test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V1]test_plan: add performance_thread test plan
@ 2019-09-04 17:06 hanyingya
  2019-09-18  5:37 ` Peng, Yuan
  2019-09-20  6:41 ` Tu, Lijuan
  0 siblings, 2 replies; 3+ messages in thread
From: hanyingya @ 2019-09-04 17:06 UTC (permalink / raw)
  To: dts, yuan.peng; +Cc: hanyingya

Signed-off-by: hanyingya <yingyax.han@intel.com>
---
 test_plans/performance_thread_test_plan.rst | 227 ++++++++++++++++++++
 1 file changed, 227 insertions(+)
 create mode 100644 test_plans/performance_thread_test_plan.rst

diff --git a/test_plans/performance_thread_test_plan.rst b/test_plans/performance_thread_test_plan.rst
new file mode 100644
index 0000000..66de604
--- /dev/null
+++ b/test_plans/performance_thread_test_plan.rst
@@ -0,0 +1,227 @@
+.. Copyright (c) <2011-2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+======================================
+Performance-thread  performance Tests
+======================================
+
+The Performance-Thread results are produced using ``l3fwd-thread`` application.
+
+For more information about Performance Thread sameple applicaton please refer to 
+link: http://doc.dpdk.org/guides/sample_app_ug/performance_thread.html
+
+Prerequisites
+==============
+
+1. Hardware requirements:
+
+    - For each CPU socket, each memory channel should be populated with at least 1x DIMM
+    - Board is populated with 4x 1GbE or 10GbE ports. Special PCIe restrictions may
+      be required for performance. For example, the following requirements should be
+      met for Intel 82599 (Niantic) NICs:
+
+        - NICs are plugged into PCIe Gen2 or Gen3 slots
+        - For PCIe Gen2 slots, the number of lanes should be 8x or higher
+        - A single port from each NIC should be used, so for 4x ports, 4x NICs should
+          be used
+
+    - NIC ports connected to traffic generator. It is assumed that the NIC ports
+      P0, P1 (as identified by the DPDK application) are connected to the
+      traffic generator ports TG0, TG1. The application-side port mask of
+      NIC ports P0, P1 is noted as PORTMASK in this section.
+
+2. BIOS requirements:
+
+    - Intel Hyper-Threading Technology is ENABLED
+    - Hardware Prefetcher is DISABLED
+    - Adjacent Cache Line Prefetch is DISABLED
+    - Direct Cache Access is DISABLED
+
+3. Linux kernel requirements:
+
+    - Linux kernel has the following features enabled: huge page support, UIO, HPET
+    - Appropriate number of huge pages are reserved at kernel boot time
+    - The IDs of the hardware threads (logical cores) per each CPU socket can be
+      determined by parsing the file /proc/cpuinfo. The naming convention for the
+      logical cores is: C{x.y.z} = hyper-thread z of physical core y of CPU socket x,
+      with typical values of x = 0 .. 3, y = 0 .. 7, z = 0 .. 1. Logical cores
+      C{0.0.1} and C{0.0.1} should be avoided while executing the test, as they are
+      used by the Linux kernel for running regular processes.
+
+4. The application options to be used in below test cases are listed as well as the 
+general description.::
+
+    ./build/l3fwd-thread [EAL options] -- \
+        -p PORTMASK [-P]
+        --rx(port,queue,lcore,thread)[,(port,queue,lcore,thread)]
+        --tx(lcore,thread)[,(lcore,thread)]
+        [--enable-jumbo] [--max-pkt-len PKTLEN]]
+        [--no-lthreads]
+
+   For other options please refer to URL memtioned above for detail explanation.
+
+5. Traffic generator requirements
+
+The flows need to be configured and started by the traffic generator:
+
+  +------+---------+------------+---------------+------------+---------+
+  | Flow | Traffic | MAC        | MAC           | IPV4       | IPV4    |
+  |      | Gen.    | Src.       | Dst.          | Src.       | Dest.   |
+  |      | Port    | Address    | Address       | Address    | Address |
+  +======+=========+============+===============+============+=========+
+  |   1  |   TG0   | Random MAC | DUT Port0 Mac | Random IP  | 2.1.1.1 |
+  +------+---------+------------+---------------+------------+---------+
+  |   2  |   TG1   | Random Mac | DUT port1 Mac | Random IP  | 1.1.1.1 |
+  +------+---------+------------+---------------+------------+---------+
+
+6. Test results table.
+
+Frame sizes should be configured from 64,128,256,512,1024,2000, etc
+
+  +------------+---------+------------------+--------------+
+  | Frame Size |  S/C/T  | Throughput(Mpps) | Line Rate(%) |
+  +============+=========+==================+==============+
+  | 64         |         |                  |              |
+  +------------+---------+------------------+--------------+
+  | 128        |         |                  |              |
+  +------------+---------+------------------+--------------+
+  | 256        |         |                  |              |
+  +------------+---------+------------------+--------------+
+  | 512        |         |                  |              |
+  +------------+---------+------------------+--------------+
+  | 1024       |         |                  |              |
+  +------------+---------+------------------+--------------+
+  | 2000       |         |                  |              |
+  +------------+---------+------------------+--------------+
+
+
+Test Case: one_lcore_per_pcore performance
+==========================================
+
+1. Launch app with descriptor parameters::
+
+    ./examples/performance-thread/l3fwd-thread/x86_64-native-linuxapp-gcc/l3fwd-thread \
+     -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500  \
+     --rx="(0,0,0,0)(1,0,0,0)" --tx="(1,0)" --no-lthread
+
+   (Note: option "--stat-lcore" is not enabled in the automation scripts)
+
+2. Send traffic and verify performance.
