* [dts] [PATCH] tests: add hotplug on multi-processes test suite
@ 2018-11-27 5:30 Xueqin Lin
2018-12-06 8:56 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Xueqin Lin @ 2018-11-27 5:30 UTC (permalink / raw)
To: dts; +Cc: xueqin.lin
From: "xueqin.lin" <xueqin.lin@intel.com>
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
---
tests/TestSuite_hotplug_mp.py | 310 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 310 insertions(+)
create mode 100644 tests/TestSuite_hotplug_mp.py
diff --git a/tests/TestSuite_hotplug_mp.py b/tests/TestSuite_hotplug_mp.py
new file mode 100644
index 0000000..20f914a
--- /dev/null
+++ b/tests/TestSuite_hotplug_mp.py
@@ -0,0 +1,310 @@
+# <COPYRIGHT_TAG>
+
+"""
+DPDK Test suite.
+Hotplug Multi-process Test.
+"""
+
+import utils
+import time
+from test_case import TestCase
+
+test_loop = 2
+
+
+class TestHotplugMp(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+ self.intf0 = self.dut.ports_info[0]['intf']
+ self.pci0 = self.dut.ports_info[0]['pci']
+ out = self.dut.build_dpdk_apps("./examples/multi_process/hotplug_mp")
+ self.verify('Error' not in out, "Compilation failed")
+ # Start one new session to run primary process
+ self.session_pri = self.dut.new_session()
+ # Start two new sessions to run secondary process
+ self.session_sec_1 = self.dut.new_session()
+ self.session_sec_2 = self.dut.new_session()
+ if self.drivername != "":
+ self.dut.bind_interfaces_linux(self.kdriver)
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def multi_process_setup(self):
+ """
+ Setup primary process and two secondary processes.
+ """
+ out = self.session_pri.send_expect(
+ "./examples/multi_process/hotplug_mp/%s/hotplug_mp --proc-type=auto"
+ % self.target, "example>")
+ self.verify("Auto-detected process type: PRIMARY" in out,
+ "Failed to setup primary process!")
+ for out in [self.session_sec_1.send_expect(
+ "./examples/multi_process/hotplug_mp/%s/hotplug_mp --proc-type=auto"
+ % self.target, "example>"),
+ self.session_sec_2.send_expect(
+ "./examples/multi_process/hotplug_mp/%s/hotplug_mp --proc-type=auto"
+ % self.target, "example>")]:
+ self.verify("Auto-detected process type: SECONDARY" in out,
+ "Failed to setup secondary process!")
+
+ def multi_process_quit(self):
+ """
+ Quit primary process and two secondary processes.
+ """
+ self.session_sec_1.send_expect("quit", "#")
+ self.session_sec_2.send_expect("quit", "#")
+ self.session_pri.send_expect("quit", "#")
+
+ def verify_devlist(self, dev="0000:00:00.0", flg_exist=1):
+ """
+ Check device list to verify if exist the device.
+ """
+ for out in [self.session_pri.send_expect("list", "example>", 100),
+ self.session_sec_1.send_expect("list", "example>", 100),
+ self.session_sec_2.send_expect("list", "example>", 100)]:
+ self.verify("list all etherdev" in out,
+ "Failed to list device on multi-process!")
+ if flg_exist == 1:
+ self.verify(dev in out, "Fail that don't have the device!")
+ if flg_exist == 0:
+ self.verify(dev not in out, "Fail that have the device!")
+
+ def attach_detach(self, process="pri", is_dev=1, opt_plug="plugin", flg_loop=0, dev="0000:00:00.0"):
+ """
+ Attach or detach physical/virtual device from primary/secondary
+ process.
+ process: define primary or secondary process.
+ is_dev: define physical device as 1, virtual device as 0.
