* [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and cores were from different sockets
@ 2018-06-12 6:28 lu,peipei
2018-06-12 8:25 ` Liu, Yong
0 siblings, 1 reply; 5+ messages in thread
From: lu,peipei @ 2018-06-12 6:28 UTC (permalink / raw)
To: dts; +Cc: lu,peipei
the cases need ports and cores from the same socket.
Signed-off-by: lu,peipei <peipeix.lu@intel.com>
---
tests/TestSuite_unit_tests_pmd_perf.py | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/tests/TestSuite_unit_tests_pmd_perf.py b/tests/TestSuite_unit_tests_pmd_perf.py
index 7fc200e..ab67b5d 100644
--- a/tests/TestSuite_unit_tests_pmd_perf.py
+++ b/tests/TestSuite_unit_tests_pmd_perf.py
@@ -85,12 +85,27 @@ class TestUnitTestsPmdPerf(TestCase):
"""
pass
+ def get_core_from_socket(self):
+ """
+ select the port and lcores from same socket.
+ """
+
+ out = self.dut.send_expect("./usertools/cpu_layout.py","#", 10)
+ k = re.search("Core 0 (.*)", out)
+ result = re.findall("(\d+),", k.group())
+ socket_id = self.dut.ports_info[0]['port'].socket
+ if socket_id == 0 or socket_id == -1:
+ return int(result[0])
+ else:
+ return int(result[1])
+
def test_pmd_burst(self):
"""
Run pmd stream control mode burst test case.
"""
- self.dut.send_expect("./test/test/test -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.core = self.get_core_from_socket()
+ self.dut.send_expect("./test/test/test -n 1 --lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
for mode in self.burst_ctlmodes:
self.dut.send_expect("set_rxtx_sc %s" % mode, "RTE>>", 10)
out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120)
@@ -105,7 +120,8 @@ class TestUnitTestsPmdPerf(TestCase):
"""
Run pmd stream control mode continues test case.
"""
-
+
+ self.core = self.get_core_from_socket()
self.table_header = ['Mode']
self.table_header += self.anchors
self.result_table_create(self.table_header)
@@ -113,9 +129,9 @@ class TestUnitTestsPmdPerf(TestCase):
for mode in self.rxtx_modes:
if mode is "scalar":
- self.dut.send_expect("./test/test/test_scalar -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.dut.send_expect("./test/test/test_scalar -n 1 --lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
else:
- self.dut.send_expect("./test/test/test -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.dut.send_expect("./test/test/test -n 1 --lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
table_row = [mode]
self.dut.send_expect("set_rxtx_sc continuous", "RTE>>", 10)
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and cores were from different sockets
2018-06-12 6:28 [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and cores were from different sockets lu,peipei
@ 2018-06-12 8:25 ` Liu, Yong
0 siblings, 0 replies; 5+ messages in thread
From: Liu, Yong @ 2018-06-12 8:25 UTC (permalink / raw)
To: Lu, PeipeiX, dts; +Cc: Lu, PeipeiX
Peipei,
More comments are inline.
Thanks,
Marvin
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lu,peipei
> Sent: Tuesday, June 12, 2018 2:29 PM
> To: dts@dpdk.org
> Cc: Lu, PeipeiX <peipeix.lu@intel.com>
> Subject: [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and
> cores were from different sockets
>
> the cases need ports and cores from the same socket.
>
> Signed-off-by: lu,peipei <peipeix.lu@intel.com>
> ---
> tests/TestSuite_unit_tests_pmd_perf.py | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/tests/TestSuite_unit_tests_pmd_perf.py
> b/tests/TestSuite_unit_tests_pmd_perf.py
> index 7fc200e..ab67b5d 100644
> --- a/tests/TestSuite_unit_tests_pmd_perf.py
> +++ b/tests/TestSuite_unit_tests_pmd_perf.py
> @@ -85,12 +85,27 @@ class TestUnitTestsPmdPerf(TestCase):
> """
> pass
>
> + def get_core_from_socket(self):
> + """
> + select the port and lcores from same socket.
> + """
> +
> + out = self.dut.send_expect("./usertools/cpu_layout.py","#", 10)
Please add space after comma symbol.
