test suite reviews and discussions
 help / color / mirror / Atom feed
From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V2 2/3] test_plans/dsa_test_plan: add dsa testplan
Date: Fri, 10 Mar 2023 15:52:22 +0800	[thread overview]
Message-ID: <20230310075222.1462859-1-weix.ling@intel.com> (raw)

Add new dsa test_plan to test dpdk-dma application
and example of how to use the DMAdev API to make a packet copy
application use DSA channel with DPDK driver and Kernel driver.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 test_plans/dsa_test_plan.rst | 353 +++++++++++++++++++++++++++++++++++
 1 file changed, 353 insertions(+)
 create mode 100644 test_plans/dsa_test_plan.rst

diff --git a/test_plans/dsa_test_plan.rst b/test_plans/dsa_test_plan.rst
new file mode 100644
index 00000000..9e5eb6c7
--- /dev/null
+++ b/test_plans/dsa_test_plan.rst
@@ -0,0 +1,353 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+   Copyright(c) 2023 Intel Corporation
+
+=============
+DSA test plan
+=============
+
+Description
+===========
+
+This sample is intended as a demonstration of the basic components of a DPDK
+forwarding application and example of how to use the DMAdev API to make a packet
+copy application.
+
+Also while forwarding, the MAC addresses are affected as follows:
+
+*   The source MAC address is replaced by the TX port MAC address
+
+*   The destination MAC address is replaced by  02:00:00:00:00:TX_PORT_ID
+
+This application can be used to compare performance of using software packet
+copy with copy done using a DMA device for different sizes of packets.
+The example will print out statistics each second. The stats shows
+received/send packets and packets dropped or failed to copy.
+
+In order to run the hardware copy application, the copying device
+needs to be bound to user-space IO driver.
+
+Refer to the "DMAdev library" chapter in the "Programmers guide" for information
+on using the library.
+
+The application requires a number of command line options:
+
+.. code-block:: console
+
+    ./<build_dir>/examples/dpdk-dma [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
+        [--[no-]mac-updating] [-b BS] [-f FS] [-i SI]
+
+where,
+
+*   p MASK: A hexadecimal bitmask of the ports to configure (default is all)
+
+*   q NQ: Number of Rx queues used per port equivalent to DMA channels
+    per port (default is 1)
+
+*   c CT: Performed packet copy type: software (sw) or hardware using
+    DMA (hw) (default is hw)
+
+*   s RS: Size of dmadev descriptor ring for hardware copy mode or rte_ring for
+    software copy mode (default is 2048)
+
+*   --[no-]mac-updating: Whether MAC address of packets should be changed
+    or not (default is mac-updating)
+
+*   b BS: set the DMA batch size
+
+*   f FS: set the max frame size
+
+*   i SI: set the interval, in second, between statistics prints (default is 1)
+
+The application can be launched in various configurations depending on
+provided parameters. The app can use up to 2 lcores: one of them receives
+incoming traffic and makes a copy of each packet. The second lcore then
+updates MAC address and sends the copy. If one lcore per port is used,
+both operations are done sequentially. For each configuration an additional
+lcore is needed since the main lcore does not handle traffic but is
+responsible for configuration, statistics printing and safe shutdown of
+all ports and devices.
+
+The application can use a maximum of 8 ports.
+
+To run the application in a Linux environment with 3 lcores (the main lcore,
+plus two forwarding cores), a single port (port 0), software copying and MAC
+updating issue the command:
+
+    $ ./<build_dir>/examples/dpdk-dma -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+
+To run the application in a Linux environment with 2 lcores (the main lcore,
+plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
+updating issue the command:
+
+    $ ./<build_dir>/examples/dpdk-dma -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+
+Prerequisites
+=============
+
+Test flow
+---------
+    
+NIC RX -> copy packet -> free original -> update mac addresses -> NIC TX
+
+General set up
+--------------
+1. Compile DPDK::
+
+    # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
+    # ninja -C <dpdk build dir> -j 110
+    For example:
+    CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
+    ninja -C x86_64-native-linuxapp-gcc -j 110
+
+Test case
+=========
+
+Test Case 1: DMA basic test with differnet size packets using DSA dpdk driver
+-----------------------------------------------------------------------------
+
+1.Bind 1 DSA port and 1 NIC port to vfio-pci driver.
+
+2.Launch dma app::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-1 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=1 -- -p 0x1 -q 1 --mac-updating -c hw
+
+3.Send different size packets (64B, 256B, 512B, 1024B, IMIX) from TG to NIC.
+
+4.Check performance from “Total packets Tx” and check log includes "Worker Threads = 1, Copy Mode = hw".
