From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 77248A0547; Thu, 15 Dec 2022 08:39:53 +0100 (CET) Received: from mails.dpdk.org (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id AD82142D1F; Thu, 15 Dec 2022 08:39:52 +0100 (CET) Received: from mga01.intel.com (mga01.intel.com [192.55.52.88]) by mails.dpdk.org (Postfix) with ESMTP id 47E7640A8A for ; Thu, 15 Dec 2022 08:39:51 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1671089991; x=1702625991; h=from:to:cc:subject:date:message-id; bh=7s78zbpwzlQmRuO/BBKeOIcI5WrHmGni8VnKtXwWNY4=; b=lL+xIz8SV9fYqAWWHBBQxXUOq6f0eE8RYvEYIEJCzIPzg1P68Wy5ILDW W2V9Bnr0w1h0UqQWeo+zdlUXS4sGNC4FWwUhPECfXjyVHiMh1E8EDam8f /1xT5aX0JNVaHn3LRZgPyPwWwKDAG05jE1Tdg4ILWAmuc41gxQnmmU5oe TrmpFU33VX5YTYNAAUnyWwc+GZFPya+Z1cAuhxCGSC7Bgk9JdmX2oR1s3 Na5zyiyus1ujF/XSvL8rrI7tfKSZNjn/C1WzZx7n76uKjpsDttF5bqJch uffq3aTUMFsaakj00DVEPmzq1wsKdlHOhBA/WsMUiuaw6ehvNGCNmf23n g==; X-IronPort-AV: E=McAfee;i="6500,9779,10561"; a="345697259" X-IronPort-AV: E=Sophos;i="5.96,246,1665471600"; d="scan'208";a="345697259" Received: from fmsmga007.fm.intel.com ([10.253.24.52]) by fmsmga101.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Dec 2022 23:39:49 -0800 X-IronPort-AV: E=McAfee;i="6500,9779,10561"; a="651448133" X-IronPort-AV: E=Sophos;i="5.96,246,1665471600"; d="scan'208";a="651448133" Received: from unknown (HELO localhost.localdomain) ([10.239.252.99]) by fmsmga007-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Dec 2022 23:39:16 -0800 From: Lingli Chen To: dts@dpdk.org Cc: zhiminx.huang@intel.com, Lingli Chen Subject: [dts][PATCH V1 1/8] test_plans/ddp_gtp_qregion: remove --pkt-filter-mode sync dpdk change Date: Thu, 15 Dec 2022 01:41:57 -0500 Message-Id: <20221215064204.30802-1-linglix.chen@intel.com> X-Mailer: git-send-email 2.17.1 X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration) remove flow_director_filter raw pkt test case. Signed-off-by: Lingli Chen --- test_plans/ddp_gtp_qregion_test_plan.rst | 420 +---------------------- 1 file changed, 2 insertions(+), 418 deletions(-) diff --git a/test_plans/ddp_gtp_qregion_test_plan.rst b/test_plans/ddp_gtp_qregion_test_plan.rst index bc3b9b68..ba928386 100644 --- a/test_plans/ddp_gtp_qregion_test_plan.rst +++ b/test_plans/ddp_gtp_qregion_test_plan.rst @@ -53,12 +53,9 @@ Prerequisites ./tools/dpdk-devbind.py -b igb_uio 81:00.0 2. Start testpmd on host, set chained port topology mode, add txq/rxq to - enable multi-queues. If test PF flow director, need to add - --pkt-filter-mode=perfect on testpmd to enable flow director. In general, - PF's max queue is 64:: + enable multi-queues. In general, PF's max queue is 64:: - .//app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect - --port-topology=chained --txq=64 --rxq=64 + .//app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64 Load/delete dynamic device personalization @@ -668,419 +665,6 @@ Test Case: Inner IPv6 dst controls GTP-U IPv6 queue in queue region IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002", dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/UDP()/Raw('x'*20) - -Test Case: Flow director for GTP IPv4 with default fd input set -=============================================================== -1. Check flow type to pctype mapping:: - - testpmd> show port 0 pctype mapping - -2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item:: - - testpmd> port config 0 pctype mapping update 22 26 - -3. Default flow director input set is teid, start testpmd, set fwd rxonly, - enable output print - -4. Send GTP IPv4 packets, check to receive packet from queue 0:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - -5. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination - address and port should be swapped in the template and traffic packets:: - - a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(dst="1.1.1.1", - src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20) - -6. Setup raw flow type filter for flow director, configured queue is random - queue between 1~63, such as 36:: - - testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36 - fd_id 1 packet test_gtp.raw - -7. Send matched swapped traffic packet, check to receive packet from - configured queue 36:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - -10. Send non-matched inner src IPv4/dst IPv4/sport/dport packets, check to - receive packets from queue 36:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.2", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1", - dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20) - -11. Send non-matched teid GTP IPv4 packets, check to receive packet from - queue 0:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xff)/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - - -Test Case: Flow director for GTP IPv4 according to inner dst IPv4 -================================================================= -1. Check flow type to pctype mapping:: - - testpmd> show port 0 pctype mapping - -2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item:: - - testpmd> port config 0 pctype mapping update 22 26 - -3. Reset GTP IPv4 flow director configure:: - - testpmd> port config 0 pctype 22 fdir_inset clear all - -4. Inner dst IPv4 words are 27 and 28, enable flow director input set for - them:: - - testpmd> port config 0 pctype 22 fdir_inset set field 27 - testpmd> port config 0 pctype 22 fdir_inset set field 28 - -5. Start testpmd, set fwd rxonly, enable output print - -6. Send GTP IPv4 packets, check to receive packet from queue 0:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - -7. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination - address and port should be swapped in the template and traffic packets:: - - a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(dst="1.1.1.1", - src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20) - -8. Setup raw flow type filter for flow director, configured queue is random - queue between 1~63, such as 36:: - - testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36 - fd_id 1 packet test_gtp.raw - -9. Send matched swapped traffic packet, check to receive packet from - configured queue 36:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - -10. Send non-matched inner src IPv4/sport/dport packets, check to receive - packets from queue 36:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.2", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20) - -11. Send non-matched inner dst IPv4 packets, check to receive packet from - queue 0:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20) - - -Test Case: Flow director for GTP IPv4 according to inner src IPv4 -================================================================= -1. Check flow ptype to pctype mapping:: - - testpmd> show port 0 pctype mapping - -2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item:: - - testpmd> port config 0 pctype mapping update 22 26 - -3. Reset GTP IPv4 flow director configure:: - - testpmd> port config 0 pctype 22 fdir_inset clear all - -4. Inner src IPv4 words are 15 and 16, enable flow director input set for - them:: - - testpmd> port config 0 pctype 22 fdir_inset set field 15 - testpmd> port config 0 pctype 22 fdir_inset set field 16 - -5. Start testpmd, set fwd rxonly, enable output print - -6. Send GTP IPv4 packets, check to receive packet from queue 0:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - -7. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination - address and port should be swapped in the template and traffic packets:: - - a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(dst="1.1.1.1", - src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20) - -8. Setup raw flow type filter for flow director, configured queue is random - queue between 1~63, such as 36:: - - testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36 - fd_id 1 packet test_gtp.raw - -9. Send matched swapped traffic packet, check to receive packet from - configured queue 36:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - -10. Send non-matched inner dst IPv4/sport/dport packets, check to receive - packets from queue 36:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20) - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1", - dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20) - -11. Send non-matched inner src IPv4 packets, check to receive packet - from queue 0:: - - p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.2", - dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20) - - -Test Case: Flow director for GTP IPv6 with default fd input set -=============================================================== -1. Check flow type to pctype mapping:: - - testpmd> show port 0 pctype mapping - -2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item:: - - testpmd> port config 0 pctype mapping update 23 23 - -3. Default flow director input set is teid, start testpmd, set fwd rxonly, - enable output print - -4. Send GTP IPv6 packets, check to receive packet from queue 0:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - -5. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination - address and port should be swapped in the template and traffic packets:: - - a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(dport=40,sport=50)/Raw('x'*20) - -6. Setup raw flow type filter for flow director, configured queue is random - queue between 1~63, such as 36:: - - testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36 - fd_id 1 packet test_gtp.raw - -7. Send matched swapped traffic packet, check to receive packet from - configured queue 36:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - -8. Send non-matched inner src IPv6/dst IPv6/sport/dport packets, check to - receive packets from queue 36:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/ - UDP(sport=40,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=41,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=51)/Raw('x'*20) - -11. Send