* [dts] [PATCH V1]test_plans/cvl_dcf_qos: add del node and qos configuration ownership
@ 2021-10-14 19:16 Peng Yuan
2021-10-26 5:19 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Peng Yuan @ 2021-10-14 19:16 UTC (permalink / raw)
To: dts; +Cc: Peng Yuan
Add del node case to test plan.
Add qos configuration ownership image to clarify the classification.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/cvl_dcf_qos_test_plan.rst b/test_plans/cvl_dcf_qos_test_plan.rst
index 482c2e3a..3d96a0f5 100644
--- a/test_plans/cvl_dcf_qos_test_plan.rst
+++ b/test_plans/cvl_dcf_qos_test_plan.rst
@@ -55,6 +55,27 @@ available BW (min, max) per TC etc. To be accomplished by way of new advance vir
Note: The AVF inherits TCs that are configured on the PF. DCF tunes the BW allocation per TC for the target AVF.
+QoS configuration ownership::
+
+ --------- --------- --------- --------- --------- --------- --------- ---------
+ | queue | | queue | | queue | | queue | ... | queue | | queue | | queue | | queue |
+ --------- --------- --------- --------- --------- --------- --------- ---------
+ |_________| |_________| |_________| |_________|
+ | | | |
+ --------- --------- --------- ---------
+ | VSI0 | | VSI1 | ... | VSI0 | | VSI1 |
+ --------- --------- --------- ---------
+ |____________________| |___________________|
+ | |
+ ------- -------
+ | TC0 | ... | TCn |
+ ------- -------
+ |____________________________________________|
+ |
+ --------
+ | ROOT |
+ --------
+
Prerequisites
=============
@@ -1176,12 +1197,37 @@ the case is to check the support to query QoS settings.
show port tm level cap 1 1
show port tm level cap 1 2
+ check shaper_private_rate_max are the same::
+
+ shaper_private_rate_max 12500000000
+
+ the value is speed of the port.
+ the shaper_private_rate_min is 0.
+
show port tm node capability::
show port tm node cap 1 900
show port tm node cap 1 800
- check all the unit of rate is consistent.
+ check shaper_private_rate_max and shaper_private_rate_min,
+ the TC node value is consistent to profile setting.
+ node 900::
+
+ cap.shaper_private_rate_min 1000000
+ cap.shaper_private_rate_max 2000000
+
+ node 800::
+
+ cap.shaper_private_rate_min 1000000
+ cap.shaper_private_rate_max 4000000
+
+ check all the unit of rate is consistent which is Bps.
+ show capability of node 0-7 for port 1::
+
+ show port tm node cap 1 1
+ node parameter null: not support capability get (error 22)
+
+ it's not supported by queue node.
4. show port tm node type::
@@ -1189,6 +1235,12 @@ the case is to check the support to query QoS settings.
show port tm node type 1 900
show port tm node type 1 1000
+ the result is::
+
+ leaf node
+ nonleaf node
+ nonleaf node
+
check the type is correct.
Test case 13: pf reset
@@ -1769,3 +1821,68 @@ the sum of the streams's throughput is limited by the tcbw distribution or peak_
only send steam 2 and 5 synchronously, the throughput is 4MBps, mapping queue 4-5
only send steam 3 and 7 synchronously, the throughput is 4MBps, mapping queue 6-7
send all the streams synchronously, the throughput is 10MBps, queue mapping is correct.
+
+Test case 20: delete qos setting
+================================
+the case is to check the support to delete QoS settings.
+
+1. DCB setting, set 3 TCs bandwidth with strict mode::
+
+ ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0
+ ifconfig ens785f0 up
+
+2. start testpmd with 100G setting, then set profile and TC mapping::
+
+ port stop all
+ add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0
+ add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0
+ add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0
+ add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0
+ add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0
+ add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0
+ add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0
+ add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0
+ add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0
+ add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0
+ add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0
+ add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0
+
+3. delete the shaper profile and nonleaf node::
+
+ del port tm node 0 1000
+ node id: cannot delete a node which has children (error 33)
+ del port tm node 0 700
+ node id: cannot delete a node which has children (error 33)
+ del port tm node shaper profile 0 1
+ shaper profile null: profile in use (error 10)
+
+ the nodes can't be deleted due to the children nodes.
+ delete the leaf nodes first, then delete the nonleaf nodes and shaper profile::
+
+ del port tm node 0 5
+ del port tm node 0 4
+ del port tm node 0 3
+ del port tm node 0 2
+ del port tm node 0 1
+ del port tm node 0 0
+ del port tm node 0 700
+ del port tm node 0 800
+ del port tm node 0 900
+ del port tm node 0 1000
+ del port tm node shaper profile 0 1
+ del port tm node shaper profile 0 2
+
+ deleted successfully.
+
+4. add the settings again as step2, then commit the configuration::
+
+ port tm hierarchy commit 0 no
+
+ delete the leaf node::
+
+ del port tm node 0 5
+ cause unspecified: already committed (error 1)
+
+ check the node can't be deleted after committed.
+
+5. all the operation has the same result on port 1.
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-26 5:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-14 19:16 [dts] [PATCH V1]test_plans/cvl_dcf_qos: add del node and qos configuration ownership Peng Yuan
2021-10-26 5:19 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).