* [DTS][PATCH V2] tests/vf_vlan: Add avx512 support for vf vlan validation.
@ 2023-03-22 3:48 Ke Xu
0 siblings, 0 replies; only message in thread
From: Ke Xu @ 2023-03-22 3:48 UTC (permalink / raw)
To: dts; +Cc: ke1.xu, lijuan.tu, yux.jiang
In DPDK v23.03, avx512 offload path is updated to support checksum offload. This modification involves VF VLAN offload and requires avx512 regression to cover. This patch is to introduce avx512 cases to support the regression requirements.
Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
tests/TestSuite_vf_vlan.py | 89 ++++++++++++++++++++++++++++++++------
1 file changed, 76 insertions(+), 13 deletions(-)
diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
index f2a59b18..20868bf6 100644
--- a/tests/TestSuite_vf_vlan.py
+++ b/tests/TestSuite_vf_vlan.py
@@ -168,23 +168,36 @@ class TestVfVlan(TestCase):
def launch_testpmd(self, **kwargs):
dcf_flag = kwargs.get("dcf_flag")
+ force_max_simd_bitwidth = kwargs.get("force-max-simd-bitwidth")
param = kwargs.get("param") if kwargs.get("param") else ""
+ eal_param = ""
# for dcf mode, the vlan offload support in scalar path
if dcf_flag:
+ eal_param += " --force-max-simd-bitwidth=64 "
+ eal_param += " --log-level='dcf,8' "
self.vm0_testpmd.start_testpmd(
VM_CORES_MASK,
ports=[self.vf0_guest_pci, self.vf1_guest_pci],
param=param,
- eal_param="--force-max-simd-bitwidth=64",
+ eal_param=eal_param,
port_options={
self.vf0_guest_pci: "cap=dcf",
self.vf1_guest_pci: "cap=dcf",
},
)
else:
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK, param=param)
+ if force_max_simd_bitwidth:
+ eal_param += " --force-max-simd-bitwidth=%d " % force_max_simd_bitwidth
+ param += " --enable-rx-cksum "
+ if self.kdriver == "ice" or self.kdriver == "i40e":
+ eal_param += " --log-level='iavf,8' "
+ elif self.kdriver == "ixgbe" or self.kdriver == "igbe":
+ eal_param += " --log-level='%svf,8' " % self.kdriver
+ self.vm0_testpmd.start_testpmd(
+ VM_CORES_MASK, param=param, eal_param=eal_param
+ )
- def test_pvid_vf_tx(self):
+ def execute_pvid_vf_tx(self, specific_bitwidth=None):
"""
Add port based vlan on vf device and check vlan tx work
"""
@@ -199,7 +212,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports("any")
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.launch_testpmd(dcf_flag=self.dcf_mode)
+ self.launch_testpmd(
+ dcf_flag=self.dcf_mode,
+ force_max_simd_bitwidth=specific_bitwidth,
+ )
self.vm0_testpmd.execute_cmd("set fwd mac")
self.vm0_testpmd.execute_cmd("start")
@@ -215,6 +231,12 @@ class TestVfVlan(TestCase):
# disable pvid
self.dut.send_expect("ip link set %s vf 0 vlan 0" % (self.host_intf0), "# ")
+ def test_pvid_vf_tx(self):
+ self.execute_pvid_vf_tx()
+
+ def test_pvid_vf_tx_avx512(self):
+ self.execute_pvid_vf_tx(specific_bitwidth=512)
+
def send_and_getout(self, vlan=0, pkt_type="UDP"):
if pkt_type == "UDP":
@@ -230,7 +252,7 @@ class TestVfVlan(TestCase):
return out
- def test_add_pvid_vf(self):
+ def execute_add_pvid_vf(self, specific_bitwidth=None):
random_vlan = random.randint(1, MAX_VLAN)
self.dut.send_expect(
@@ -243,7 +265,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports("any")
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.launch_testpmd(dcf_flag=self.dcf_mode)
+ self.launch_testpmd(
+ dcf_flag=self.dcf_mode,
+ force_max_simd_bitwidth=specific_bitwidth,
+ )
self.vm0_testpmd.execute_cmd("set fwd rxonly")
self.vm0_testpmd.execute_cmd("set verbose 1")
self.vm0_testpmd.execute_cmd("start")
@@ -269,7 +294,10 @@ class TestVfVlan(TestCase):
# restart testpmd
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.launch_testpmd(dcf_flag=self.dcf_mode)
+ self.launch_testpmd(
+ dcf_flag=self.dcf_mode,
+ force_max_simd_bitwidth=specific_bitwidth,
+ )
self.vm0_testpmd.execute_cmd("set fwd rxonly")
self.vm0_testpmd.execute_cmd("set verbose 1")
self.vm0_testpmd.execute_cmd("start")
@@ -298,6 +326,12 @@ class TestVfVlan(TestCase):
# disable pvid
self.dut.send_expect("ip link set %s vf 0 vlan 0" % (self.host_intf0), "# ")
+ def test_add_pvid_vf(self):
+ self.execute_add_pvid_vf()
+
+ def test_add_pvid_vf_avx512(self):
+ self.execute_add_pvid_vf(specific_bitwidth=512)
+
def tx_and_check(self, tx_vlan=1):
inst = self.tester.tcpdump_sniff_packets(self.tester_intf0)
self.vm0_testpmd.execute_cmd("set burst 1")
@@ -313,7 +347,7 @@ class TestVfVlan(TestCase):
self.verify(tx_vlan in vlans, "Tx packet with vlan not received!!!")
