[dts][PATCH V1 0/3] add ice_iavf_checksum_perf test suite

[dts][PATCH V1 0/3] add ice_iavf_checksum_perf test suite

[Yingya Han]

Yingya Han (3):
  add ice_iavf_checksum_perf test plan
  add ice_iavf_checksum_perf test script
  add ice_iavf_checksum_perf configuration file

 conf/ice_iavf_checksum_perf.cfg               |   6 +
 .../ice_iavf_checksum_perf_test_plan.rst      | 224 +++++++++++
 test_plans/index.rst                          |   1 +
 tests/TestSuite_ice_iavf_checksum_perf.py     | 358 ++++++++++++++++++
 4 files changed, 589 insertions(+)
 create mode 100644 conf/ice_iavf_checksum_perf.cfg
 create mode 100644 test_plans/ice_iavf_checksum_perf_test_plan.rst
 create mode 100644 tests/TestSuite_ice_iavf_checksum_perf.py

-- 
2.34.1

[dts][PATCH V1 1/3]test_plans: add ice_iavf_checksum_perf test plan

[Yingya Han]

Signed-off-by: Yingya Han <yingyax.han@intel.com>
---
 .../ice_iavf_checksum_perf_test_plan.rst      | 224 ++++++++++++++++++
 test_plans/index.rst                          |   1 +
 2 files changed, 225 insertions(+)
 create mode 100644 test_plans/ice_iavf_checksum_perf_test_plan.rst

