdir_inset clear all
-
-4. Inner src IPv4 words are 15 and 16, enable flow director input set for
- them::
-
- testpmd> port config 0 pctype 22 fdir_inset set field 15
- testpmd> port config 0 pctype 22 fdir_inset set field 16
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv4 packets, check to receive packet from queue 0::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination
- address and port should be swapped in the template and traffic packets::
-
- a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(dst="1.1.1.1",
- src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random
- queue between 1~63, such as 36::
-
- testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36
- fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
- configured queue 36::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-10. Send non-matched inner dst IPv4/sport/dport packets, check to receive
- packets from queue 36::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20)
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
- dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20)
-
-11. Send non-matched inner src IPv4 packets, check to receive packet
- from queue 0::
-
- p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.2",
- dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv6 with default fd input set
-===============================================================
-1. Check flow type to pctype mapping::
-
- testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item::
-
- testpmd> port config 0 pctype mapping update 23 23
-
-3. Default flow director input set is teid, start testpmd, set fwd rxonly,
- enable output print
-
-4. Send GTP IPv6 packets, check to receive packet from queue 0::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-5. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination
- address and port should be swapped in the template and traffic packets::
-
- a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(dport=40,sport=50)/Raw('x'*20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
- queue between 1~63, such as 36::
-
- testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
- fd_id 1 packet test_gtp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
- configured queue 36::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-8. Send non-matched inner src IPv6/dst IPv6/sport/dport packets, check to
- receive packets from queue 36::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
- UDP(sport=40,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=41,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=51)/Raw('x'*20)
-
-11. Send non-matched teid packets, check to receive packet
- from queue 0::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xff)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv6 according to inner dst IPv6
-=================================================================
-1. Check flow type to pctype mapping::
-
- testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item::
-
- testpmd> port config 0 pctype mapping update 23 23
-
-3. Reset GTP IPv6 flow director configure::
-
- testpmd> port config 0 pctype 23 fdir_inset clear all
-
-4. Inner dst IPv6 words are 21~28 , enable flow director input set for them::
-
- testpmd> port config 0 pctype 23 fdir_inset set field 21
- testpmd> port config 0 pctype 23 fdir_inset set field 22
- testpmd> port config 0 pctype 23 fdir_inset set field 23
- testpmd> port config 0 pctype 23 fdir_inset set field 24
- testpmd> port config 0 pctype 23 fdir_inset set field 25
- testpmd> port config 0 pctype 23 fdir_inset set field 26
- testpmd> port config 0 pctype 23 fdir_inset set field 27
- testpmd> port config 0 pctype 23 fdir_inset set field 28
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv6 packets, check to receive packet from queue 0::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination
- address and port should be swapped in the template and traffic packets::
-
- a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(dport=40,sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random
- queue between 1~63, such as 36::
-
- testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
- fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
- configured queue 36::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-10. Send non-matched inner src IPv6/sport/dport packets, check to receive
- packets from queue 36::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=41,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=51)/Raw('x'*20)
-
-11. Send non-matched inner dst IPv6 packets, check to receive packet
- from queue 0::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv6 according to inner src IPv6
-=================================================================
-1. Check flow type to pctype mapping::
-
- testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item::
-
- testpmd> port config 0 pctype mapping update 23 23
-
-3. Reset GTP IPv6 flow director configure::
-
- testpmd> port config 0 pctype 23 fdir_inset clear all
-
-4. Inner src IPv6 words are 13~20, enable flow director input set for them::
-
- testpmd> port config 0 pctype 23 fdir_inset set field 13
- testpmd> port config 0 pctype 23 fdir_inset set field 14
- testpmd> port config 0 pctype 23 fdir_inset set field 15
- testpmd> port config 0 pctype 23 fdir_inset set field 16
- testpmd> port config 0 pctype 23 fdir_inset set field 17
- testpmd> port config 0 pctype 23 fdir_inset set field 18
- testpmd> port config 0 pctype 23 fdir_inset set field 19
- testpmd> port config 0 pctype 23 fdir_inset set field 20
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv6 packets, check to receive packet from queue 0::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination
- address and port should be swapped in the template and traffic packets::
-
- a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(dport=40,sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random
- queue between 1~63, such as 36::
-
- testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
- fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
- configured queue 36::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-10. Send non-matched inner dst IPv6/sport/dport packets, check to receive
- packets from queue 36::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
- UDP(sport=40,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=41,dport=50)/Raw('x'*20)
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=51)/Raw('x'*20)
-
-11. Send non-matched inner src IPv6 packets, check to receive packet from
- queue 0::
-
- p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
- IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
- dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
- UDP(sport=40,dport=50)/Raw('x'*20)
-
-
Test Case: Outer 64 bit prefix dst controls GTP-C queue
=======================================================
1. Check flow type to pctype mapping::
--
2.17.1
next reply other threads:[~2022-12-15 7:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 6:41 Lingli Chen [this message]
2022-12-15 6:41 ` [dts][PATCH V1 2/8] tests/ddp_gtp_qregion: " Lingli Chen
2022-12-15 6:41 ` [dts][PATCH V1 3/8] test_plans/ddp_l2tpv3: " Lingli Chen
2022-12-15 6:42 ` [dts][PATCH V1 4/8] tests/ddp_l2tpv3: " Lingli Chen
2022-12-15 6:42 ` [dts][PATCH V1 5/8] test_plans/ddp_ppp_l2tp: " Lingli Chen
2022-12-15 6:42 ` [dts][PATCH V1 6/8] tests/ddp_ppp_l2tp: " Lingli Chen
2022-12-22 12:00 ` lijuan.tu
2022-12-15 6:42 ` [dts][PATCH V1 7/8] test_plans/rss_to_rte_flow: " Lingli Chen
2022-12-15 6:42 ` [dts][PATCH V1 8/8] tests/rss_to_rte_flow: " Lingli Chen
2022-12-22 8:33 ` Li, WeiyuanX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221215064204.30802-1-linglix.chen@intel.com \
--to=linglix.chen@intel.com \
--cc=dts@dpdk.org \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).