[dts][PATCH V1 1/8] test_plans/ddp_gtp_qregion: remove --pkt-filter-mode sync dpdk change

[dts][PATCH V1 1/8] test_plans/ddp_gtp_qregion: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration) remove flow_director_filter raw pkt test case.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 test_plans/ddp_gtp_qregion_test_plan.rst | 420 +----------------------
 1 file changed, 2 insertions(+), 418 deletions(-)

diff --git a/test_plans/ddp_gtp_qregion_test_plan.rst b/test_plans/ddp_gtp_qregion_test_plan.rst
index bc3b9b68..ba928386 100644
--- a/test_plans/ddp_gtp_qregion_test_plan.rst
+++ b/test_plans/ddp_gtp_qregion_test_plan.rst
@@ -53,12 +53,9 @@ Prerequisites
     ./tools/dpdk-devbind.py -b igb_uio 81:00.0
 
 2. Start testpmd on host, set chained port topology mode, add txq/rxq to 
-   enable multi-queues. If test PF flow director, need to add 
-   --pkt-filter-mode=perfect on testpmd to enable flow director. In general, 
-   PF's max queue is 64::
+   enable multi-queues. In general, PF's max queue is 64::
 
-    ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect
-    --port-topology=chained --txq=64 --rxq=64
+    ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
 
 
 Load/delete dynamic device personalization 
@@ -668,419 +665,6 @@ Test Case: Inner IPv6 dst controls GTP-U IPv6 queue in queue region
      IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
      dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/UDP()/Raw('x'*20)
 
-
-Test Case: Flow director for GTP IPv4 with default fd input set
-===============================================================
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item::
-
-    testpmd> port config 0 pctype mapping update 22 26
-
-3. Default flow director input set is teid, start testpmd, set fwd rxonly,
-   enable output print
-
-4. Send GTP IPv4 packets, check to receive packet from queue 0::
-
-    p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-5. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination
-   address and port should be swapped in the template and traffic packets::
-
-    a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(dst="1.1.1.1",
-    src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20)
-
-6. Setup raw flow type filter for flow director, configured queue is random 
-   queue between 1~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36
-             fd_id 1 packet test_gtp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-10. Send non-matched inner src IPv4/dst IPv4/sport/dport packets, check to 
-    receive packets from queue 36::
-
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.2",
-     dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
-     dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20)
-
-11. Send non-matched teid GTP IPv4 packets, check to receive packet from
-    queue 0::
-
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header(teid=0xff)/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv4 according to inner dst IPv4
-=================================================================
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item::
-
-    testpmd> port config 0 pctype mapping update 22 26
-
-3. Reset GTP IPv4 flow director configure::
-
-    testpmd> port config 0 pctype 22 fdir_inset clear all
-
-4. Inner dst IPv4 words are 27 and 28, enable flow director input set for
-   them::
-
-    testpmd> port config 0 pctype 22 fdir_inset set field 27
-    testpmd> port config 0 pctype 22 fdir_inset set field 28
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv4 packets, check to receive packet from queue 0::
-
-    p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination
-   address and port should be swapped in the template and traffic packets::
-
-    a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(dst="1.1.1.1",
-    src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random 
-   queue between 1~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36
-             fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-10. Send non-matched inner src IPv4/sport/dport packets, check to receive
-    packets from queue 36::
- 
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.2",
-     dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20)
-
-11. Send non-matched inner dst IPv4 packets, check to receive packet from
-    queue 0::
-
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-     dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv4 according to inner src IPv4
-=================================================================
-1. Check flow ptype to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv4 flow type id 26 to pctype id 22 mapping item::
-
-    testpmd> port config 0 pctype mapping update 22 26
-
-3. Reset GTP IPv4 flow director configure::
-
-    testpmd> port config 0 pctype 22 fdir_inset clear all
-
-4. Inner src IPv4 words are 15 and 16, enable flow director input set for
-   them::
-
-    testpmd> port config 0 pctype 22 fdir_inset set field 15
-    testpmd> port config 0 pctype 22 fdir_inset set field 16
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv4 packets, check to receive packet from queue 0::
-
-    p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv4 raw packet test_gtp.raw, source/destination
-   address and port should be swapped in the template and traffic packets::
-
-    a=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(dst="1.1.1.1",
-    src="2.2.2.2")/UDP(dport=40, sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random 
-   queue between 1~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36
-             fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-10. Send non-matched inner dst IPv4/sport/dport packets, check to receive
-    packets from queue 36::
-
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-     dst="2.2.2.3")/UDP(sport=40, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=41, dport=50)/Raw('x'*20)
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.1",