diff --git a/test_plans/ice_iavf_checksum_perf_test_plan.rst b/test_plans/ice_iavf_checksum_perf_test_plan.rst
new file mode 100644
index 00000000..891a6536
--- /dev/null
+++ b/test_plans/ice_iavf_checksum_perf_test_plan.rst
@@ -0,0 +1,224 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+   Copyright(c) 2023 Intel Corporation
+
+===============================================================
+Benchmark the performance of iavf checksum forwarding with E810
+===============================================================
+
+Description
+===========
+
+Prerequisites
+=============
+
+1. Hardware:
+
+   1.1) vf checksum perf test for Intel® Ethernet Network Adapter E810-CQDA2:
+        1 NIC or 2 NIC cards attached to the same processor and 1 port used of each NIC.
+   1.2) vf checksum perf test for Intel® Ethernet Network Adapter E810-XXVDA4:
+        1 NIC card attached to the processor and 4 ports used.
+
+2. Software::
+
+    dpdk: git clone http://dpdk.org/git/dpdk
+    trex: git clone http://trex-tgn.cisco.com/trex/release/v2.93.tar.gz
+
+
+Test Case
+=========
+The test case check the throughput result with ipv4, in the case,
+we will send the bi-direction flows with line rate, then we can check the
+passthrough rate.
+
+Common Steps
+------------
+1. Bind PF ports to kernel driver(ice), then create 1 VF from each PF,
+   take E810-CQDA2 for example::
+
+    echo 1 > /sys/bus/pci/devices/0000\:17\:00.0/sriov_numvfs
+    echo 1 > /sys/bus/pci/devices/0000\:4b\:00.0/sriov_numvfs
+
+2. Ip link set VF trust on and spoofchk off on DUT::
+
+    ip link set $PF_INTF vf 0 trust on
+    ip link set $PF_INTF vf 0 spoofchk off
+
+3. Set vf mac address::
+
+    ip link set ens5f0 vf 0 mac 00:12:34:56:78:01
+    ip link set ens6f0 vf 0 mac 00:12:34:56:78:02
+
+4. Bind tested ports to vfio-pci::
+
+    <dpdk_dir>#./usertools/dpdk-devbind.py -s
+    0000:17:00.0 'Device 1592' if=ens5f0 drv=ice unused=vfio-pci
+    0000:4b:00.0 'Device 1592' if=ens6f0 drv=ice unused=vfio-pci
+    <dpdk_dir>#./usertools/dpdk-devbind.py -b vfio-pci <pci device id>
+    <dpdk_dir>#./usertools/dpdk-devbind.py -b vfio-pci 0000:17:01.0
+    <dpdk_dir>#./usertools/dpdk-devbind.py -b vfio-pci 0000:4b:01.0
+
+5. Configure traffic generator to send traffic
+
+    Test flow MAC table.
+
+    +------+---------+------------+----------------+
+    | Flow | Traffic | MAC        | MAC            |
+    |      | Gen.    | Src.       | Dst.           |
+    |      | Port    | Address    | Address        |
+    +======+=========+============+================+
+    |   1  |   TG0   | Random MAC | 00:12:34:56:01 |
+    +------+---------+------------+----------------+
+    |   2  |   TG1   | Random Mac | 00:12:34:56:02 |
+    +------+---------+------------+----------------+
+
+    The Flow IP table.
+
+    +------+---------+------------+------------+
+    | Flow | Traffic | IPV4       | IPV4       |
+    |      | Gen.    | Src.       | Dest.      |
+    |      | Port    | Address    | Address    |
+    +======+=========+============+============+
+    |   1  |   TG0   | Any IP     | 198.18.1.0 |
+    +------+---------+------------+------------+
+    |   2  |   TG1   | Any IP     | 198.18.0.0 |
+    +------+---------+------------+------------+
+
+    Set the packet length : 128 bytes-1518 bytes
+    The IPV4 Dest Address increase with the num 1024.
+
+6. Test results table.
+
+    +-----------+------------+-------------+---------+
+    |  Fwd_core | Frame Size |  Throughput |   Rate  |
+    +===========+============+=============+=========+
+    |  1C/1T    |    128     |  xxxxx Mpps |   xxx % |
+    +-----------+------------+-------------+---------+
+    |  1C/1T    |   ...      |  xxxxx Mpps |   xxx % |
+    +-----------+------------+-------------+---------+
+
+Test Case 1: test_perf_enable_SW_checksum_offload
