26/11/2019 17:05:00 dts: TEST SUITE : TestInterruptPmd 26/11/2019 17:05:00 dts: NIC : fortville_spirit 26/11/2019 17:05:00 dut.10.238.54.218: 26/11/2019 17:05:00 tester: 26/11/2019 17:05:00 dut.10.238.54.218: rm -rf ./app/test/test_resource_c.res.o 26/11/2019 17:05:00 dut.10.238.54.218: 26/11/2019 17:05:00 dut.10.238.54.218: rm -rf ./app/test/test_resource_tar.res.o 26/11/2019 17:05:01 dut.10.238.54.218: 26/11/2019 17:05:01 dut.10.238.54.218: rm -rf ./app/test/test_pci_sysfs.res.o 26/11/2019 17:05:01 dut.10.238.54.218: 26/11/2019 17:05:01 dut.10.238.54.218: make -j 70 -C ./examples/l3fwd-power 26/11/2019 17:05:03 dut.10.238.54.218: make: Entering directory '/root/dpdk/examples/l3fwd-power' CC perf_core.o CC main.o LD l3fwd-power INSTALL-APP l3fwd-power INSTALL-MAP l3fwd-power.map make: Leaving directory '/root/dpdk/examples/l3fwd-power' 26/11/2019 17:05:03 TestInterruptPmd: Test Case test_different_queue Begin 26/11/2019 17:05:03 dut.10.238.54.218: 26/11/2019 17:05:03 tester: 26/11/2019 17:05:03 dut.10.238.54.218: ./examples/l3fwd-power/build/l3fwd-power -c 0x1e -n 4 -- -p 0x3 -P --config='(0,0,1),(1,0,2)' 26/11/2019 17:05:04 dut.10.238.54.218: EAL: Detected 72 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'VA' EAL: Probing VFIO support... EAL: VFIO support initialized EAL: PCI device 0000:00:04.0 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.1 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.2 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.3 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.4 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.5 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.6 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.7 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:18:00.0 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: using IOMMU type 1 (Type 1) EAL: PCI device 0000:18:00.1 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: PCI device 0000:3d:00.0 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:3d:00.1 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:80:04.0 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.1 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.2 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.3 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.4 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.5 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.6 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.7 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:86:00.0 on NUMA socket 1 EAL: probe driver: 8086:1528 net_ixgbe EAL: PCI device 0000:86:00.1 on NUMA socket 1 EAL: probe driver: 8086:1528 net_ixgbe Promiscuous mode selected POWER: Env isn't set yet! POWER: Attempting to initialise ACPI cpufreq power management... POWER: Initialized successfully for lcore 1 power management POWER: Initialized successfully for lcore 2 power management POWER: Initialized successfully for lcore 3 power management POWER: Initialized successfully for lcore 4 power management Initializing port 0 ... Creating queues: nb_rxq=1 nb_txq=4... Port 0 modified RSS hash function based on hardware support,requested:0x20820 configured:0x820 Address:68:05:CA:0D:BC:00, Allocated mbuf pool on socket 0 LPM: Adding route 0x01010100 / 24 (0) LPM: Adding route 0x02010100 / 24 (1) LPM: Adding route 0x03010100 / 24 (2) LPM: Adding route 0x04010100 / 24 (3) LPM: Adding route 0x05010100 / 24 (4) LPM: Adding route 0x06010100 / 24 (5) LPM: Adding route 0x07010100 / 24 (6) LPM: Adding route 0x08010100 / 24 (7) txq=1,0,0 txq=2,1,0 txq=3,2,0 txq=4,3,0 Initializing port 1 ... Creating queues: nb_rxq=1 nb_txq=4... Port 1 modified RSS hash function based on hardware support,requested:0x20820 configured:0x820 Address:68:05:CA:0D:BC:01, txq=1,0,0 txq=2,1,0 txq=3,2,0 txq=4,3,0 Initializing rx queues on lcore 1 ... rxq=0,0,0 Initializing rx queues on lcore 2 ... rxq=1,0,0 Initializing rx queues on lcore 3 ... Initializing rx queues on lcore 4 ... Checking link statusdone Port 0 Link Up - speed 40000 Mbps - full-duplex Port 1 Link Up - speed 40000 Mbps - full-duplex 26/11/2019 17:05:04 tester: scapy 26/11/2019 17:05:05 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). WARNING: No route found for IPv6 destination :: (no default route?) INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.3  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/scapy  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like it is your last  scccccp///pSP///p p//Y | day on earth.  