[dts] [PATCH V1] tests/cvl_fdir: add mark id

[dts] [PATCH V1] tests/cvl_fdir: add mark id

[Jiale Song]

after the packet comes in, it hits the switch rule first and then the fdir rule. the final action
is the superposition of the two. the priority of switch is higher than fdir, so it goes to the 
switch queue, but it still contains the fdir mark action

Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
 test_plans/cvl_fdir_test_plan.rst | 4 ++--
 tests/TestSuite_cvl_fdir.py       | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
index 4c4526d8..ed1214f9 100644
--- a/test_plans/cvl_fdir_test_plan.rst
+++ b/test_plans/cvl_fdir_test_plan.rst
@@ -3589,7 +3589,7 @@ set "--log-level=ice,7", then check::
     sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21") /UDP(sport=22, dport=23)/ Raw('x' * 80)],iface="enp175s0f0", count=10)
 
    the two packets are both redirected to queue 1 with mark ID 1.
-   then create MAC_IPV4_UDP flow, it is set to switch filter::
+   then create MAC_IPV4_UDP flow, it is set to switch filter with mark ID 1::
 
     flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 2 / end
 
@@ -3610,7 +3610,7 @@ set "--log-level=ice,7", then check::
 
     flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / end actions queue index 1 / end
 
-   send same packet, it is redirected to queue 1, because the packet match switch filter first.
+   send same packet, it is redirected to queue 1 with mark ID 1, because the packet match switch filter first.
 
 
 Test case: count/query
diff --git a/tests/TestSuite_cvl_fdir.py b/tests/TestSuite_cvl_fdir.py
index d4cb90ce..529be0e8 100644
--- a/tests/TestSuite_cvl_fdir.py
+++ b/tests/TestSuite_cvl_fdir.py
@@ -3007,7 +3007,7 @@ class TestCVLFdir(TestCase):
         out = self.send_pkts_getouput(pkts=pkts[0])
         rfc.check_mark(out, pkt_num=1, check_param={"port_id": 0, "queue": 1,"mark_id":1}, stats=True)
         out = self.send_pkts_getouput(pkts=pkts[1])
-        rfc.check_mark(out, pkt_num=1, check_param={"port_id": 0, "queue": 2}, stats=True)
+        rfc.check_mark(out, pkt_num=1, check_param={"port_id": 0, "queue": 2,"mark_id":1}, stats=True)
 
         rule3 = "flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 2 / mark id 1 / end"
         rule4 = "flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / end actions queue index 1 / end"
-- 
2.17.1

RE: [dts] [PATCH V1] tests/cvl_fdir: add mark id

[Tu, Lijuan]

> -----Original Message-----
> From: Jiale Song <songx.jiale@intel.com>
> Sent: 2021年11月12日 16:03
> To: dts@dpdk.org
> Cc: Jiale, SongX <songx.jiale@intel.com>
> Subject: [dts] [PATCH V1] tests/cvl_fdir: add mark id
> 
> after the packet comes in, it hits the switch rule first and then the fdir rule. the
> final action is the superposition of the two. the priority of switch is higher than
> fdir, so it goes to the switch queue, but it still contains the fdir mark action
> 
> Signed-off-by: Jiale Song <songx.jiale@intel.com>

Applied, thanks