+-------------------------------------------------
+test steps
+~~~~~~~~~~
+1. Bind VF ports to dpdk driver as common step 4::
+
+    ./usertools/dpdk-devbind.py -b vfio-pci 17:01.0 4b:01.0
+
+2. Start dpdk-testpmd::
+
+     <build_dir>/app/dpdk-testpmd -l 5,6 -n 8 --force-max-simd-bitwidth=512 \
+     -- -i --portmask=0x3 --rxq=1 --txq=1 --txd=1024 --rxd=1024 --forward=io \
+     --nb-cores=1 --enable-rx-cksum
+
+    Note:
+      -force-max-simd-bitwidth: set 512
+      -enable-rx-cksum: enable rx checksum
+
+3. Configure traffic generator to send traffic as common step 5.
+
+4. Record Test results as common step 6.
+
+5. Config SW checksum offload::
+
+    testpmd>stop
+    testpmd>set fwd csum
+    testpmd>port stop all
+    testpmd>csum set ip sw 0
+    testpmd>csum set ip sw 1
+    testpmd>port start all
+    testpmd>start
+
+6. Configure traffic generator to send traffic as common step 5.
+
+    Set the incorrect ipv4 checksum.
+
+7. Record Test results as common step 6.
+
+8. Set the traffic flow as below:
+
+    Ether / IPv4 / UDP / VXLAN / Ether / IPv4 / UDP / payload
+
+    Set the packet length : 128 bytes-1518 bytes.
+
+    Set the inner and outer incorrect ipv4 checksum and udp checksum.
+
+9. Record Test results as common step 6.
+
+
+Test Case 2: test_perf_enable_HW_checksum_offload
+-------------------------------------------------
+test steps
+~~~~~~~~~~
+
+1. Bind VF ports to dpdk driver as common step 4::
+
+    ./usertools/dpdk-devbind.py -b vfio-pci 17:01.0 4b:01.0
+
+2. Start dpdk-testpmd::
+
+     <build_dir>/app/dpdk-testpmd -l 5,6 -n 8 --force-max-simd-bitwidth=512 \
+     -- -i --portmask=0x3 --rxq=1 --txq=1 --txd=1024 --rxd=1024 --forward=io \
+     --nb-cores=1 --enable-rx-cksum
+
+    Note:
+      -force-max-simd-bitwidth: set 512
+      -enable-rx-cksum: enable rx checksum
+
+3. Config HW checksum offload::
+
+    testpmd>stop
+    testpmd>set fwd csum
+    testpmd>port stop all
+    testpmd>csum set ip hw 0
+    testpmd>csum set ip hw 1
+    testpmd>port start all
+    testpmd>set promisc all on
+    testpmd>start
+
+4. Configure traffic generator to send traffic as common step 5.
+
+    Set the incorrect ipv4 checksum.
+
+5. Record Test results as common step 6.
+
+6. Set the traffic flow as below:
+
+    Ether / IPv4 / UDP / VXLAN / Ether / IPv4 / UDP / payload
+
+    Set the packet length : 128 bytes-1518 bytes.
+
+    Set the inner and outer incorrect ipv4 checksum and udp checksum.
+
+7. Record Test results as common step 6.
+
+8. Set HW inner and outer checksum offload::
+
+    testpmd>stop
+    testpmd>port stop all
+    testpmd>csum set udp hw 0
+    testpmd>csum set udp hw 1
+    testpmd>csum set outer-ip hw 0
+    testpmd>csum set outer-ip hw 1
+    testpmd>csum set outer-udp hw 0
+    testpmd>csum set outer-udp hw 1
+    testpmd>csum parse-tunnel on 0
+    testpmd>csum parse-tunnel on 1
+    testpmd>port start all
+    testpmd>set promisc all on
+    testpmd>start
+
+9. Configure traffic generator to send traffic as common step 5.
+
+    Set the incorrect ipv4 checksum.
+
+10. Record Test results as common step 6.
+
+11. Set the traffic flow as below:
+
+    Ether / IPv4 / UDP / VXLAN / Ether / IPv4 / UDP / payload
+
+    Set the packet length : 128 bytes-1518 bytes.
+
+    Set the inner and outer incorrect ipv4 checksum and udp checksum.
+
+12. Record Test results as common step 6.
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 2008f50b..3a91799e 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -43,6 +43,7 @@ The following are the test plans for the DPDK DTS automated test system.
     ice_fdir_test_plan
     ice_rx_timestamp_test_plan
     ice_ip_fragment_rte_flow_test_plan
+    ice_iavf_checksum_perf_test_plan
     ice_iavf_flow_subscribe_test_plan
     ice_iavf_ip_fragment_rte_flow_test_plan
     ice_iavf_packet_pacing_test_plan
-- 
2.34.1