sY/////////y caa S//P | -- Lao-Tze  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    26/11/2019 17:05:05 tester: sendp([Ether()/IP(dst="198.0.0.0")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:05 tester: . Sent 1 packets. 26/11/2019 17:05:05 tester: sendp([Ether()/IP(dst="198.0.0.1")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:05 tester: . Sent 1 packets. 26/11/2019 17:05:05 tester: sendp([Ether()/IP(dst="198.0.0.0")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:05 tester: . Sent 1 packets. 26/11/2019 17:05:05 tester: sendp([Ether()/IP(dst="198.0.0.1")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:06 tester: . Sent 1 packets. 26/11/2019 17:05:06 tester: quit() 26/11/2019 17:05:06 tester: 26/11/2019 17:05:11 dut.10.238.54.218: : entering main loop on lcore 2 L3FWD_POWER: -- lcoreid=2 portid=1 rxqueueid=0 L3FWD_POWER: lcore 3 has nothing to do L3FWD_POWER: lcore 4 has nothing to do L3FWD_POWER: entering main loop on lcore 1 L3FWD_POWER: -- lcoreid=1 portid=0 rxqueueid=0 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 2 sleeps until interrupt triggers 26/11/2019 17:05:11 dut.10.238.54.218: kill_all: called by dut and has no prefix list. 26/11/2019 17:05:13 dut.10.238.54.218: Killed [PEXPECT]# 26/11/2019 17:05:14 dut.10.238.54.218: ./examples/l3fwd-power/build/l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config='(0,0,0),(0,1,1),(0,2,2),(0,3,3),(0,4,4)' 26/11/2019 17:05:15 dut.10.238.54.218: EAL: Detected 72 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'VA' EAL: Probing VFIO support... EAL: VFIO support initialized EAL: PCI device 0000:00:04.0 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.1 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.2 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.3 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.4 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.5 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.6 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.7 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:18:00.0 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: using IOMMU type 1 (Type 1) EAL: PCI device 0000:18:00.1 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: PCI device 0000:3d:00.0 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:3d:00.1 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:80:04.0 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.1 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.2 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.3 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.4 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.5 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.6 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.7 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:86:00.0 on NUMA socket 1 EAL: probe driver: 8086:1528 net_ixgbe EAL: PCI device 0000:86:00.1 on NUMA socket 1 EAL: probe driver: 8086:1528 net_ixgbe Promiscuous mode selected POWER: Env isn't set yet! POWER: Attempting to initialise ACPI cpufreq power management... POWER: Initialized successfully for lcore 0 power management POWER: Initialized successfully for lcore 1 power management POWER: Initialized successfully for lcore 2 power management POWER: Initialized successfully for lcore 3 power management POWER: Initialized successfully for lcore 4 power management POWER: Initialized successfully for lcore 5 power management Initializing port 0 ... Creating queues: nb_rxq=5 nb_txq=6... Port 0 modified RSS hash function based on hardware support,requested:0x20820 configured:0x820 Address:68:05:CA:0D:BC:00, Allocated mbuf pool on socket 0 LPM: Adding route 0x01010100 / 24 (0) LPM: Adding route 0x02010100 / 24 (1) LPM: Adding route 0x03010100 / 24 (2) LPM: Adding route 0x04010100 / 24 (3) LPM: Adding route 0x05010100 / 24 (4) LPM: Adding route 0x06010100 / 24 (5) LPM: Adding route 0x07010100 / 24 (6) LPM: Adding route 0x08010100 / 24 (7) txq=0,0,0 txq=1,1,0 txq=2,2,0 txq=3,3,0 txq=4,4,0 txq=5,5,0 Initializing port 1 ... Creating queues: nb_rxq=0 nb_txq=6... Port 1 modified RSS hash function based on hardware support,requested:0x20820 configured:0x820 Address:68:05:CA:0D:BC:01, txq=0,0,0 txq=1,1,0 txq=2,2,0 txq=3,3,0 txq=4,4,0 txq=5,5,0 Initializing rx queues on lcore 0 ... rxq=0,0,0 Initializing rx queues on lcore 1 ... rxq=0,1,0 Initializing rx queues on lcore 2 ... rxq=0,2,0 Initializing rx queues on lcore 3 ... rxq=0,3,0 Initializing rx queues on lcore 4 ... rxq=0,4,0 Initializing rx queues on lcore 5 ... i40e_pf_config_rss(): No PF queues are configured to enable RSS Checking link