* [dts][PATCH V1] test_plans/vswitch_sample_dsa: delete testplan
@ 2022-12-28 8:50 Wei Ling
2023-01-04 1:39 ` lijuan.tu
0 siblings, 1 reply; 2+ messages in thread
From: Wei Ling @ 2022-12-28 8:50 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
As the SPR platform plugined NIC are all E810 series, and the E810
series NIC unsupport VMDQ, so used the testpmd to test the vhsot
aync data-path.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/index.rst | 1 -
test_plans/vswitch_sample_dsa_test_plan.rst | 866 --------------------
2 files changed, 867 deletions(-)
delete mode 100644 test_plans/vswitch_sample_dsa_test_plan.rst
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 9ca954e2..2d749381 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -232,7 +232,6 @@ The following are the test plans for the DPDK DTS automated test system.
dpdk_gso_lib_test_plan
vswitch_sample_cbdma_test_plan
vswitch_pvp_multi_paths_performance_with_cbdma_test_plan
- vswitch_sample_dsa_test_plan
vxlan_gpe_support_in_i40e_test_plan
pvp_diff_qemu_version_test_plan
pvp_share_lib_test_plan
diff --git a/test_plans/vswitch_sample_dsa_test_plan.rst b/test_plans/vswitch_sample_dsa_test_plan.rst
deleted file mode 100644
index 1641e051..00000000
--- a/test_plans/vswitch_sample_dsa_test_plan.rst
+++ /dev/null
@@ -1,866 +0,0 @@
-.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2022 Intel Corporation
-
-====================================================================
-Vswitch sample test vhost async operation with DSA driver test plan
-====================================================================
-
-Vswitch sample can leverage DMA to accelerate vhost async data-path from dpdk 20.11. This plan test
-vhost async operation with dsa driver (kernel IDXD driver and DPDK vfio-pci driver) in vhost sample.
-For more about vswitch example, please refer to the DPDK docment:http://doc.dpdk.org/guides/sample_app_ug/vhost.html
-
-Note:
-1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1, and packed ring multi-queues not support reconnect in qemu yet.
-2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version >= 5.2.0, dut to old qemu exist reconnect issue when multi-queues test.
-3.The suite has not yet been automated.
-
-Prerequisites
-=============
-
-Software
---------
-Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
-qemu: https://download.qemu.org/qemu-6.2.0.tar.xz
-iperf
-
-General set up
---------------
-1. Compile DPDK and vhost example::
-
- # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
- # meson configure -Dexamples=vhost <dpdk build dir>
- # ninja -C <dpdk build dir> -j 110
- For example,
- CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc
- ninja -C x86_64-native-linuxapp-gcc -j 110
-
-2. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -s
-
- Network devices using kernel driver
- ===================================
- 0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci
-
- DMA devices using kernel driver
- ===============================
- 0000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci
- 0000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci
-
-Test case
-=========
-
-Common steps
-------------
-1. Bind 1 NIC port to vfio-pci::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
- For example:
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:4f.1
-
-2.Bind DSA devices to DPDK vfio-pci driver::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DSA device id>
- For example, bind 2 DMA devices to vfio-pci driver:
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0
-
-.. note::
-
- One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and
- eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues” is 1~8:
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i
-
-3. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq> <numDevices>
-
-.. note::
-
- Better to reset WQ when need operate DSA devices that bound to idxd drvier:
- <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices * 2>
- You can check it by 'ls /dev/dsa'
- numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
- numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8
-
- For example, bind 2 DMA devices to idxd driver and configure WQ:
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
- Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3"
-
-Test Case 1: PVP performance vhost async enqueue operation with dsa dpdk channel
----------------------------------------------------------------------------------
-This case uses vhost example to test performance of split and packed ring when vhost uses the asynchronous enqueue operations
-with dsa dpdk driver in PVP topology environment.
-
-1. Bind one physical port(4f:00.1) and one dsa device(6a:01.0) to vfio-pci like common step 1-2.
