From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 2DCE7A00C4; Thu, 5 Jan 2023 04:10:09 +0100 (CET) Received: from mails.dpdk.org (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id ED9CB42D1E; Thu, 5 Jan 2023 04:10:08 +0100 (CET) Received: from mga06.intel.com (mga06b.intel.com [134.134.136.31]) by mails.dpdk.org (Postfix) with ESMTP id D1FF040041 for ; Thu, 5 Jan 2023 04:10:07 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1672888207; x=1704424207; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=a3F31vr4iHLc6JE1eEVqGHxWxFwkn+P23hAfOs9pDMk=; b=aD/bXOaKv0Sr0aR8FOCftw6+xLWYEb4kTkQofRcr/VTgS27mlYXkvvJt kW66nqaissjAuSGurcpdYlozGMjIvL0PcVJZV/YDQJLEaNn9QAl3GGbEJ 1OEzhB9d3R5MHfqR4iXuXGaB7ZzhFNfhn0sxR5Ji5PdmDZYtg0SMCTnzi 2mmK5B89NPCr1uE0Xaxg9X9KjLQ5521+ksIb90bMHWn4l4rSpp63ApLXD bNNSJ6uX9/9N3hRQ/z1JcmYcWLG7TreIeoL5yTmvRstlvdPIfOAze3CL0 6NHeHPxhTZ8tx2UN9NNSXeKFY/CsJzlH3UU9MOD+Qf5S3p6KY3JIQq3Zw w==; X-IronPort-AV: E=McAfee;i="6500,9779,10580"; a="384398302" X-IronPort-AV: E=Sophos;i="5.96,301,1665471600"; d="scan'208";a="384398302" Received: from orsmga008.jf.intel.com ([10.7.209.65]) by orsmga104.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 04 Jan 2023 19:10:06 -0800 X-IronPort-AV: E=McAfee;i="6500,9779,10580"; a="685949721" X-IronPort-AV: E=Sophos;i="5.96,301,1665471600"; d="scan'208";a="685949721" Received: from unknown (HELO localhost.localdomain) ([10.239.252.20]) by orsmga008-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 04 Jan 2023 19:10:05 -0800 From: Song Jiale To: dts@dpdk.org Cc: Song Jiale Subject: [dts] [PATCH V1 2/7] test_plans/vf_pmd_bonded: add case to test vf bonding Date: Thu, 5 Jan 2023 11:07:47 +0000 Message-Id: <20230105110752.235201-3-songx.jiale@intel.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230105110752.235201-1-songx.jiale@intel.com> References: <20230105110752.235201-1-songx.jiale@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=y Content-Transfer-Encoding: quoted-printable X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org add testplan to test vf bonding. Signed-off-by: Song Jiale --- test_plans/vf_pmd_bonded_test_plan.rst | 523 +++++++++++++++++++++++++ 1 file changed, 523 insertions(+) create mode 100644 test_plans/vf_pmd_bonded_test_plan.rst diff --git a/test_plans/vf_pmd_bonded_test_plan.rst b/test_plans/vf_pmd_bon= ded_test_plan.rst new file mode 100644 index 00000000..83ca7d30 --- /dev/null +++ b/test_plans/vf_pmd_bonded_test_plan.rst @@ -0,0 +1,523 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2023 Intel Corporation + +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +Bonding Tests +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Provide the ability to support Link Bonding for 1GbE and 10GbE ports simil= ar the ability found in Linux to allow the aggregation of multiple (slave) = NICs into a single logical interface between a server and a switch. A new P= MD will then process these interfaces based on the mode of operation specif= ied and supported. This provides support for redundant links, fault toleran= ce and/or load balancing of networks. Bonding may also be used in connectio= n with 802.1q VLAN support. +The following is a good overview http://www.cyberciti.biz/howto/question/s= tatic/linux-ethernet-bonding-driver-howto.php + +Requirements +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +* The Bonding mode SHOULD be specified via an API for a logical bonded int= erface used for link aggregation. +* A new PMD layer SHALL operate on the bonded interfaces and may be used i= n connection with 802.1q VLAN support. +* Bonded ports SHALL maintain statistics similar to that of normal ports +* The slave links SHALL be monitor for link status change. See also the co= ncept of up/down time delay to handle situations such as a switch reboots, = it is possible that its ports report "link up" status before they become us= able. +* The following bonding modes SHALL be available; + + - Mode =3D 0 (balance-rr) Round-robin policy: (default). Transmit packet= s in sequential order from the first available network interface (NIC) slav= e through the last. This mode provides load balancing and fault tolerance. = Packets may be bulk dequeued from devices then serviced in round-robin mann= er. The order should be specified so that it corresponds to the other side. + + - Mode =3D 1 (active-backup) Active-backup policy: Only one NIC slave in= the bond is active. A different slave becomes active if, and only if, the = active slave fails. The single logical bonded interface's MAC address is ex= ternally visible on only one NIC (port) to avoid confusing the network swit= ch. This mode provides fault tolerance. Active-backup policy is useful for = implementing high availability solutions using two hubs + + - Mode =3D 2 (balance-xor) XOR policy: Transmit network packets based on= the default transmit policy. The default policy (layer2) is a simple [(sou= rce MAC address XOR'd with destination MAC address) modulo slave count]. A= lternate transmit policies may be selected. The default transmit policy sel= ects the same NIC slave for each destination MAC address. This mode provide= s load balancing and fault tolerance. + + - Mode =3D 3 (broadcast) Broadcast policy: Transmit network packets on a= ll slave network interfaces. This mode provides fault tolerance but is only= suitable for special cases. + + - Mode =3D 4 (802.3ad) IEEE 802.3ad Dynamic link aggregation. Creates ag= gregation groups that share the same speed and duplex settings. Utilizes al= l slaves in the active aggregator according to the 802.3ad specification. T= his mode requires a switch that supports IEEE 802.3ad Dynamic link aggregat= ion. Slave selection for outgoing traffic is done according to the transmit= hash policy, which may be changed from the default simple XOR layer2 polic= y. + + - Mode =3D 5 (balance-tlb) Adaptive transmit load balancing. Linux bondi= ng driver mode that does not require any special network switch support. Th= e outgoing network packet traffic is distributed according to the current l= oad (computed relative to the speed) on each network interface slave. Incom= ing traffic is received by one currently designated slave network interface= . If this receiving slave fails, another slave takes over the MAC address o= f the failed receiving slave. + + - Mode =3D 6 (balance-alb) Adaptive load balancing. Includes balance-tlb= plus receive load balancing (rlb) for IPV4 traffic, and does not require a= ny special network switch support. The receive load balancing is achieved b= y ARP negotiation. The bonding driver intercepts the ARP Replies sent by th= e local system on their way out and overwrites the source hardware address = with the unique hardware address of one of the NIC slaves in the single log= ical bonded interface such that different network-peers use different MAC a= ddresses for their network packet traffic. +* The available transmit policies SHALL be as follows; + + - layer2: Uses XOR of hardware MAC addresses to generate the hash. The = formula is (source MAC XOR destination MAC) modulo slave count. This algori= thm will place all traffic to a particular network peer on the same slave. = This algorithm is 802.3ad compliant. + - layer3+4: This policy uses upper layer protocol information, when avai= lable, to generate the hash. This allows for traffic to a particular netwo= rk peer to span multiple slaves, although a single connection will not span= multiple slaves. The formula for unfragmented TCP and UDP packets is ((s= ource port XOR dest port) XOR ((source IP XOR dest IP) AND 0xffff) modulo= slave count. For fragmented TCP or UDP packets and all other IP protocol = traffic, the source and destination port information is omitted. For non-I= P traffic, the formula is the same as for the layer2 transmit hash policy. = This policy is intended to mimic the behavior of certain switches, notably = Cisco switches with PFC2 as well as some Foundry and IBM products. This alg= orithm is not fully 802.3ad compliant. A single TCP or UDP conversation co= ntaining both fragmented and unfragmented packets will see packets striped = across two interfaces. This may result in out of order delivery. Most tra= ffic types will not meet these criteria, as TCP rarely fragments traffic, a= nd most UDP traffic is not involved in extended conversations. Other imple= mentations of 802.3ad may or may not tolerate this noncompliance. + +* Upon unbonding the bonding PMD driver MUST restore the MAC addresses tha= t the slaves had before they were enslaved. +* According to the bond type, when the bond interface is placed in promisc= uous mode it will propagate the setting to the slave devices as follow: For= mode=3D0, 2, 3 and 4 the promiscuous mode setting is