From: "Ling, WeiX" <weix.ling@intel.com>
To: "Ling, WeiX" <weix.ling@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V6] tests/virtio_smoke:add virtio smoke test suite sync with test plan
Date: Tue, 2 Feb 2021 07:51:31 +0000 [thread overview]
Message-ID: <4bc0a9af6cea4cacbc52d5b9edd0a055@intel.com> (raw)
In-Reply-To: <20210202152313.3878782-1-weix.ling@intel.com>
[-- Attachment #1: Type: text/plain, Size: 11204 bytes --]
Tested-by: Wei Ling <weix.ling@intel.com>
Regards,
Ling Wei
> -----Original Message-----
> From: Ling Wei <weix.ling@intel.com>
> Sent: Tuesday, February 2, 2021 11:23 PM
> To: dts@dpdk.org
> Cc: Ling, WeiX <weix.ling@intel.com>
> Subject: [dts][PATCH V6] tests/virtio_smoke:add virtio smoke test suite sync
> with test plan
>
> v1:
> Add virtio smoke test suite sync with test plan.
>
> v2:
> 1.Modiry Copyrint(c)<2019> to Copyrint(c)<2021>.
> 2.Fix CentOS check hugepagesize return ' 2048' dts issue.
> 3.Add test case run exception handing 'kill dpdk-testpmd'
> in set_up and tear_down.
>
> v3:
> Modify patch subject and comments description error.
>
> v4:
> Modify set_up method,kill testpmd then remove vhost-net*.
>
> v5:
> Fix patch spelling error.
>
> v6:
> Fix patch spelling error.
>
> Signed-off-by: Ling Wei <weix.ling@intel.com>
> ---
> tests/TestSuite_virtio_smoke.py | 202
> ++++++++++++++++++++++++++++++++
> 1 file changed, 202 insertions(+)
> create mode 100644 tests/TestSuite_virtio_smoke.py
>
> diff --git a/tests/TestSuite_virtio_smoke.py
> b/tests/TestSuite_virtio_smoke.py new file mode 100644 index
> 00000000..3c9e96fc
> --- /dev/null
> +++ b/tests/TestSuite_virtio_smoke.py
> @@ -0,0 +1,202 @@
> +# BSD LICENSE+#+# Copyright(c) <2021> Intel Corporation. All rights
> reserved.+# All rights reserved.+#+# Redistribution and use in source and
> binary forms, with or without+# modification, are permitted provided that
> the following conditions+# are met:+#+# * Redistributions of source code
> must retain the above copyright+# notice, this list of conditions and the
> following disclaimer.+# * Redistributions in binary form must reproduce the
> above copyright+# notice, this list of conditions and the following
> disclaimer in+# the documentation and/or other materials provided with
> the+# distribution.+# * Neither the name of Intel Corporation nor the
> names of its+# contributors may be used to endorse or promote products
> derived+# from this software without specific prior written
> permission.+#+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
> AND CONTRIBUTORS+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
> INCLUDING, BUT NOT+# LIMITED TO, THE IMPLIED WARRANTIES OF
> MERCHANTABILITY AND FITNESS FOR+# A PARTICULAR PURPOSE ARE
> DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT+# OWNER OR
> CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,+#
> SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS OF USE,+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
> CAUSED AND ON ANY+# THEORY OF LIABILITY, WHETHER IN CONTRACT,
> STRICT LIABILITY, OR TORT+# (INCLUDING NEGLIGENCE OR OTHERWISE)
> ARISING IN ANY WAY OUT OF THE USE+# OF THIS SOFTWARE, EVEN IF
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.++"""+DPDK Test
> suite.+"""++import re+from test_case import TestCase+from pmd_output
> import PmdOutput+DEFAULT_MTU = 1500+TSO_MTU = 9000++class
> TestVirtioSmoke(TestCase):+++ def set_up_all(self):+ """+ Run at
> the start of each test suite.+ """+ self.dst_mac = "00:01:02:03:04:05"+
> self.dut_ports = self.dut.get_ports()+ self.txItf =
> self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))+
> self.socket = self.dut.get_numa_id(self.dut_ports[0])+ self.cores =