> + k = re.search("Core 0 (.*)", out)
> + result = re.findall("(\d+),", k.group())
> + socket_id = self.dut.ports_info[0]['port'].socket
> + if socket_id == 0 or socket_id == -1:
> + return int(result[0])
> + else:
> + return int(result[1])
> +
> def test_pmd_burst(self):
> """
> Run pmd stream control mode burst test case.
> """
>
> - self.dut.send_expect("./test/test/test -n 1 -c f",
> "R.*T.*E.*>.*>", 60)
> + self.core = self.get_core_from_socket()
> + self.dut.send_expect("./test/test/test -n 1 --lcores='%d-
> %d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
Please add space after percent sign.
> for mode in self.burst_ctlmodes:
> self.dut.send_expect("set_rxtx_sc %s" % mode, "RTE>>", 10)
> out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120)
> @@ -105,7 +120,8 @@ class TestUnitTestsPmdPerf(TestCase):
> """
> Run pmd stream control mode continues test case.
> """
> -
> +
> + self.core = self.get_core_from_socket()
> self.table_header = ['Mode']
> self.table_header += self.anchors
> self.result_table_create(self.table_header)
> @@ -113,9 +129,9 @@ class TestUnitTestsPmdPerf(TestCase):
>
> for mode in self.rxtx_modes:
> if mode is "scalar":
> - self.dut.send_expect("./test/test/test_scalar -n 1 -c f",
> "R.*T.*E.*>.*>", 60)
> + self.dut.send_expect("./test/test/test_scalar -n 1 --
> lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
Please reduce the number of core, if possible please just use 2 cores.
> else:
> - self.dut.send_expect("./test/test/test -n 1 -c f",
> "R.*T.*E.*>.*>", 60)
> + self.dut.send_expect("./test/test/test -n 1 --lcores='%d-
> %d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
>
> table_row = [mode]
> self.dut.send_expect("set_rxtx_sc continuous", "RTE>>", 10)
> --
> 1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and cores were from different sockets
2018-06-12 8:52 lu,peipei
@ 2018-06-12 16:50 ` Liu, Yong
0 siblings, 0 replies; 5+ messages in thread
From: Liu, Yong @ 2018-06-12 16:50 UTC (permalink / raw)
To: lu,peipei, dts
Thanks, peipei. Applied.
On 06/12/2018 04:52 PM, lu,peipei wrote:
> the cases need ports and cores from the same socket.
>
> Signed-off-by: lu,peipei<peipeix.lu@intel.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and cores were from different sockets
@ 2018-06-12 8:52 lu,peipei
2018-06-12 16:50 ` Liu, Yong
0 siblings, 1 reply; 5+ messages in thread
From: lu,peipei @ 2018-06-12 8:52 UTC (permalink / raw)
To: dts; +Cc: lu,peipei
the cases need ports and cores from the same socket.
Signed-off-by: lu,peipei <peipeix.lu@intel.com>
---
tests/TestSuite_unit_tests_pmd_perf.py | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/tests/TestSuite_unit_tests_pmd_perf.py b/tests/TestSuite_unit_tests_pmd_perf.py
index 7fc200e..ab67b5d 100644
--- a/tests/TestSuite_unit_tests_pmd_perf.py
+++ b/tests/TestSuite_unit_tests_pmd_perf.py
@@ -85,12 +85,27 @@ class TestUnitTestsPmdPerf(TestCase):
"""
pass
+ def get_core_from_socket(self):
+ """
+ select the port and lcores from same socket.
+ """
+
+ out = self.dut.send_expect("./usertools/cpu_layout.py", "#", 10)
+ k = re.search("Core 0 (.*)", out)
+ result = re.findall("(\d+),", k.group())
+ socket_id = self.dut.ports_info[0]['port'].socket
+ if socket_id == 0 or socket_id == -1:
+ return int(result[0])
+ else:
+ return int(result[1])
+
def test_pmd_burst(self):
"""
Run pmd stream control mode burst test case.
"""
- self.dut.send_expect("./test/test/test -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.core = self.get_core_from_socket()
+ self.dut.send_expect("./test/test/test -n 1 --lcores='%d-%d'" % (self.core, self.core + 1), "R.*T.*E.*>.*>", 60)
for mode in self.burst_ctlmodes:
self.dut.send_expect("set_rxtx_sc %s" % mode, "RTE>>", 10)
out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120)
@@ -105,7 +120,8 @@ class TestUnitTestsPmdPerf(TestCase):
"""
Run pmd stream control mode continues test case.
