* [dts] [PATCH V1] tests: add the suite of cryptodev unit-test
@ 2019-01-16 6:10 Xinfeng Zhao
2019-01-17 8:43 ` Zhao, XinfengX
2019-01-21 3:33 ` Tu, Lijuan
0 siblings, 2 replies; 4+ messages in thread
From: Xinfeng Zhao @ 2019-01-16 6:10 UTC (permalink / raw)
To: dts; +Cc: Xinfeng Zhao
add the methods of cryptodev common and the suite of cryptodev unit-test
Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
---
tests/TestSuite_cryptodev_common.py | 170 ++++++++++++++++++++++++++++
tests/TestSuite_cryptodev_func_unit-test.py | 137 ++++++++++++++++++++++
2 files changed, 307 insertions(+)
create mode 100644 tests/TestSuite_cryptodev_common.py
create mode 100644 tests/TestSuite_cryptodev_func_unit-test.py
diff --git a/tests/TestSuite_cryptodev_common.py b/tests/TestSuite_cryptodev_common.py
new file mode 100644
index 0000000..4cb8ec0
--- /dev/null
+++ b/tests/TestSuite_cryptodev_common.py
@@ -0,0 +1,170 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+def build_dpdk_with_cryptodev(test_case):
+ # Rebuild the dpdk with cryptodev pmds
+ snow3g_lib_path = "/root/libsso_snow3g/snow3g/"
+ if "snow3g_lib_path" in test_case.get_suite_cfg():
+ snow3g_lib_path = test_case.get_suite_cfg()["snow3g_lib_path"]
+
+ zuc_lib_path = "/root/libsso_zuc.1.0.1.1-8/zuc"
+ if "zuc_lib_path" in test_case.get_suite_cfg():
+ zuc_lib_path = test_case.get_suite_cfg()["zuc_lib_path"]
+
+ kasumi_lib_path = "/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/"
+ if "kasumi_lib_path" in test_case.get_suite_cfg():
+ kasumi_lib_path = test_case.get_suite_cfg()["kasumi_lib_path"]
+
+ test_case.dut.send_expect(
+ "export LIBSSO_SNOW3G_PATH={}".format(snow3g_lib_path), "#")
+ test_case.dut.send_expect(
+ "export LIBSSO_ZUC_PATH={}".format(zuc_lib_path), "#")
+ test_case.dut.send_expect(
+ "export LIBSSO_KASUMI_PATH={}".format(kasumi_lib_path), "#")
+
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/' config/common_base", "# ")
+
+ test_case.dut.skip_setup = False
+ test_case.dut.build_install_dpdk(test_case.dut.target)
+
+
+def bind_qat_device(test_case, driver = "igb_uio"):
+ if not driver:
+ test_case.logger.error("Please configure the driver of qat device to bind")
+ if driver == 'vfio-pci':
+ test_case.dut.send_expect('modprobe vfio-pci', '#', 10)
+
+ if "crypto_dev_id" in test_case.get_suite_cfg():
+ crypto_dev_id = test_case.get_suite_cfg()["crypto_dev_id"]
+ else:
+ crypto_dev_id = "443"
+ test_case.logger.info("crypto device id: " + crypto_dev_id)
+
+ # Bind QAT VF devices
+ out = test_case.dut.send_expect("lspci -d:{}|awk '{{print $1}}'".format(crypto_dev_id), "# ", 10)
+ crypto_list = out.replace("\r", "\n").replace("\n\n", "\n").split("\n")
+ test_case._crypto_pci = crypto_list[0]
+ test_case.dut.send_expect(
+ 'echo "8086 {}" > /sys/bus/pci/drivers/{}/new_id'.format(crypto_dev_id, driver), "# ", 10)
+ for line in crypto_list:
+ cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(
+ line, line.replace(":", "\:"))
+ test_case.dut.send_expect(cmd, "# ", 10)
+ cmd = "echo 0000:{} > /sys/bus/pci/drivers/{}/bind".format(
+ line, driver)
+ test_case.dut.send_expect(cmd, "# ", 10)
+
+
+def clear_dpdk_config(test_case):
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/' config/common_base", "# ")
+
+
+default_eal_opts = {
+ "c": None,
+ "l": None,
+ "w": None,
+ "vdev": None,
+ "socket-mem": "512,512",
+ "n": "4"
+}
+
+
+def get_eal_opt_str(test_case, override_eal_opts={}):
+ return get_opt_str(test_case, default_eal_opts, override_eal_opts)
+
+
+def get_opt_str(test_case, default_opts, override_opts={}):
+ opts = default_opts.copy()
+
+ # Update options with test suite/case config file
+ for key in opts.keys():
+ if key in test_case.get_case_cfg():
+ opts[key] = test_case.get_case_cfg()[key]
+
+ # Update options with func input
+ opts.update(override_opts)
+
+ # Generate option string
+ opt_str = ""
+ for key,value in opts.items():
+ if value is None:
+ continue
+ dash = "-" if len(key) == 1 else "--"
+ opt_str = opt_str + "{0}{1} {2} ".format(dash, key, value)
+
