From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id AE13CA00C2; Thu, 5 Jan 2023 03:43:17 +0100 (CET) Received: from mails.dpdk.org (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id A326942D1A; Thu, 5 Jan 2023 03:43:17 +0100 (CET) Received: from mga05.intel.com (mga05.intel.com [192.55.52.43]) by mails.dpdk.org (Postfix) with ESMTP id 1140842D1A for ; Thu, 5 Jan 2023 03:43:14 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1672886595; x=1704422595; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=HQk36jattVjufMn59+Tkk73hxnbMQuvyYog4O1SjayU=; b=kMJNHh5OKj4vYRFgnZryiHnhkbMOaQCyN5vIXqedVLzbelXqvX0r5zpB s2Y9vS+feqAqByw8TmwBoqI41LoYHKhwV0hhXlEQ4LwimxObzpOg+4ctN UknAExPel3IVIGkLY+AX5lB+iZjFXv4yitXiymedTdQQUP0G2M32KAIQW vm+NYXSatr1VYWJSeIzQbABqci3u1QymxbAfELowIioJyru0JH039pWzs dfjSAhmy5CnvIOET82M5X8iYDClUbAHhipacdSmI68xxjWzzxCWXcIhdv Y7Q1IXVJXo5u0Pp5GCC6UWfZ7cnxHP0Vz4pNqxjZeJTe1e2WbGNo7gXav Q==; X-IronPort-AV: E=McAfee;i="6500,9779,10580"; a="408351319" X-IronPort-AV: E=Sophos;i="5.96,301,1665471600"; d="scan'208";a="408351319" Received: from fmsmga008.fm.intel.com ([10.253.24.58]) by fmsmga105.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 04 Jan 2023 18:43:14 -0800 X-IronPort-AV: E=McAfee;i="6500,9779,10580"; a="718660535" X-IronPort-AV: E=Sophos;i="5.96,301,1665471600"; d="scan'208";a="718660535" Received: from unknown (HELO localhost.localdomain) ([10.239.252.20]) by fmsmga008-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 04 Jan 2023 18:43:12 -0800 From: Song Jiale To: dts@dpdk.org Cc: Song Jiale Subject: [dts] [PATCH V1 4/7] test_plans/vf_pmd_bonded_8023ad: add cases to test vf bonding Date: Thu, 5 Jan 2023 10:40:53 +0000 Message-Id: <20230105104056.234069-5-songx.jiale@intel.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230105104056.234069-1-songx.jiale@intel.com> References: <20230105104056.234069-1-songx.jiale@intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org add testplan to test vf bonding. Signed-off-by: Song Jiale --- test_plans/vf_pmd_bonded_8023ad_test_plan.rst | 411 ++++++++++++++++++ 1 file changed, 411 insertions(+) create mode 100644 test_plans/vf_pmd_bonded_8023ad_test_plan.rst diff --git a/test_plans/vf_pmd_bonded_8023ad_test_plan.rst b/test_plans/vf_pmd_bonded_8023ad_test_plan.rst new file mode 100644 index 00000000..14c5c110 --- /dev/null +++ b/test_plans/vf_pmd_bonded_8023ad_test_plan.rst @@ -0,0 +1,411 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 23.03 Intel Corporation + +================================= +Link Bonding for mode 4 (802.3ad) +================================= + +This test plan is mainly to test link bonding mode 4(802.3ad) function via +testpmd. + +link bonding mode 4 is IEEE 802.3ad Dynamic link aggregation. Creates +aggregation groups that share the same speed and duplex settings. Utilizes all +slaves in the active aggregator according to the 802.3ad specification. DPDK +realize it based on 802.1AX specification, it includes LACP protocol and Marker +protocol. This mode requires a switch that supports IEEE 802.3ad Dynamic link +aggregation. + +note: Slave selection for outgoing traffic is done according to the transmit +hash policy, which may be changed from the default simple XOR layer2 policy. + +Requirements +============ +#. Bonded ports shall maintain statistics similar to normal port. + +#. The slave links shall be monitor for link status change. See also the concept + of up/down time delay to handle situations such as a switch reboots, it is + possible that its ports report "link up" status before they become usable. + +#. Upon unbonding the bonding PMD driver must restore the MAC addresses that the + slaves had before they were enslaved. + +#. According to the bond type, when the bond interface is placed in promiscuous + mode it will propagate the setting to the slave devices. + +#. LACP control packet filtering offload. It is a idea of performance + improvement, which use hardware offloads to improve packet classification. + +#. support three 802.3ad aggregation selection logic modes (stable/bandwidth/ + count). The Selection Logic selects a compatible Aggregator for a port, using + the port LAG ID. The Selection Logic may determine that the link should be + operated as a standby link if there are constraints on the simultaneous + attachment of ports that have selected the same Aggregator. + +#. technical details refer to content attached in website:: + + http://dpdk.org/ml/archives/dev/2017-May/066143.html + +#. DPDK technical details refer to:: + + dpdk/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst: + ``Link Aggregation 802.3AD (Mode 4)`` + +#. linux technical document of 802.3ad as testing reference document:: + + https://www.kernel.org/doc/Documentation/networking/bonding.txt:``802.3ad`` + +Prerequisites for Bonding +========================= +all link ports of switch/dut should be the same data rate and support full-duplex. + +Functional testing hardware configuration +----------------------------------------- +NIC and DUT ports requirements: + +- Tester: 2 ports of nic +- DUT: 2 ports of nic + +create 1 vf for two dut ports:: + + echo 1 > /sys/bus/pci/devices/0000\:31\:00.0/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000\:31\:00.1/sriov_numvfs + +port topology diagram:: + + Tester DUT + .-------. .