+ opt_plug: define plug options as below
+ plugin: plug in device
+ plugout: plug out device
+ hotplug: plug in then plug out device from primary or
+ secondary process
+ crossplug: plug in from primary process then plug out from
+ secondary process, or plug in from secondary
+ process then plug out from primary
+ flg_loop: define loop test flag
+ dev: define physical device PCI "0000:00:00.0" or virtual device
+ "net_af_packet"
+ """
+
+ if opt_plug == "plugin":
+ self.verify_devlist(dev, flg_exist=0)
+ for i in range(test_loop):
+ if process == "pri":
+ if is_dev == 0:
+ self.session_pri.send_expect(
+ "attach %s,iface=%s"
+ % (dev, self.intf0), "example>", 100)
+ else:
+ self.session_pri.send_expect(
+ "attach %s" % dev, "example>", 100)
+ if process == "sec":
+ if is_dev == 0:
+ self.session_sec_1.send_expect(
+ "attach %s,iface=%s"
+ % (dev, self.intf0), "example>", 100)
+ else:
+ self.session_sec_1.send_expect(
+ "attach %s" % dev, "example>", 100)
+ if flg_loop == 0:
+ break
+
+ self.verify_devlist(dev, flg_exist=1)
+
+ if opt_plug == "plugout":
+ self.verify_devlist(dev, flg_exist=1)
+ for i in range(test_loop):
+ if process == "pri":
+ self.session_pri.send_expect(
+ "detach %s" % dev, "example>", 100)
+ if process == "sec":
+ self.session_sec_1.send_expect(
+ "detach %s" % dev, "example>", 100)
+ if flg_loop == 0:
+ break
+
+ self.verify_devlist(dev, flg_exist=0)
+
+ def attach_detach_dev(self, process="pri", opt_plug="plugin", flg_loop=0, dev="0000:00:00.0"):
+ """
+ Attach or detach physical device from primary/secondary process.
+ """
+ # Scan port status when example setup, list ports that have been
+ # bound to pmd
+ if opt_plug in ["plugin", "hotplug", "crossplug"]:
+ self.multi_process_setup()
+ self.dut.bind_interfaces_linux(self.drivername)
+ elif opt_plug == "plugout":
+ self.dut.bind_interfaces_linux(self.drivername)
+ self.multi_process_setup()
+
+ if opt_plug in ["plugin", "plugout"]:
+ self.attach_detach(process, 1, opt_plug, flg_loop, dev)
+ elif opt_plug in ["hotplug", "crossplug"]:
+ for i in range(test_loop):
+ self.attach_detach(process, 1, "plugin", flg_loop, dev)
+ if opt_plug == "crossplug":
+ if process == "pri":
+ cross_proc = "sec"
+ elif process == "sec":
+ cross_proc = "pri"
+ self.attach_detach(cross_proc, 1, "plugout", flg_loop, dev)
+ else:
+ self.attach_detach(process, 1, "plugout", flg_loop, dev)
+
+ self.multi_process_quit()
+ self.dut.bind_interfaces_linux(self.kdriver)
+
+ def attach_detach_vdev(self, process="pri", opt_plug="plugin", flg_loop=0, dev="net_af_packet"):
+ """
+ Attach or detach virtual device from primary/secondary process.
+ Check port interface is at link up status before hotplug test.
+ If link not up, may have below error:
+ rte_pmd_init_internals(): net_af_packet: ioctl failed (SIOCGIFINDEX)
+ EAL: Driver cannot attach the device (net_af_packet)
+ """
+ self.dut.send_expect("ifconfig %s up" % self.intf0, "#")
+ time.sleep(5)
+ out = self.dut.send_expect("ethtool %s" % self.intf0, "#")
+ self.verify("Link detected: yes" in out, "Wrong link status")
+
+ self.multi_process_setup()
+ for i in range(test_loop):
+ self.attach_detach(process, 0, "plugin", flg_loop, dev)
+ if opt_plug in ["plugout", "hotplug", "crossplug"]:
+ if opt_plug == "crossplug":
+ if process == "pri":
+ cross_proc = "sec"
+ elif process == "sec":
+ cross_proc = "pri"
+ self.attach_detach(cross_proc, 0, "plugout", flg_loop, dev)
+ else:
+ self.attach_detach(process, 0, "plugout", flg_loop, dev)
+
+ if opt_plug == "plugin" or opt_plug == "plugout":
+ break
+
+ self.multi_process_quit()
+
+ def test_attach_dev_primary(self):
+ """
+ Attach physical device from primary.