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.0 -a 0000:6a:01.0,max_queues=1 -- \
- -p 0x1 --mergeable 1 --vm2vm 1 --stats 1 --socket-file /tmp/vhost-net --dmas [txd0@0000:6a:01.0-q0] --client
-
-3. Launch virtio-user with packed ring::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=virtio-user \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,packed_vq=1,server=1 \
- -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-4. Start pkts from virtio-user side to let vswitch know the mac addr::
-
- testpmd>set fwd mac
- testpmd>start tx_first
- testpmd>stop
- testpmd>start
-
-5. Inject pkts (packets length=64...1518) separately with dest_mac=virtio_mac_addresss (specific in above cmd with 00:11:22:33:44:10) to NIC using packet generator, record pvp (PG>nic>vswitch>virtio-user>vswitch>nic>PG) performance number can get expected.
-
-6. Quit and re-launch virtio-user with packed ring size not power of 2::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,packed_vq=1,server=1,queue_size=1025 -- -i --rxq=1 --txq=1 --txd=1025 --rxd=1025 --nb-cores=1
-
-7. Re-test step 4-5, record performance of different packet length.
-
-8. Quit and re-launch virtio-user with split ring::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,server=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-9. Re-test step 4-5, record performance of different packet length.
-
-Test Case 2: PVP vhost async enqueue operation with two VM and 2 dsa channels
-------------------------------------------------------------------------------
-This case uses vhost example to test split and packed ring when vhost uses the asynchronous enqueue operations
-with dsa dpdk driver in PVP topology environment with 2 VM and 2 queues.
-
-1. Bind one physical port and 2 dsa devices to vfio-pci like common step 1-2.
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:18:00.0 -a 0000:6a:01.0,max_queues=2 -a 0000:6f:01.0,max_queues=1 -- \
- -p 0x1 --mergeable 1 --vm2vm 1 --stats 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 --dmas [txd0@0000:6a:01.0-q1,txd1@0000:6f:01.0-q0] --client
-
-3. launch two virtio-user ports::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=0,packed_vq=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 7-8 -n 4 --no-pci --file-prefix=testpmd1 \
- --vdev=net_virtio_user1,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-4. Start pkts from two virtio-user side individually to let vswitch know the mac addr::
-
- testpmd0>set fwd mac
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>start
- testpmd1>set fwd mac
- testpmd1>start tx_first
- testpmd1>stop
- testpmd1>start
-
-5. Inject IMIX packets (64b...1518b) with dest_mac=virtio_mac_addresss (00:11:22:33:44:10 and 00:11:22:33:44:11) to NIC using packet generator,record performance number can get expected from Packet generator rx side.
-
-6. Stop dpdk-vhost side and relaunch it with same cmd as step2.
-
-7. Start pkts from two virtio-user side individually to let vswitch know the mac addr::
-
- testpmd0>stop
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>start
- testpmd1>stop
- testpmd1>start tx_first
- testpmd1>stop
- testpmd1>start
-
-8. Inject IMIX packets (64b...1518b) with dest_mac=virtio_mac_addresss (00:11:22:33:44:10 and 00:11:22:33:44:11) to NIC using packet generator, ensure get same throughput as step5.
-
-Test Case 3: VM2VM virtio-user forwarding test with 2 dsa dpdk channels
--------------------------------------------------------------------------
-This case uses vhost example to test that split and packed ring can forwarding packets normally when vhost uses the
-asynchronous enqueue operations with dsa dpdk driver in VM2VM virtio-user topology environment with 2 queues.
-
-1.Bind one physical ports and 1 dsa devices to vfio-pci like common step 1-2.
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:18:00.0 -a 0000:6a:01.0,max_queues=2 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@0000:6a:01.0-q0,txd1@0000:6a:01.0-q1] --client
-
-3. Launch virtio-user::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=0,packed_vq=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 7-8 -n 4 --no-pci --file-prefix=testpmd1 \
- --vdev=net_virtio_user1,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-4. Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected::
-
- testpmd0>set fwd mac
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>set eth-peer 0 00:11:22:33:44:11
- testpmd0>start
- testpmd1>set fwd mac
- testpmd1>set eth-peer 0 00:11:22:33:44:10
- testpmd1>set txpkts 64
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000,2000,2000,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 64,256,2000,64,256,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
-
-5. Stop and quit dpdk-vhost side and relaunch it with same cmd as step2.
-
-6. Rerun step 4.
