02/02/2021 16:33:55 dts: TEST SUITE : TestExternalMemory 02/02/2021 16:33:55 dts: NIC : fortville_eagle 02/02/2021 16:33:55 dut.10.240.183.141: 02/02/2021 16:33:55 tester: 02/02/2021 16:33:55 TestExternalMemory: Test Case test_IGB_UIO_xmem Begin 02/02/2021 16:33:55 dut.10.240.183.141: 02/02/2021 16:33:56 tester: 02/02/2021 16:33:56 dut.10.240.183.141: modprobe uio 02/02/2021 16:33:56 dut.10.240.183.141: 02/02/2021 16:33:56 dut.10.240.183.141: lsmod | grep igb_uio 02/02/2021 16:33:56 dut.10.240.183.141: 02/02/2021 16:33:56 dut.10.240.183.141: insmod ./x86_64-native-linuxapp-clang/kmod/igb_uio.ko 02/02/2021 16:33:56 dut.10.240.183.141: 02/02/2021 16:33:56 dut.10.240.183.141: lsmod | grep igb_uio 02/02/2021 16:33:56 dut.10.240.183.141: igb_uio 20480 0 uio 24576 1 igb_uio 02/02/2021 16:33:56 dut.10.240.183.141: ls 02/02/2021 16:33:56 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers eeprom_0.bin eeprom_1.bin ethtool_eeprom_0.bin ethtool_eeprom_0_cat.bin ethtool_eeprom_1.bin ethtool_eeprom_1_cat.bin examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-clang 02/02/2021 16:33:56 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=igb_uio 0000:82:00.2 0000:82:00.3 02/02/2021 16:33:57 dut.10.240.183.141: 02/02/2021 16:33:57 dut.10.240.183.141: ./x86_64-native-linuxapp-clang/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_20929_20210202163357 -- --mp-alloc=xmem -i 02/02/2021 16:34:57 TestExternalMemory: Test Case test_IGB_UIO_xmem Result FAILED: TIMEOUT on ./x86_64-native-linuxapp-clang/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_20929_20210202163357 -- --mp-alloc=xmem -i 02/02/2021 16:34:57 TestExternalMemory: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_20929_20210202163357/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.2 (socket 1) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.3 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7f43c8d0c000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7f43c83ac000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 3C:FD:FE:9C:5B:BA Configuring Port 1 (socket 1) Port 1: 3C:FD:FE:9C:5B:BB Checking link statuses... Done testpmd> 02/02/2021 16:34:57 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 02/02/2021 16:34:59 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_20929_20210202163357/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.2 (socket 1) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.3 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7f43c8d0c000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7f43c83ac000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 3C:FD:FE:9C:5B:BA Configuring Port 1 (socket 1) Port 1: 3C:FD:FE:9C:5B:BB Checking link statuses... Done testpmd> Killed [PEXPECT]# 02/02/2021 16:35:01 TestExternalMemory: Test Case test_IGB_UIO_xmemhuage Begin 02/02/2021 16:35:01 dut.10.240.183.141: 02/02/2021 16:35:02 tester: 02/02/2021 16:35:02 dut.10.240.183.141: modprobe uio 02/02/2021 16:35:02 dut.10.240.183.141: 02/02/2021 16:35:02 dut.10.240.183.141: lsmod | grep igb_uio 02/02/2021 16:35:02 dut.10.240.183.141: igb_uio 20480 0 uio 24576 1 igb_uio 02/02/2021 16:35:02 dut.10.240.183.141: rmmod -f igb_uio 02/02/2021 16:35:02 dut.10.240.183.141: 02/02/2021 16:35:02 dut.10.240.183.141: insmod ./x86_64-native-linuxapp-clang/kmod/igb_uio.ko 02/02/2021 16:35:02 dut.10.240.183.141: 02/02/2021 16:35:02 dut.10.240.183.141: lsmod | grep igb_uio 02/02/2021 16:35:02 dut.10.240.183.141: igb_uio 20480 0 uio 24576 1 igb_uio 02/02/2021 16:35:02 dut.10.240.183.141: ls 02/02/2021 16:35:02 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers eeprom_0.bin eeprom_1.bin ethtool_eeprom_0.bin ethtool_eeprom_0_cat.bin ethtool_eeprom_1.bin ethtool_eeprom_1_cat.bin examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-clang 02/02/2021 16:35:02 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=igb_uio 0000:82:00.2 0000:82:00.3 02/02/2021 