+ """
+ self.attach_detach_dev("pri", "plugin", 0, self.pci0)
+
+ def test_attach_dev_secondary(self):
+ """
+ Attach physical device from secondary.
+ """
+ self.attach_detach_dev("sec", "plugin", 0, self.pci0)
+
+ def test_detach_dev_primary(self):
+ """
+ Detach physical device from primary.
+ """
+ self.attach_detach_dev("pri", "plugout", 0, self.pci0)
+
+ def test_detach_dev_secondary(self):
+ """
+ Detach physical device from secondary.
+ """
+ self.attach_detach_dev("sec", "plugout", 0, self.pci0)
+
+ def test_attach_detach_dev_primary_loop(self):
+ """
+ Repeat to attach then detach physical device from primary.
+ """
+ self.attach_detach_dev("pri", "hotplug", 1, self.pci0)
+
+ def test_attach_detach_dev_secondary_loop(self):
+ """
+ Repeat to attach then detach physical device from secondary.
+ """
+ self.attach_detach_dev("sec", "hotplug", 1, self.pci0)
+
+ def test_attach_detach_dev_primary_cross_loop(self):
+ """
+ Repeat to attach physical device from primary then detach device
+ from secondary.
+ """
+ self.attach_detach_dev("pri", "crossplug", 1, self.pci0)
+
+ def test_attach_detach_dev_secondary_cross_loop(self):
+ """
+ Repeat to attach physical device from secondary then detach device
+ from primary.
+ """
+ self.attach_detach_dev("sec", "crossplug", 1, self.pci0)
+
+ def test_attach_vdev_primary(self):
+ """
+ Attach virtual device from primary.
+ """
+ self.attach_detach_vdev("pri", "plugin", 0, "net_af_packet")
+
+ def test_attach_vdev_secondary(self):
+ """
+ Attach virtual device from secondary.
+ """
+ self.attach_detach_vdev("sec", "plugin", 0, "net_af_packet")
+
+ def test_detach_vdev_primary(self):
+ """
+ Detach virtual device from primary.
+ """
+ self.attach_detach_vdev("pri", "plugout", 0, "net_af_packet")
+
+ def test_detach_vdev_secondary(self):
+ """
+ Detach virtual device from secondary.
+ """
+ self.attach_detach_vdev("sec", "plugout", 0, "net_af_packet")
+
+ def test_attach_detach_vdev_primary_loop(self):
+ """
+ Repeat to attach then detach virtual device from primary.
+ """
+ self.attach_detach_vdev("pri", "hotplug", 1, "net_af_packet")
+
+ def test_attach_detach_vdev_secondary_loop(self):
+ """
+ Repeat to attach then detach virtual device from secondary.
+ """
+ self.attach_detach_vdev("sec", "hotplug", 1, "net_af_packet")
+
+ def test_attach_detach_vdev_primary_cross_loop(self):
+ """
+ Repeat to attach virtual device from primary then detach device
+ from secondary.
+ """
+ self.attach_detach_vdev("pri", "crossplug", 1, "net_af_packet")
+
+ def test_attach_detach_vdev_secondary_cross_loop(self):
+ """
+ Repeat to attach virtual device from secondary then detach device
+ from primary.
