test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v2] test_plans/pvp_multi_paths_vhost_max_efficiency: add test plan of pvp multi-paths for vhost max efficiency
@ 2019-01-10  0:51 Yinan
  2019-01-19  2:14 ` Yao, Lei A
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-01-10  0:51 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 ...i_paths_vhost_max_efficiency_test_plan.rst | 218 ++++++++++++++++++
 1 file changed, 218 insertions(+)
 create mode 100644 test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst

diff --git a/test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst b/test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst
new file mode 100644
index 0000000..bbeff3d
--- /dev/null
+++ b/test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst
@@ -0,0 +1,218 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=====================================
+PVP multi-paths vhost max efficiency Tests
+=====================================
+
+Description
+===========
+
+Benchmark vhost/virtio-user PVP performance with 7 TX/RX PATHs.
+Includes Mergeable, Normal, Vector_RX, Inorder mergeable,
+Inorder no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
+For vhost max efficiency,give 1 core for vhost and virtio respectively.
+
+Test Case 1: vhost/virtio-user pvp test with Virtio 1.1 mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 2: vhost/virtio-user pvp test with Virtio 1.1 no-mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 3: vhost/virtio-user pvp test with Inorder mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 4: vhost/virtio-user pvp test with Inorder no-mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 5: vhost/virtio-user pvp test with Mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 6: vhost/virtio-user pvp test with Normal path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 7: vhost/virtio-user pvp test with Vector_RX path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
-- 
2.17.1

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [dts] [PATCH v2] test_plans/pvp_multi_paths_vhost_max_efficiency: add test plan of pvp multi-paths for vhost max efficiency
  2019-01-10  0:51 [dts] [PATCH v2] test_plans/pvp_multi_paths_vhost_max_efficiency: add test plan of pvp multi-paths for vhost max efficiency Yinan
@ 2019-01-19  2:14 ` Yao, Lei A
  0 siblings, 0 replies; 2+ messages in thread
From: Yao, Lei A @ 2019-01-19  2:14 UTC (permalink / raw)
  To: Wang, Yinan, dts; +Cc: Wang, Yinan



> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Thursday, January 10, 2019 8:51 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v2]
> test_plans/pvp_multi_paths_vhost_max_efficiency: add test plan of pvp
> multi-paths for vhost max efficiency
The test plan name is a little confusing, seems the test topology is testing 
Virtio single core performance , not vhost.  

> 
> From: Wang Yinan <yinan.wang@intel.com>
> 
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
>  ...i_paths_vhost_max_efficiency_test_plan.rst | 218 ++++++++++++++++++
>  1 file changed, 218 insertions(+)
>  create mode 100644
> test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst
> 
> diff --git a/test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst
> b/test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst
> new file mode 100644
> index 0000000..bbeff3d
> --- /dev/null
> +++ b/test_plans/pvp_multi_paths_vhost_max_efficiency_test_plan.rst
> @@ -0,0 +1,218 @@
> +.. Copyright (c) <2019>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP multi-paths vhost max efficiency Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark vhost/virtio-user PVP performance with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable,
> +Inorder no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +For vhost max efficiency,give 1 core for vhost and virtio respectively.
> +
The description don't match the suite name. 
> +Test Case 1: vhost/virtio-user pvp test with Virtio 1.1 mergeable path
> +=========================================================
> ==============
Test case name don't match the test suite name. From this name , user will think
this is one normal PVP test, not vhost or virtio single core performance test 
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
The flow is not testing vhost max performance .  It should be
TG --> NIC --> virtio --> vhost--> virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
Seems nb-cores should be 2, if we are testing virtio single core 
performance

> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 2: vhost/virtio-user pvp test with Virtio 1.1 no-mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 3: vhost/virtio-user pvp test with Inorder mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 4: vhost/virtio-user pvp test with Inorder no-mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 5: vhost/virtio-user pvp test with Mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 6: vhost/virtio-user pvp test with Normal path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 7: vhost/virtio-user pvp test with Vector_RX path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-01-19  2:14 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-10  0:51 [dts] [PATCH v2] test_plans/pvp_multi_paths_vhost_max_efficiency: add test plan of pvp multi-paths for vhost max efficiency Yinan
2019-01-19  2:14 ` Yao, Lei A

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).