+
+Test Case 2: DMA test with multi-threads using DSA dpdk driver
+--------------------------------------------------------------
+
+1.Bind 1 DSA port and 1 NIC port to vfio-pci driver.
+
+2.Launch dma app with three cores::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=1 -- -p 0x1 -q 1 --mac-updating -c hw
+
+3. Send different size packets from TG to NIC.
+
+4.Check performance from “Total packets Tx” and check log includes "Worker Threads = 2, Copy Mode = hw".
+
+Test Case 3: DMA test with multi NIC ports using DSA dpdk driver
+----------------------------------------------------------------
+
+1.Bind 1 DSA port and 2 NIC ports to vfio-pci driver.
+
+2.Launch dma app with multi-ports::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-4 -n 2 -a 0000:29:00.0 -a 0000:29:00.1 -a 0000:6a:01.0,max_queues=2 -- -p 0x3 -q 1 --mac-updating -c hw
+
+3.Send different size packets (64B, 256B, 512B, 1024B, IMIX) from TG to two NIC ports.
+
+4.Check stats of two ports, each port's performance shows in “Total packets Tx” and each port's log includes "Worker Threads = 2, Copy Mode = hw".
+
+Test Case 4: DMA test with multi-queues using DSA dpdk driver
+-------------------------------------------------------------
+
+1.Bind 1 DSA port and 1 NIC port to vfio-pci driver.
+
+2.Launch dma app with multi-queues::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=2 -- -p 0x1 -q 1 --mac-updating -c hw
+
+3. Send random ip packets (64B, 256B, 512B, 1024B, IMIX) from TG to NIC port.
+
+4. Check stats of dma app, "Worker Threads = 2, Copy Mode = hw, Rx Queues = 2" and each dma channel can enqueue packets.
+
+5. Repeat step2 to step4 with queue number 4 and qemu number 8, at the same time, set max_queues equal to queue number.
+Check performance gains status when queue numbers added.
+
+Test Case 5: DMA performance comparison between mac-updating and no-mac-updating using DSA dpdk driver
+------------------------------------------------------------------------------------------------------
+
+1.Bind 1 DSA port and 1 NIC port to vfio-pci driver.
+
+2.Launch dma app::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-1 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=2 -- -p 0x1 -q 2 --no-mac-updating -c hw
+
+3. Send random ip packets (64B, 256B, 512B, 1024B, IMIX) from TG to NIC port.
+
+4. Check performance from dma app::
+
+    Total packets Tx:                   xxx [pps]
+
+5.Launch dma app::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-1 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=2 -- -p 0x1 -q 2 --mac-updating -c hw
+
+6. Send random ip packets (64B, 256B, 512B, 1024B, IMIX) from TG to NIC port.
+
+7. Check performance from dma app::
+
+    Total packets Tx:                   xxx [pps]
+  
+Test Case 6: DMA performance comparison between SW copies and HW copies using DSA dpdk driver  
+---------------------------------------------------------------------------------------------
+
+1.Bind 1 DSA port and 1 NIC port to vfio-pci driver.
+
+2.Launch dma app with SW mode::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=4 -- -p 0x1 -q 4 --mac-updating  -c sw
+
+3. Send random ip packets with different packet size,includes [64, 128, 256, 512, 1024, 1518] from TG.
+
+4. Check performance from dma app::
+
+    Total packets Tx:                   xxx [pps]
+
+5.Launch dma app with HW mode::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a 0000:6a:01.0,max_queues=4 -- -p 0x1 -q 4 --mac-updating -c hw
+
+6. Send random ip packets with different packet size,includes [64, 128, 256, 512, 1024, 1518] from TG.
+
+7. Check performance from dma app and compare with hw copy test::
+
+    Total packets Tx:                   xxx [pps]
+
+Test Case 7: DMA basic test with differnet size packets using DSA kernel driver
+-------------------------------------------------------------------------------
+
+1.Bind 1 DSA port to idxd driver and 1 NIC port to vfio-pci driver::
+
+   <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 29:00.0
+
+   ls /dev/dsa #check wq configure, reset if exist
+   <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+   <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+   ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+   ls /dev/dsa #check wq configure success
+
+2.Launch dma app::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-1 -n 2 -a 0000:29:00.0 -a wq0.0 -- -p 0x1 -q 1 --mac-updating -c hw
+
+3.Send different size packets (64B, 256B, 512B, 1024B, IMIX) from TG to NIC.
+
+4.Check performance from “Total packets Tx” and check log includes "Worker Threads = 1, Copy Mode = hw".
+
+Test Case 8: DMA test with multi-threads using DSA kernel driver
+----------------------------------------------------------------
+
+1.Bind 1 DSA port to idxd driver and 1 NIC port to vfio-pci driver.