+ """
+ self.attach_detach_vdev("sec", "crossplug", 1, "net_af_packet")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ pass
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.close_session(self.dut)
+ self.dut.kill_all()
--
2.7.5
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH] tests: add hotplug on multi-processes test suite
2018-11-27 5:30 [dts] [PATCH] tests: add hotplug on multi-processes test suite Xueqin Lin
@ 2018-12-06 8:56 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2018-12-06 8:56 UTC (permalink / raw)
To: Lin, Xueqin, dts; +Cc: Lin, Xueqin
Hi xueqin,
This patch was applied on Nov 27th, thanks.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xueqin Lin
> Sent: Tuesday, November 27, 2018 1:30 PM
> To: dts@dpdk.org
> Cc: Lin, Xueqin <xueqin.lin@intel.com>
> Subject: [dts] [PATCH] tests: add hotplug on multi-processes test suite
>
> From: "xueqin.lin" <xueqin.lin@intel.com>
>
> Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
>
> ---
> tests/TestSuite_hotplug_mp.py | 310
> ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 310 insertions(+)
> create mode 100644 tests/TestSuite_hotplug_mp.py
>
> diff --git a/tests/TestSuite_hotplug_mp.py b/tests/TestSuite_hotplug_mp.py
> new file mode 100644 index 0000000..20f914a
> --- /dev/null
> +++ b/tests/TestSuite_hotplug_mp.py
> @@ -0,0 +1,310 @@
> +# <COPYRIGHT_TAG>
> +
> +"""
> +DPDK Test suite.
> +Hotplug Multi-process Test.
> +"""
> +
> +import utils
> +import time
> +from test_case import TestCase
> +
> +test_loop = 2
> +
> +
> +class TestHotplugMp(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
> + self.intf0 = self.dut.ports_info[0]['intf']
> + self.pci0 = self.dut.ports_info[0]['pci']
> + out =
> self.dut.build_dpdk_apps("./examples/multi_process/hotplug_mp")
> + self.verify('Error' not in out, "Compilation failed")
> + # Start one new session to run primary process
> + self.session_pri = self.dut.new_session()
> + # Start two new sessions to run secondary process
> + self.session_sec_1 = self.dut.new_session()
> + self.session_sec_2 = self.dut.new_session()
> + if self.drivername != "":
> + self.dut.bind_interfaces_linux(self.kdriver)
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def multi_process_setup(self):
> + """
> + Setup primary process and two secondary processes.
> + """
> + out = self.session_pri.send_expect(
> + "./examples/multi_process/hotplug_mp/%s/hotplug_mp
> --proc-type=auto"
> + % self.target, "example>")
> + self.verify("Auto-detected process type: PRIMARY" in out,
> + "Failed to setup primary process!")
> + for out in [self.session_sec_1.send_expect(
> +
> "./examples/multi_process/hotplug_mp/%s/hotplug_mp --proc-type=auto"
> + % self.target, "example>"),
> + self.session_sec_2.send_expect(
> +
> "./examples/multi_process/hotplug_mp/%s/hotplug_mp --proc-type=auto"
> + % self.target, "example>")]:
> + self.verify("Auto-detected process type: SECONDARY" in out,
> + "Failed to setup secondary process!")
> +
> + def multi_process_quit(self):
> + """
> + Quit primary process and two secondary processes.
> + """
> + self.session_sec_1.send_expect("quit", "#")
> + self.session_sec_2.send_expect("quit", "#")
> + self.session_pri.send_expect("quit", "#")
> +
> + def verify_devlist(self, dev="0000:00:00.0", flg_exist=1):
> + """
> + Check device list to verify if exist the device.
> + """
> + for out in [self.session_pri.send_expect("list", "example>", 100),
> + self.session_sec_1.send_expect("list", "example>",
> 100),
> + self.session_sec_2.send_expect("list", "example>",
> 100)]:
> + self.verify("list all etherdev" in out,
> + "Failed to list device on multi-process!")
> + if flg_exist == 1:
> + self.verify(dev in out, "Fail that don't have the device!")
> + if flg_exist == 0:
> + self.verify(dev not in out, "Fail that have the
> + device!")
> +
> + def attach_detach(self, process="pri", is_dev=1, opt_plug="plugin",
> flg_loop=0, dev="0000:00:00.0"):
> + """
> + Attach or detach physical/virtual device from primary/secondary
> + process.
> + process: define primary or secondary process.
> + is_dev: define physical device as 1, virtual device as 0.
