* [dts][PATCH V2 2/4] test_plans/loopback_vhost_async_perf_dsa: add new testplan
@ 2023-02-16 8:09 Wei Ling
0 siblings, 0 replies; only message in thread
From: Wei Ling @ 2023-02-16 8:09 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
Add test_plans/loopback_vhost_async_perf_dsa_test_plan.rst to test
loopback vhost/virtio multi-paths async data-path use DSA device
with dpdk and kernel driver.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
...oopback_vhost_async_perf_dsa_test_plan.rst | 626 ++++++++++++++++++
1 file changed, 626 insertions(+)
create mode 100644 test_plans/loopback_vhost_async_perf_dsa_test_plan.rst
diff --git a/test_plans/loopback_vhost_async_perf_dsa_test_plan.rst b/test_plans/loopback_vhost_async_perf_dsa_test_plan.rst
new file mode 100644
index 00000000..44d8e549
--- /dev/null
+++ b/test_plans/loopback_vhost_async_perf_dsa_test_plan.rst
@@ -0,0 +1,626 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2023 Intel Corporation
+
+===========================================================
+Loopback vhost/virtio multi-paths async data-path test plan
+===========================================================
+
+Benchmark vhost/virtio-user loopback test with 10 tx/rx paths when vhost uses the asynchronous operation.
+Includes split ring mergeable, non-mergeable, vector_rx, inorder mergeable,
+inorder non-mergeable, packed ring mergeable, packed ring non-mergeable，
+packed ring inorder mergeable, packed ring inorder non-mergeable path and vectorized path.
+
+Test case
+=========
+
+Common steps
+------------
+
+1. Bind 1 dsa device to idxd, then generate 1wq by below command::
+
+ ./usertools/dpdk-devbind.py -b idxd 0000:6a:01.0
+ ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+
+2. Bind 1 dsa device to vfio-pci::
+
+ ./usertools/dpdk-devbind.py -b idxd 0000:6f:01.0
+
+Test Case 1: loopback vhost async test with split ring inorder mergeable path using IDXD kernel driver
+------------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ - -vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different pac ket length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 2: loopback vhost async test with split ring inorder non-mergeable path using IDXD kernel driver
+----------------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 3: loopback vhost async test with split ring mergeable path using IDXD kernel driver
+----------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 4: loopback vhost async test with split ring non-mergeable path using IDXD kernel driver
+--------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 5: loopback vhost async test with split ring vectorized path using IDXD kernel driver
+-----------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 6: loopback vhost async test with packed ring inorder mergeable path using IDXD kernel driver
+-------------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 7: loopback vhost async test with packed ring inorder non-mergeable path using IDXD kernel driver
+-----------------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 8: loopback vhost async test with packed ring mergeable path using IDXD kernel driver
+-----------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 9: loopback vhost async test with packed ring non-mergeable path using IDXD kernel driver
+---------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 10: loopback vhost async test with packed ring vectorized path using IDXD kernel driver
+-------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@wq0.0;rxq0@wq0.1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1 \
+ -- -i --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 11: loopback vhost async test with split ring inorder mergeable path using vfio-pci driver
+----------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 12: loopback vhost async test with split ring inorder non-mergeable path using vfio-pci driver
+--------------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 13: loopback vhost async test with split ring mergeable path using vfio-pci driver
+--------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 14: loopback vhost async test with split ring non-mergeable path using vfio-pci driver
+------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 15: loopback vhost async test with split ring vectorized path using vfio-pci driver
+---------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 16: loopback vhost async test with packed ring inorder mergeable path using vfio-pci driver
+-----------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 17: loopback vhost async test with packed ring inorder non-mergeable path using vfio-pci driver
+---------------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 18: loopback vhost async test with packed ring mergeable path using vfio-pci driver
+---------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 19: loopback vhost async test with packed ring non-mergeable path using vfio-pci driver
+-------------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
+
+Test Case 20: loopback vhost async test with packed ring vectorized path using vfio-pci driver
+----------------------------------------------------------------------------------------------
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 2-4 -a 0000:6f:01.0,max_queues=2 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@0000:6f:01.0-q0;rxq0@0000:6f:01.0-q1]' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 8 -l 5-6 \
+ --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0,vectorized=1 \
+ -- -i --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd::
+
+ testpmd>set txpkts <frame_size>
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+5. Quit virtio-user, rerun step 2-4 with different packet length, <frame_size> include [64, 128, 256, 512, 1024, 1518].
--
2.25.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-02-16 8:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-16 8:09 [dts][PATCH V2 2/4] test_plans/loopback_vhost_async_perf_dsa: add new testplan Wei Ling
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).