"""
-
+
+ self.core = self.get_core_from_socket()
self.table_header = ['Mode']
self.table_header += self.anchors
self.result_table_create(self.table_header)
@@ -113,9 +129,9 @@ class TestUnitTestsPmdPerf(TestCase):
for mode in self.rxtx_modes:
if mode is "scalar":
- self.dut.send_expect("./test/test/test_scalar -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.dut.send_expect("./test/test/test_scalar -n 1 --lcores='%d-%d'" % (self.core, self.core + 1), "R.*T.*E.*>.*>", 60)
else:
- self.dut.send_expect("./test/test/test -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.dut.send_expect("./test/test/test -n 1 --lcores='%d-%d'" % (self.core, self.core + 1), "R.*T.*E.*>.*>", 60)
table_row = [mode]
self.dut.send_expect("set_rxtx_sc continuous", "RTE>>", 10)
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dts] [PATCH V2] tests/unit_tests_pmd_perf:fix the ports and cores were from different sockets
@ 2018-06-12 5:53 lu,peipei
0 siblings, 0 replies; 5+ messages in thread
From: lu,peipei @ 2018-06-12 5:53 UTC (permalink / raw)
To: dts; +Cc: lu,peipei
the cases need ports and cores from the same socket.
Signed-off-by: lu,peipei <peipeix.lu@intel.com>
---
tests/TestSuite_unit_tests_pmd_perf.py | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/tests/TestSuite_unit_tests_pmd_perf.py b/tests/TestSuite_unit_tests_pmd_perf.py
index 7fc200e..9c3d62d 100644
--- a/tests/TestSuite_unit_tests_pmd_perf.py
+++ b/tests/TestSuite_unit_tests_pmd_perf.py
@@ -85,12 +85,28 @@ class TestUnitTestsPmdPerf(TestCase):
"""
pass
+ def get_core_from_socket(self):
+ """
+ select the port and lcores from same socket.
+ """
+ out = self.dut.send_expect("./usertools/cpu_layout.py","#", 10)
+ k = re.search("Core 0 (.*)", out)
+ result = re.findall("(\d+),", k.group())
+ socket_id = self.dut.ports_info[0]['port'].socket
+ if socket_id == 0:
+ return int(result[0])
+ elif socket_id == 1:
+ return int(result[1])
+ else:
+ print "socket error"
+
def test_pmd_burst(self):
"""
Run pmd stream control mode burst test case.
"""
-
- self.dut.send_expect("./test/test/test -n 1 -c f", "R.*T.*E.*>.*>", 60)
+
+ self.core = self.get_core_from_socket()
+ self.dut.send_expect("./test/test/test -n 1 --lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
for mode in self.burst_ctlmodes:
self.dut.send_expect("set_rxtx_sc %s" % mode, "RTE>>", 10)
out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120)
@@ -106,16 +122,17 @@ class TestUnitTestsPmdPerf(TestCase):
Run pmd stream control mode continues test case.
"""
- self.table_header = ['Mode']
+ self.core = self.get_core_from_socket()
+ self.table_header = ['Mode']
self.table_header += self.anchors
self.result_table_create(self.table_header)
print self.table_header
for mode in self.rxtx_modes:
if mode is "scalar":
- self.dut.send_expect("./test/test/test_scalar -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.dut.send_expect("./test/test/test_scalar -n 1 --lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
else:
- self.dut.send_expect("./test/test/test -n 1 -c f", "R.*T.*E.*>.*>", 60)
+ self.dut.send_expect("./test/test/test -n 1 --lcores='%d-%d'" %(self.core, self.core + 6), "R.*T.*E.*>.*>", 60)
table_row = [mode]
self.dut.send_expect("set_rxtx_sc continuous", "RTE>>", 10)
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-06-12 9:03 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-12 6:28 [dts] [PATCH V2] tests/unit_tests_pmd_perf: fix the ports and cores were from different sockets lu,peipei
2018-06-12 8:25 ` Liu, Yong
-- strict thread matches above, loose matches on Subject: below --
2018-06-12 8:52 lu,peipei
2018-06-12 16:50 ` Liu, Yong
2018-06-12 5:53 [dts] [PATCH V2] tests/unit_tests_pmd_perf:fix " lu,peipei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).