propagated to all sla= ves. +* Mode=3D0, 2, 3 generally require that the switch have the appropriate po= rts grouped together (e.g. Cisco 5500 series with EtherChannel support or m= ay be called a trunk group). + +* Goals: + + - Provide a forwarding example that demonstrates Link Bonding for 2/4x 1= GbE ports and 2x 10GbE with the ability to specify the links to be bound, t= he port order if required, and the bonding type to be used. MAC address of = the bond MUST be settable or taken from its first slave device. The example= SHALL also allow the enable/disable of promiscuous mode and disabling of t= he bonding resulting in the return of the normal interfaces and the ability= to bring up and down the logical bonded link. + - Provide the performance for each of these modes. + +This bonding test plan is mainly to test basic bonding APIs via testpmd an= d the supported modes(0-3) and each mode's performance in R1.7. + +Prerequisites for Bonding +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +* NIC and IXIA ports requirements. + + - Tester: have 4 10Gb (82599) ports and 4 1Gb ports. + - DUT: have 4 10Gb (82599) ports and 4 1Gb ports. All functional tests s= hould be done on both 10G and 1G port. + - IXIA: have 4 10G ports and 4 1G ports. IXIA is used for performance te= st. + +* BIOS settings on DUT: + + - Enhanced Intel Speedstep----DISABLED + - Processor C3--------------------DISABLED + - Processor C6--------------------DISABLED + - Hyper-Threading----------------ENABLED + - Intel VT-d-------------------------DISABLED + - MLC Streamer-------------------ENABLED + - MLC Spatial Prefetcher--------ENABLED + - DCU Data Prefetcher-----------ENABLED + - DCU Instruction Prefetcher----ENABLED + - Direct Cache Access(DCA)--------------------- ENABLED + - CPU Power and Performance Policy-----------Performance + - Memory Power Optimization---------------------Performance Optimized + - Memory RAS and Performance Configuration-->NUMA Optimized----ENABLED + +* create 1 vf for 4 dut ports:: + + echo 1 > /sys/bus/pci/devices/0000\:31\:00.0/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000\:31\:00.1/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000\:31\:00.2/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000\:31\:00.3/sriov_numvfs + +* disabel spoofchk for VF:: + + ip link set dev {pf0_iface} vf 0 spoofchk off + ip link set dev {pf1_iface} vf 0 spoofchk off + ip link set dev {pf2_iface} vf 0 spoofchk off + ip link set dev {pf3_iface} vf 0 spoofchk off + +* Connections ports between tester/ixia and DUT + + - TESTER(Or IXIA)------DUT + - portA----------------vf0 + - portB----------------vf1 + - portC----------------vf2 + - portD----------------vf3 + + +Test Setup#1 for Functional test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D + +Tester has 4 ports(portA--portD), and DUT has 4 ports(vf0-vf3), then conne= ct portA to vf0, portB to vf1, portC to vf1, portD to vf3. + + +Test Case1: Basic bonding--Create bonded devices and slaves +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Use Setup#1. + +Create bonded device, add first slave, verify default bonded device has de= fault mode 0 and default primary slave.Below are the sample commands and ou= tput:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i + ..... + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Port 2 Link Up - speed 10000 Mbps - full-duplex + Port 3 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> create bonded device 1 1(mode socket, if not set, default mod= e=3D0, default socket=3D0) + Created new bonded device (Port 4) + testpmd> add bonding slave 1 4 + Adding port 1 as slave + testpmd> show bonding config 4 + Bonding mode: 1 + Slaves: [1] + Active Slaves: [] + Failed to get primary slave for port=3D4 + testpmd> port start 4 + ...... + Done + testpmd> show bonding config 4 + Bonding mode: 1 + Slaves: [1] + Active Slaves: [1] + Primary: [1] + +Create another bonded device, and check if the slave added to bonded devic= e1 can't be added to bonded device2:: + + testpmd> create bonded device 1 1 + Created new bonded device (Port 5) + testpmd> add bonding slave 0 4 + Adding port 0 as slave + testpmd> add bonding slave 0 5 + Failed to add port 0 as slave + +Change the bonding mode and verify if it works:: + + testpmd> set bonding mode 3 4 + testpmd> show bonding config 4 + +Add 2nd slave, and change the primary slave to 