> self.dut.get_core_list("all", socket=self.socket)+ self.vhost_cores =
> self.cores[0:3]+ self.virtio1_cores = self.cores[3:6]+ self.base_dir =
> self.dut.base_dir.replace('~', '/root')+ self.path =
> self.dut.apps_name['test-pmd']+ self.testpmd_name =
> self.path.split("/")[-1]+ self.vhost_user =
> self.dut.new_session(suite="vhost-user")+ self.virtio_user1 =
> self.dut.new_session(suite="virtio-user1")+ self.pmdout_vhost_user =
> PmdOutput(self.dut, self.vhost_user)+ self.pmdout_virtio_user1 =
> PmdOutput(self.dut, self.virtio_user1)++ def set_up(self):+ """+
> Run before each test case.+ """+ self.dut.send_expect("killall -s
> INT %s" % self.testpmd_name, "#")+ self.dut.send_expect("rm -
> rf %s/vhost-net*" % self.base_dir, "#")++ @property+ def
> check_2M_env(self):+ out = self.dut.send_expect("cat /proc/meminfo
> |grep Hugepagesize|awk '{print($2)}'", "# ")+ # On CentOS, sometimes
> return ' 2048'+ resp = out.replace(' ', '')+ return True if resp == '2048'
> else False++ def launch_testpmd_as_vhost_user(self, param,
> cores="Default", udev="", ports=[], no_pci=True):+
> self.pmdout_vhost_user.start_testpmd(cores=cores, param=param,
> vdevs=[udev], ports=ports, prefix="vhost",+
> fixed_prefix=True, no_pci=no_pci)+
> self.pmdout_vhost_user.execute_cmd('set fwd mac')++ def
> launch_testpmd_as_virtio_user1(self, param, cores="Default", udev="",
> no_pci=True):+ eal_param = ""+ if self.check_2M_env:+
> eal_param += " --single-file-segments"+ if 'vectorized' in
> self.running_case:+ eal_param += " --force-max-simd-bitwidth=512"+
> self.pmdout_virtio_user1.start_testpmd(cores=cores, param=param,
> vdevs=[udev], ports=[], prefix="virtio1",+
> fixed_prefix=True, eal_param=eal_param, no_pci=no_pci)++ def
> verify_vhost_queue_rx_tx_pkts(self, queue_list):+ out =
> self.pmdout_vhost_user.execute_cmd('stop')+ for queue_index in
> queue_list:+ queue = "Queue= %d" % queue_index+ index =
> out.find(queue)+ rx = re.search("RX-packets:\s*(\d*)", out[index:])+
> tx = re.search("TX-packets:\s*(\d*)", out[index:])+ rx_packets =
> int(rx.group(1))+ tx_packets = int(tx.group(1))+
> self.verify(rx_packets > 0 and tx_packets > 0,+ "The queue %d rx-
> packets or tx-packets is 0 about " % queue_index ++ "rx-
> packets:%d, tx-packets:%d" % (rx_packets, tx_packets))++ def
> test_virtio_loopback(self):+ param = " --nb-cores={} --rxq={} --txq={}"+
> other_param = " --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"+
> vhost_dev = f"'eth_vhost0,iface=vhost-net,client=1,queues=8'"+
> virtio_dev = f"'net_virtio_user0,mac={self.dst_mac},path=./vhost-
> net,server=1,queues=8,mrg_rxbuf=1,in_order=1'"++
> self.logger.info("Launch vhost as client mode with 2 queues")+ nb_core =
> 2+ vhost_rxq_txq = 2+ virtio_rxq_txq = 8+ vhost_param =
> param.format(nb_core, vhost_rxq_txq, vhost_rxq_txq)+ virtio_param =
> (other_param + param).format(nb_core, virtio_rxq_txq, virtio_rxq_txq)+
> self.launch_testpmd_as_vhost_user(param=vhost_param,
> cores=self.vhost_cores, udev=vhost_dev, no_pci=True)+
> self.pmdout_vhost_user.execute_cmd('start')+ self.logger.info("Launch
> virtio-user as server mode with 8 queues")+
> self.launch_testpmd_as_virtio_user1(param=virtio_param,
> cores=self.virtio1_cores, udev=virtio_dev, no_pci=True)+
> self.pmdout_virtio_user1.execute_cmd('set fwd mac')+
> self.pmdout_virtio_user1.execute_cmd('start tx_first 32')+
> self.verify_vhost_queue_rx_tx_pkts(queue_list=range(vhost_rxq_txq))+
> self.pmdout_vhost_user.execute_cmd('quit', '#')++
> self.logger.info("Relaunch vhost with 8 queues and send packets")+
> vhost_rxq_txq = 8+ vhost_param = param.format(nb_core,
> vhost_rxq_txq, vhost_rxq_txq)+
> self.launch_testpmd_as_vhost_user(param=vhost_param,
> cores=self.cores[0:3], udev=vhost_dev, no_pci=True)+