16:35:03 dut.10.240.183.141: 02/02/2021 16:35:03 dut.10.240.183.141: ./x86_64-native-linuxapp-clang/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_20929_20210202163503 -- --mp-alloc=xmemhuge -i 02/02/2021 16:36:03 TestExternalMemory: Test Case test_IGB_UIO_xmemhuage Result FAILED: TIMEOUT on ./x86_64-native-linuxapp-clang/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_20929_20210202163503 -- --mp-alloc=xmemhuge -i 02/02/2021 16:36:03 TestExternalMemory: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_20929_20210202163503/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.2 (socket 1) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.3 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7fefce2e6000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7fefce2e3000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 3C:FD:FE:9C:5B:BA Configuring Port 1 (socket 1) Port 1: 3C:FD:FE:9C:5B:BB Checking link statuses... Done testpmd> 02/02/2021 16:36:03 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 02/02/2021 16:36:05 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_20929_20210202163503/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.2 (socket 1) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.3 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7fefce2e6000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7fefce2e3000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 3C:FD:FE:9C:5B:BA Configuring Port 1 (socket 1) Port 1: 3C:FD:FE:9C:5B:BB Checking link statuses... Done testpmd> Killed [PEXPECT]# 02/02/2021 16:36:07 TestExternalMemory: Test Case test_VFIO_PCI_xmem Begin 02/02/2021 16:36:08 dut.10.240.183.141: 02/02/2021 16:36:08 tester: 02/02/2021 16:36:08 dut.10.240.183.141: rmmod vfio_pci 02/02/2021 16:36:08 dut.10.240.183.141: 02/02/2021 16:36:08 dut.10.240.183.141: rmmod vfio_iommu_type1 02/02/2021 16:36:08 dut.10.240.183.141: 02/02/2021 16:36:08 dut.10.240.183.141: rmmod vfio 02/02/2021 16:36:08 dut.10.240.183.141: 02/02/2021 16:36:08 dut.10.240.183.141: modprobe vfio 02/02/2021 16:36:08 dut.10.240.183.141: 02/02/2021 16:36:08 dut.10.240.183.141: modprobe vfio_pci 02/02/2021 16:36:08 dut.10.240.183.141: 02/02/2021 16:36:08 dut.10.240.183.141: lsmod | grep vfio_iommu_type1 02/02/2021 16:36:08 dut.10.240.183.141: vfio_iommu_type1 36864 0 vfio 40960 2 vfio_iommu_type1,vfio_pci 02/02/2021 16:36:08 dut.10.240.183.141: ls 02/02/2021 16:36:08 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers eeprom_0.bin eeprom_1.bin ethtool_eeprom_0.bin ethtool_eeprom_0_cat.bin ethtool_eeprom_1.bin ethtool_eeprom_1_cat.bin examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-clang 02/02/2021 16:36:08 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:82:00.2 0000:82:00.3 02/02/2021 16:36:09 dut.10.240.183.141: 02/02/2021 16:36:09 dut.10.240.183.141: ./x86_64-native-linuxapp-clang/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_20929_20210202163609 -- --mp-alloc=xmem -i 02/02/2021 16:36:12 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_20929_20210202163609/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: using IOMMU type 1 (Type 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.2 (socket 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.3 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7f72d76a0000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7f72d6d40000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 3C:FD:FE:9C:5B:BA Configuring Port 1 (socket 1) Port 1: 3C:FD:FE:9C:5B:BB Checking link statuses... Done 02/02/2021 16:36:12 dut.10.240.183.141: start 02/02/2021 16:36:12 dut.10.240.183.141: io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: xmem Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=256 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=256 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=256 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=256 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 02/02/2021 16:36:12 tester: scapy 02/02/2021 16:36:13 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft me if you can.  scccccp///pSP///p p//Y | -- IPv6 layer  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    02/02/2021 16:36:15 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens192f2",count=20) 02/02/2021 16:36:15 tester: .................... Sent 20 packets. 