+
+3. Repeat above tests with below command lines respectively
+
+  +-----+---------------------------------------------------------------------------------------------------+
+  | #   |                             Command Line                                                          |
+  +=====+===================================================================================================+
+  | 1   | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500 \                          |
+  |     |                 --rx="(0,0,0,0)(1,0,1,1) --tx="(2,0)(3,1) \                                       |
+  |     |                 --no-lthread                                                                      |
+  +-----+---------------------------------------------------------------------------------------------------+
+  | 2   | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500 \                          |
+  |     |                 --rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)" \                                     |
+  |     |                 --tx="(4,0)(5,1)(6,2)(7,3)" --no-lthread                                          |
+  +-----+---------------------------------------------------------------------------------------------------+
+  | 3   | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500 \                          |
+  |     |                --rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \  |
+  |     |                --tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)" \                            |
+  |     |                --no-lthread                                                                       |
+  +-----+---------------------------------------------------------------------------------------------------+
+
+4. Check test results and full out the above result table.
+
+
+Test Case: n_lcore_per_pcore performance
+========================================
+
+1. Launch app with descriptor parameters::
+
+    ./examples/performance-thread/l3fwd-thread/x86_64-native-linuxapp-gcc/l3fwd-thread \
+     --lcores="2,(0-1)@0" -- -P -p 3 --enable-jumbo --max-pkt-len 2500 \
+     --rx="(0,0,0,0)(1,0,0,0)" --tx="(1,0)"
+
+   (Note: option "--stat-lcore" is not enabled in the automation scripts)
+
+2. Send traffic and verify performance both directional and bi-directional
+
+3. Repeat above tests with below command lines respectively
+
+  +-----+---------------------------------------------------------------------------------------------------+
+  | #   |                             Command Line                                                          |
+  +=====+===================================================================================================+
+  | 1   | ./l3fwd-thread -n 4 --lcores="(0-3)@0,4" -- -P -p 3 --enable-jumbo --max-pkt-len 2500  \          |
+  |     |                 --rx="(0,0,0,0)(1,0,1,1) --tx="(2,0)(3,1) \                                       |
+  |     |                 --no-lthread                                                                      |
+  +-----+---------------------------------------------------------------------------------------------------+
+  | 2   | ./l3fwd-thread -n 4 --lcores="(0-7)@0,8" -- -P -p 3-P -p 3 --enable-jumbo --max-pkt-len 2500  \   |
+  |     |                 --rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)" \                                     |
+  |     |                 --tx="(4,0)(5,1)(6,2)(7,3)" --no-lthread                                          |
+  +-----+---------------------------------------------------------------------------------------------------+
+  | 3   | ./l3fwd-thread -n 4 --lcores="(0-15)@0,16" -- -P -p 3 --enable-jumbo --max-pkt-len 2500  \        |
+  |     |                --rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \  |
+  |     |                --tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)" \                            |
+  |     |                --no-lthread                                                                       |
+  +-----+---------------------------------------------------------------------------------------------------+
+
+4. Check test results and full out the above result table.
+
+
+Test Case: n_lthread_per_pcore performance
+==========================================
+
+1. Launch app with descriptor parameters::
+
+    ./examples/performance-thread/l3fwd-thread/x86_64-native-linuxapp-gcc/l3fwd-thread \
+     -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500 \
+     ----tx="(0,0)" --tx="(0,0)"
+
+   (Note: option "--stat-lcore" is not enabled in the automation scripts)
+
+2. Send traffic and verify performance both directional and bi-directional
+
+3. Repeat above tests with below command lines respectively
+
+  +-----+---------------------------------------------------------------------------------------------------+
+  | #   |                             Command Line                                                          |
+  +=====+===================================================================================================+
+  | 1   | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500  \                         |
+  |     |                 --rx="(0,0,0,0)(1,0,1,1) --tx="(0,0),(0,1)"                                       |
+  +-----+---------------------------------------------------------------------------------------------------+
+  | 2   | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500  \                         |
+  |     |                 --rx="(0,0,0,0)(0,1,0,1)(1,0,0,2)(1,1,0,3)" \                                     |
+  |     |                 --tx="(0,0)(0,1)(0,2)(0,3)"                                                       |
+  +-----+---------------------------------------------------------------------------------------------------+
+  | 3   | ./l3fwd-thread -c ff -n 4 -- -P -p 3 --enable-jumbo --max-pkt-len 2500  \                         |
+  |     |                --rx="(0,0,0,0)(0,1,0,1)(0,2,0,2)(0,3,0,3)(1,0,0,4)(1,1,0,5)(1,2,0,6)(1,3,0,7)" \  |
+  |     |                --tx="(0,0)(0,1)(0,2)(0,3)(0,4)(0,5)(0,6)(0,7)" \                                  |
+  +-----+---------------------------------------------------------------------------------------------------+
+
+4. Check test results and full out the above result table.
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-09-20  6:41 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-04 17:06 [dts] [PATCH V1]test_plan: add performance_thread test plan hanyingya
2019-09-18  5:37 ` Peng, Yuan
2019-09-20  6:41 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).