- def test_vf_vlan_tx(self):
+ def execute_vf_vlan_tx(self, specific_bitwidth=None):
self.verify(self.kdriver not in ["ixgbe"], "NIC Unsupported: " + str(self.nic))
random_vlan = random.randint(1, MAX_VLAN)
tx_vlans = [1, random_vlan, MAX_VLAN]
@@ -321,7 +355,10 @@ class TestVfVlan(TestCase):
self.vm0_dut_ports = self.vm_dut_0.get_ports("any")
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.launch_testpmd(dcf_flag=self.dcf_mode)
+ self.launch_testpmd(
+ dcf_flag=self.dcf_mode,
+ force_max_simd_bitwidth=specific_bitwidth,
+ )
self.vm0_testpmd.execute_cmd("set verbose 1")
for tx_vlan in tx_vlans:
@@ -339,7 +376,13 @@ class TestVfVlan(TestCase):
self.vm0_testpmd.quit()
- def test_vf_vlan_rx(self):
+ def test_vf_vlan_tx(self):
+ self.execute_vf_vlan_tx()
+
+ def test_vf_vlan_tx_avx512(self):
+ self.execute_vf_vlan_tx(specific_bitwidth=512)
+
+ def execute_vf_vlan_rx(self, specific_bitwidth=None):
random_vlan = random.randint(1, MAX_VLAN - 1)
rx_vlans = [1, random_vlan, MAX_VLAN]
# start testpmd in VM
@@ -351,7 +394,11 @@ class TestVfVlan(TestCase):
if not self.dcf_mode and self.kdriver is not "ixgbe"
else ""
)
- self.launch_testpmd(dcf_flag=self.dcf_mode, param=param)
+ self.launch_testpmd(
+ dcf_flag=self.dcf_mode,
+ param=param,
+ force_max_simd_bitwidth=specific_bitwidth,
+ )
self.vm0_testpmd.execute_cmd("set fwd rxonly")
self.vm0_testpmd.execute_cmd("set verbose 1")
self.vm0_testpmd.execute_cmd("vlan set strip on 0")
@@ -423,7 +470,13 @@ class TestVfVlan(TestCase):
self.vm0_testpmd.quit()
- def test_vf_vlan_strip(self):
+ def test_vf_vlan_rx_scalar(self):
+ self.execute_vf_vlan_rx()
+
+ def test_vf_vlan_rx_avx512(self):
+ self.execute_vf_vlan_rx(specific_bitwidth=512)
+
+ def execute_vf_vlan_strip(self, specific_bitwidth=None):
random_vlan = random.randint(1, MAX_VLAN - 1)
rx_vlans = [1, random_vlan, MAX_VLAN]
# start testpmd in VM
@@ -436,7 +489,11 @@ class TestVfVlan(TestCase):
else ""
)
- self.launch_testpmd(dcf_flag=self.dcf_mode, param=param)
+ self.launch_testpmd(
+ dcf_flag=self.dcf_mode,
+ param=param,
+ force_max_simd_bitwidth=specific_bitwidth,
+ )
self.vm0_testpmd.execute_cmd("set fwd rxonly")
self.vm0_testpmd.execute_cmd("set verbose 1")
self.vm0_testpmd.execute_cmd("start")
@@ -469,6 +526,12 @@ class TestVfVlan(TestCase):
self.vm0_testpmd.quit()
+ def test_vf_vlan_strip(self):
+ self.execute_vf_vlan_strip()
+
+ def test_vf_vlan_strip_avx512(self):
+ self.execute_vf_vlan_strip(specific_bitwidth=512)
+
def tear_down(self):
self.destroy_vm_env()
--
2.25.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-03-22 3:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-22 3:48 [DTS][PATCH V2] tests/vf_vlan: Add avx512 support for vf vlan validation Ke Xu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).