-
-Test Case 4: VM2VM virtio-pmd test with 2 dsa channels register/unregister stable check
--------------------------------------------------------------------------------------------------
-This case checks vhost can work stably after registering and unregistering the virtio port many times when vhost uses
-the asynchronous enqueue operations with dsa dpdk driver in VM2VM topology environment with 2 queues.
-
-1. Bind one physical port and one dsa device to vfio-pci like common step 1-2::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=2 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@0000:6a:01.0-q0,txd1@0000:6a:01.0-q1] --client
-
-3. Start VM1 with qemu::
-
- taskset -c 5,6 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
-
-4. Start VM2 with qemu::
-
- taskset -c 7,8 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-
-5. Bind virtio port to vfio-pci in both two VMs::
-
- modprobe vfio enable_unsafe_noiommu_mode=1
- modprobe vfio-pci
- echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
- ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
-
-6. Start testpmd in VMs seperately::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
-
-7. Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected::
-
- testpmd0>set fwd mac
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>set eth-peer 0 52:54:00:00:00:02
- testpmd0>start
- testpmd1>set fwd mac
- testpmd1>set eth-peer 0 52:54:00:00:00:01
- testpmd1>set txpkts 64
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000,2000,2000,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 64,256,2000,64,256,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
-
-8. Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times::
-
- ./usertools/dpdk-devbind.py -u 00:05.0
- ./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0
- ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
-
-9. Restart vhost, then rerun step 6-7，check vhost can stable work and get expected throughput.
-
-Test Case 5: VM2VM split ring with 2 enqueue dsa dpdk channels test with iperf and reconnect stable check
------------------------------------------------------------------------------------------------------------
-This case checks vhost can work stably after reconnecting when vhost uses the asynchronous enqueue operations with
-dsa dpdk driver in VM2VM topology environment with 2 queues.
-
-1. Bind one physical port and 1 dsa device to vfio-pci like common step 1-2::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=2 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@0000:6a:01.0-q0,txd1@0000:6a:01.0-q1] --client
-
-3. Start VM1 with qemu::
-
- taskset -c 5,6 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
-
-4. Start VM2 with qemu::
-
- taskset -c 7,8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
-
-5. On VM1, set virtio device IP and run arp protocal::
-
- <VM1># ifconfig ens5 1.1.1.2
- <VM1># arp -s 1.1.1.8 52:54:00:00:00:02
-
-6. On VM2, set virtio device IP and run arp protocal::
-
- <VM2># ifconfig ens5 1.1.1.8
- <VM2># arp -s 1.1.1.2 52:54:00:00:00:01
-
-7. Check the iperf performance between two VMs by below commands::
-
- <VM1># iperf -s -i 1
- <VM2># iperf -c 1.1.1.2 -i 1 -t 60
-
-8. Check iperf throughput can get x Gbits/sec.
-
-9. Scp 1MB file form VM0 to VM1, check packets can be forwarding success by scp::
-
- <VM1># scp <file> root@1.1.1.8:/
-
-10. Relaunch dpdk-vhost, then rerun step 7-9 five times.
-
-11. Relaunch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=2 -a 0000:6f:01.0,max_queues=2 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@0000:6a:01.0-q0,txd1@0000:6f:01.0-q1] --client
-
-12. Rerun step 7-9 five times.
-
-Test Case 6: VM2VM packed ring with 2 dsa dpdk channels stable test with iperf
--------------------------------------------------------------------------------
-This case checks vhost can work stably when vhost uses the asynchronous enqueue operations with dsa dpdk driver in
-VM2VM topology environment with 2 queues.
-
-1. Bind one physical port and 1 dsa device to vfio-pci like common step 1-2::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
-
-2. Launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=2 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@0000:6a:01.0-q1,txd1@0000:6a:01.0-q0]
-
-3. Start VM1 with qemu::
-
- taskset -c 5,6 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
-
-4. Start VM2 with qemu::
-
- taskset -c 7,8 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-
-5. On VM1, set virtio device IP and run arp protocal::
-
- <VM1># ifconfig ens5 1.1.1.2
- <VM1># arp -s 1.1.1.8 52:54:00:00:00:02
-
-6. On VM2, set virtio device IP and run arp protocal::
-
- <VM2># ifconfig ens5 1.1.1.8
- <VM2># arp -s 1.1.1.2 52:54:00:00:00:01
-
-7. Check the iperf performance between two VMs by below commands::
-
- <VM1># iperf -s -i 1
- <VM2># iperf -c 1.1.1.2 -i 1 -t 60
-
-8. Check iperf throughput can get x Gbits/sec.