statusdone Port 0 Link Up - speed 40000 Mbps - full-duplex Port 1 Link Up - speed 40000 Mbps - full-duplex 26/11/2019 17:05:15 tester: scapy 26/11/2019 17:05:16 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). WARNING: No route found for IPv6 destination :: (no default route?) INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.3  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/scapy  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like I craft my beer.  scccccp///pSP///p p//Y | -- Jean De Clerck  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.0")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.1")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.2")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.3")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.4")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.5")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.6")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.7")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.8")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:16 tester: . Sent 1 packets. 26/11/2019 17:05:16 tester: sendp([Ether()/IP(dst="198.0.0.9")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.10")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.11")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.12")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.13")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.14")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.15")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.16")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.17")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:17 tester: . Sent 1 packets. 26/11/2019 17:05:17 tester: sendp([Ether()/IP(dst="198.0.0.18")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:18 tester: . Sent 1 packets. 26/11/2019 17:05:18 tester: sendp([Ether()/IP(dst="198.0.0.19")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:18 tester: . Sent 1 packets. 26/11/2019 17:05:18 tester: quit() 26/11/2019 17:05:18 tester: 26/11/2019 17:05:23 dut.10.238.54.218: : entering main loop on lcore 1 L3FWD_POWER: -- lcoreid=1 portid=0 rxqueueid=1 L3FWD_POWER: entering main loop on lcore 3 L3FWD_POWER: -- lcoreid=3 portid=0 rxqueueid=3 L3FWD_POWER: entering main loop on lcore 4 L3FWD_POWER: -- lcoreid=4 portid=0 rxqueueid=4 L3FWD_POWER: entering main loop on lcore 0 L3FWD_POWER: entering main loop on lcore 2 L3FWD_POWER: -- lcoreid=2 portid=0 rxqueueid=2 L3FWD_POWER: lcore 5 has nothing to do L3FWD_POWER: -- lcoreid=0 portid=0 rxqueueid=0 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers 26/11/2019 17:05:23 dut.10.238.54.218: kill_all: called by dut and has no prefix list. 26/11/2019 17:05:26 dut.10.238.54.218: Killed [PEXPECT]# 26/11/2019 17:05:26 dut.10.238.54.218: ./examples/l3fwd-power/build/l3fwd-power -c 0xffffff -n 4 -- -p 0x3 -P --config='(0,0,0),(0,1,1),(0,2,2),(0,3,3), (0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),(1,1,9),(1,2,10),(1,3,11), (1,4,12),(1,5,13),(1,6,14)' 26/11/2019 17:05:28 dut.10.238.54.218: EAL: Detected 72 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'VA' EAL: Probing VFIO support... EAL: VFIO support initialized EAL: PCI device 0000:00:04.0 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.1 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.2 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.3 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.4 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.5 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.6 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:00:04.7 on NUMA socket 0 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:18:00.0 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: using IOMMU type 1 (Type 1) EAL: PCI device 0000:18:00.1 on NUMA socket 0 EAL: probe driver: 8086:1583 net_i40e EAL: PCI device 0000:3d:00.0 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:3d:00.1 on NUMA socket 0 EAL: probe driver: 8086:37d2 net_i40e EAL: PCI device 0000:80:04.0 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.1 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.2 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.3 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.4 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.5 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.6 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:80:04.7 on NUMA socket 1 EAL: probe driver: 8086:2021 rawdev_ioat EAL: PCI device 0000:86:00.0 on NUMA socket 1 EAL: probe driver: 8086:1528 net_ixgbe EAL: PCI device 0000:86:00.1 on NUMA socket 1 EAL: probe driver: 8086:1528 net_ixgbe Promiscuous mode selected POWER: Env isn't set yet! POWER: Attempting to initialise ACPI cpufreq power management... POWER: Initialized successfully for lcore 0 power management POWER: Initialized successfully for lcore 1 power management POWER: Initialized successfully for lcore 2 power management POWER: Initialized successfully for lcore 3 power management POWER: Initialized successfully for lcore 4 power management POWER: Initialized successfully for lcore 5 power management POWER: Initialized successfully for lcore 6 power management POWER: Initialized successfully for lcore 7 power management POWER: Initialized successfully for lcore 8 power management POWER: Initialized successfully for lcore 9 power management POWER: Initialized successfully for lcore 10 power management POWER: Initialized successfully for lcore 11 power management POWER: Initialized successfully for lcore 12 power management POWER: Initialized successfully for lcore 13 power management POWER: Initialized successfully for lcore 14 power management POWER: Initialized successfully for lcore 15 power management POWER: Initialized successfully for lcore 16 power management POWER: Initialized successfully for lcore 17 power management POWER: Initialized successfully for lcore 18 power management POWER: Initialized successfully for lcore 19 power management POWER: Initialized successfully for lcore 20 power management POWER: Initialized successfully for lcore 21 power management POWER: Initialized successfully for lcore 22 power management POWER: Initialized successfully for lcore 23 power management Initializing port 0 ... Creating queues: nb_rxq=8 nb_txq=24... Port 0 modified RSS hash function based on hardware support,requested:0x20820 configured:0x820 Address:68:05:CA:0D:BC:00, Allocated mbuf pool on socket 0 LPM: Adding route 0x01010100 / 24 (0) LPM: Adding route 0x02010100 / 24 (1) LPM: Adding route 0x03010100 / 24 (2) LPM: Adding route 0x04010100 / 24 (3) LPM: Adding route 0x05010100 / 24 (4) LPM: Adding route 0x06010100 / 24 (5) LPM: Adding route 0x07010100 / 24 (6) LPM: Adding route 0x08010100 / 24 (7) Allocated mbuf pool on socket 1 LPM: Adding route 0x01010100 / 24 (0) LPM: Adding route 0x02010100 / 24 (1) LPM: Adding route 0x03010100 / 24 (2) LPM: Adding route 0x04010100 / 24 (3) LPM: Adding route 0x05010100 / 24 (4) LPM: Adding route 0x06010100 / 24 (5) LPM: Adding route 0x07010100 / 24 (6) LPM: Adding route 0x08010100 / 24 (7) txq=0,0,0 txq=1,1,0 txq=2,2,0 txq=3,3,0 txq=4,4,0 txq=5,5,0 txq=6,6,0 txq=7,7,0 txq=8,8,0 txq=9,9,0 txq=10,10,0 txq=11,11,0 txq=12,12,0 txq=13,13,0 txq=14,14,0 txq=15,15,0 txq=16,16,0 txq=17,17,0 txq=18,18,1 txq=19,19,1 txq=20,20,1 txq=21,21,1 txq=22,22,1 txq=23,23,1 Initializing port 1 ... Creating queues: nb_rxq=7 nb_txq=24... Port 1 modified RSS hash function based on hardware support,requested:0x20820 configured:0x820 Address:68:05:CA:0D:BC:01, txq=0,0,0 txq=1,1,0 txq=2,2,0 txq=3,3,0 txq=4,4,0 txq=5,5,0 txq=6,6,0 txq=7,7,0 txq=8,8,0 txq=9,9,0 txq=10,10,0 txq=11,11,0 txq=12,12,0 txq=13,13,0 txq=14,14,0 txq=15,15,0 txq=16,16,0 txq=17,17,0 txq=18,18,1 txq=19,19,1 txq=20,20,1 txq=21,21,1 txq=22,22,1 txq=23,23,1 Initializing rx queues on lcore 0 ... rxq=0,0,0 Initializing rx queues on lcore 1 ... rxq=0,1,0 Initializing rx queues on lcore 2 ... rxq=0,2,0 Initializing rx queues on lcore 3 ... rxq=0,3,0 Initializing rx queues on lcore 4 ... rxq=0,4,0 Initializing rx queues on lcore 5 ... rxq=0,5,0 Initializing rx queues on lcore 6 ... rxq=0,6,0 Initializing rx queues on lcore 7 ... rxq=0,7,0 Initializing rx queues on lcore 8 ... rxq=1,0,0 Initializing rx queues on lcore 9 ... rxq=1,1,0 Initializing rx queues on lcore 10 ... rxq=1,2,0 Initializing rx queues on lcore 11 ... rxq=1,3,0 Initializing rx queues on lcore 12 ... rxq=1,4,0 Initializing rx queues on lcore 13 ... rxq=1,5,0 Initializing rx queues on lcore 14 ... rxq=1,6,0 Initializing rx queues on lcore 15 ... Initializing rx queues on lcore 16 ... Initializing rx queues on lcore 17 ... Initializing rx queues on lcore 18 ... Initializing rx queues on lcore 19 ... Initializing rx queues on lcore 20 ... Initializing rx queues on lcore 21 ... Initializing rx queues on lcore 22 ... Initializing rx queues on lcore 23 ... Checking link statusdone Port 0 Link Up - speed 40000 Mbps - full-duplex Port 1 Link Up - speed 40000 Mbps - full-duplex 26/11/2019 17:05:28 tester: scapy 26/11/2019 17:05:28 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). WARNING: No route found for IPv6 destination :: (no default route?) INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.3  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/scapy  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    26/11/2019 17:05:28 tester: sendp([Ether()/IP(dst="198.0.0.0")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:28 tester: . Sent 1 packets. 