test suite reviews and discussions
 help / color / mirror / Atom feed
From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Chen, BoX C" <box.c.chen@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Chen, BoX C" <box.c.chen@intel.com>
Subject: Re: [dts] [PATCH V1] tests/generic_filter: use flow api replace legancy
Date: Wed, 26 May 2021 06:13:59 +0000	[thread overview]
Message-ID: <5a86851a1fe44435b96bb6bdac92ed4c@intel.com> (raw)
In-Reply-To: <20210506151015.418101-1-BoX.C.Chen@intel.com>



> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Bo Chen
> Sent: 2021年5月6日 23:10
> To: dts@dpdk.org
> Cc: Chen, BoX C <box.c.chen@intel.com>
> Subject: [dts] [PATCH V1] tests/generic_filter: use flow api replace legancy
> 
> use flow api replace legancy filter command
> 
> Signed-off-by: Bo Chen <BoX.C.Chen@intel.com>
> ---
>  tests/TestSuite_generic_filter.py | 41 ++++++++++++++++++-------------
>  1 file changed, 24 insertions(+), 17 deletions(-)
> 
> diff --git a/tests/TestSuite_generic_filter.py b/tests/TestSuite_generic_filter.py
> index d4ea8926..f3ea9774 100644
> --- a/tests/TestSuite_generic_filter.py
> +++ b/tests/TestSuite_generic_filter.py
> @@ -119,6 +119,12 @@ class TestGeneric_filter(TestCase):
>          """
>          Run before each test case.
>          """
> +        if self._suite_result.test_case == "test_128_queues":
> +            print('will rebuild dpdk')

Should use self.logger.info

> +            self.dut.send_expect(
> +                "sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES
> 64$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 128/'
> drivers/net/ixgbe/ixgbe_ethdev.h",
> +                "# ", 30)
> +            self.dut.build_install_dpdk(self.target)
>          pass
> 
>      def filter_send_packet(self, type):
> @@ -711,8 +717,6 @@ class TestGeneric_filter(TestCase):
>          set_filter_flag = 1
>          packet_flag = 1
>          if self.kdriver == "ixgbe":
> -            self.dut.send_expect("sed -i -e 's/#define
> IXGBE_NONE_MODE_TX_NB_QUEUES 64$/#define
> IXGBE_NONE_MODE_TX_NB_QUEUES 128/' drivers/net/ixgbe/ixgbe_ethdev.h",
> "# ",30)
> -            self.dut.build_install_dpdk(self.target)
>              global valports
>              total_mbufs = self.request_mbufs(128) * len(valports)
>              self.pmdout.start_testpmd(
> @@ -729,7 +733,6 @@ class TestGeneric_filter(TestCase):
>                  "vlan set filter off %s" % valports[0], "testpmd> ")
>              self.dut.send_expect(
>                  "vlan set filter off %s" % valports[1], "testpmd> ")
> -            frames_to_send = 1
>              queue = ['64', '127', '128']
> 
>              for i in [0, 1, 2]:
> @@ -739,35 +742,34 @@ class TestGeneric_filter(TestCase):
>                      if 'Invalid RX queue %s' % (queue[i]) not in out:
>                          set_filter_flag = 0
>                          break
> -                    out = self.dut.send_expect(
> -                        "5tuple_filter %s add dst_ip 2.2.2.5 src_ip 2.2.2.4 dst_port %s
> src_port 1 protocol 0x06 mask 0x1f tcp_flags 0x0 priority 3 queue %s " %
> (valports[0], (i + 1), queue[i]), "testpmd> ")
> -                    if 'error' not in out:
> +                    cmd = "flow create {} ingress pattern eth / ".format(
> +                        valports[0]) + "ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is {} src is 1
> / ".format(
> +                        i + 1) + "end actions queue index {} / end".format(queue[i])
> +                    out = self.dut.send_expect(cmd, "testpmd> ")
> +                    if 'Invalid argument' not in out:
>                          set_filter_flag = 0
>                          break
>                      continue
>                  else:
>                      self.dut.send_expect("set stat_qmap rx %s %s %s" %
>                                           (valports[0], queue[i], (i + 1)), "testpmd> ")
> -                    out = self.dut.send_expect("5tuple_filter %s add dst_ip 2.2.2.5 src_ip
> 2.2.2.4 dst_port %s src_port 1 protocol 0x06 mask 0x1f tcp_flags 0x0 priority %d
> queue %s " % (
> -                        valports[0], (i + 1), (3 - i), queue[i]), "testpmd> ")
> +                    cmd = "flow create {} ingress pattern eth / ".format(
> +                        valports[0]) + "ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is {} src is 1
> / ".format(
> +                        i + 1) + "end actions queue index {} / end".format(queue[i])
> +                    self.dut.send_expect(cmd, "testpmd> ")
>                      self.dut.send_expect("start", "testpmd> ", 120)
>                  global filters_index
>                  filters_index = i
>                  self.filter_send_packet("packet")
>                  time.sleep(1)
>                  out = self.dut.send_expect("stop", "testpmd> ")
> -                cmd = "Stats reg  %s RX-packets:             ([0-9]+)" % (
> -                    i + 1)
> -                result_scanner = r"%s" % cmd
> -                scanner = re.compile(result_scanner, re.DOTALL)
> -                m = scanner.search(out)
> -                cur_pkt = m.group(1)
> -                if int(cur_pkt) != frames_to_send:
> +                p = re.compile(r"Forward Stats for RX Port= \d+/Queue=(\s?\d+)")
> +                res = p.findall(out)
> +                queues = [int(i) for i in res]
> +                if queues[0] != int(queue[i]):
>                      packet_flag = 0
>                      break
>              self.dut.send_expect("quit", "#", timeout=30)
> -            self.dut.send_expect("sed -i -e 's/#define
> IXGBE_NONE_MODE_TX_NB_QUEUES 128$/#define
> IXGBE_NONE_MODE_TX_NB_QUEUES 64/' drivers/net/ixgbe/ixgbe_ethdev.h",
> "# ",30)
> -            self.dut.build_install_dpdk(self.target)
>              self.verify(set_filter_flag == 1, "set filters error")
>              self.verify(packet_flag == 1, "packet pass assert error")
>          else:
> @@ -853,6 +855,11 @@ class TestGeneric_filter(TestCase):
>          Run after each test case.
>          """
>          self.dut.kill_all()
> +        if self._suite_result.test_case == "test_128_queues":
> +            self.dut.send_expect(
> +                "sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES
> 128$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 64/'
> drivers/net/ixgbe/ixgbe_ethdev.h",
> +                "# ", 30)
> +            self.dut.build_install_dpdk(self.target)
> 
>      def tear_down_all(self):
>          pass
> --
> 2.31.1


  parent reply	other threads:[~2021-05-26  6:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 15:10 Bo Chen
2021-05-06  7:14 ` Chen, BoX C
2021-05-26  6:13 ` Tu, Lijuan [this message]
2021-05-26 11:17 ` David Marchand
2021-05-27  2:14   ` Honnappa Nagarahalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5a86851a1fe44435b96bb6bdac92ed4c@intel.com \
    --to=lijuan.tu@intel.com \
    --cc=box.c.chen@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).