-     dst="2.2.2.2")/UDP(sport=40, dport=51)/Raw('x'*20)
-
-11. Send non-matched inner src IPv4 packets, check to receive packet
-    from queue 0::
-
-     p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP(src="1.1.1.2",
-     dst="2.2.2.2")/UDP(sport=40, dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv6 with default fd input set
-===============================================================
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item::
-
-    testpmd> port config 0 pctype mapping update 23 23
-
-3. Default flow director input set is teid, start testpmd, set fwd rxonly,
-   enable output print
-
-4. Send GTP IPv6 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-
-5. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination
-   address and port should be swapped in the template and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(dport=40,sport=50)/Raw('x'*20)
-
-6. Setup raw flow type filter for flow director, configured queue is random 
-   queue between 1~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
-             fd_id 1 packet test_gtp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-    
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-
-8. Send non-matched inner src IPv6/dst IPv6/sport/dport packets, check to 
-   receive packets from queue 36::
-
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=41,dport=50)/Raw('x'*20)
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=51)/Raw('x'*20)
-
-11. Send non-matched teid packets, check to receive packet
-    from queue 0::
-
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xff)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=40,dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv6 according to inner dst IPv6
-=================================================================
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item::
-
-    testpmd> port config 0 pctype mapping update 23 23
-
-3. Reset GTP IPv6 flow director configure::
-
-    testpmd> port config 0 pctype 23 fdir_inset clear all
-
-4. Inner dst IPv6 words are 21~28 , enable flow director input set for them::
-
-    testpmd> port config 0 pctype 23 fdir_inset set field 21
-    testpmd> port config 0 pctype 23 fdir_inset set field 22
-    testpmd> port config 0 pctype 23 fdir_inset set field 23
-    testpmd> port config 0 pctype 23 fdir_inset set field 24
-    testpmd> port config 0 pctype 23 fdir_inset set field 25
-    testpmd> port config 0 pctype 23 fdir_inset set field 26
-    testpmd> port config 0 pctype 23 fdir_inset set field 27
-    testpmd> port config 0 pctype 23 fdir_inset set field 28
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv6 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination
-   address and port should be swapped in the template and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(dport=40,sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random 
-   queue between 1~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
-             fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-    
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-
-10. Send non-matched inner src IPv6/sport/dport packets, check to receive
-    packets from queue 36::
-
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=40,dport=50)/Raw('x'*20)
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=41,dport=50)/Raw('x'*20)
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=40,dport=51)/Raw('x'*20)
-
-11. Send non-matched inner dst IPv6 packets, check to receive packet
-    from queue 0::
-
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
-     UDP(sport=40,dport=50)/Raw('x'*20)
-
-
-Test Case: Flow director for GTP IPv6 according to inner src IPv6
-=================================================================
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update GTP IPv6 flow type id 23 to pctype id 23 mapping item::
-
-    testpmd> port config 0 pctype mapping update 23 23
-
-3. Reset GTP IPv6 flow director configure::
-
-    testpmd> port config 0 pctype 23 fdir_inset clear all
-
-4. Inner src IPv6 words are 13~20, enable flow director input set for them::
-
-    testpmd> port config 0 pctype 23 fdir_inset set field 13
-    testpmd> port config 0 pctype 23 fdir_inset set field 14
-    testpmd> port config 0 pctype 23 fdir_inset set field 15
-    testpmd> port config 0 pctype 23 fdir_inset set field 16
-    testpmd> port config 0 pctype 23 fdir_inset set field 17
-    testpmd> port config 0 pctype 23 fdir_inset set field 18
-    testpmd> port config 0 pctype 23 fdir_inset set field 19
-    testpmd> port config 0 pctype 23 fdir_inset set field 20
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send GTP IPv6 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-
-7. Use scapy to generate GTP IPv6 raw packet test_gtp.raw, source/destination
-   address and port should be swapped in the template and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(dport=40,sport=50)/Raw('x'*20)
-
-8. Setup raw flow type filter for flow director, configured queue is random 
-   queue between 1~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
-             fd_id 1 packet test_gtp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=40,dport=50)/Raw('x'*20)
-
-10. Send non-matched inner dst IPv6/sport/dport packets, check to receive
-    packets from queue 36::
-
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
-     UDP(sport=40,dport=50)/Raw('x'*20)
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=41,dport=50)/Raw('x'*20)
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=40,dport=51)/Raw('x'*20)
-
-11. Send non-matched inner src IPv6 packets, check to receive packet from
-    queue 0::
-
-     p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header(teid=0xfe)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=40,dport=50)/Raw('x'*20)
-
-
 Test Case: Outer 64 bit prefix dst controls GTP-C queue
 =======================================================
 1. Check flow type to pctype mapping::
-- 
2.17.1