02/02/2021 16:36:17 tester: exit() 02/02/2021 16:36:17 tester: 02/02/2021 16:36:17 tester: scapy 02/02/2021 16:36:18 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like it is your last  scccccp///pSP///p p//Y | day on earth.  sY/////////y caa S//P | -- Lao-Tze  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    02/02/2021 16:36:20 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens192f3",count=20) 02/02/2021 16:36:20 tester: .................... Sent 20 packets. 02/02/2021 16:36:22 tester: exit() 02/02/2021 16:36:22 tester: 02/02/2021 16:36:22 dut.10.240.183.141: stop 02/02/2021 16:36:22 dut.10.240.183.141: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 40 RX-dropped: 0 RX-total: 40 TX-packets: 40 TX-dropped: 0 TX-total: 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 02/02/2021 16:36:22 dut.10.240.183.141: quit 02/02/2021 16:36:24 dut.10.240.183.141: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Port 0: link state change event Done Shutting down port 0... Closing ports... Port 0 is closed Done Shutting down port 1... Closing ports... Port 1: link state change event Port 1 is closed Done Bye... 02/02/2021 16:36:24 dut.10.240.183.141: ls 02/02/2021 16:36:24 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers eeprom_0.bin eeprom_1.bin ethtool_eeprom_0.bin ethtool_eeprom_0_cat.bin ethtool_eeprom_1.bin ethtool_eeprom_1_cat.bin examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-clang 02/02/2021 16:36:24 dut.10.240.183.141: usertools/dpdk-devbind.py --force -u 0000:82:00.2 0000:82:00.3 02/02/2021 16:36:25 dut.10.240.183.141: 02/02/2021 16:36:25 TestExternalMemory: Test Case test_VFIO_PCI_xmem Result PASSED: 02/02/2021 16:36:25 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 02/02/2021 16:36:27 TestExternalMemory: Test Case test_VFIO_PCI_xmemhuge Begin 02/02/2021 16:36:27 dut.10.240.183.141: 02/02/2021 16:36:27 tester: 02/02/2021 16:36:27 dut.10.240.183.141: rmmod vfio_pci 02/02/2021 16:36:27 dut.10.240.183.141: 02/02/2021 16:36:27 dut.10.240.183.141: rmmod vfio_iommu_type1 02/02/2021 16:36:27 dut.10.240.183.141: 02/02/2021 16:36:27 dut.10.240.183.141: rmmod vfio 02/02/2021 16:36:28 dut.10.240.183.141: 02/02/2021 16:36:28 dut.10.240.183.141: modprobe vfio 02/02/2021 16:36:28 dut.10.240.183.141: 02/02/2021 16:36:28 dut.10.240.183.141: modprobe vfio_pci 02/02/2021 16:36:28 dut.10.240.183.141: 02/02/2021 16:36:28 dut.10.240.183.141: lsmod | grep vfio_iommu_type1 02/02/2021 16:36:28 dut.10.240.183.141: vfio_iommu_type1 36864 0 vfio 40960 2 vfio_iommu_type1,vfio_pci 02/02/2021 16:36:28 dut.10.240.183.141: ls 02/02/2021 16:36:28 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers eeprom_0.bin eeprom_1.bin ethtool_eeprom_0.bin ethtool_eeprom_0_cat.bin ethtool_eeprom_1.bin ethtool_eeprom_1_cat.bin examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-clang 02/02/2021 16:36:28 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:82:00.2 0000:82:00.3 02/02/2021 16:36:28 dut.10.240.183.141: 02/02/2021 16:36:28 dut.10.240.183.141: ./x86_64-native-linuxapp-clang/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_20929_20210202163628 -- --mp-alloc=xmemhuge -i 02/02/2021 16:36:31 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_20929_20210202163628/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: using IOMMU type 1 (Type 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.2 (socket 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1572) device: 0000:82:00.3 