non-matched teid packets, check to receive packet - from queue 0:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xff)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - - -Test Case: Flow director for GTP IPv6 according to inner dst IPv6 -================================================================= -1. Check flow type to pctype mapping:: - - testpmd> show port 0 pctype mapping - -2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item:: - - testpmd> port config 0 pctype mapping update 23 23 - -3. Reset GTP IPv6 flow director configure:: - - testpmd> port config 0 pctype 23 fdir_inset clear all - -4. Inner dst IPv6 words are 21~28 , enable flow director input set for them:: - - testpmd> port config 0 pctype 23 fdir_inset set field 21 - testpmd> port config 0 pctype 23 fdir_inset set field 22 - testpmd> port config 0 pctype 23 fdir_inset set field 23 - testpmd> port config 0 pctype 23 fdir_inset set field 24 - testpmd> port config 0 pctype 23 fdir_inset set field 25 - testpmd> port config 0 pctype 23 fdir_inset set field 26 - testpmd> port config 0 pctype 23 fdir_inset set field 27 - testpmd> port config 0 pctype 23 fdir_inset set field 28 - -5. Start testpmd, set fwd rxonly, enable output print - -6. Send GTP IPv6 packets, check to receive packet from queue 0:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - -7. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination - address and port should be swapped in the template and traffic packets:: - - a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(dport=40,sport=50)/Raw('x'*20) - -8. Setup raw flow type filter for flow director, configured queue is random - queue between 1~63, such as 36:: - - testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36 - fd_id 1 packet test_gtp.raw - -9. Send matched swapped traffic packet, check to receive packet from - configured queue 36:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - -10. Send non-matched inner src IPv6/sport/dport packets, check to receive - packets from queue 36:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=41,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=51)/Raw('x'*20) - -11. Send non-matched inner dst IPv6 packets, check to receive packet - from queue 0:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/ - UDP(sport=40,dport=50)/Raw('x'*20) - - -Test Case: Flow director for GTP IPv6 according to inner src IPv6 -================================================================= -1. Check flow type to pctype mapping:: - - testpmd> show port 0 pctype mapping - -2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item:: - - testpmd> port config 0 pctype mapping update 23 23 - -3. Reset GTP IPv6 flow director configure:: - - testpmd> port config 0 pctype 23 fdir_inset clear all - -4. Inner src IPv6 words are 13~20, enable flow director input set for them:: - - testpmd> port config 0 pctype 23 fdir_inset set field 13 - testpmd> port config 0 pctype 23 fdir_inset set field 14 - testpmd> port config 0 pctype 23 fdir_inset set field 15 - testpmd> port config 0 pctype 23 fdir_inset set field 16 - testpmd> port config 0 pctype 23 fdir_inset set field 17 - testpmd> port config 0 pctype 23 fdir_inset set field 18 - testpmd> port config 0 pctype 23 fdir_inset set field 19 - testpmd> port config 0 pctype 23 fdir_inset set field 20 - -5. Start testpmd, set fwd rxonly, enable output print - -6. Send GTP IPv6 packets, check to receive packet from queue 0:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - -7. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination - address and port should be swapped in the template and traffic packets:: - - a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(dport=40,sport=50)/Raw('x'*20) - -8. Setup raw flow type filter for flow director, configured queue is random - queue between 1~63, such as 36:: - - testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36 - fd_id 1 packet test_gtp.raw - -9. Send matched swapped traffic packet, check to receive packet from - configured queue 36:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - -10. Send non-matched inner dst IPv6/sport/dport packets, check to receive - packets from queue 36:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/ - UDP(sport=40,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=41,dport=50)/Raw('x'*20) - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=51)/Raw('x'*20) - -11. Send non-matched inner src IPv6 packets, check to receive packet from - queue 0:: - - p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/ - IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002", - dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/ - UDP(sport=40,dport=50)/Raw('x'*20) - - Test Case: Outer 64 bit prefix dst controls GTP-C queue ======================================================= 1. Check flow type to pctype mapping:: -- 2.17.1