[dts][PATCH V1 2/8] tests/ddp_gtp_qregion: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration) remove flow_director_filter raw pkt test case.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 tests/TestSuite_ddp_gtp_qregion.py | 140 +----------------------------
 1 file changed, 1 insertion(+), 139 deletions(-)

diff --git a/tests/TestSuite_ddp_gtp_qregion.py b/tests/TestSuite_ddp_gtp_qregion.py
index a3dea1b2..08048b3f 100644
--- a/tests/TestSuite_ddp_gtp_qregion.py
+++ b/tests/TestSuite_ddp_gtp_qregion.py
@@ -56,7 +56,7 @@ class TestDdpGtpQregion(TestCase):
         """
         self.dut_testpmd.start_testpmd(
             "Default",
-            "--pkt-filter-mode=perfect --port-topology=chained \
+            "--port-topology=chained \
             --txq=%s --rxq=%s"
             % (self.PF_QUEUE, self.PF_QUEUE),
         )
@@ -288,62 +288,6 @@ class TestDdpGtpQregion(TestCase):
             "Failed update flow type to pctype mapping!!!",
         )
 
-    def run_fd_test(self, crlwords, flowtype, pctype, keywords, qchecks):
-        """
-        Use dynamic flowtype/pctype mapping, use default or dynamic change
-        control words to set flow director input configuration for new
-        protocol, setup raw flow type filter for flow director, check flow
-        director could work.
-        crlwords: control words of keyword
-        flowtype: define flow type 23~63 values for GTP packet types as test
-                  plan table.
-        pctype: profile defines below 10~25 pctypes for GTP packet types.
-        keywords: keywords have Session ID, S-Port, D-Port, IP SA, IP DA and
-                  etc.
-        qchecks: define sameq and difq. If change keywords, direct packets to
-                 queue 0, otherwise direct packets to same queue.
-        """
-
-        self.flowtype_pctype_mapping(flowtype, pctype)
-        if crlwords is not None:
-            self.dut_testpmd.execute_cmd("port stop all")
-            time.sleep(1)
-            self.dut_testpmd.execute_cmd(
-                "port config 0 pctype %s fdir_inset clear all" % pctype
-            )
-            for word in crlwords:
-                self.dut_testpmd.execute_cmd(
-                    "port config 0 pctype %s fdir_inset set field %s" % (pctype, word)
-                )
-            self.dut_testpmd.execute_cmd("port start all")
-        self.dut_testpmd.execute_cmd("set fwd rxonly")
-        self.dut_testpmd.execute_cmd("set verbose 1")
-        self.dut_testpmd.execute_cmd("start")
-        self.dut_testpmd.wait_link_status_up(self.dut_ports[0])
-        qnum = self.send_verify_fd(flowtype, keywords, "word_opt")
-        self.verify(qnum == 0, "Receive packet from wrong queue!!!")
-        self.raw_packet_generate(flowtype)
-        queue = random.randint(1, self.PF_QUEUE - 1)
-        self.dut_testpmd.execute_cmd(
-            "flow_director_filter 0 mode raw add flow %d fwd queue %d \
-            fd_id 1 packet /tmp/test_gtp.raw"
-            % (flowtype, queue)
-        )
-        qnum = self.send_verify_fd(flowtype, keywords, "word_opt")
-        qdef = qnum
-        self.verify(qnum == queue, "Receive packet from wrong queue!!!")
-        for word, chk in zip(keywords, qchecks):
-            qnum = self.send_verify_fd(flowtype, word, "chg_sufword_opt")
-            if qnum == qdef:
-                result = "sameq"
-            elif qnum == 0:
-                result = "difq"
-            self.verify(
-                result == chk,
-                "Faild to verify flow director when \
-                key word change!!!",
-            )
-
     def run_gtp_test(self, crlwords, flowtype, pctype, qmin, qmax, keyword):
         """
         Use dynamic flowtype/pctype mapping, queue region, dynamic change
@@ -523,88 +467,6 @@ class TestDdpGtpQregion(TestCase):
         crlwords = list(range(21, 29))
         self.run_gtp_test(crlwords, 23, 23, 10, 25, "dst_ipv6")
 
-    def test_fd_gtpu_ipv4(self):
-        """
-        GTP is supported by NVM with profile updated. Download profile then
-        set queue region/flowtype/pctype mapping, default flow director input
-        set configuration is teid, setup raw flow type filter for flow
-        director check flow director could work when sending matched teid
-        packets to configured queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_ip", "dst_ip", "sport", "dport", "teid"]
-        qchecks = ["sameq", "sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 26, 22, keywords, qchecks)
-
-    def test_fd_gtpu_ipv4_dstip(self):
-        """
-        GTP is supported by NVM with profile updated. Download profile then
-        set queue region/flowtype/pctype mapping, dynamic to change flow
-        director input set configuration for dst IPv4 words 27~28, setup
-        raw flow type filter for flow director, check flow director could
-        work when sending matched dst IPv4 packets to configured queue,
-        otherwise direct packets to queue 0.
-        """
-        crlwords = list(range(27, 29))
-        keywords = ["src_ip", "sport", "dport", "dst_ip"]
-        qchecks = ["sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 26, 22, keywords, qchecks)
-
-    def test_fd_gtpu_ipv4_srcip(self):
-        """
-        GTP is supported by NVM with profile updated. Download profile then
-        set queue region/flowtype/pctype mapping, dynamic to change flow
-        director input set configuration for src IPv4 words 15~16, setup
-        raw flow type filter for flow director, check flow director could
-        work when sending matched src IPv4 packets to configured queue,
-        otherwise direct packets to queue 0.
-        """
-        crlwords = list(range(15, 17))
-        keywords = ["dst_ip", "sport", "dport", "src_ip"]
-        qchecks = ["sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 26, 22, keywords, qchecks)
-
-    def test_fd_gtpu_ipv6(self):
-        """
-        GTP is supported by NVM with profile updated. Download profile then
-        set queue region/flowtype/pctype mapping, default flow director input
-        set configuration is teid, setup raw flow type filter for flow
-        director check flow director could work when sending matched teid
-        packets to configured queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_ipv6", "dst_ipv6", "sport", "dport", "teid"]
-        qchecks = ["sameq", "sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 23, 23, keywords, qchecks)
-
-    def test_fd_gtpu_ipv6_dstipv6(self):
-        """
-        GTP is supported by NVM with profile updated. Download profile then
-        set queue region/flowtype/pctype mapping, dynamic to change flow
-        director input set configuration for dst IPv6 words 21~28, setup
-        raw flow type filter for flow director, check flow director could
-        work when sending matched dst IPv6 packets to configured queue,
-        otherwise direct packets to queue 0.
-        """
-        crlwords = list(range(21, 29))
-        keywords = ["src_ipv6", "sport", "dport", "teid", "dst_ipv6"]
-        qchecks = ["sameq", "sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 23, 23, keywords, qchecks)
-
-    def test_fd_gtpu_ipv6_srcipv6(self):
-        """
-        GTP is supported by NVM with profile updated. Download profile then
-        set queue region/flowtype/pctype mapping, dynamic to change flow
-        director input set configuration for src IPv6 words 13~20, setup
-        raw flow type filter for flow director, check flow director could
-        work when sending matched src IPv6 packets to configured queue,
-        otherwise direct packets to queue 0.
-        """
-        crlwords = list(range(13, 21))
-        keywords = ["dst_ipv6", "sport", "dport", "teid", "src_ipv6"]
-        qchecks = ["sameq", "sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 23, 23, keywords, qchecks)
-
     def test_outer_64pre_dst_contrl_gtpcq(self):
         """
         GTP is supported by NVM with profile updated. Download profile then
-- 
2.17.1