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7f7f24405000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7f7f24402000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 3C:FD:FE:9C:5B:BA Configuring Port 1 (socket 1) Port 1: 3C:FD:FE:9C:5B:BB Checking link statuses... Done 02/02/2021 16:36:31 dut.10.240.183.141: start 02/02/2021 16:36:31 dut.10.240.183.141: io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: xmemhuge Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=256 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=256 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=256 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=256 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 02/02/2021 16:36:31 tester: scapy 02/02/2021 16:36:32 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft me if you can.  scccccp///pSP///p p//Y | -- IPv6 layer  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    02/02/2021 16:36:34 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens192f2",count=20) 02/02/2021 16:36:34 tester: .................... Sent 20 packets. 02/02/2021 16:36:36 tester: exit() 02/02/2021 16:36:36 tester: 02/02/2021 16:36:36 tester: scapy 02/02/2021 16:36:37 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    02/02/2021 16:36:39 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens192f3",count=20) 02/02/2021 16:36:39 tester: .................... Sent 20 packets. 02/02/2021 16:36:41 tester: exit() 02/02/2021 16:36:41 tester: 02/02/2021 16:36:41 dut.10.240.183.141: stop 02/02/2021 16:36:41 dut.10.240.183.141: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 40 RX-dropped: 0 RX-total: 40 TX-packets: 40 TX-dropped: 0 TX-total: 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 02/02/2021 16:36:41 dut.10.240.183.141: quit 02/02/2021 16:36:42 dut.10.240.183.141: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Port 0: link state change event Done Shutting down port 0... Closing ports... Port 1: link state change event Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 02/02/2021 16:36:42 dut.10.240.183.141: ls 02/02/2021 16:36:42 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers eeprom_0.bin eeprom_1.bin ethtool_eeprom_0.bin ethtool_eeprom_0_cat.bin ethtool_eeprom_1.bin ethtool_eeprom_1_cat.bin examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-clang 02/02/2021 16:36:42 dut.10.240.183.141: usertools/dpdk-devbind.py --force -u 0000:82:00.2 0000:82:00.3 02/02/2021 16:36:43 dut.10.240.183.141: 02/02/2021 16:36:43 TestExternalMemory: Test Case test_VFIO_PCI_xmemhuge Result PASSED: 02/02/2021 16:36:43 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 02/02/2021 16:36:46 dts: TEST SUITE ENDED: TestExternalMemory 05/02/2021 08:00:21 dts: TEST SUITE : TestExternalMemory 05/02/2021 08:00:21 dts: NIC : fortville_spirit 05/02/2021 08:00:21 dut.10.240.183.141: 05/02/2021 08:00:22 tester: 05/02/2021 08:00:22 TestExternalMemory: Test Case test_IGB_UIO_xmem Begin 05/02/2021 08:00:22 dut.10.240.183.141: 05/02/2021 08:00:22 tester: 05/02/2021 08:00:22 dut.10.240.183.141: modprobe uio 05/02/2021 08:00:22 dut.10.240.183.141: 05/02/2021 08:00:22 dut.10.240.183.141: lsmod | grep igb_uio 05/02/2021 08:00:22 dut.10.240.183.141: 05/02/2021 08:00:22 dut.10.240.183.141: insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko 05/02/2021 08:00:22 dut.10.240.183.141: 05/02/2021 08:00:22 dut.10.240.183.141: lsmod | grep igb_uio 05/02/2021 08:00:22 dut.10.240.183.141: igb_uio 20480 0 uio 24576 1 igb_uio 05/02/2021 08:00:22 dut.10.240.183.141: ls 05/02/2021 08:00:22 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:00:22 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=igb_uio 0000:84:00.0 0000:84:00.1 05/02/2021 08:00:23 dut.10.240.183.141: 05/02/2021 08:00:23 dut.10.240.183.141: ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_11561_20210205080023 -- --mp-alloc=xmem -i 05/02/2021 