> + opt_plug: define plug options as below
> + plugin: plug in device
> + plugout: plug out device
> + hotplug: plug in then plug out device from primary or
> + secondary process
> + crossplug: plug in from primary process then plug out
> from
> + secondary process, or plug in from
> secondary
> + process then plug out from primary
> + flg_loop: define loop test flag
> + dev: define physical device PCI "0000:00:00.0" or virtual device
> + "net_af_packet"
> + """
> +
> + if opt_plug == "plugin":
> + self.verify_devlist(dev, flg_exist=0)
> + for i in range(test_loop):
> + if process == "pri":
> + if is_dev == 0:
> + self.session_pri.send_expect(
> + "attach %s,iface=%s"
> + % (dev, self.intf0), "example>", 100)
> + else:
> + self.session_pri.send_expect(
> + "attach %s" % dev, "example>", 100)
> + if process == "sec":
> + if is_dev == 0:
> + self.session_sec_1.send_expect(
> + "attach %s,iface=%s"
> + % (dev, self.intf0), "example>", 100)
> + else:
> + self.session_sec_1.send_expect(
> + "attach %s" % dev, "example>", 100)
> + if flg_loop == 0:
> + break
> +
> + self.verify_devlist(dev, flg_exist=1)
> +
> + if opt_plug == "plugout":
> + self.verify_devlist(dev, flg_exist=1)
> + for i in range(test_loop):
> + if process == "pri":
> + self.session_pri.send_expect(
> + "detach %s" % dev, "example>", 100)
> + if process == "sec":
> + self.session_sec_1.send_expect(
> + "detach %s" % dev, "example>", 100)
> + if flg_loop == 0:
> + break
> +
> + self.verify_devlist(dev, flg_exist=0)
> +
> + def attach_detach_dev(self, process="pri", opt_plug="plugin",
> flg_loop=0, dev="0000:00:00.0"):
> + """
> + Attach or detach physical device from primary/secondary
> process.
> + """
> + # Scan port status when example setup, list ports that have been
> + # bound to pmd
> + if opt_plug in ["plugin", "hotplug", "crossplug"]:
> + self.multi_process_setup()
> + self.dut.bind_interfaces_linux(self.drivername)
> + elif opt_plug == "plugout":
> + self.dut.bind_interfaces_linux(self.drivername)
> + self.multi_process_setup()
> +
> + if opt_plug in ["plugin", "plugout"]:
> + self.attach_detach(process, 1, opt_plug, flg_loop, dev)
> + elif opt_plug in ["hotplug", "crossplug"]:
> + for i in range(test_loop):
> + self.attach_detach(process, 1, "plugin", flg_loop, dev)
> + if opt_plug == "crossplug":
> + if process == "pri":
> + cross_proc = "sec"
> + elif process == "sec":
> + cross_proc = "pri"
> + self.attach_detach(cross_proc, 1, "plugout",
> flg_loop, dev)
> + else:
> + self.attach_detach(process, 1, "plugout", flg_loop,
> + dev)
> +
> + self.multi_process_quit()
> + self.dut.bind_interfaces_linux(self.kdriver)
> +
> + def attach_detach_vdev(self, process="pri", opt_plug="plugin",
> flg_loop=0, dev="net_af_packet"):
> + """
> + Attach or detach virtual device from primary/secondary process.
> + Check port interface is at link up status before hotplug test.
> + If link not up, may have below error:
> + rte_pmd_init_internals(): net_af_packet: ioctl failed
> (SIOCGIFINDEX)
> + EAL: Driver cannot attach the device (net_af_packet)
> + """
> + self.dut.send_expect("ifconfig %s up" % self.intf0, "#")
> + time.sleep(5)
> + out = self.dut.send_expect("ethtool %s" % self.intf0, "#")
> + self.verify("Link detected: yes" in out, "Wrong link status")
> +
> + self.multi_process_setup()
> + for i in range(test_loop):
> + self.attach_detach(process, 0, "plugin", flg_loop, dev)
> + if opt_plug in ["plugout", "hotplug", "crossplug"]:
> + if opt_plug == "crossplug":
> + if process == "pri":
> + cross_proc = "sec"
> + elif process == "sec":
> + cross_proc = "pri"
> + self.attach_detach(cross_proc, 0, "plugout",
> flg_loop, dev)
> + else:
> + self.attach_detach(process, 0, "plugout", flg_loop,
> + dev)
> +
> + if opt_plug == "plugin" or opt_plug == "plugout":
> + break
> +
> + self.multi_process_quit()
> +
> + def test_attach_dev_primary(self):
> + """
> + Attach physical device from primary.