[dts][PATCH V1 3/8] test_plans/ddp_l2tpv3: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration)
remove --pkt-filter-mode.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 test_plans/ddp_l2tpv3_test_plan.rst | 1 -
 1 file changed, 1 deletion(-)

diff --git a/test_plans/ddp_l2tpv3_test_plan.rst b/test_plans/ddp_l2tpv3_test_plan.rst
index 7039119d..cb0e5026 100644
--- a/test_plans/ddp_l2tpv3_test_plan.rst
+++ b/test_plans/ddp_l2tpv3_test_plan.rst
@@ -103,7 +103,6 @@ any DDP functionality*
 
     ./<build>/app/dpdk-testpmd -c f -n 4 -a
     <PCI address of device> -- -i --port-topology=chained --txq=64 --rxq=64
-    --pkt-filter-mode=perfect
 
    For testpmd commands refer: https://doc.dpdk.org/guides/testpmd_app_ug/
 
-- 
2.17.1

[dts][PATCH V1 4/8] tests/ddp_l2tpv3: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration)
remove --pkt-filter-mode.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 tests/TestSuite_ddp_l2tpv3.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tests/TestSuite_ddp_l2tpv3.py b/tests/TestSuite_ddp_l2tpv3.py
index ef50824b..7b63e641 100644
--- a/tests/TestSuite_ddp_l2tpv3.py
+++ b/tests/TestSuite_ddp_l2tpv3.py
@@ -53,7 +53,7 @@ class TestDdpL2tpv3(TestCase):
         """
         self.dut_testpmd.start_testpmd(
             "Default",
-            "--pkt-filter-mode=perfect --port-topology=chained \
+            "--port-topology=chained \
             --txq=%s --rxq=%s --disable-rss"
             % (self.PF_QUEUE, self.PF_QUEUE),
         )
-- 
2.17.1

[dts][PATCH V1 5/8] test_plans/ddp_ppp_l2tp: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration)
remove flow_director_filter raw pkt test case.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 test_plans/ddp_ppp_l2tp_test_plan.rst | 487 +-------------------------
 1 file changed, 1 insertion(+), 486 deletions(-)

diff --git a/test_plans/ddp_ppp_l2tp_test_plan.rst b/test_plans/ddp_ppp_l2tp_test_plan.rst
index 35b0d805..4d3dff93 100644
--- a/test_plans/ddp_ppp_l2tp_test_plan.rst
+++ b/test_plans/ddp_ppp_l2tp_test_plan.rst
@@ -77,12 +77,9 @@ Prerequisites
     ./tools/dpdk-devbind.py -b igb_uio 81:00.0
 
 2. Start testpmd on host, set chained port topology mode, add txq/rxq to
-   enable multi-queues. If test PF flow director, need to add
-   --pkt-filter-mode=perfect on testpmd to enable flow director. In general,
-   PF's max queue is 64::
+   enable multi-queues. In general, PF's max queue is 64::
 
     ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
-    --pkt-filter-mode=perfect
 
 Load/delete dynamic device personalization
 ==========================================
@@ -620,485 +617,3 @@ Test Case: RSS for PPPoL2TP IPv4 according to dport
 
