Hi Phil,
Just both debugfs and hard-coded code will call the same function i40e_aq_stop_lldp at the end.
So I think if firmware version is 6.x, still can’t disable LLDP by debugfs.
And In my mind, we do not have user manual for NIC configuration. Most of time, we get the such information from code
J
Thanks,
Marvin
Hi Marvin,
Thanks for your guidance.
I got some tips from serverfault.com, so do you have some manual for Intel NIC runtime configuration?
Thanks,
Phil Yang
From: Liu, Yong <yong.liu@intel.com>
Sent: Friday, June 15, 2018 5:04 PM
To: Phil Yang <Phil.Yang@arm.com>
Cc: dts@dpdk.org; nd <nd@arm.com>
Subject: RE: [dts] How to disable the BOOTP and LLDP packets on tester ?
Phil,
BOOTP is the packets sent by dhcp client. You can check whether Network-manager or dhcp client running in the background.
For LLDP packet, FVL with firmware6.0 can’t disable it. If FVL with firmware 5.X or lower version, you can disable it in i40e driver.
i40e_main.c
//pf->hw_features |= I40E_HW_STOP_FW_LLDP;
Thanks,
Marvin
From: Phil.Yang@arm.com [mailto:Phil.Yang@arm.com]
Sent: Wednesday, June 13, 2018 6:13 PM
To: Liu, Yong <yong.liu@intel.com>
Cc: dts@dpdk.org; nd <nd@arm.com>
Subject: [dts] How to disable the BOOTP and LLDP packets on tester ?
Hi Marvin,
I captured groups of bootp and LLDP packets while running DTS on DUT PMD.
My environment:
Application: l2fwd
DUT NIC: 82599ES
Tester NIC: X710
Link:
Tester <------> DUT
X710 port A <-------> 82599ES port A
X710 port B <-------> 82599ES port B
Please check the attachment. Thanks.
How to disable the BOOTP and LLDP packets on tester ?
Ps: I didn’t find lldpd service running on my tester.
Best Regards,
Phil Yang