08:00:27 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_11561_20210205080023/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.0 (socket 1) i40e_GLQF_reg_init(): i40e device 0000:84:00.0 changed global register [0x002689a0]. original: 0x00000000, new: 0x00000029 i40e_GLQF_reg_init(): i40e device 0000:84:00.0 changed global register [0x00268ca4]. original: 0x00001840, new: 0x00009420 i40e_aq_debug_write_global_register(): i40e device 0000:84:00.0 changed global register [0x0026c7a0]. original: 0xa8, after: 0x28 EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.1 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7f6d7269e000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7f6d71d3e000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 68:05:CA:30:6A:80 Configuring Port 1 (socket 1) Port 1: 68:05:CA:30:6A:81 Checking link statuses... Done 05/02/2021 08:00:27 dut.10.240.183.141: start 05/02/2021 08:00:28 dut.10.240.183.141: io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: xmem Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 05/02/2021 08:00:28 tester: scapy 05/02/2021 08:00:28 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like it is your last  scccccp///pSP///p p//Y | day on earth.  sY/////////y caa S//P | -- Lao-Tze  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:00:30 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f0",count=20) 05/02/2021 08:00:30 tester: .................... Sent 20 packets. 05/02/2021 08:00:32 tester: exit() 05/02/2021 08:00:33 tester: 05/02/2021 08:00:33 tester: scapy 05/02/2021 08:00:33 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Wanna support ? Rate it on  scccccp///pSP///p p//Y | sectools!  sY/////////y caa S//P | http://sectools.org/tool//  cayCyayP//Ya pY/Ya | -- Satoshi Nakamoto  sY/PsY////YCc aC//Yp  |  sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:00:35 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f1",count=20) 05/02/2021 08:00:35 tester: .................... Sent 20 packets. 05/02/2021 08:00:37 tester: exit() 05/02/2021 08:00:38 tester: 05/02/2021 08:00:38 dut.10.240.183.141: stop 05/02/2021 08:00:38 dut.10.240.183.141: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 40 RX-dropped: 0 RX-total: 40 TX-packets: 40 TX-dropped: 0 TX-total: 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 05/02/2021 08:00:38 dut.10.240.183.141: quit 05/02/2021 08:00:39 dut.10.240.183.141: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Port 0: link state change event Done Shutting down port 0... Closing ports... Port 1: link state change event Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 05/02/2021 08:00:39 dut.10.240.183.141: ls 05/02/2021 08:00:39 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:00:39 dut.10.240.183.141: usertools/dpdk-devbind.py --force -u 0000:84:00.0 0000:84:00.1 05/02/2021 08:00:40 dut.10.240.183.141: 05/02/2021 08:00:40 TestExternalMemory: Test Case test_IGB_UIO_xmem Result PASSED: 05/02/2021 08:00:40 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 05/02/2021 08:00:43 TestExternalMemory: Test Case test_IGB_UIO_xmemhuage Begin 05/02/2021 08:00:43 dut.10.240.183.141: 05/02/2021 08:00:43 tester: 05/02/2021 08:00:43 dut.10.240.183.141: modprobe uio 05/02/2021 08:00:43 dut.10.240.183.141: 05/02/2021 08:00:43 dut.10.240.183.141: lsmod | grep igb_uio 05/02/2021 08:00:43 dut.10.240.183.141: igb_uio 20480 0 uio 24576 1 igb_uio 05/02/2021 08:00:43 dut.10.240.183.141: rmmod -f igb_uio 05/02/2021 08:00:43 dut.10.240.183.141: 05/02/2021 08:00:43 dut.10.240.183.141: insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko 05/02/2021 08:00:43 dut.10.240.183.141: 05/02/2021 08:00:43 dut.10.240.183.141: lsmod | grep igb_uio 05/02/2021 08:00:43 dut.10.240.183.141: igb_uio 20480 0 uio 24576 1 igb_uio 05/02/2021 08:00:43 dut.10.240.183.141: ls 05/02/2021 08:00:43 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:00:43 