      p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
      IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4001, dport=8000)/Raw('x' * 20)
-
-Test Case: Flow director for PPPoE with default input set
-=========================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoE PAY flow type id 30 to pcytpe id 17 mapping item::
-
-    testpmd> port config 0 pctype mapping update 17 30
-
-3. Start testpmd, set fwd rxonly, enable output print
-
-4. Send PPPoE packets, check to receive packet from queue 0::
-
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:01")/
-    PPPoE(sessionid=0x7)
-
-5. Use scapy to generate PPPoE raw packet test_pppoe.raw,
-   source/destination address should be swapped in the template
-   and traffic packets::
-
-    a=Ether(dst="3C:FD:FE:A3:A0:01", src="4C:FD:FE:A3:A0:01")/
-    PPPoE(sessionid=0x7)
-
-6. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 30 fwd queue 36 fd_id 1
-    packet test_pppoe.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:01")/
-    PPPoE(sessionid=0x7)
-
-8. Default flow director input set are MAC SA and session ID, send non-matched
-   SA, sessionid, check to receive packet from queue 0::
-
-    p=Ether(src="3C:FD:FE:A3:A0:02", dst="4C:FD:FE:A3:A0:01")/
-    PPPoE(sessionid=0x7)
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:01")/
-    PPPoE(sessionid=0x8)
-
-9. Send non-matched MAC DA, check to receive packet from queue 36::
-
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:02")/
-    PPPoE(sessionid=0x7)
-
-Test Case: Flow director for PPPoE IPv4 with default input set
-==============================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoE IPv4 flow type id 28 to pcytpe id 15 mapping item::
-
-    testpmd> port config 0 pctype mapping update 15 28
-
-3. Start testpmd, set fwd rxonly, enable output print
-
-4. Send PPPoE IPv4 packets, check to receive packet from queue 0::
-
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=4000,dport=8000)/Raw('x' * 20)
-
-5. Use scapy to generate PPPoE IPv4 raw packet test_pppoe.raw,
-   source/destination address and port should be swapped in the template
-   and traffic packets::
-
-    a=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(dst="1.1.1.1",
-    src="2.2.2.2")/UDP(dport=4000,sport=8000)/Raw('x' * 20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 28 fwd queue 36 fd_id
-    1 packet test_pppoe.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=4000,dport=8000)/Raw('x' * 20)
-
-8. Send non-matched inner src IP, inner dst IP, sport, dport packets, check to
-   receive packet from queue 0::
-
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(src="1.1.1.2",
-    dst="2.2.2.2")/UDP(sport=4000,dport=8000)/Raw('x' * 20)
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(src="1.1.1.1",
-    dst="2.2.2.3")/UDP(sport=4000,dport=8000)/Raw('x' * 20)
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=4001,dport=8000)/Raw('x' * 20)
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=4000,dport=8001)/Raw('x' * 20)
-
-9. Send non-matched sessionid packets, check to receive packet from queue 36::
-
-    p=Ether()/PPPoE(sessionid=0x8)/PPP(proto=0x21)/IP(src="1.1.1.1",
-    dst="2.2.2.2")/UDP(sport=4000,dport=8000)/Raw('x' * 20)
-
-Test Case: Flow director for PPPoE IPv6 with default input set
-==============================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoE IPv6 flow type id 29 to pcytpe id 16 mapping item::
-
-    testpmd> port config 0 pctype mapping update 16 29
-
-3. Start testpmd, set fwd rxonly, enable output print
-
-4. Send PPPoE IPv6 packets, check to receive packet from queue 0::
-
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000,dport=8000)/Raw('x' * 20)
-
-5. Use scapy to generate PPPoE IPv4 raw packet test_pppoe.raw,
-   source/destination address and port should be swapped in the template
-   and traffic packets::
-
-    a=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(dport=4000,sport=8000)/Raw('x' * 20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 29 fwd queue 36 fd_id 1
-    packet test_pppoe.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000,dport=8000)/Raw('x' * 20)
-
-8. Send non-matched inner src IPv6, inner dst IPv6, sport, dport packets,
-   check to receive packet from queue 0::
-
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000,dport=8000)/Raw('x' * 20)
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
-    UDP(sport=4000,dport=8000)/Raw('x' * 20)
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4001,dport=8000)/Raw('x' * 20)
-    p=Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000,dport=8001)/Raw('x' * 20)
-
-9. Send non-matched sessionid packets, check to receive packet from queue 36::
-
-    p=Ether()/PPPoE(sessionid=0x8)/PPP(proto=0x57)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000,dport=8000)/Raw('x' * 20)
-
-Test Case: Flow director for L2TPv2 PAY with default input set
-==============================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update L2TP PAY flow type id 26 to pcytpe id 21 mapping item::
-
-    testpmd> port config 0 pctype mapping update 21 26
-
-3. Start testpmd, set fwd rxonly, enable output print
-
-4. Send L2TP PAY packets, check to receive packet from queue 0::
-
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:01")/IP()/
-    UDP(dport=1701, sport=1701)/L2TP(sessionid=0x7)/Raw('x' * 20)
-
-5. Use scapy to generate L2TP PAY raw packet test_l2tp.raw,
-   source/destination address should be swapped in the template
-   and traffic packets::
-
-    a=Ether(dst="3C:FD:FE:A3:A0:01", src="4C:FD:FE:A3:A0:01")/IP()/
-    UDP(dport=1701, sport=1701)/L2TP(sessionid=0x7)/Raw('x' * 20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 26 fwd queue 36 fd_id 1
-    packet test_l2tp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:01")/IP()/
-    UDP(dport=1701, sport=1701)/L2TP(sessionid=0x7)/Raw('x' * 20)
-
-8. Default flow director input set are MAC SA and session ID, send non-matched
-   SA, sessionid, check to receive packet from queue 0::
-
-    p=Ether(src="3C:FD:FE:A3:A0:02", dst="4C:FD:FE:A3:A0:01")/IP()/
-    UDP(dport=1701, sport=1701)/L2TP(sessionid=0x7)/Raw('x' * 20)
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:01")/IP()/
-    UDP(dport=1701, sport=1701)/L2TP(sessionid=0x8)/Raw('x' * 20)
-
-9. Send non-matched MAC DA, check to receive packet from queue 36::
-
-    p=Ether(src="3C:FD:FE:A3:A0:01", dst="4C:FD:FE:A3:A0:02")/IP()/
-    UDP(dport=1701, sport=1701)/L2TP(sessionid=0x7)/Raw('x' * 20)
-
-Test Case: Flow director for PPPoL2TP IPv4 with default input set
-=================================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoL2TP IPv4 flow type id 23 to pcytpe id 18 mapping item::
-
-    testpmd> port config 0 pctype mapping update 18 23
-
-3. Start testpmd, set fwd rxonly, enable output print
-
-4. Send PPPoL2TP IPv4 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-5. Use scapy to generate PPPoL2TP IPv4 raw packet test_pppol2tp.raw,
