From: "Yao, Lei A" <lei.a.yao@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH 1/3] test_plans/pvp_multi_paths_performanc: add test plan of PVP multi-paths
Date: Wed, 13 Feb 2019 06:28:15 +0000 [thread overview]
Message-ID: <2DBBFF226F7CF64BAFCA79B681719D954964225B@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20190128023441.59299-1-yinan.wang@intel.com>
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, January 28, 2019 10:35 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH 1/3] test_plans/pvp_multi_paths_performanc: add
> test plan of PVP multi-paths
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
Acked-by: Lei Yao<lei.a.yao@intel.com>
> ---
> .../pvp_multi_paths_performance_test_plan.rst | 218
> ++++++++++++++++++
> 1 file changed, 218 insertions(+)
> create mode 100644
> test_plans/pvp_multi_paths_performance_test_plan.rst
>
> diff --git a/test_plans/pvp_multi_paths_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_performance_test_plan.rst
> new file mode 100644
> index 0000000..f6c10cd
> --- /dev/null
> +++ b/test_plans/pvp_multi_paths_performance_test_plan.rst
> @@ -0,0 +1,218 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP multi-paths performance Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark PVP multi-paths performance with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
> +no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +Give 1 core for vhost and virtio respectively.
> +
> +Test Case 1: pvp test with Virtio 1.1 mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 2: pvp test with Virtio 1.1 no-mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 3: pvp test with Inorder mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 4: pvp test with Inorder no-mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 5: pvp test with Mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 6: pvp test with Normal path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 7: pvp test with Vector_RX path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> \ No newline at end of file
> --
> 2.17.1
next prev parent reply other threads:[~2019-02-13 6:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 2:34 Yinan
2019-02-13 6:28 ` Yao, Lei A [this message]
2019-02-26 7:56 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2DBBFF226F7CF64BAFCA79B681719D954964225B@shsmsx102.ccr.corp.intel.com \
--to=lei.a.yao@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).