+
+2.Launch dma app with three cores::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a wq0.0 -- -p 0x1 -q 1 --mac-updating -c hw
+
+3. Send different size packets from TG to NIC.
+
+4.Check performance from “Total packets Tx” and check log includes "Worker Threads = 2, Copy Mode = hw".
+
+Test Case 9: DMA test with multi NIC ports using DSA kernel driver
+------------------------------------------------------------------
+
+1.Bind 1 DSA port to idxd driver and two NIC ports to vfio-pci driver::
+
+   <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 29:00.0
+
+   ls /dev/dsa #check wq configure, reset if exist
+   <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+   <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+   ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+   ls /dev/dsa #check wq configure success
+
+2.Launch dma app with multi-ports::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-4 -n 2 -a 0000:29:00.0 -a 0000:29:00.1 -a wq0.0 -a wq0.1 -- -p 0x3 -q 1 --mac-updating -c hw
+
+3.Send different size packets (64B, 256B, 512B, 1024B, IMIX) from TG to two NIC ports.
+
+4.Check stats of two ports, each port's performance shows in “Total packets Tx” and each port's log includes "Worker Threads = 2, Copy Mode = hw".
+
+Test Case 10: DMA test with multi-queues using DSA kernel driver
+----------------------------------------------------------------
+
+1.Bind 1 DSA port to idxd driver and 1 NIC port to vfio-pci driver::
+
+   <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 29:00.0
+
+   ls /dev/dsa #check wq configure, reset if exist
+   <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+   <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+   ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+   ls /dev/dsa #check wq configure success
+
+2.Launch dma app with multi-queues::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a wq0.0 -a wq0.1 -- -p 0x1 -q 2 --mac-updating -c hw
+
+3. Send random ip packets (64B, 256B, 512B, 1024B, IMIX) from TG to NIC port.
+
+4. Check stats of dma app, "Worker Threads = 2, Copy Mode = hw, Rx Queues = 2" and each dma channel can enqueue packets.
+
+5. Repeat step2 to step4 with queue number 4 and qemu number 8, at the same time, reset and create WQ with the same number of queue numbers.
+Check performance gains status when queue numbers added.
+
+Test Case 11: DMA performance comparison between mac-updating and no-mac-updating using DSA kernel driver
+---------------------------------------------------------------------------------------------------------
+
+1.Bind 1 DSA port to idxd driver and 1 NIC port to vfio-pci driver::
+
+   <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 29:00.0
+
+   ls /dev/dsa #check wq configure, reset if exist
+   <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+   <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+   ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+   ls /dev/dsa #check wq configure success
+
+2.Launch dma app::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-1 -n 2 -a 0000:29:00.0 -a wq0.0 -a wq0.1 -- -p 0x1 -q 2 --no-mac-updating -c hw
+
+3. Send random ip 64B packets from TG.
+
+4. Check performance from dma app::
+
+    Total packets Tx:                   xxx [pps]
+
+5.Launch dma app::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-1 -n 2 -a 0000:29:00.0 -a wq0.0 -a wq0.1 -- -p 0x1 -q 2 --mac-updating -c hw
+
+6. Send random ip 64B packets from TG.
+
+7. Check performance from dma app::
+
+    Total packets Tx:                   xxx [pps]
+
+Test Case 12: DMA performance comparison between SW copies and HW copies using DSA kernel driver  
+------------------------------------------------------------------------------------------------
+
+1.Bind 1 DSA port to idxd driver and 1 NIC port to vfio-pci driver::
+
+   <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 29:00.0
+
+   ls /dev/dsa #check wq configure, reset if exist
+   <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+   <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+   ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0
+   ls /dev/dsa #check wq configure success
+
+2.Launch dma app with SW mode::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a wq0.0 -a wq0.1 -a wq0.2 -a wq0.3 -- -p 0x1 -q 4 --mac-updating  -c sw
+
+3. Send random ip packets with different packet size,includes [64, 128, 256, 512, 1024, 1518] from TG.
+
+4. Check performance from dma app::
+
+    Total packets Tx:                   xxx [pps]
+
+5.Launch dma app with HW mode::
+
+   ./x86_64-native-linuxapp-gcc/examples/dpdk-dma -l 0-2 -n 2 -a 0000:29:00.0 -a wq0.0 -a wq0.1 -a wq0.2 -a wq0.3 -- -p 0x1 -q 4 --mac-updating -c hw
+
+6. Send random ip packets with different packet size,includes [64, 128, 256, 512, 1024, 1518] from TG.
+
+7. Check performance from dma app and compare with hw copy test::
+
+    Total packets Tx:                   xxx [pps]
-- 
2.25.1


                 reply	other threads:[~2023-03-10  7:52 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230310075222.1462859-1-weix.ling@intel.com \
    --to=weix.ling@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).