> self.pmdout_vhost_user.execute_cmd('start tx_first 32')+
> self.pmdout_vhost_user.execute_cmd('stop')+
> self.pmdout_vhost_user.execute_cmd('set burst 1')+
> self.pmdout_vhost_user.execute_cmd('start tx_first 1')+
> self.verify_vhost_queue_rx_tx_pkts(queue_list=range(vhost_rxq_txq))++
> self.pmdout_virtio_user1.execute_cmd('quit', '#')+
> self.pmdout_vhost_user.execute_cmd('quit', '#')++ def send_packets(self,
> frame_size, pkt_count):+ pkt =
> "Ether(dst='%s')/IP()/('x'*%d)" %(self.dst_mac, frame_size)+
> self.tester.scapy_append('sendp([%s], iface="%s", count=%s)' % (pkt,
> self.txItf, pkt_count))+ self.tester.scapy_execute()++ def
> verify_virtio_user_receive_packets(self, pkt_count):+ out =
> self.pmdout_virtio_user1.execute_cmd('show port stats all')+ rx =
> re.search("RX-packets:\s*(\d*)", out)+ tx = re.search("TX-
> packets:\s*(\d*)", out)+ rx_packets = int(rx.group(1))+ tx_packets =
> int(tx.group(1))+ self.verify(rx_packets >= pkt_count and tx_packets >=
> pkt_count,+ "Virtio-user receive no enough packets, RX-packets:
> {},RX-packets: {}".format(rx_packets, tx_packets))++ def
> test_virtio_pvp(self):+ param = " --nb-cores={} --txd={} --rxd={}"+
> vhost_dev = f"'net_vhost0,iface=vhost-net,queues=1'"+ virtio_dev =
> f"'net_virtio_user0,mac={self.dst_mac},path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1," \+
> f"vectorized=1,queue_size=1024'"+ self.logger.info("Launch vhost")+
> nb_core = 2+ vhost_rxd_txd = 1024+ vhost_param =
> param.format(nb_core, vhost_rxd_txd, vhost_rxd_txd)+ port =
> self.dut.ports_info[self.dut_ports[0]]['pci']+
> self.launch_testpmd_as_vhost_user(param=vhost_param,
> cores=self.vhost_cores, udev=vhost_dev,+ ports=[port],
> no_pci=False)+ self.pmdout_vhost_user.execute_cmd('start')++
> self.logger.info("Launch virtio")+ nb_core = 1+ virtio_param =
> param.format(nb_core, vhost_rxd_txd, vhost_rxd_txd)+
> self.launch_testpmd_as_virtio_user1(param=virtio_param,
> cores=self.virtio1_cores, udev=virtio_dev, no_pci=True)+
> self.pmdout_virtio_user1.execute_cmd('set fwd mac')+
> self.pmdout_virtio_user1.execute_cmd('start')++ self.logger.info("Start
> send packets and verify")+ # set tester port MTU=9000 when need to
> send big packets.+ self.tester.send_expect("ifconfig %s mtu %s" %
> (self.txItf, TSO_MTU), "# ")+ # set vhost testpmd port MTU=9000+
> self.pmdout_vhost_user.execute_cmd('stop')+
> self.pmdout_vhost_user.execute_cmd('port stop 0')+
> self.pmdout_vhost_user.execute_cmd('port config mtu 0 %s' % TSO_MTU)+
> self.pmdout_vhost_user.execute_cmd('port start 0')+
> self.pmdout_vhost_user.execute_cmd('start')+
> self.send_packets(frame_size=64, pkt_count=10)+
> self.send_packets(frame_size=1518, pkt_count=10)+
> self.verify_virtio_user_receive_packets(pkt_count=20)++
> self.pmdout_virtio_user1.execute_cmd('quit', '#')+
> self.pmdout_vhost_user.execute_cmd('quit', '#')++ def tear_down(self):+
> """+ Run after each test case.+ """+ self.dut.send_expect("killall -s
> INT %s" % self.testpmd_name, "#")++ def tear_down_all(self):+ """+
> Run after each test suite.+ """+
> self.dut.close_session(self.vhost_user)+
> self.dut.close_session(self.virtio_user1)+
> self.tester.send_expect("ifconfig %s mtu %s" % (self.txItf, DEFAULT_MTU),
> "# ")--
> 2.25.1
[-- Attachment #2: TestVirtioSmoke.log --]
[-- Type: application/octet-stream, Size: 7160 bytes --]
next prev parent reply other threads:[~2021-02-02 7:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 15:23 Ling Wei
2021-02-02 7:51 ` Ling, WeiX [this message]
2021-02-02 13:47 ` Wang, Yinan
2021-02-03 6:30 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4bc0a9af6cea4cacbc52d5b9edd0a055@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).