2nd slave and verify if it = works:: + + testpmd> add bonding slave 2 4 + testpmd> set bonding primary 2 4 + testpmd> show bonding config 4 + +Remove the slaves, and check the bonded device again. Below is the sample = command:: + + testpmd> remove bonding slave 1 4 + testpmd> show bonding config 4(Verify that slave1 is removed from slav= es/active slaves). + testpmd> remove bonding slave 0 4 + testpmd> remove bonding slave 2 4(This command can't be done, since bo= nded device need at least 1 slave) + testpmd> show bonding config 4 + + +Test Case2: Basic bonding--MAC Address Test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Use Setup#1. + +Create bonded device, add one slave, verify bonded device MAC address is t= he slave's MAC:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i + ..... + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Port 2 Link Up - speed 10000 Mbps - full-duplex + Port 3 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> create bonded device 1 1 + testpmd> add bonding slave 1 4 + testpmd> show port info 1 + ********************* Infos for port 1 ********************* + MAC address: 90:E2:BA:4A:54:81 + Connect to socket: 0 + memory allocation on the socket: 0 + Link status: up + Link speed: 10000 Mbps + Link duplex: full-duplex + Promiscuous mode: enabled + Allmulticast mode: disabled + Maximum number of MAC addresses: 127 + Maximum number of MAC addresses of hash filtering: 4096 + VLAN offload: + strip on + filter on + qinq(extend) off + testpmd> show port info 4 + ********************* Infos for port 4 ********************* + MAC address: 90:E2:BA:4A:54:81 + Connect to socket: 1 + memory allocation on the socket: 0 + Link status: down + Link speed: 10000 Mbps + Link duplex: full-duplex + Promiscuous mode: enabled + Allmulticast mode: disabled + Maximum number of MAC addresses: 1 + Maximum number of MAC addresses of hash filtering: 0 + VLAN offload: + strip off + filter off + qinq(extend) off + +Continue with above case, add 2nd slave, check the configuration of a bond= ed device. Verify bonded device MAC address is that of primary slave and al= l slaves' MAC address is same. Below are the sample commands:: + + testpmd> add bonding slave 2 4 + testpmd> show bonding config 4 + testpmd> show port info 1 ------(To check if vf1,2,4 has the same MAC= address as vf1) + testpmd> show port info 4 + testpmd> show port info 2 + +Set the bonded device's MAC address, and verify the bonded port and slaves= ' MAC address have changed to the new MAC address:: + + testpmd> set bonding mac_addr 4 00:11:22:00:33:44 + testpmd> show port info 1 ------(To check if vf1,2,4 has the same MAC= address as new MAC) + testpmd> show port info 4 + testpmd> show port info 2 + +Change the primary slave to 2nd slave, verify that the bonded device's MAC= and slave's MAC is still original. +Remove 2nd slave from the bonded device, then verify 2nd slave device MAC = address is returned to the correct MAC:: + + testpmd> port start 4(Make sure the port4 has the primary slave) + testpmd> show bonding config 4 + testpmd> set bonding primary 2 4 + testpmd> show bonding config 4-----(Verify that vf1 is primary slave) + testpmd> show port info 4 + testpmd> show port info 2 + testpmd> show port info 1-----(Verify that the bonding port and the sl= aves`s MAC is still original) + testpmd> remove bonding slave 2 4 + testpmd> show bonding config 4-----(Verify that vf1 is primary slave) + testpmd> show port info 2 ------(To check if vf1 returned to correct = MAC) + testpmd> show port info 4 ------(Verify that bonding device and slave = MAC is still original when remove the primary slave) + testpmd> show port info 1 + +Add another slave(3rd slave), then remove this slave from a bonded device,= verify slave device MAC address is returned to the correct MAC:: + + testpmd> add bonding slave 3 4 + testpmd> show bonding config 4 + testpmd> remove bonding slave 3 4 + testpmd> show bonding config 4 + testpmd> show port info 3 ------(To check if vf3 has returned to the = correct MAC) + + +Test Case3: Basic bonding--Device Promiscuous Mode Test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D + +Use Setup#1. + +set vf0 trust on:: + + ip link set dev {pf0_iface} vf 0 trust on + +Create bonded device, add 3 slaves. Set promiscuous mode on bonded eth dev= . Verify all slaves of bonded device are changed to promiscuous