[dts][PATCH V1 2/3]tests: add ice_iavf_checksum_perf test script

[Yingya Han]

Signed-off-by: Yingya Han <yingyax.han@intel.com>
---
 tests/TestSuite_ice_iavf_checksum_perf.py | 358 ++++++++++++++++++++++
 1 file changed, 358 insertions(+)
 create mode 100644 tests/TestSuite_ice_iavf_checksum_perf.py

diff --git a/tests/TestSuite_ice_iavf_checksum_perf.py b/tests/TestSuite_ice_iavf_checksum_perf.py
new file mode 100644
index 00000000..2798cade
--- /dev/null
+++ b/tests/TestSuite_ice_iavf_checksum_perf.py
@@ -0,0 +1,358 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2023 Intel Corporation
+#
+
+"""
+DPDK Test suite.
+"""
+
+import os
+import re
+import time
+
+from framework.exception import VerifyFailure
+from framework.pktgen import PacketGeneratorHelper
+from framework.pmd_output import PmdOutput
+from framework.settings import HEADER_SIZE
+from framework.test_case import TestCase
+
+
+class TestIceIavfChecksumPerf(TestCase):
+    def set_up_all(self):
+        """
+        Run at the start of each test suite.
+        PMD prerequisites.
+        """
+        self.verify(
+            self.nic
+            in ["ICE_100G-E810C_QSFP", "ICE_25G-E810C_SFP", "ICE_25G-E810_XXV_SFP"],
+            "NIC Unsupported: " + str(self.nic),
+        )
+        self.dut_ports = self.dut.get_ports(self.nic)
+        self.verify(len(self.dut_ports) >= 1, "At least 1 port is required to test")
+        self.socket = self.dut.get_numa_id(self.dut_ports[0])
+
+        self.core_offset = 3
+        self.test_content = self.get_test_content_from_cfg(self.get_suite_cfg())
+        # Get dts output path
+        if self.logger.log_path.startswith(os.sep):
+            self.output_path = self.logger.log_path
+        else:
+            cur_path = os.path.dirname(os.path.dirname(os.path.realpath(__file__)))
+            self.output_path = os.sep.join([cur_path, self.logger.log_path])
+        self.vfs_mac = ["00:12:34:56:78:0%d" % (i + 1) for i in self.dut_ports]
+        self.pmdout = PmdOutput(self.dut)
+        # Create an instance to set stream field setting
+        self.pktgen_helper = PacketGeneratorHelper()
+
+    def set_up(self):
+        """
+        Run before each test case.
+        It's more convenient to load suite configuration here than
+        set_up_all in debug mode.
+        """
+        self.test_result = {"header": [], "date": []}
+        self.vf_port_info = {}
+
+    def parse_test_config(self, config):
+        """
+        [n]C/[mT]-[i]Q
+            n: how many physical core use for polling.
+            m: how many cpu thread use for polling, if Hyper-threading disabled
+            in BIOS, m equals n, if enabled, m is 2 times as n.
+            i: how many queues use per port, so total queues = i x nb_port
+        """
+        pat = "(.*)/(.*)-(.*)"
+        result = re.findall(pat, config)
+        if not result:
+            msg = f"{config} is wrong format, please check"
+            raise VerifyFailure(msg)
+        cores, threads, queue = result[0]
+        _thread_num = int(int(threads[:-1]) // int(cores[:-1]))
+
+        _thread = str(_thread_num) + "T"
+        _cores = str(self.core_offset + int(cores[:-1])) + "C"
+        cores_config = "/".join(["1S", _cores, _thread])
+        queues_per_port = int(queue[:-1])
+        return cores_config, _thread_num, queues_per_port
+
+    def get_test_configs(self, test_parameters):
+        configs = []
+        frame_sizes_grp = []
+        for test_item, frame_sizes in sorted(test_parameters.items()):
+            _frame_sizes = [int(frame_size) for frame_size in frame_sizes]
+            frame_sizes_grp.extend([int(item) for item in _frame_sizes])
+            cores, thread_num, queues = self.parse_test_config(test_item)
+            corelist = self.dut.get_core_list(cores, self.socket)
+            core_list = corelist[(self.core_offset - 1) * thread_num :]
+            if "2T" in cores:
+                core_list = core_list[1:2] + core_list[0::2] + core_list[1::2][1:]
+            _core_list = core_list[thread_num - 1 :]
+            configs.append(
+                [
+                    test_item,
+                    _core_list,
+                    [
+                        " --txd=1024 --rxd=1024"
+                        + " --rxq={0} --txq={0}".format(queues)
+                        + " --nb-cores={}".format(len(core_list) - thread_num)
+                        + " --enable-rx-cksum"
+                    ],
+                ]
+            )
+        return configs, sorted(set(frame_sizes_grp))
+
+    def get_test_content_from_cfg(self, test_content):
+        configs, frame_sizes = self.get_test_configs(test_content["test_parameters"])
+        test_content["configs"] = configs
+        test_content["frame_sizes"] = frame_sizes
+        return test_content
+
+    def vf_create(self):
+        """
+        Require enough PF ports, create 1 VF from each PF.
+        """
+        # Get vf assign method
+        vf_driver = self.test_content.get("vf_driver")
+        if vf_driver is None:
+            vf_driver = self.drivername
+        for port_id in self.dut_ports:
+            pf_driver = self.dut.ports_info[port_id]["port"].default_driver
+            self.dut.generate_sriov_vfs_by_port(port_id, 1, driver=pf_driver)
+            pf_pci = self.dut.ports_info[port_id]["port"].pci
+            sriov_vfs_port = self.dut.ports_info[port_id].get("vfs_port")
+            if not sriov_vfs_port:
+                msg = f"failed to create vf on dut port {pf_pci}"
+                self.logger.error(msg)
+                continue
+            self.vf_port_info[port_id] = {
+                "pf_pci": pf_pci,
+                "vf_pci": self.dut.ports_info[port_id]["port"].get_sriov_vfs_pci(),
+            }
+            pf_intf = self.dut.ports_info[port_id]["intf"]
+            # Set vf mac
+            self.dut.send_expect(
+                "ip link set %s vf 0 mac %s" % (pf_intf, self.vfs_mac[port_id]), "#"
+            )
+            self.dut.send_expect("ip link set %s vf 0 trust on" % pf_intf, "#")
+            self.dut.send_expect("ip link set %s vf 0 spoofchk off" % pf_intf, "#")
+            # Bind vf to dpdk
+            try:
+                for port in sriov_vfs_port:
+                    port.bind_driver(driver=vf_driver)
+            except Exception as e:
+                self.vf_destroy()
+                raise Exception(e)
+
+    def vf_destroy(self):
+        """
+        Destroy the setup VFs
+        """
+        if not self.vf_port_info:
+            return
+        for port_id, _ in self.vf_port_info.items():
+            self.dut.destroy_sriov_vfs_by_port(port_id)
+            self.dut.ports_info[port_id]["port"].bind_driver(self.drivername)
+        self.vf_port_info = None
+
+    def checksum_enable(self, csum, csum_config):
+        self.dut.send_expect("stop", "testpmd> ", 15)
+        self.dut.send_expect("set fwd csum", "testpmd> ", 15)
+        self.dut.send_expect("port stop all", "testpmd> ", 15)
+        for port_id in self.dut_ports:
+            self.dut.send_expect("csum set ip %s %d" % (csum, port_id), "testpmd> ", 15)
+            if csum_config:
+                self.dut.send_expect(
+                    "csum set udp %s %d" % (csum, port_id), "testpmd> ", 15
+                )
+                self.dut.send_expect(
+                    "csum set outer-ip %s %d" % (csum, port_id), "testpmd> ", 15
+                )
+                self.dut.send_expect(
+                    "csum set outer-udp %s %d" % (csum, port_id), "testpmd> ", 15
+                )
+                self.dut.send_expect(
+                    "csum set parse-tunnel on %d" % (port_id), "testpmd> ", 15
+                )
+        self.dut.send_expect("port start all", "testpmd> ", 15)
+        if csum == "hw":
+            self.dut.send_expect("set promisc all on", "testpmd> ", 15)
+
+    def start_testpmd(self, core_list, pci_para, eal, csum, csum_config):
+        self.pmdout.start_testpmd(core_list, eal, pci_para, socket=self.socket)
+        if csum:
+            self.checksum_enable(csum, csum_config)
+        self.dut.send_expect("start", "testpmd> ", 15)
+
+    def create_pcaps_file(self, frame_size, pkt_type):
+        """
+        Prepare traffic flow
+        """
+        if pkt_type == "vxlan":
+            headers_size = sum(
+                [
+                    HEADER_SIZE[x]
+                    for x in ["eth", "ip", "udp", "vxlan", "eth", "ip", "udp"]
+                ]
+            )
+        else:
+            headers_size = sum([HEADER_SIZE[x] for x in ["eth", "ip"]])
+        payload_size = frame_size - headers_size
+        pcaps = {}
+        # Modify the incorrect checksum of IP and UDP for inner and outer.
+        for _port in self.dut_ports:
+            if 1 == len(self.dut_ports):
+                if pkt_type == "vxlan":
+                    flow = [
+                        'Ether(dst="%s")/IP(dst="192.18.1.%d",chksum=1)/UDP(chksum=1)/VXLAN(vni=0x1)/Ether()/IP(dst="192.18.%d.0,chksum=1)/UDP(chksum=1)/("X"*%d)'
+                        % (self.vfs_mac[_port], _port, _port, payload_size)
+                    ]
+                else:
+                    flow = [
+                        'Ether(dst="%s")/IP(dst="192.18.1.%d",chksum=1)/("X"*%d)'
+                        % (self.vfs_mac[_port], _port, payload_size)
+                    ]
+                pcap = os.sep.join([self.output_path, "dst{0}.pcap".format(_port)])
+                self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, ",".join(flow)))
+                self.tester.scapy_execute()
+                pcaps[_port] = []
+                pcaps[_port].append(pcap)
+            else:
+                cnt = 0
+                for i in range(len(self.dut_ports) ** 2)[_port * 2 : (_port + 1) * 2]:
+                    if pkt_type == "vxlan":
+                        flow = [
+                            'Ether(dst="%s")/IP(dst="192.18.%d.%d",chksum=1)/UDP(chksum=1)/VXLAN(vni=0x1)/Ether()/IP(dst="192.18.%d.0",chksum=1)/UDP(chksum=1)/("X"*%d)'