-
-9. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
-
- <VM1># scp <file> root@1.1.1.8:/
-
-10. Rerun step 7-9 five times.
-
-Test Case 7: PVP performance vhost async enqueue with dsa kernel channel
--------------------------------------------------------------------------
-This case uses vhost example to test performance of split and packed ring when vhost uses the asynchronous enqueue operations
-with dsa kernel driver in PVP topology environment.
-
-1. Bind one physical port(4f:00.1) to vfio-pci and one dsa device(6a:01.0) to idxd like common step 1 and 3::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-
- ls /dev/dsa #check wq configure, reset if exist
- <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
- ls /dev/dsa #check wq configure success
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.0 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --stats 1 --socket-file /tmp/vhost-net --dmas [txd0@wq0.0] --client
-
-3. Launch virtio-user with packed ring::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=virtio-user \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,packed_vq=1,server=1 \
- -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-4. Start pkts from virtio-user side to let vswitch know the mac addr::
-
- testpmd>set fwd mac
- testpmd>start tx_first
- testpmd>stop
- testpmd>start
-
-5. Inject pkts (packets length=64...1518) separately with dest_mac=virtio_mac_addresss (specific in above cmd with 00:11:22:33:44:10) to NIC using packet generator, record pvp (PG>nic>vswitch>virtio-user>vswitch>nic>PG) performance number can get expected.
-
-6. Quit and re-launch virtio-user with packed ring size not power of 2::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,packed_vq=1,server=1,queue_size=1025 -- -i --rxq=1 --txq=1 --txd=1025 --rxd=1025 --nb-cores=1
-
-7. Re-test step 4-5, record performance of different packet length.
-
-8. Quit and re-launch virtio-user with split ring::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1,mrg_rxbuf=0,in_order=1,server=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-9. Re-test step 4-5, record performance of different packet length.
-
-Test Case 8: PVP vhost async enqueue operation with two VM and 2 dsa kernel channels
----------------------------------------------------------------------------------------
-This case uses vhost example to test split and packed ring when vhost uses the asynchronous enqueue operations
-with dsa kernel driver in PVP topology environment with 2 VM and 2 queues.
-
-1. Bind one physical port to vfio-pci and 1 dsa device to idxd like common step 1 and 3::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-
- ls /dev/dsa #check wq configure, reset if exist
- <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
- ls /dev/dsa #check wq configure success
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --stats 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@wq0.0,txd1@wq0.1] --client
-
-3. launch two virtio-user ports::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=0,packed_vq=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 7-8 -n 4 --no-pci --file-prefix=testpmd1 \
- --vdev=net_virtio_user1,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-4. Start pkts from two virtio-user side individually to let vswitch know the mac addr::
-
- testpmd0>set fwd mac
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>start
- testpmd1>set fwd mac
- testpmd1>start tx_first
- testpmd1>stop
- testpmd1>start
-
-5. Inject IMIX packets (64b...1518b) with dest_mac=virtio_mac_addresss (00:11:22:33:44:10 and 00:11:22:33:44:11) to NIC using packet generator,record performance number can get expected from Packet generator rx side.
-
-6. Stop dpdk-vhost side and relaunch it with same cmd as step2.
-
-7. Start pkts from two virtio-user side individually to let vswitch know the mac addr::
-
- testpmd0>stop
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>start
- testpmd1>stop
- testpmd1>start tx_first
- testpmd1>stop
- testpmd1>start
-
-8. Inject IMIX packets (64b...1518b) with dest_mac=virtio_mac_addresss (00:11:22:33:44:10 and 00:11:22:33:44:11) to NIC using packet generator, ensure get same throughput as step5.
-
-Test Case 9: VM2VM virtio-user forwarding test with 2 dsa kernel channels
----------------------------------------------------------------------------------
-This case uses vhost example to test split and packed ring when vhost uses the asynchronous enqueue operations
-with dsa kernel driver in VM2VM topology environment with 2 queues.