-   source/destination address and port should be swapped in the template
-   and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(dst="1.1.1.1",src="2.2.2.2")/UDP(dport=4000, sport=8000)/Raw('x' * 20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36 fd_id 1
-    packet test_pppol2tp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-8. Send non-matched inner src IP, inner dst IP, sport, dport packets, check to
-   receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.2",dst="2.2.2.2")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.3")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4001, dport=8000)/Raw('x' * 20)
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4000, dport=8001)/Raw('x' * 20)
-
-Test Case: Flow director for PPPoL2TP IPv6 with default input set
-=================================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoL2TP IPv6 flow type id 24 to pcytpe id 19 mapping item::
-
-    testpmd> port config 0 pctype mapping update 19 24
-
-3. Start testpmd, set fwd rxonly, enable output print
-
-4. Send PPPoL2TP IPv6 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-5. Use scapy to generate PPPoL2TP IPv6 raw packet test_pppol2tp.raw,
-   source/destination address and port should be swapped in the template
-   and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(dport=4000, sport=8000)/Raw('x' * 20)
-
-6. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 24 fwd queue 36
-    fd_id 1 packet test_pppol2tp.raw
-
-7. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-8. Send non-matched inner src IPv6, inner dst IPv6, sport, dport packets,
-   check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000, dport=8000)/Raw('x' * 20)
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
-    UDP(sport=4000, dport=8000)/Raw('x' * 20)
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4001, dport=8000)/Raw('x' * 20)
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000, dport=8001)/Raw('x' * 20)
-
-Test Case: Flow director for PPPoL2TP IPv4 according to inner destination IPv4
-==============================================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoL2TP IPv4 flow type id 23 to pcytpe id 18 mapping item::
-
-    testpmd> port config 0 pctype mapping update 18 23
-
-3. Reset PPPoL2TP IPv4 flow director input set configuration::
-
-    testpmd> port config 0 pctype 18 fdir_inset clear all
-
-4. Inner dst IP words are 27 and 28, enable flow director input set
-   for them::
-
-    testpmd> port config 0 pctype 18 fdir_inset set field 27
-    testpmd> port config 0 pctype 18 fdir_inset set field 28
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send PPPoL2TP IPv4 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-7. Use scapy to generate PPPoL2TP IPv4 raw packet test_pppol2tp.raw,
-   source/destination address and port should be swapped in the template
-   and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(dst="1.1.1.1",src="2.2.2.2")/UDP(dport=4000, sport=8000)/Raw('x' * 20)
-
-8. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 23 fwd queue 36
-    fd_id 1 packet test_pppol2tp.raw
-
-9. Send matched swapped traffic packet, check to receive packet from
-   configured queue 36::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-    IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-10. Send matched inner dst IP, but non-matched inner src IP, sport,
-    dport packets, check to receive packet from queue 36::
-
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-     IP(src="1.1.1.2",dst="2.2.2.2")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-     IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4001, dport=8000)/Raw('x' * 20)
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-     IP(src="1.1.1.1",dst="2.2.2.2")/UDP(sport=4000, dport=8001)/Raw('x' * 20)
-
-11. Send non-matched inner dst IP packets, check to receive packet from
-    queue 0::
-
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0021)/
-     IP(src="1.1.1.1",dst="2.2.2.3")/UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-Test Case: Flow director for PPPoL2TP IPv6 according to inner destination IPv6
-==============================================================================
-
-1. Check flow type to pctype mapping::
-
-    testpmd> show port 0 pctype mapping
-
-2. Update PPPoL2TP IPv6 flow type id 24 to pcytpe id 19 mapping item::
-
-    testpmd> port config 0 pctype mapping update 19 24
-
-3. Reset PPPoL2TP IPv6 flow director input set configuration::
-
-    testpmd> port config 0 pctype 19 fdir_inset clear all
-
-4. Inner dst IPv6 words are 21~28, enable flow director input set
-   for them::
-
-    testpmd> port config 0 pctype 19 fdir_inset set field 21
-    testpmd> port config 0 pctype 19 fdir_inset set field 22
-    testpmd> port config 0 pctype 19 fdir_inset set field 23
-    testpmd> port config 0 pctype 19 fdir_inset set field 24
-    testpmd> port config 0 pctype 19 fdir_inset set field 25
-    testpmd> port config 0 pctype 19 fdir_inset set field 26
-    testpmd> port config 0 pctype 19 fdir_inset set field 27
-    testpmd> port config 0 pctype 19 fdir_inset set field 28
-
-5. Start testpmd, set fwd rxonly, enable output print
-
-6. Send PPPoL2TP IPv6 packets, check to receive packet from queue 0::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-7. Use scapy to generate PPPoL2TP IPv6 raw packet test_pppol2tp.raw,
-   source/destination address and port should be swapped in the template
-   and traffic packets::
-
-    a=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(dport=4000, sport=8000)/Raw('x' * 20)
-
-8. Setup raw flow type filter for flow director, configured queue is random
-   queue between 0~63, such as 36::
-
-    testpmd> flow_director_filter 0 mode raw add flow 24 fwd queue 36
-    fd_id 1 packet test_pppol2tp.raw
-
-9. Send matched swapped traffic packet, check receive packet from
-   configured queue 36::
-
-    p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-    IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-    dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-    UDP(sport=4000, dport=8000)/Raw('x' * 20)
-
-10. Send matched inner dst IPv6, but non-matched inner src IPv6,
-    sport, dport packets, check to receive packet from queue 36::
-
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0002",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=4000, dport=8000)/Raw('x' * 20)
-     p=(Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=4001, dport=8000)/Raw('x' * 20)
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/
-     UDP(sport=4000, dport=8001)/Raw('x' * 20)
-
-11. Send non-matched inner dst IPv6 packets, check to receive packet
-    from queue 0::
-
-     p=Ether()/IP()/UDP(dport=1701, sport=1701)/PPP_L2TP(proto=0x0057)/
-     IPv6(src="1001:0db8:85a3:0000:0000:8a2e:0370:0001",
-     dst="2001:0db8:85a3:0000:0000:8a2e:0370:0002")/
-     UDP(sport=4000, dport=8000)/Raw('x' * 20)
-- 
2.17.1