mode:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i + ..... + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Port 2 Link Up - speed 10000 Mbps - full-duplex + Port 3 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> create bonded device 3 1 + testpmd> add bonding slave 0 4 + testpmd> add bonding slave 1 4 + testpmd> add bonding slave 2 4 + testpmd> show port info all---(Check if vf0,1,2,4 has Promiscuous mode= enabled) + ********************* Infos for port 0 ********************* + MAC address: 90:E2:BA:4A:54:80 + Connect to socket: 0 + memory allocation on the socket: 0 + Link status: up + Link speed: 10000 Mbps + Link duplex: full-duplex + **Promiscuous mode: enabled** + Allmulticast mode: disabled + Maximum number of MAC addresses: 127 + Maximum number of MAC addresses of hash filtering: 4096 + VLAN offload: + strip on + filter on + qinq(extend) off + +Send 1 packet to any bonded slave port(e.g: vf0) with a different MAC dest= ination than that of that eth dev(00:11:22:33:44:55) and verify that data i= s received at slave and bonded device. (vf0 and port4):: + + testpmd> set portlist 3,4 + testpmd> port start all + testpmd> start + testpmd> show port stats all----(Verify vf0 has received 1 packet, por= t4 has received 1 packet, also vf3 has transmitted 1 packet) + +Disable promiscuous mode on bonded device.Verify all slaves of bonded eth = dev have changed to be in non-promiscuous mode.This is applied to mode 0,2,= 3,4, for other mode, such as mode1, this is only applied to active slave:: + + testpmd> set promisc 4 off + testpmd> show port info all---(Verify that vf0,1,2 and 4 has promiscuo= us mode disabled, and it depends on the mode) + +Send 1 packet to any bonded slave port(e.g: vf0) with MAC not for that sla= ve and verify that data is not received on bonded device and slave:: + + testpmd> show port stats all----(Verify vf0 has NOT received 1 packet,= port4 NOT received 1 packet,too) + +Send 1 packet to any bonded slave port(e.g: vf0) with that slave's MAC and= verify that data is received on bonded device and slave since the MAC addr= ess is correct:: + + testpmd> show port stats all----(Verify vf0 has received 1 packet, por= t4 received 1 packet,also vf3 has transmitted 1 packet) + +Test Case4: Mode 0(Round Robin) TX/RX test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +TX: + +Add ports 1-3 as slave devices to the bonded port 5. +Send a packet stream from port D on the traffic generator to be forwarded = through the bonded port. +Verify that traffic is distributed equally in a round robin manner through= ports 1-3 on the DUT back to the traffic generator. +The sum of the packets received on ports A-C should equal the total packet= s sent from port D. +The sum of the packets transmitted on ports 1-3 should equal the total pac= kets transmitted from port 5 and received on port 4:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i + .... + + testpmd> create bonded device 0 1 + testpmd> add bonding slave 0 4 + testpmd> add bonding slave 1 4 + testpmd> add bonding slave 2 4 + testpmd> set portlist 3,4 + testpmd> port start all + testpmd> start + testpmd> show port stats all----(Check vf0,1,2,3 and 4 tx/rx packet st= ats) + +Send 100 packets to vf3 and verify vf3 receive 100 packets, port4 transmit= 100 packets,meanwhile the sum of the packets transmitted on port 0-2 shoul= d equal the total packets transmitted from port4:: + + testpmd> show port stats all----(Verify vf3 100 rx packets,vf0,1,2 hav= e total 100 tx packets,port4 have 100 tx packets) + +RX: +Add ports 1-3 as slave devices to the bonded port 5. +Send a packet stream from port A, B or C on the traffic generator to be fo= rwarded through the bonded port 5 to port 4 +Verify the sum of the packets transmitted from the traffic generator port = is equal the total received packets on port 5 and transmitted on port 4. +Send a packet stream from the other 2 ports on the traffic generator conne= cted to the bonded port slave ports. +Verify data transmission/reception counts. + +Send 10 packets from port 0-2 to vf3:: + + testpmd> clear port stats all + testpmd> show port stats all----(Verify vf0-2 have 10 rx packets respe= ctively,port4 have 30 rx packets,meanwhile vf3 have 30 tx packets) + + +Test Case5: Mode 0(Round Robin) Bring one slave link down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D + +Add ports 1-3 as slave devices