-
-1.Bind one physical port to vfio-pci and 2 dsa device to idxd like common step 1 and 3::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-
- ls /dev/dsa #check wq configure, reset if exist
- <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 2
- ls /dev/dsa #check wq configure success
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:01.0 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@wq0.0,txd1@wq2.1] --client
-
-3. Launch virtio-user::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-pci --file-prefix=testpmd0 \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net0,queues=1,server=1,mrg_rxbuf=1,in_order=0,packed_vq=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 7-8 -n 4 --no-pci --file-prefix=testpmd1 \
- --vdev=net_virtio_user1,mac=00:11:22:33:44:11,path=/tmp/vhost-net1,queues=1,server=1,mrg_rxbuf=1,in_order=1,vectorized=1 -- -i --rxq=1 --txq=1 --txd=1024 --rxd=1024 --nb-cores=1
-
-4. Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected::
-
- testpmd0>set fwd mac
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>set eth-peer 0 00:11:22:33:44:11
- testpmd0>start
- testpmd1>set fwd mac
- testpmd1>set eth-peer 0 00:11:22:33:44:10
- testpmd1>set txpkts 64
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000,2000,2000,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 64,256,2000,64,256,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
-
-5. Stop and quit dpdk-vhost side and relaunch it with same cmd as step2.
-
-6. Rerun step 4.
-
-Test Case 10: VM2VM virtio-pmd test with 2 dsa kernel channels register/unregister stable check
--------------------------------------------------------------------------------------------------
-This case checks vhost can work stably after unregistering and registering the virtio port many times when vhost uses
-the asynchronous enqueue operations with dsa kernel driver in VM2VM topology environment with 2 queues.
-
-1. Bind one physical port to vfio-pci and one dsa device to idxd like common step 1 and 3::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-
- ls /dev/dsa #check wq configure, reset if exist
- <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
- ls /dev/dsa #check wq configure success
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@wq0.0,txd1@wq0.1] --client
-
-3. Start VM1 with qemu::
-
- taskset -c 5,6 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
-
-4. Start VM2 with qemu::
-
- taskset -c 7,8 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-
-5. Bind virtio port to vfio-pci in both two VMs::
-
- modprobe vfio enable_unsafe_noiommu_mode=1
- modprobe vfio-pci
- echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
- ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
-
-6. Start testpmd in VMs seperately::
-
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -- -i --rxq=1 --txq=1 --nb-cores=1 --txd=1024 --rxd=1024
-
-7. Loop packets between two virtio-user sides, record performance number with 64b/2000b/8000b/IMIX pkts can get expected::
-
- testpmd0>set fwd mac
- testpmd0>start tx_first
- testpmd0>stop
- testpmd0>set eth-peer 0 52:54:00:00:00:02
- testpmd0>start
- testpmd1>set fwd mac
- testpmd1>set eth-peer 0 52:54:00:00:00:01
- testpmd1>set txpkts 64
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 2000,2000,2000,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
- testpmd1>stop
- testpmd1>set txpkts 64,256,2000,64,256,2000
- testpmd1>start tx_first
- testpmd1>show port stats all
-
-8. Quit two testpmd in two VMs, bind virtio-pmd port to virtio-pci,then bind port back to vfio-pci, rerun below cmd 50 times::
-
- ./usertools/dpdk-devbind.py -u 00:05.0
- ./usertools/dpdk-devbind.py --bind=virtio-pci 00:05.0
- ./usertools/dpdk-devbind.py --bind=vfio-pci 00:05.0
-
-9. Restart vhost, then rerun step 6-7，check vhost can stable work and get expected throughput.
-
-Test Case 11: VM2VM split ring with 2 enqueue dsa kernel channels test with iperf and reconnect stable check
--------------------------------------------------------------------------------------------------------------
-This case checks vhost can work stably after reconnecting when vhost uses the asynchronous enqueue operations with
-dsa kernel driver in VM2VM topology environment with 2 queues.