> + """
> + self.attach_detach_dev("pri", "plugin", 0, self.pci0)
> +
> + def test_attach_dev_secondary(self):
> + """
> + Attach physical device from secondary.
> + """
> + self.attach_detach_dev("sec", "plugin", 0, self.pci0)
> +
> + def test_detach_dev_primary(self):
> + """
> + Detach physical device from primary.
> + """
> + self.attach_detach_dev("pri", "plugout", 0, self.pci0)
> +
> + def test_detach_dev_secondary(self):
> + """
> + Detach physical device from secondary.
> + """
> + self.attach_detach_dev("sec", "plugout", 0, self.pci0)
> +
> + def test_attach_detach_dev_primary_loop(self):
> + """
> + Repeat to attach then detach physical device from primary.
> + """
> + self.attach_detach_dev("pri", "hotplug", 1, self.pci0)
> +
> + def test_attach_detach_dev_secondary_loop(self):
> + """
> + Repeat to attach then detach physical device from secondary.
> + """
> + self.attach_detach_dev("sec", "hotplug", 1, self.pci0)
> +
> + def test_attach_detach_dev_primary_cross_loop(self):
> + """
> + Repeat to attach physical device from primary then detach device
> + from secondary.
> + """
> + self.attach_detach_dev("pri", "crossplug", 1, self.pci0)
> +
> + def test_attach_detach_dev_secondary_cross_loop(self):
> + """
> + Repeat to attach physical device from secondary then detach
> device
> + from primary.
> + """
> + self.attach_detach_dev("sec", "crossplug", 1, self.pci0)
> +
> + def test_attach_vdev_primary(self):
> + """
> + Attach virtual device from primary.
> + """
> + self.attach_detach_vdev("pri", "plugin", 0, "net_af_packet")
> +
> + def test_attach_vdev_secondary(self):
> + """
> + Attach virtual device from secondary.
> + """
> + self.attach_detach_vdev("sec", "plugin", 0, "net_af_packet")
> +
> + def test_detach_vdev_primary(self):
> + """
> + Detach virtual device from primary.
> + """
> + self.attach_detach_vdev("pri", "plugout", 0, "net_af_packet")
> +
> + def test_detach_vdev_secondary(self):
> + """
> + Detach virtual device from secondary.
> + """
> + self.attach_detach_vdev("sec", "plugout", 0, "net_af_packet")
> +
> + def test_attach_detach_vdev_primary_loop(self):
> + """
> + Repeat to attach then detach virtual device from primary.
> + """
> + self.attach_detach_vdev("pri", "hotplug", 1, "net_af_packet")
> +
> + def test_attach_detach_vdev_secondary_loop(self):
> + """
> + Repeat to attach then detach virtual device from secondary.
> + """
> + self.attach_detach_vdev("sec", "hotplug", 1, "net_af_packet")
> +
> + def test_attach_detach_vdev_primary_cross_loop(self):
> + """
> + Repeat to attach virtual device from primary then detach device
> + from secondary.
> + """
> + self.attach_detach_vdev("pri", "crossplug", 1, "net_af_packet")
> +
> + def test_attach_detach_vdev_secondary_cross_loop(self):
> + """
> + Repeat to attach virtual device from secondary then detach
> device
> + from primary.
> + """
> + self.attach_detach_vdev("sec", "crossplug", 1, "net_af_packet")
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + pass
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.dut.close_session(self.dut)
> + self.dut.kill_all()
> --
> 2.7.5
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-12-06 8:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-27 5:30 [dts] [PATCH] tests: add hotplug on multi-processes test suite Xueqin Lin
2018-12-06 8:56 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).