[dts][PATCH V1 6/8] tests/ddp_ppp_l2tp: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration) remove flow_director_filter raw pkt test case.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 tests/TestSuite_ddp_ppp_l2tp.py | 162 +-------------------------------
 1 file changed, 1 insertion(+), 161 deletions(-)

diff --git a/tests/TestSuite_ddp_ppp_l2tp.py b/tests/TestSuite_ddp_ppp_l2tp.py
index c0890a48..7353fb1c 100644
--- a/tests/TestSuite_ddp_ppp_l2tp.py
+++ b/tests/TestSuite_ddp_ppp_l2tp.py
@@ -55,7 +55,7 @@ class TestDdpPppL2tp(TestCase):
         """
         self.dut_testpmd.start_testpmd(
             "Default",
-            "--pkt-filter-mode=perfect --port-topology=chained \
+            "--port-topology=chained \
             --txq=%s --rxq=%s"
             % (self.PF_QUEUE, self.PF_QUEUE),
         )
@@ -295,60 +295,6 @@ class TestDdpPppL2tp(TestCase):
                 result = "difq"
             self.verify(result == chk, "Faild to verify RSS when key word change!!!")
 
-    def run_fd_test(self, crlwords, flowtype, pctype, keywords, qchecks):
-        """
-        Use dynamic flowtype/pctype mapping, use default or dynamic change
-        control words to set flow director input configuration for new
-        protocol, setup raw flow type filter for flow director, check flow
-        director could work.
-        crlwords: control words of keyword
-        flowtype: define flow type 23~63 values for PPPoE and PPPoL2TPv2 packet
-                  types as test plan table.
-        pctype: profile defines below 14~21 pctypes for PPPoE and PPPoL2TPv2
-                packet types.
-        keywords: keywords have Session ID, S-Port, D-Port, IP SA, IP DA and
-                  etc.
-        qchecks: define sameq and difq. If change keywords, direct packets to
-                 queue 0, otherwise direct packets to same queue.
-        """
-
-        self.pctype_flowtype_mapping(flowtype, pctype)
-        if crlwords is not None:
-            self.dut_testpmd.execute_cmd("port stop all")
-            time.sleep(1)
-            self.dut_testpmd.execute_cmd(
-                "port config 0 pctype %s fdir_inset clear all" % pctype
-            )
-            for word in crlwords:
-                self.dut_testpmd.execute_cmd(
-                    "port config 0 pctype %s fdir_inset set field %s" % (pctype, word)
-                )
-            self.dut_testpmd.execute_cmd("port start all")
-        self.dut_testpmd.execute_cmd("start")
-        qnum = self.send_and_verify(flowtype, "def", "fd")
-        self.verify(qnum == 0, "Receive packet from wrong queue!!!")
-        self.raw_packet_generate(flowtype)
-        queue = random.randint(1, self.PF_QUEUE - 1)
-        self.dut_testpmd.execute_cmd(
-            "flow_director_filter 0 mode raw add flow %d fwd queue %d \
-            fd_id 1 packet /tmp/test.raw"
-            % (flowtype, queue)
-        )
-        qnum = self.send_and_verify(flowtype, "def", "fd")
-        qdef = qnum
-        self.verify(qnum == queue, "Receive packet from wrong queue!!!")
-        for word, chk in zip(keywords, qchecks):
-            qnum = self.send_and_verify(flowtype, word, "fd")
-            if qnum == qdef:
-                result = "sameq"
-            elif qnum == 0:
-                result = "difq"
-            self.verify(
-                result == chk,
-                "Faild to verify flow director when \
-                key word change!!!",
-            )
-
     def test_rss_pppoe(self):
         """
         PPPoE is supported by NVM with profile updated. Download profile then
@@ -481,112 +427,6 @@ class TestDdpPppL2tp(TestCase):
         qchecks = ["difq", "sameq"]
         self.run_rss_test(crlwords, 23, 18, keywords, qchecks)
 
-    def test_fd_pppoe(self):
-        """
-        PPPoE is supported by NVM with profile updated. Download profile then
-        set flowtype/pctype mapping, default flow director input set are MAC
-        SA, session ID, setup raw flow type filter for flow director, check
-        flow director could work when sending matched packets to configured
-        queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_mac", "session_id", "dst_mac"]
-        qchecks = ["difq", "difq", "sameq"]
-        self.run_fd_test(crlwords, 30, 17, keywords, qchecks)
-
-    def test_fd_l2tp(self):
-        """
-        L2TPv2 PAY is supported by NVM with profile updated. Download profile
-        then set flowtype/pctype mapping, default flow director input set are
-        MAC SA, session ID, setup raw flow type filter for flow director, check
-        flow director could work when sending matched packets to configured
-        queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_mac", "session_id", "dst_mac"]
-        qchecks = ["difq", "difq", "sameq"]
-        self.run_fd_test(crlwords, 26, 21, keywords, qchecks)
-
-    def test_fd_pppoe_ipv4(self):
-        """
-        PPPoE IPv4 is supported by NVM with profile updated. Download
-        profile then set flowtype/pctype mapping, default flow director input
-        set are IPv4 SA, IPv4 DA, S-Port, D-Port, setup raw flow type filter
-        for flow director, check flow director could work when sending matched
-        packets to configured queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_ip", "dst_ip", "sport", "dport", "session_id"]
-        qchecks = ["difq", "difq", "difq", "difq", "sameq"]
-        self.run_fd_test(crlwords, 28, 15, keywords, qchecks)
-
-    def test_fd_pppoe_ipv6(self):
-        """
-        PPPoE IPv6 is supported by NVM with profile updated. Download
-        profile then set flowtype/pctype mapping, default flow director input
-        set are IPv6 SA, IPv6 DA, S-Port, D-Port, setup raw flow type filter
-        for flow director, check flow director could work when sending matched
-        packets to configured queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_ipv6", "dst_ipv6", "sport", "dport", "session_id"]
-        qchecks = ["difq", "difq", "difq", "difq", "sameq"]
-        self.run_fd_test(crlwords, 29, 16, keywords, qchecks)
-
-    def test_fd_pppol2tp_ipv4(self):
-        """
-        PPPoL2TPv2 IPv4 is supported by NVM with profile updated. Download
-        profile then set flowtype/pctype mapping, default flow director input
-        set are IPv4 SA, IPv4 DA, S-Port, D-Port, setup raw flow type filter
-        for flow director, check flow director could work when sending matched
-        packets to configured queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_ip", "dst_ip", "sport", "dport"]
-        qchecks = ["difq", "difq", "difq", "difq"]
-        self.run_fd_test(crlwords, 23, 18, keywords, qchecks)
-
-    def test_fd_pppol2tp_ipv6(self):
-        """
-        PPPoL2TPv2 IPv6 is supported by NVM with profile updated. Download
-        profile then set flowtype/pctype mapping, default flow director input
-        set are IPv6 SA, IPv6 DA, S-Port, D-Port, setup raw flow type filter
-        for flow director, check flow director could work when sending matched
-        packets to configured queue, otherwise direct packets to queue 0.
-        """
-        crlwords = None
-        keywords = ["src_ipv6", "dst_ipv6", "sport", "dport"]
-        qchecks = ["difq", "difq", "difq", "difq"]
-        self.run_fd_test(crlwords, 24, 19, keywords, qchecks)
-
-    def test_fd_pppol2tp_ipv4_dstip(self):
-        """
-        PPPoL2TPv2 IPv4 is supported by NVM with profile updated. Download
-        profile then set flowtype/pctype mapping, dynamic to change flow
-        director input set configuration for IPv4 DA words 27~28, setup
-        raw flow type filter for flow director, check flow director could
-        work when sending matched IPv4 DA packets to configured queue,
-        otherwise direct packets to queue 0.
-        """
-        crlwords = list(range(27, 29))
-        keywords = ["src_ip", "sport", "dport", "dst_ip"]
-        qchecks = ["sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 23, 18, keywords, qchecks)
-
-    def test_fd_pppol2tp_ipv6_dstipv6(self):
-        """
-        PPPoL2TPv2 IPv6 is supported by NVM with profile updated. Download
-        profile then set flowtype/pctype mapping, dynamic to change flow
-        director input set configuration for IPv6 DA words 21~28, setup
-        raw flow type filter for flow director, check flow director could
-        work when sending matched IPv6 DA packets to configured queue,
-        otherwise direct packets to queue 0.
-        """
-        crlwords = list(range(21, 29))
-        keywords = ["src_ipv6", "sport", "dport", "dst_ipv6"]
-        qchecks = ["sameq", "sameq", "sameq", "difq"]
-        self.run_fd_test(crlwords, 24, 19, keywords, qchecks)
-
     def tear_down(self):
         self.dut_testpmd.execute_cmd("stop")
         out = self.dut_testpmd.execute_cmd("ddp get list 0")
-- 
2.17.1