26/11/2019 17:05:28 tester: sendp([Ether()/IP(dst="198.0.0.1")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.2")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.3")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.4")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.5")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.6")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.7")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.8")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.9")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.10")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:29 tester: . Sent 1 packets. 26/11/2019 17:05:29 tester: sendp([Ether()/IP(dst="198.0.0.11")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.12")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.13")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.14")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.15")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.16")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.17")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.18")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.19")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.20")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.21")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:30 tester: . Sent 1 packets. 26/11/2019 17:05:30 tester: sendp([Ether()/IP(dst="198.0.0.22")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.23")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.24")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.25")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.26")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.27")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.28")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.29")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.30")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.31")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:31 tester: . Sent 1 packets. 26/11/2019 17:05:31 tester: sendp([Ether()/IP(dst="198.0.0.32")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.33")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.34")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.35")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.36")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.37")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.38")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.39")/UDP()/Raw('X'*18)], iface="ens13") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.0")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.1")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:32 tester: . Sent 1 packets. 26/11/2019 17:05:32 tester: sendp([Ether()/IP(dst="198.0.0.2")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.3")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.4")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.5")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.6")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.7")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.8")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.9")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.10")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.11")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:33 tester: . Sent 1 packets. 26/11/2019 17:05:33 tester: sendp([Ether()/IP(dst="198.0.0.12")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.13")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.14")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.15")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.16")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.17")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.18")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.19")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.20")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.21")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:34 tester: . Sent 1 packets. 