-
-1. Bind one physical port to vfio-pci and 2 dsa device to idxd like common step 1 and 3::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-
- ls /dev/dsa #check wq configure, reset if exist
- <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 2
- ls /dev/dsa #check wq configure success
-
-2. On host, launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@wq0.0,txd1@wq0.1] --client
-
-3. Start VM1 with qemu::
-
- taskset -c 5,6 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
-
-4. Start VM2 with qemu::
-
- taskset -c 7,8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge1G1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
-
-5. On VM1, set virtio device IP and run arp protocal::
-
- <VM1># ifconfig ens5 1.1.1.2
- <VM1># arp -s 1.1.1.8 52:54:00:00:00:02
-
-6. On VM2, set virtio device IP and run arp protocal::
-
- <VM2># ifconfig ens5 1.1.1.8
- <VM2># arp -s 1.1.1.2 52:54:00:00:00:01
-
-7. Check the iperf performance between two VMs by below commands::
-
- <VM1># iperf -s -i 1
- <VM2># iperf -c 1.1.1.2 -i 1 -t 60
-
-8. Check iperf throughput can get x Gbits/sec.
-
-9. Scp 1MB file form VM0 to VM1, check packets can be forwarding success by scp::
-
- <VM1># scp <file> root@1.1.1.8:/
-
-10. Relaunch dpdk-vhost, then rerun step 7-9 five times.
-
-11. Relaunch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 2-3 -n 4 -a 0000:4f:00.1 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@wq0.0,txd1@wq2.1] --client
-
-12. Rerun step 7-9 five times.
-
-Test Case 12: VM2VM packed ring with 2 dsa kernel channels stable test with iperf
-----------------------------------------------------------------------------------
-This case checks vhost can work stably when vhost uses the asynchronous enqueue operations with dsa kernel driver in
-VM2VM topology environment with 2 queues.
-
-1. Bind one physical port to vfio-pci and 1 dsa device to idxd like common step 1 and 3::
-
- <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-
- ls /dev/dsa #check wq configure, reset if exist
- <dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
- <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
- <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
- ls /dev/dsa #check wq configure success
-
-2. Launch dpdk-vhost by below command::
-
- <dpdk dir># ./<dpdk build dir>/examples/dpdk-vhost -l 26-28 -n 4 -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=2 \
- -- -p 0x1 --mergeable 1 --vm2vm 1 --socket-file /tmp/vhost-net0 --socket-file /tmp/vhost-net1 \
- --dmas [txd0@wq0.0,txd1@wq0.1]
-
-3. Start VM1 with qemu::
-
- taskset -c 5,6 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
-
-4. Start VM2 with qemu::
-
- taskset -c 7,8 /usr/local/qemu-6.1.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 4 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=/tmp/vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=true,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-
-5. On VM1, set virtio device IP and run arp protocal::
-
- <VM1># ifconfig ens5 1.1.1.2
- <VM1># arp -s 1.1.1.8 52:54:00:00:00:02
-
-6. On VM2, set virtio device IP and run arp protocal::
-
- <VM2># ifconfig ens5 1.1.1.8
- <VM2># arp -s 1.1.1.2 52:54:00:00:00:01
-
-7. Check the iperf performance between two VMs by below commands::
-
- <VM1># iperf -s -i 1
- <VM2># iperf -c 1.1.1.2 -i 1 -t 60
-
-8. Check iperf throughput can get x Gbits/sec.
-
-9. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
-
- <VM1># scp <file> root@1.1.1.8:/
-
-10. Rerun step 7-9 five times.
\ No newline at end of file
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dts][PATCH V1] test_plans/vswitch_sample_dsa: delete testplan
2022-12-28 8:50 [dts][PATCH V1] test_plans/vswitch_sample_dsa: delete testplan Wei Ling
@ 2023-01-04 1:39 ` lijuan.tu
0 siblings, 0 replies; 2+ messages in thread
From: lijuan.tu @ 2023-01-04 1:39 UTC (permalink / raw)
To: dts, Wei Ling; +Cc: Wei Ling
On Wed, 28 Dec 2022 16:50:08 +0800, Wei Ling <weix.ling@intel.com> wrote:
> As the SPR platform plugined NIC are all E810 series, and the E810
> series NIC unsupport VMDQ, so used the testpmd to test the vhsot
> aync data-path.
>
> Signed-off-by: Wei Ling <weix.ling@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-01-04 1:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-28 8:50 [dts][PATCH V1] test_plans/vswitch_sample_dsa: delete testplan Wei Ling
2023-01-04 1:39 ` lijuan.tu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).