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=igb_uio 0000:84:00.0 0000:84:00.1 05/02/2021 08:00:44 dut.10.240.183.141: 05/02/2021 08:00:44 dut.10.240.183.141: ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_11561_20210205080044 -- --mp-alloc=xmemhuge -i 05/02/2021 08:00:46 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_11561_20210205080044/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.0 (socket 1) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.1 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7f7416c4f000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7f7416c4c000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 68:05:CA:30:6A:80 Configuring Port 1 (socket 1) Port 1: 68:05:CA:30:6A:81 Checking link statuses... Done 05/02/2021 08:00:46 dut.10.240.183.141: start 05/02/2021 08:00:46 dut.10.240.183.141: io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: xmemhuge Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 05/02/2021 08:00:46 tester: scapy 05/02/2021 08:00:46 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets before they craft  scccccp///pSP///p p//Y | you.  sY/////////y caa S//P | -- Socrate  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:00:48 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f0",count=20) 05/02/2021 08:00:49 tester: .................... Sent 20 packets. 05/02/2021 08:00:51 tester: exit() 05/02/2021 08:00:51 tester: 05/02/2021 08:00:51 tester: scapy 05/02/2021 08:00:51 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like it is your last  scccccp///pSP///p p//Y | day on earth.  sY/////////y caa S//P | -- Lao-Tze  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:00:53 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f1",count=20) 05/02/2021 08:00:54 tester: .................... Sent 20 packets. 05/02/2021 08:00:56 tester: exit() 05/02/2021 08:00:56 tester: 05/02/2021 08:00:56 dut.10.240.183.141: stop 05/02/2021 08:00:56 dut.10.240.183.141: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 40 RX-dropped: 0 RX-total: 40 TX-packets: 40 TX-dropped: 0 TX-total: 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 05/02/2021 08:00:56 dut.10.240.183.141: quit 05/02/2021 08:00:57 dut.10.240.183.141: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Port 0: link state change event Done Shutting down port 0... Closing ports... Port 1: link state change event Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 05/02/2021 08:00:57 dut.10.240.183.141: ls 05/02/2021 08:00:57 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:00:57 dut.10.240.183.141: usertools/dpdk-devbind.py --force -u 0000:84:00.0 0000:84:00.1 05/02/2021 08:00:58 dut.10.240.183.141: 05/02/2021 08:00:58 TestExternalMemory: Test Case test_IGB_UIO_xmemhuage Result PASSED: 05/02/2021 08:00:58 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 05/02/2021 08:01:00 TestExternalMemory: Test Case test_VFIO_PCI_xmem Begin 05/02/2021 08:01:00 dut.10.240.183.141: 05/02/2021 08:01:00 tester: 05/02/2021 08:01:00 dut.10.240.183.141: rmmod vfio_pci 05/02/2021 08:01:00 dut.10.240.183.141: 05/02/2021 08:01:00 dut.10.240.183.141: rmmod vfio_iommu_type1 05/02/2021 08:01:01 dut.10.240.183.141: 05/02/2021 08:01:01 dut.10.240.183.141: rmmod vfio 05/02/2021 08:01:01 dut.10.240.183.141: 05/02/2021 08:01:01 dut.10.240.183.141: modprobe vfio 05/02/2021 08:01:01 dut.10.240.183.141: 05/02/2021 08:01:01 dut.10.240.183.141: modprobe vfio_pci 05/02/2021 08:01:01 dut.10.240.183.141: 05/02/2021 08:01:01 dut.10.240.183.141: lsmod | grep vfio_iommu_type1 05/02/2021 08:01:01 dut.10.240.183.141: vfio_iommu_type1 36864 0 vfio 40960 2 vfio_iommu_type1,vfio_pci 05/02/2021 08:01:01 dut.10.240.183.141: ls 05/02/2021 08:01:01 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:01:01 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:84:00.0 0000:84:00.1 05/02/2021 08:01:02 dut.10.240.183.141: 05/02/2021 08:01:02 dut.10.240.183.141: ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_11561_20210205080102 -- --mp-alloc=xmem -i 05/02/2021 08:01:05 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_11561_20210205080102/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: using IOMMU type 1 (Type 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.0 (socket 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.1 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7ff56b6a0000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7ff56ad40000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 797MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 68:05:CA:30:6A:80 Configuring Port 1 (socket 1) Port 1: 68:05:CA:30:6A:81 Checking link statuses... Done 05/02/2021 08:01:05 dut.10.240.183.141: start 05/02/2021 08:01:05 dut.10.240.183.141: io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: xmem Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 05/02/2021 08:01:05 tester: scapy 05/02/2021 08:01:06 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:01:08 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f0",count=20) 05/02/2021 08:01:08 tester: .................... Sent 20 packets. 05/02/2021 08:01:10 tester: exit() 05/02/2021 08:01:10 tester: 05/02/2021 08:01:10 tester: scapy 05/02/2021 08:01:11 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets before they craft  scccccp///pSP///p p//Y | you.  sY/////////y caa S//P | -- Socrate  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:01:13 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f1",count=20) 05/02/2021 08:01:13 tester: .................... Sent 20 packets. 05/02/2021 08:01:15 tester: exit() 05/02/2021 08:01:15 tester: 05/02/2021 08:01:15 dut.10.240.183.141: stop 05/02/2021 08:01:15 dut.10.240.183.141: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 40 RX-dropped: 0 RX-total: 40 TX-packets: 40 TX-dropped: 0 TX-total: 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 05/02/2021 08:01:15 dut.10.240.183.141: quit 05/02/2021 08:01:17 dut.10.240.183.141: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Port 0: link state change event Done Shutting down port 0... Closing ports... Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 05/02/2021 08:01:17 dut.10.240.183.141: ls 05/02/2021 08:01:17 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:01:17 dut.10.240.183.141: usertools/dpdk-devbind.py --force -u 0000:84:00.0 0000:84:00.1 05/02/2021 08:01:18 dut.10.240.183.141: 05/02/2021 08:01:18 TestExternalMemory: Test Case test_VFIO_PCI_xmem Result PASSED: 05/02/2021 08:01:18 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 05/02/2021 08:01:21 TestExternalMemory: Test Case test_VFIO_PCI_xmemhuge Begin 05/02/2021 08:01:21 dut.10.240.183.141: 05/02/2021 08:01:21 tester: 05/02/2021 08:01:21 dut.10.240.183.141: rmmod vfio_pci 05/02/2021 08:01:21 dut.10.240.183.141: 05/02/2021 08:01:21 dut.10.240.183.141: rmmod vfio_iommu_type1 05/02/2021 08:01:21 dut.10.240.183.141: 05/02/2021 08:01:21 dut.10.240.183.141: rmmod vfio 05/02/2021 08:01:21 dut.10.240.183.141: 05/02/2021 08:01:21 dut.10.240.183.141: modprobe vfio 05/02/2021 08:01:21 dut.10.240.183.141: 05/02/2021 08:01:21 dut.10.240.183.141: modprobe vfio_pci 05/02/2021 08:01:21 dut.10.240.183.141: 05/02/2021 08:01:21 dut.10.240.183.141: lsmod | grep vfio_iommu_type1 05/02/2021 08:01:21 dut.10.240.183.141: vfio_iommu_type1 36864 0 vfio 40960 2 vfio_iommu_type1,vfio_pci 05/02/2021 08:01:21 dut.10.240.183.141: ls 05/02/2021 08:01:21 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:01:21 dut.10.240.183.141: usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:84:00.0 0000:84:00.1 05/02/2021 08:01:22 dut.10.240.183.141: 05/02/2021 08:01:22 dut.10.240.183.141: ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4 -n 4 --file-prefix=dpdk_11561_20210205080122 -- --mp-alloc=xmemhuge -i 05/02/2021 08:01:24 