26/11/2019 17:05:34 tester: sendp([Ether()/IP(dst="198.0.0.22")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.23")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.24")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.25")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.26")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.27")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.28")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.29")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.30")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.31")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.32")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:35 tester: . Sent 1 packets. 26/11/2019 17:05:35 tester: sendp([Ether()/IP(dst="198.0.0.33")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: sendp([Ether()/IP(dst="198.0.0.34")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: sendp([Ether()/IP(dst="198.0.0.35")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: sendp([Ether()/IP(dst="198.0.0.36")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: sendp([Ether()/IP(dst="198.0.0.37")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: sendp([Ether()/IP(dst="198.0.0.38")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: sendp([Ether()/IP(dst="198.0.0.39")/UDP()/Raw('X'*18)], iface="ens14") 26/11/2019 17:05:36 tester: . Sent 1 packets. 26/11/2019 17:05:36 tester: quit() 26/11/2019 17:05:36 tester: 26/11/2019 17:05:41 dut.10.238.54.218: : entering main loop on lcore 1 L3FWD_POWER: -- lcoreid=1 portid=0 rxqueueid=1 L3FWD_POWER: entering main loop on lcore 2 L3FWD_POWER: -- lcoreid=2 portid=0 rxqueueid=2 L3FWD_POWER: entering main loop on lcore 3 L3FWD_POWER: -- lcoreid=3 portid=0 rxqueueid=3 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: entering main loop on lcore 4 L3FWD_POWER: -- lcoreid=4 portid=0 rxqueueid=4 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: entering main loop on lcore 5 L3FWD_POWER: -- lcoreid=5 portid=0 rxqueueid=5 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 5 sleeps until interrupt triggers L3FWD_POWER: entering main loop on lcore 6 L3FWD_POWER: -- lcoreid=6 portid=0 rxqueueid=6 L3FWD_POWER: entering main loop on lcore 8 L3FWD_POWER: -- lcoreid=8 portid=1 rxqueueid=0 L3FWD_POWER: entering main loop on lcore 11 L3FWD_POWER: -- lcoreid=11 portid=1 rxqueueid=3 L3FWD_POWER: entering main loop on lcore 12 L3FWD_POWER: -- lcoreid=12 portid=1 rxqueueid=4 L3FWD_POWER: entering main loop on lcore 7 L3FWD_POWER: -- lcoreid=7 portid=0 rxqueueid=7 L3FWD_POWER: lcore 6 sleeps until interrupt triggers L3FWD_POWER: entering main loop on lcore 14 L3FWD_POWER: -- lcoreid=14 portid=1 rxqueueid=6 L3FWD_POWER: entering main loop on lcore 10 L3FWD_POWER: -- lcoreid=10 portid=1 rxqueueid=2 L3FWD_POWER: lcore 16 has nothing to do L3FWD_POWER: entering main loop on lcore 13 L3FWD_POWER: -- lcoreid=13 portid=1 rxqueueid=5 L3FWD_POWER: lcore 11 sleeps until interrupt triggers L3FWD_POWER: lcore 17 has nothing to do L3FWD_POWER: lcore 15 has nothing to do L3FWD_POWER: lcore 8 sleeps until interrupt triggers L3FWD_POWER: lcore 19 has nothing to do L3FWD_POWER: entering main loop on lcore 9 L3FWD_POWER: -- lcoreid=9 portid=1 rxqueueid=1 L3FWD_POWER: lcore 18 has nothing to do L3FWD_POWER: lcore 21 has nothing to do L3FWD_POWER: lcore 20 has nothing to do L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 23 has nothing to do L3FWD_POWER: lcore 22 has nothing to do L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 13 sleeps until interrupt triggers L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 9 sleeps until interrupt triggers L3FWD_POWER: entering main loop on lcore 0 L3FWD_POWER: -- lcoreid=0 portid=0 rxqueueid=0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 5 is waked up from rx interrupt on port 0 queue 5 L3FWD_POWER: lcore 5 sleeps until interrupt triggers L3FWD_POWER: lcore 6 is waked up from rx interrupt on port 0 queue 6 L3FWD_POWER: lcore 6 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 6 is waked up from rx interrupt on port 0 queue 6 L3FWD_POWER: lcore 6 sleeps until interrupt triggers L3FWD_POWER: lcore 5 is waked up from rx interrupt on port 0 queue 5 L3FWD_POWER: lcore 5 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 5 is waked up from rx interrupt on port 0 queue 5 L3FWD_POWER: lcore 5 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 6 is waked up from rx interrupt on port 0 queue 6 L3FWD_POWER: lcore 6 sleeps until interrupt triggers L3FWD_POWER: lcore 6 is waked up from rx interrupt on port 0 queue 6 L3FWD_POWER: lcore 6 sleeps until interrupt triggers L3FWD_POWER: lcore 3 is waked up from rx interrupt on