to the bonded port 5. +Bring the link on either port 1, 2 or 3 down. +Send a packet stream from port D on the traffic generator to be forwarded = through the bonded port. +Verify that forwarded traffic is distributed equally in a round robin mann= er through the active bonded ports on the DUT back to the traffic generator. +The sum of the packets received on ports A-C should equal the total packet= s sent from port D. +The sum of the packets transmitted on the active bonded ports should equal= the total packets transmitted from port 5 and received on port 4. +No traffic should be sent on the bonded port which was brought down. +Bring link back up link on bonded port. +Verify that round robin return to operate across all bonded ports + +Test Case6: Mode 0(Round Robin) Bring all slave links down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D + +Add ports 1-3 as slave devices to the bonded port 5. +Bring the links down on all bonded ports. +Verify that bonded callback for link down is called. +Verify that no traffic is forwarded through bonded device + +Test Case7: Mode 1(Active Backup) TX/RX Test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Add ports 0-2 as slave devices to the bonded port 4.Set port 0 as active s= lave on bonded device:: + + testpmd> create bonded device 1 1 + testpmd> add bonding slave 0 4 + testpmd> add bonding slave 1 4 + testpmd> add bonding slave 2 4 + testpmd> show port info 4-----(Check the MAC address of bonded device) + testpmd> set portlist 3,4 + testpmd> port start all + testpmd> start + +Send a packet stream(100 packets) from port A on the traffic generator to = be forwarded through the bonded port4 to vf3. Verify the sum of the packets= transmitted from the traffic generator portA is equal the total received p= ackets on vf0, 4 and Port D and transmitted on port 4:: + + testpmd> show port stats all---(Verify vf0 receive 100 packets, and po= rt4 receive 100 packets, and vf3 transmit 100 packets) + +Send a packet stream(100 packets) from portD on the traffic generator to b= e forwarded through vf3 to the bonded port4. Verify the sum of the packets(= 100packets) transmitted from the traffic generator port is equal the total = received packets on port4 and portA and transmitted on port4 and vf0:: + + testpmd> show port stats all---(Verify vf0/port4 TX 100 packets, and v= f3 receive 100 packets) + +Test Case8: Mode 1(Active Backup) Change active slave, RX/TX test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Continuing from Test Case8. +Change the active slave port from vf0 to vf1.Verify that the bonded device= 's MAC has changed to slave1's MAC:: + + testpmd> set bonding primary 1 4 + +Repeat the transmission and reception(TX/RX) test verify that data is now = transmitted and received through the new active slave and no longer through= vf0 + + +Test Case9: Mode 1(Active Backup) Link up/down active eth dev +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Bring link between port A and vf0 down. If tester is ixia, can use IxExplo= rer to set the "Simulate Cable Disconnect" at the port property. +Verify that the active slave has been changed from vf0. +Repeat the transmission and reception test verify that data is now transmi= tted and received through the new active slave and no longer through vf0 + +Test Case10: Mode 1(Active Backup) Bring all slave links down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Bring all slave ports of bonded port down. +Verify that bonded callback for link down is called and no active slaves. +Verify that data cannot be sent or received through bonded port. Send 100 = packets to vf3 and verify that bonded port can't TX 100 packets. + +Test Case11: Mode 2(Balance XOR) TX Load Balance test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D + +Bonded port will activate each slave eth dev based on the following hash f= unction:: + + ((dst_mac XOR src_mac) % (number of slave ports)) + +Send 300 packets from non-bonded port(vf3),and verify these packets will b= e forwarded to bonded device. The bonded device will transmit these packets= to all slaves. +Verify that each slave receive correct number of packets according to the = policy. The total number of packets which are on slave should be equal as 3= 00 packets. + + +Test Case12: Mode 2(Balance XOR) TX Load Balance Link down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D + +Bring link down of one slave. +Send 300 packets from non-bonded port(vf3), and verify these packets will = be forwarded to bonded device. +Verify that each active slave receive correct number of packets(according = to the mode policy), and the down slave will not receive packets. + +Test Case13: Mode 2(Balance XOR) Bring all slave links down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Bring all slave links down. +Verify that bonded callback for link down is called. +Verify no packet can be sent. + +Test Case14: Mode 2(Balance XOR) Layer 3+4 forwarding +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D + +Use =E2=80=9Cxmit_hash_policy()=E2=80=9D to change to this forwarding mode +Create a stream of traffic which will exercise all slave ports using the t= ransmit policy:: + + ((SRC_PORT XOR DST_PORT) XOR ((SRC_IP XOR DST_IP) AND 0xffff) % # of S= laves + +Transmit data through bonded device, verify TX packet count for each slave= port is as expected + +Test Case15: Mode 2(Balance XOR) RX test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Send 100 packets to each bonded slaves(vf0,1,2) +Verify that each slave receives 100 packets and the bonded device receive = a total 300 packets. +Verify that the bonded device forwards 300 packets to the non-bonded port(= port4). + +Test Case16: Mode 3(Broadcast) TX/RX Test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Add ports 0-2 as slave devices to the bonded port 4.Set port 0 as active s= lave on bonded device:: + + testpmd> create bonded device 3 1 + testpmd> add bonding slave 0 4 + testpmd> add bonding slave 1 4 + testpmd> add bonding slave 2 4 + testpmd> show port info 4-----(Check the MAC address of bonded device) + testpmd> set portlist 3,4 + testpmd> port start all + testpmd> start + +RX: Send a packet stream(100 packets) from port A on the traffic generator= to be forwarded through the bonded port4 to vf3. Verify the sum of the pac= kets transmitted from the traffic generator portA is equal the total receiv= ed packets on vf0, port4 and portD(Traffic generator):: + + testpmd> show port stats all---(Verify vf0 receive 100 packets, and po= rt4 receive 100 packets, and vf3 transmit 100 packets) + +TX: Send a packet stream(100 packets) from portD on the traffic generator = to be forwarded through vf3 to the bonded port4. Verify the sum of the pack= ets(100packets) transmitted from the traffic generator port is equal the to= tal received packets on port4, portA and transmitted to vf0.:: + + testpmd> show port stats all---(Verify vf3 RX 100 packets, and vf0,1,2= ,4 TX 100 packets) + +Test Case17: Mode 3(Broadcast) Bring one slave link down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D + +Bring one slave port link down. Send 100 packets through portD to vf3, the= n vf3 forwards to bonded device(port4), verify that the bonded device and o= ther slaves TX the correct number of packets(100 packets for each port). + + +Test Case18: Mode 3(Broadcast) Bring all slave links down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D + +Bring all slave ports of bonded port down +Verify that bonded callback for link down is called +Verify that data cannot be sent or received through bonded port. + +Test Case19: Mode 5(TLB) Base Test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D + +Repeat Test Case1, Test Case2, and Test Case3 using the bonding device wit= h mode 5(TLB). +the bonding device with mode 5(TLB):: + + testpmd> the bonding device with mode 5(TLB) + +Test Case20: Mode 5(TLB) TX/RX test +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D +Repeat Test Case4 using the bonding device with mode 5(TLB). +the bonding device with mode 5(TLB):: + + testpmd> the bonding device with mode 5(TLB) + +Test Case21: Mode 5(TLB) Bring one slave link down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D + +Bring one slave port link down. Send 100 packets through portA to vf3, the= n vf3 forwards to bonded device(port4), +verify that the bonded device and other slaves TX the correct number of pa= ckets(100 packets for each port). + +Test Case22: Mode 5(TLB) Bring all slave links down +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D + +Bring all slave ports of bonded port down +Verify that bonded callback for link down is called +Verify that data cannot be sent or received through bonded port. \ No newline at end of file --=20 2.25.1