+                            % (self.vfs_mac[_port], i, _port, i + 1, payload_size)
+                        ]
+                    else:
+                        flow = [
+                            'Ether(dst="%s")/IP(dst="192.18.%d.%d",chksum=1)/("X"*%d)'
+                            % (self.vfs_mac[_port], i, _port, payload_size)
+                        ]
+                    pcap = os.sep.join(
+                        [self.output_path, "dst{0}_{1}.pcap".format(_port, cnt)]
+                    )
+                    self.tester.scapy_append(
+                        'wrpcap("%s", [%s])' % (pcap, ",".join(flow))
+                    )
+                    self.tester.scapy_execute()
+                    if _port not in pcaps:
+                        pcaps[_port] = []
+                    pcaps[_port].append(pcap)
+                    cnt += 1
+        return pcaps
+
+    def prepare_stream(self, pcaps):
+        """
+        Create streams for ports, one port one stream
+        """
+        tgen_input = []
+        port_num = len(self.dut_ports)
+        if 1 == port_num:
+            txIntf = self.tester.get_local_port(self.dut_ports[0])
+            rxIntf = txIntf
+            for pcap in pcaps[0]:
+                tgen_input.append((txIntf, rxIntf, pcap))
+        else:
+            for rxPort in self.dut_ports:
+                if rxPort % port_num == 0 or rxPort ** 2 == port_num:
+                    txIntf = self.tester.get_local_port(self.dut_ports[rxPort + 1])
+                    port_id = self.dut_ports[rxPort + 1]
+                else:
+                    txIntf = self.tester.get_local_port(self.dut_ports[rxPort - 1])
+                    port_id = self.dut_ports[rxPort - 1]
+                rxIntf = self.tester.get_local_port(self.dut_ports[rxPort])
+                for pcap in pcaps[port_id]:
+                    tgen_input.append((txIntf, rxIntf, pcap))
+        return tgen_input
+
+    def throughput(self, frame_size, pkt_type):
+        pcaps = self.create_pcaps_file(frame_size, pkt_type)
+        tgenInput = self.prepare_stream(pcaps)
+        # Get traffic option
+        duration = self.test_content.get("test_duration")
+        traffic_stop_wait_time = self.test_content.get("traffic_stop_wait_time", 0)
+        vm_config = self.set_fields()
+        # Clear streams before add new streams
+        self.tester.pktgen.clear_streams()
+        streams = self.pktgen_helper.prepare_stream_from_tginput(
+            tgenInput, 100, vm_config, self.tester.pktgen
+        )
+        # Set traffic option
+        traffic_option = {
+            "method": "throughput",
+            "duration": duration,
+        }
+        # Run packet generator
+        result = self.tester.pktgen.measure(streams, traffic_option)
+        time.sleep(traffic_stop_wait_time)
+        # Statistics result
+        _, pps = result
+        self.verify(pps > 0, "No traffic detected")
+        pps /= 1000000
+        self.logger.info(
+            "Throughput of " + "framesize: {}, is: {} Mpps".format(frame_size, pps)
+        )
+        return pps
+
+    def perf_test(self, csum="", csum_config="", pkt_type="ipv4"):
+        """
+        Performance Benchmarking test
+        """
+        pci_para = ""
+        for port_id in self.dut_ports:
+            pci_para += " -a " + self.vf_port_info[port_id]["vf_pci"][0]
+        results = []
+
+        for config, core_list, eal in self.test_content["configs"]:
+            self.logger.info(
+                ("Executing Test Using cores: {0} of config {1}, ").format(
+                    core_list, config
+                )
+            )
+            self.start_testpmd(core_list, pci_para, eal[0], csum, csum_config)
+            for frame_size in self.test_content["frame_sizes"]:
+                self.logger.info("Test running at framesize: {}".format(frame_size))
+                result = self.throughput(frame_size, pkt_type)
+                if result:
+                    results.append([config, frame_size, result])
+
+            self.dut.send_expect("stop", "testpmd> ", 15)
+            self.dut.send_expect("quit", "# ", 15)
+
+    def test_perf_enable_sw_checksum_offload(self):
+        self.vf_create()
+        self.perf_test()
+        self.perf_test(csum="sw", pkt_type="ipv4")
+        self.perf_test(csum="sw", pkt_type="vxlan")
+
+    def test_perf_enable_hw_checksum_offload(self):
+        self.vf_create()
+        self.perf_test(csum="hw", pkt_type="ipv4")
+        self.perf_test(csum="hw", pkt_type="vxlan")
+        self.perf_test(csum="hw", csum_config="all", pkt_type="ipv4")
+        self.perf_test(csum="hw", csum_config="all", pkt_type="vxlan")
+
+    def set_fields(self):
+        """
+        Set ip protocol field behavior
+        """
+        fields_config = {
+            "ip": {
+                "src": {"action": "random"},
+            },
+        }
+        return fields_config
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.vf_destroy()
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        self.dut.kill_all()
-- 
2.34.1