dut.10.240.183.141: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_11561_20210205080122/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: using IOMMU type 1 (Type 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.0 (socket 1) EAL: Ignore mapping IO port bar(1) EAL: Ignore mapping IO port bar(4) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:84:00.1 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=171456, size=2176, socket=0 EAL: WARNING! Base virtual address hint (0x2200005000 != 0x7fc6f92ce000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=171456, size=2176, socket=1 EAL: WARNING! Base virtual address hint (0x220000b000 != 0x7fc6f92cb000) not respected! EAL: This may cause issues with mapping memory into secondary processes testpmd: Allocated 496MB of external memory testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 68:05:CA:30:6A:80 Configuring Port 1 (socket 1) Port 1: 68:05:CA:30:6A:81 Checking link statuses... Done 05/02/2021 08:01:24 dut.10.240.183.141: start 05/02/2021 08:01:24 dut.10.240.183.141: io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: xmemhuge Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 io packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x10000 RX queue: 0 RX desc=2048 - RX free threshold=32 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0 TX queue: 0 TX desc=1024 - TX free threshold=32 TX threshold registers: pthresh=32 hthresh=0 wthresh=0 TX offloads=0x10000 - TX RS bit threshold=32 05/02/2021 08:01:24 tester: scapy 05/02/2021 08:01:25 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Wanna support ? Rate it on  scccccp///pSP///p p//Y | sectools!  sY/////////y caa S//P | http://sectools.org/tool//  cayCyayP//Ya pY/Ya | -- Satoshi Nakamoto  sY/PsY////YCc aC//Yp  |  sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:01:27 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f0",count=20) 05/02/2021 08:01:27 tester: .................... Sent 20 packets. 05/02/2021 08:01:29 tester: exit() 05/02/2021 08:01:29 tester: 05/02/2021 08:01:29 tester: scapy 05/02/2021 08:01:30 tester: INFO: PyX dependencies are not installed ! Please install TexLive or MikTeX. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like it is your last  scccccp///pSP///p p//Y | day on earth.  sY/////////y caa S//P | -- Lao-Tze  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    05/02/2021 08:01:32 tester: sendp([Ether()/IP()/UDP()/Raw('X'*18)], iface="ens193f1",count=20) 05/02/2021 08:01:32 tester: .................... Sent 20 packets. 05/02/2021 08:01:34 tester: exit() 05/02/2021 08:01:34 tester: 05/02/2021 08:01:34 dut.10.240.183.141: stop 05/02/2021 08:01:35 dut.10.240.183.141: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 20 RX-dropped: 0 RX-total: 20 TX-packets: 20 TX-dropped: 0 TX-total: 20 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 40 RX-dropped: 0 RX-total: 40 TX-packets: 40 TX-dropped: 0 TX-total: 40 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 05/02/2021 08:01:35 dut.10.240.183.141: quit 05/02/2021 08:01:36 dut.10.240.183.141: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Port 0: link state change event Done Shutting down port 0... Closing ports... Port 1: link state change event Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 05/02/2021 08:01:36 dut.10.240.183.141: ls 05/02/2021 08:01:36 dut.10.240.183.141: ABI_VERSION app buildtoo config devtoo doc dpdk.log drivers examples kernel lib license MAINTAINERS Makefile meson.build meson_options.txt README usertoo VERSION x86_64-native-linuxapp-gcc 05/02/2021 08:01:36 dut.10.240.183.141: usertools/dpdk-devbind.py --force -u 0000:84:00.0 0000:84:00.1 05/02/2021 08:01:37 dut.10.240.183.141: 05/02/2021 08:01:37 TestExternalMemory: Test Case test_VFIO_PCI_xmemhuge Result PASSED: 05/02/2021 08:01:37 dut.10.240.183.141: kill_all: called by dut and prefix list has value. 05/02/2021 08:01:39 dts: TEST SUITE ENDED: TestExternalMemory