+ return opt_str
+
+
+def get_dpdk_app_cmd_str(app_path, eal_opt_str, app_opt_str=None):
+ if not app_opt_str:
+ return "{0} {1}".format(app_path, eal_opt_str)
+ return "{0} {1} -- {2}".format(app_path, eal_opt_str, app_opt_str)
+
+
+def is_test_skip(test_case):
+ if "test_skip" in test_case.get_case_cfg() \
+ and test_case.get_case_cfg()["test_skip"] == "Y":
+ test_case.logger.info("Test Skip is YES")
+ return True
+
+
+def is_build_skip(test_case):
+ if "build_skip" in test_case.get_suite_cfg() \
+ and test_case.get_suite_cfg()["build_skip"] == "Y":
+ test_case.logger.info("Build Skip is YES")
+ return True
diff --git a/tests/TestSuite_cryptodev_func_unit-test.py b/tests/TestSuite_cryptodev_func_unit-test.py
new file mode 100644
index 0000000..20aa81a
--- /dev/null
+++ b/tests/TestSuite_cryptodev_func_unit-test.py
@@ -0,0 +1,137 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import json
+
+from test_case import TestCase
+
+import TestSuite_cryptodev_common as cc
+
+
+class UnitTestsCryptodev(TestCase):
+
+ def set_up_all(self):
+ self._app_path = "./{target}/app/test".format(target=self.dut.target)
+ if not cc.is_build_skip(self):
+ cc.build_dpdk_with_cryptodev(self)
+ cc.bind_qat_device(self)
+
+ def set_up(self):
+ pass
+
+ def tear_down(self):
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ cc.clear_dpdk_config(self)
+
+ def test_cryptodev_qat_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_autotest", eal_opt_str)
+
+ def _test_cryptodev_qat_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_perftest", eal_opt_str)
+
+ def _test_cryptodev_qat_continual_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_continual_perftest", eal_opt_str)
+
+ def _test_cryptodev_qat_snow3g_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_snow3g_perftest", eal_opt_str)
+
+ def test_cryptodev_aesni_mb_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_mb_autotest", eal_opt_str)
+
+ def _test_cryptodev_aesni_mb_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_mb_perftest", eal_opt_str)
+
+ def test_cryptodev_aesni_gcm_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_gcm_autotest", eal_opt_str)
+
+ def _test_cryptodev_aesni_gcm_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_gcm_perftest", eal_opt_str)
+
+ def test_cryptodev_sw_snow3g_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_snow3g_autotest", eal_opt_str)
+
+ def _test_cryptodev_sw_snow3g_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_snow3g_perftest", eal_opt_str)
+
+ def test_cryptodev_sw_kasumi_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_kasumi_autotest", eal_opt_str)
+
+ def test_cryptodev_sw_zuc_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_zuc_autotest", eal_opt_str)
+
+ def test_cryptodev_null_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_null_autotest", eal_opt_str)
+
+ def test_cryptodev_openssl_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_openssl_autotest", eal_opt_str)
+
+ def _test_cryptodev_openssl_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_openssl_perftest", eal_opt_str)
+
+ def test_cryptodev_scheduler_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_scheduler_autotest", eal_opt_str)
+
+ def __run_unit_test(self, testsuite, eal_opt_str, timeout=600):
+ self.logger.info("STEP_TEST: " + testsuite)
+ self.dut.send_expect("dmesg -C", "# ", 30)
+ cmd_str = cc.get_dpdk_app_cmd_str(self._app_path, eal_opt_str)
+ self.dut.send_expect(cmd_str, "RTE>>", 30)
+
+ out = ""
+ try:
+ out = self.dut.send_expect(testsuite, "RTE>>", timeout)
+ self.dut.send_expect("quit", "# ", 30)
+ except Exception, ex:
+ self.logger.error("Cryptodev Unit Tests Exception")
+ dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
+ self.logger.error("dmesg info:")
+ self.logger.error(dmesg)
+
+ self.logger.info(out)
+ self.verify("Test OK" in out, "Test Failed")
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests: add the suite of cryptodev unit-test
2019-01-16 6:10 [dts] [PATCH V1] tests: add the suite of cryptodev unit-test Xinfeng Zhao