[dts][PATCH V1 3/3]conf: add ice_iavf_checksum_perf configuration file

[Yingya Han]

Signed-off-by: Yingya Han <yingyax.han@intel.com>
---
 conf/ice_iavf_checksum_perf.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/ice_iavf_checksum_perf.cfg

diff --git a/conf/ice_iavf_checksum_perf.cfg b/conf/ice_iavf_checksum_perf.cfg
new file mode 100644
index 00000000..19dcb5ee
--- /dev/null
+++ b/conf/ice_iavf_checksum_perf.cfg
@@ -0,0 +1,6 @@
+[suite]
+test_duration = 30
+traffic_stop_wait_time = 2
+test_parameters = {
+    '1C/1T-1Q': ['128', '256', '512', '1024', '1280', '1518',],
+    '1C/2T-2Q': ['128', '256', '512', '1024', '1280', '1518',],}
-- 
2.34.1

RE: [dts][PATCH V1 3/3]conf: add ice_iavf_checksum_perf configuration file

[Chu, Haijun]

Acked-by: Haijun Chu<haijun.chu@intel.com>

-----Original Message-----
From: Yingya Han <yingyax.han@intel.com> 
Sent: Thursday, April 13, 2023 5:18 PM
To: dts@dpdk.org
Cc: Han, YingyaX <yingyax.han@intel.com>
Subject: [dts][PATCH V1 3/3]conf: add ice_iavf_checksum_perf configuration file

Signed-off-by: Yingya Han <yingyax.han@intel.com>
---