port 0 queue 3 L3FWD_POWER: lcore 3 sleeps until interrupt triggers L3FWD_POWER: lcore 0 is waked up from rx interrupt on port 0 queue 0 L3FWD_POWER: lcore 0 sleeps until interrupt triggers L3FWD_POWER: lcore 5 is waked up from rx interrupt on port 0 queue 5 L3FWD_POWER: lcore 5 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 7 is waked up from rx interrupt on port 0 queue 7 L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 7 is waked up from rx interrupt on port 0 queue 7 L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 7 is waked up from rx interrupt on port 0 queue 7 L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 7 is waked up from rx interrupt on port 0 queue 7 L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 7 is waked up from rx interrupt on port 0 queue 7 L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 2 L3FWD_POWER: lcore 2 sleeps until interrupt triggers L3FWD_POWER: lcore 7 is waked up from rx interrupt on port 0 queue 7 L3FWD_POWER: lcore 7 sleeps until interrupt triggers L3FWD_POWER: lcore 4 is waked up from rx interrupt on port 0 queue 4 L3FWD_POWER: lcore 4 sleeps until interrupt triggers L3FWD_POWER: lcore 1 is waked up from rx interrupt on port 0 queue 1 L3FWD_POWER: lcore 1 sleeps until interrupt triggers L3FWD_POWER: lcore 8 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 8 sleeps until interrupt triggers L3FWD_POWER: lcore 8 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 8 sleeps until interrupt triggers L3FWD_POWER: lcore 11 is waked up from rx interrupt on port 1 queue 3 L3FWD_POWER: lcore 11 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 9 is waked up from rx interrupt on port 1 queue 1 L3FWD_POWER: lcore 9 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 8 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 8 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 14 is waked up from rx interrupt on port 1 queue 6 L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 14 is waked up from rx interrupt on port 1 queue 6 L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 13 is waked up from rx interrupt on port 1 queue 5 L3FWD_POWER: lcore 13 sleeps until interrupt triggers L3FWD_POWER: lcore 9 is waked up from rx interrupt on port 1 queue 1 L3FWD_POWER: lcore 9 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 9 is waked up from rx interrupt on port 1 queue 1 L3FWD_POWER: lcore 9 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 8 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 8 sleeps until interrupt triggers L3FWD_POWER: lcore 11 is waked up from rx interrupt on port 1 queue 3 L3FWD_POWER: lcore 11 sleeps until interrupt triggers L3FWD_POWER: lcore 13 is waked up from rx interrupt on port 1 queue 5 L3FWD_POWER: lcore 13 sleeps until interrupt triggers L3FWD_POWER: lcore 14 is waked up from rx interrupt on port 1 queue 6 L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 9 is waked up from rx interrupt on port 1 queue 1 L3FWD_POWER: lcore 9 sleeps until interrupt triggers L3FWD_POWER: lcore 11 is waked up from rx interrupt on port 1 queue 3 L3FWD_POWER: lcore 11 sleeps until interrupt triggers L3FWD_POWER: lcore 14 is waked up from rx interrupt on port 1 queue 6 L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 14 is waked up from rx interrupt on port 1 queue 6 L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 8 is waked up from rx interrupt on port 1 queue 0 L3FWD_POWER: lcore 8 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 13 is waked up from rx interrupt on port 1 queue 5 L3FWD_POWER: lcore 13 sleeps until interrupt triggers L3FWD_POWER: lcore 14 is waked up from rx interrupt on port 1 queue 6 L3FWD_POWER: lcore 14 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers L3FWD_POWER: lcore 9 is waked up from rx interrupt on port 1 queue 1 L3FWD_POWER: lcore 9 sleeps until interrupt triggers L3FWD_POWER: lcore 12 is waked up from rx interrupt on port 1 queue 4 L3FWD_POWER: lcore 12 sleeps until interrupt triggers L3FWD_POWER: lcore 10 is waked up from rx interrupt on port 1 queue 2 L3FWD_POWER: lcore 10 sleeps until interrupt triggers 26/11/2019 17:05:41 TestInterruptPmd: Test Case test_different_queue Result PASSED: 26/11/2019 17:05:41 dut.10.238.54.218: kill_all: called by dut and has no prefix list. 26/11/2019 17:05:44 dut.10.238.54.218: Killed [PEXPECT]# 26/11/2019 17:05:44 dut.10.238.54.218: kill_all: called by dut and has no prefix list. 26/11/2019 17:05:45 dut.10.238.54.218: kill_all: called by dut and has no prefix list. 26/11/2019 17:05:46 dts: TEST SUITE ENDED: TestInterruptPmd