@ 2019-01-17 8:43 ` Zhao, XinfengX
2019-01-21 2:53 ` Chen, Zhaoyan
2019-01-21 3:33 ` Tu, Lijuan
1 sibling, 1 reply; 4+ messages in thread
From: Zhao, XinfengX @ 2019-01-17 8:43 UTC (permalink / raw)
To: dts; +Cc: Zhao, XinfengX
Tested-by : Xinfeng Zhao <xinfengx.zhao@intel.com>
-----Original Message-----
From: Zhao, XinfengX
Sent: Wednesday, January 16, 2019 2:10 PM
To: dts@dpdk.org
Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
Subject: [dts][PATCH V1] tests: add the suite of cryptodev unit-test
add the methods of cryptodev common and the suite of cryptodev unit-test
Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
---
tests/TestSuite_cryptodev_common.py | 170 ++++++++++++++++++++++++++++
tests/TestSuite_cryptodev_func_unit-test.py | 137 ++++++++++++++++++++++
2 files changed, 307 insertions(+)
create mode 100644 tests/TestSuite_cryptodev_common.py
create mode 100644 tests/TestSuite_cryptodev_func_unit-test.py
diff --git a/tests/TestSuite_cryptodev_common.py b/tests/TestSuite_cryptodev_common.py
new file mode 100644
index 0000000..4cb8ec0
--- /dev/null
+++ b/tests/TestSuite_cryptodev_common.py
@@ -0,0 +1,170 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+def build_dpdk_with_cryptodev(test_case):
+ # Rebuild the dpdk with cryptodev pmds
+ snow3g_lib_path = "/root/libsso_snow3g/snow3g/"
+ if "snow3g_lib_path" in test_case.get_suite_cfg():
+ snow3g_lib_path = test_case.get_suite_cfg()["snow3g_lib_path"]
+
+ zuc_lib_path = "/root/libsso_zuc.1.0.1.1-8/zuc"
+ if "zuc_lib_path" in test_case.get_suite_cfg():
+ zuc_lib_path = test_case.get_suite_cfg()["zuc_lib_path"]
+
+ kasumi_lib_path = "/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/"
+ if "kasumi_lib_path" in test_case.get_suite_cfg():
+ kasumi_lib_path = test_case.get_suite_cfg()["kasumi_lib_path"]
+
+ test_case.dut.send_expect(
+ "export LIBSSO_SNOW3G_PATH={}".format(snow3g_lib_path), "#")
+ test_case.dut.send_expect(
+ "export LIBSSO_ZUC_PATH={}".format(zuc_lib_path), "#")
+ test_case.dut.send_expect(
+ "export LIBSSO_KASUMI_PATH={}".format(kasumi_lib_path), "#")
+
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i
+ 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
+ config/common_base", "# ")
+
+ test_case.dut.skip_setup = False
+ test_case.dut.build_install_dpdk(test_case.dut.target)
+
+
+def bind_qat_device(test_case, driver = "igb_uio"):
+ if not driver:
+ test_case.logger.error("Please configure the driver of qat device to bind")
+ if driver == 'vfio-pci':
+ test_case.dut.send_expect('modprobe vfio-pci', '#', 10)
+
+ if "crypto_dev_id" in test_case.get_suite_cfg():
+ crypto_dev_id = test_case.get_suite_cfg()["crypto_dev_id"]
+ else:
+ crypto_dev_id = "443"
+ test_case.logger.info("crypto device id: " + crypto_dev_id)
+
+ # Bind QAT VF devices
+ out = test_case.dut.send_expect("lspci -d:{}|awk '{{print $1}}'".format(crypto_dev_id), "# ", 10)
+ crypto_list = out.replace("\r", "\n").replace("\n\n", "\n").split("\n")
+ test_case._crypto_pci = crypto_list[0]
+ test_case.dut.send_expect(
+ 'echo "8086 {}" > /sys/bus/pci/drivers/{}/new_id'.format(crypto_dev_id, driver), "# ", 10)
+ for line in crypto_list:
+ cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(
+ line, line.replace(":", "\:"))
+ test_case.dut.send_expect(cmd, "# ", 10)
+ cmd = "echo 0000:{} > /sys/bus/pci/drivers/{}/bind".format(
+ line, driver)
+ test_case.dut.send_expect(cmd, "# ", 10)
+
+
+def clear_dpdk_config(test_case):
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i
+'s/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
+config/common_base", "# ")
+
+
+default_eal_opts = {
+ "c": None,
+ "l": None,
+ "w": None,
+ "vdev": None,
+ "socket-mem": "512,512",
+ "n": "4"
+}
+
+
+def get_eal_opt_str(test_case, override_eal_opts={}):
+ return get_opt_str(test_case, default_eal_opts, override_eal_opts)
+
+
+def get_opt_str(test_case, default_opts, override_opts={}):
+ opts = default_opts.copy()
+
+ # Update options with test suite/case config file
+ for key in opts.keys():
+ if key in test_case.get_case_cfg():