------------. + | port0 | <------------------> | port0(VF0) | + | port1 | <------------------> | port1(VF1) | + '-------' '------------' + +Test Case : basic behavior start/stop +===================================== +#. check bonded device stop/start action under frequency operation status + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> set bonding lacp dedicated_queues 2 enable + testpmd> set allmulti 0 on + testpmd> set allmulti 1 on + testpmd> set allmulti 2 on + testpmd> set portlist 2 + +#. loop execute this step 10 times, check if bonded device still work:: + + testpmd> port stop all + testpmd> port start all + testpmd> start + testpmd> show bonding config 2 + testpmd> stop + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior mac +============================== +#. bonded device's default mac is one of each slave's mac after one slave has been added. +#. when no slave attached, mac should be 00:00:00:00:00:00 +#. slave's mac restore the MAC addresses that the slave has before they were enslaved. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + +#. check bond device mac should be 00:00:00:00:00:00:: + + testpmd> show bonding config 2 + +#. add two slaves to bond port:: + + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> port start all + +#. check bond device mac should be one of each slave's mac:: + + testpmd> show bonding config 0 + testpmd> show bonding config 1 + testpmd> show bonding config 2 + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior link up/down +======================================= +#. bonded device should be down status without slaves. +#. bonded device device should have the same status of link status. +#. Active Slaves status should change with the slave status change. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> set bonding lacp dedicated_queues 2 enable + testpmd> set allmulti 0 on + testpmd> set allmulti 1 on + testpmd> set allmulti 2 on + testpmd> set portlist 2 + +#. stop bonded device and check bonded device/slaves link status:: + + testpmd> port stop 2 + testpmd> show bonding config 2 + testpmd> show bonding config 1 + testpmd> show bonding config 0 + +#. start bonded device and check bonded device/slaves link status:: + + testpmd> port start 2 + testpmd> show bonding config 2 + testpmd> show bonding config 1 + testpmd> show bonding config 0 + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior promiscuous mode +============================================ +#. bonded device promiscuous mode should be ``enabled`` by default. +#. bonded device/slave device should have the same status of promiscuous mode. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + +#. check if bonded device promiscuous mode is ``enabled``:: + + testpmd> show bonding config 2 + +#. add two slaves and check if promiscuous mode is ``enabled``:: + + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> show bonding config 0 + testpmd> show bonding config 1 + +#. disable bonded device promiscuous mode and check promiscuous mode:: + + testpmd> set promisc 2 off + testpmd> show bonding config 2 + +#. enable bonded device promiscuous mode and check promiscuous mode:: + + testpmd> set promisc 2 on + testpmd> show bonding config 2 + +#. check slaves' promiscuous mode:: + + testpmd> show bonding config 0 + testpmd> show bonding config 1 + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior agg mode +=================================== +#. stable is the default agg mode. +#. check 802.3ad aggregation mode configuration, support :: + ``count`` + ``stable`` + ``bandwidth`` + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> set bonding lacp dedicated_queues 2 enable + testpmd> set allmulti 0 on + testpmd> set allmulti 1 on + testpmd> set allmulti 2 on + testpmd> set portlist 2 + testpmd> port start all + testpmd> show bonding config 2 + testpmd> set bonding agg_mode 2 + +#. check if agg_mode set successful:: + + testpmd> show bonding config 2 + Bonding mode: 4 + IEEE802.3AD Aggregator Mode: + Slaves (2): [0 1] + Active Slaves (2): [0 1] + Primary: [0] + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior dedicated queues +=========================================== +#. check 802.3ad dedicated queues is ``disable`` by default +#. check 802.3ad set dedicated queues, support :: + ``disable`` + ``enable`` + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> show bonding config 2 + +#. check if dedicated_queues disable successful:: + + testpmd> set bonding lacp dedicated_queues 2 disable + +#. check if bonded port can start:: + + testpmd> port start all + testpmd> start + +#. check if dedicated_queues enable successful:: + + testpmd> stop + testpmd> port stop all + testpmd> set bonding lacp dedicated_queues 2 enable + +#. check if bonded port can start:: + + testpmd> port start all + testpmd> start + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : command line option +=============================== +#. check command line option:: + + slave=<0000:xx:00.0> + agg_mode= + +#. compare bonding configuration with expected configuration. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=vfio-pci + +#. boot up testpmd :: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 \ + --vdev 'net_bonding0,slave=0000:xx:00.0,slave=0000:xx:00.1,mode=4,agg_mode=' \ + -- -i --port-topology=chained + +#. run testpmd command of bonding:: + + testpmd> port stop all + +#. check if bonded device has been created and slaves have been bonded successful:: + + testpmd> show bonding config 2 + Bonding mode: 4 + IEEE802.3AD Aggregator Mode: + Slaves (2): [0 1] + Active Slaves (2): [0 1] + Primary: [0] + +#. check if bonded port can start:: + + testpmd> port start all + testpmd> start + +#. check if dedicated_queues enable successful:: + + testpmd> stop + testpmd> port stop all + +#. quit testpmd:: + + testpmd> quit + -- 2.25.1