[dts][PATCH V1 7/8] test_plans/rss_to_rte_flow: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration)
remove --pkt-filter-mode.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 test_plans/rss_to_rte_flow_test_plan.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/test_plans/rss_to_rte_flow_test_plan.rst b/test_plans/rss_to_rte_flow_test_plan.rst
index 367ff863..007bd98f 100644
--- a/test_plans/rss_to_rte_flow_test_plan.rst
+++ b/test_plans/rss_to_rte_flow_test_plan.rst
@@ -557,7 +557,7 @@ Test case: Flow directory rule and RSS rule combination (I40E)
 
 1. Start the testpmd::
 
-    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -921,7 +921,7 @@ Test case: Flow directory rule and RSS rule combination
 
 1. Start the testpmd::
 
-    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
-- 
2.17.1

[dts][PATCH V1 8/8] tests/rss_to_rte_flow: remove --pkt-filter-mode sync dpdk change

[Lingli Chen]

According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration)
remove --pkt-filter-mode.

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 tests/TestSuite_rss_to_rte_flow.py | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/tests/TestSuite_rss_to_rte_flow.py b/tests/TestSuite_rss_to_rte_flow.py
index 29faa5c4..7d2bfa9b 100644
--- a/tests/TestSuite_rss_to_rte_flow.py
+++ b/tests/TestSuite_rss_to_rte_flow.py
@@ -1173,9 +1173,7 @@ class TestRSS_to_Rteflow(TestCase):
             ],
             "NIC Unsupported: " + str(self.nic),
         )
-        self.pmdout.start_testpmd(
-            "%s" % self.cores, "--rxq=8 --txq=8 --pkt-filter-mode=perfect"
-        )
+        self.pmdout.start_testpmd("%s" % self.cores, "--rxq=8 --txq=8")
         self.dut.send_expect("set fwd rxonly", "testpmd> ", 120)
         self.dut.send_expect("set verbose 1", "testpmd> ", 120)
         self.dut.send_expect("start", "testpmd> ", 120)
@@ -1833,9 +1831,7 @@ class TestRSS_to_Rteflow(TestCase):
                 "--rxq=4 --txq=4 --disable-rss --port-topology=chained",
             )
         else:
-            self.pmdout.start_testpmd(
-                "%s" % self.cores, "--rxq=8 --txq=8 --pkt-filter-mode=perfect"
-            )
+            self.pmdout.start_testpmd("%s" % self.cores, "--rxq=8 --txq=8")
         self.dut.send_expect("set fwd rxonly", "testpmd> ", 120)
         self.dut.send_expect("set verbose 1", "testpmd> ", 120)
         self.dut.send_expect("start", "testpmd> ", 120)
-- 
2.17.1

RE: [dts][PATCH V1 8/8] tests/rss_to_rte_flow: remove --pkt-filter-mode sync dpdk change

[Li, WeiyuanX]

> -----Original Message-----
> From: Lingli Chen <linglix.chen@intel.com>
> Sent: Thursday, December 15, 2022 2:42 PM
> To: dts@dpdk.org
> Cc: Huang, ZhiminX <zhiminx.huang@intel.com>; Chen, LingliX
> <linglix.chen@intel.com>
> Subject: [dts][PATCH V1 8/8] tests/rss_to_rte_flow: remove --pkt-filter-
> mode sync dpdk change
> 
> According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow
> Director configuration) remove --pkt-filter-mode.
> 
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
> ---
Tested-by: Weiyuan Li <weiyuanx.li@intel.com>

[dts][PATCH V1 6/8] tests/ddp_ppp_l2tp: remove --pkt-filter-mode sync dpdk change

[lijuan.tu]

On Thu, 15 Dec 2022 01:42:02 -0500, Lingli Chen <linglix.chen@intel.com> wrote:
> According to dpdk commit 5007ac1318 (ethdev: remove deprecated Flow Director configuration) remove flow_director_filter raw pkt test case.
> 
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>

Acked-by: Lijuan Tu <lijuan.tu@intel.com>
Series applied, thanks