+ opts[key] = test_case.get_case_cfg()[key]
+
+ # Update options with func input
+ opts.update(override_opts)
+
+ # Generate option string
+ opt_str = ""
+ for key,value in opts.items():
+ if value is None:
+ continue
+ dash = "-" if len(key) == 1 else "--"
+ opt_str = opt_str + "{0}{1} {2} ".format(dash, key, value)
+
+ return opt_str
+
+
+def get_dpdk_app_cmd_str(app_path, eal_opt_str, app_opt_str=None):
+ if not app_opt_str:
+ return "{0} {1}".format(app_path, eal_opt_str)
+ return "{0} {1} -- {2}".format(app_path, eal_opt_str, app_opt_str)
+
+
+def is_test_skip(test_case):
+ if "test_skip" in test_case.get_case_cfg() \
+ and test_case.get_case_cfg()["test_skip"] == "Y":
+ test_case.logger.info("Test Skip is YES")
+ return True
+
+
+def is_build_skip(test_case):
+ if "build_skip" in test_case.get_suite_cfg() \
+ and test_case.get_suite_cfg()["build_skip"] == "Y":
+ test_case.logger.info("Build Skip is YES")
+ return True
diff --git a/tests/TestSuite_cryptodev_func_unit-test.py b/tests/TestSuite_cryptodev_func_unit-test.py
new file mode 100644
index 0000000..20aa81a
--- /dev/null
+++ b/tests/TestSuite_cryptodev_func_unit-test.py
@@ -0,0 +1,137 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import json
+
+from test_case import TestCase
+
+import TestSuite_cryptodev_common as cc
+
+
+class UnitTestsCryptodev(TestCase):
+
+ def set_up_all(self):
+ self._app_path = "./{target}/app/test".format(target=self.dut.target)
+ if not cc.is_build_skip(self):
+ cc.build_dpdk_with_cryptodev(self)
+ cc.bind_qat_device(self)
+
+ def set_up(self):
+ pass
+
+ def tear_down(self):
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ cc.clear_dpdk_config(self)
+
+ def test_cryptodev_qat_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_autotest", eal_opt_str)
+
+ def _test_cryptodev_qat_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_perftest", eal_opt_str)
+
+ def _test_cryptodev_qat_continual_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_continual_perftest",
+ eal_opt_str)
+
+ def _test_cryptodev_qat_snow3g_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_qat_snow3g_perftest",
+ eal_opt_str)
+
+ def test_cryptodev_aesni_mb_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_mb_autotest",
+ eal_opt_str)
+
+ def _test_cryptodev_aesni_mb_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_mb_perftest",
+ eal_opt_str)
+
+ def test_cryptodev_aesni_gcm_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_gcm_autotest",
+ eal_opt_str)
+
+ def _test_cryptodev_aesni_gcm_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_aesni_gcm_perftest",
+ eal_opt_str)
+
+ def test_cryptodev_sw_snow3g_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_snow3g_autotest",
+ eal_opt_str)
+
+ def _test_cryptodev_sw_snow3g_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_snow3g_perftest",
+ eal_opt_str)
+
+ def test_cryptodev_sw_kasumi_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_kasumi_autotest",
+ eal_opt_str)
+
+ def test_cryptodev_sw_zuc_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_sw_zuc_autotest", eal_opt_str)
+
+ def test_cryptodev_null_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_null_autotest", eal_opt_str)
+
+ def test_cryptodev_openssl_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_openssl_autotest", eal_opt_str)
+
+ def _test_cryptodev_openssl_perftest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_openssl_perftest", eal_opt_str)
+
+ def test_cryptodev_scheduler_autotest(self):
+ eal_opt_str = cc.get_eal_opt_str(self)
+ self.__run_unit_test("cryptodev_scheduler_autotest",
+ eal_opt_str)
+
+ def __run_unit_test(self, testsuite, eal_opt_str, timeout=600):
+ self.logger.info("STEP_TEST: " + testsuite)
+ self.dut.send_expect("dmesg -C", "# ", 30)
+ cmd_str = cc.get_dpdk_app_cmd_str(self._app_path, eal_opt_str)
+ self.dut.send_expect(cmd_str, "RTE>>", 30)
+
+ out = ""
+ try:
+ out = self.dut.send_expect(testsuite, "RTE>>", timeout)
+ self.dut.send_expect("quit", "# ", 30)
+ except Exception, ex:
+ self.logger.error("Cryptodev Unit Tests Exception")
+ dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
+ self.logger.error("dmesg info:")
+ self.logger.error(dmesg)
+
+ self.logger.info(out)
+ self.verify("Test OK" in out, "Test Failed")
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests: add the suite of cryptodev unit-test
2019-01-17 8:43 ` Zhao, XinfengX
@ 2019-01-21 2:53 ` Chen, Zhaoyan
0 siblings, 0 replies; 4+ messages in thread
From: Chen, Zhaoyan @ 2019-01-21 2:53 UTC (permalink / raw)
To: dts; +Cc: Zhao, XinfengX, Chen, Zhaoyan
Acked-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Zhao, XinfengX
> Sent: Thursday, January 17, 2019 4:44 PM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: Re: [dts] [PATCH V1] tests: add the suite of cryptodev unit-test
>
> Tested-by : Xinfeng Zhao <xinfengx.zhao@intel.com>
>
> -----Original Message-----
> From: Zhao, XinfengX
> Sent: Wednesday, January 16, 2019 2:10 PM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts][PATCH V1] tests: add the suite of cryptodev unit-test
>
> add the methods of cryptodev common and the suite of cryptodev unit-test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> tests/TestSuite_cryptodev_common.py | 170
> ++++++++++++++++++++++++++++
> tests/TestSuite_cryptodev_func_unit-test.py | 137 ++++++++++++++++++++++
> 2 files changed, 307 insertions(+)
> create mode 100644 tests/TestSuite_cryptodev_common.py
> create mode 100644 tests/TestSuite_cryptodev_func_unit-test.py
>
> diff --git a/tests/TestSuite_cryptodev_common.py
> b/tests/TestSuite_cryptodev_common.py
> new file mode 100644
> index 0000000..4cb8ec0
> --- /dev/null
> +++ b/tests/TestSuite_cryptodev_common.py
> @@ -0,0 +1,170 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +def build_dpdk_with_cryptodev(test_case):
> + # Rebuild the dpdk with cryptodev pmds
> + snow3g_lib_path = "/root/libsso_snow3g/snow3g/"
> + if "snow3g_lib_path" in test_case.get_suite_cfg():
> + snow3g_lib_path = test_case.get_suite_cfg()["snow3g_lib_path"]
> +
> + zuc_lib_path = "/root/libsso_zuc.1.0.1.1-8/zuc"
> + if "zuc_lib_path" in test_case.get_suite_cfg():
> + zuc_lib_path = test_case.get_suite_cfg()["zuc_lib_path"]
> +
> + kasumi_lib_path = "/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/"
> + if "kasumi_lib_path" in test_case.get_suite_cfg():
> + kasumi_lib_path = test_case.get_suite_cfg()["kasumi_lib_path"]
> +
> + test_case.dut.send_expect(
> + "export LIBSSO_SNOW3G_PATH={}".format(snow3g_lib_path), "#")
> + test_case.dut.send_expect(
> + "export LIBSSO_ZUC_PATH={}".format(zuc_lib_path), "#")
> + test_case.dut.send_expect(
> + "export LIBSSO_KASUMI_PATH={}".format(kasumi_lib_path), "#")
> +
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=
> y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB
> =y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y
> /' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_G
> CM=y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y
> /' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/'
> config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> + 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> + config/common_base", "# ")
> +
> + test_case.dut.skip_setup = False
> + test_case.dut.build_install_dpdk(test_case.dut.target)
> +
> +
> +def bind_qat_device(test_case, driver = "igb_uio"):
> + if not driver:
> + test_case.logger.error("Please configure the driver of qat device to bind")
> + if driver == 'vfio-pci':
> + test_case.dut.send_expect('modprobe vfio-pci', '#', 10)
> +
> + if "crypto_dev_id" in test_case.get_suite_cfg():
> + crypto_dev_id = test_case.get_suite_cfg()["crypto_dev_id"]
> + else:
> + crypto_dev_id = "443"
> + test_case.logger.info("crypto device id: " + crypto_dev_id)
> +
> + # Bind QAT VF devices
> + out = test_case.dut.send_expect("lspci -d:{}|awk '{{print
> $1}}'".format(crypto_dev_id), "# ", 10)
> + crypto_list = out.replace("\r", "\n").replace("\n\n", "\n").split("\n")
> + test_case._crypto_pci = crypto_list[0]
> + test_case.dut.send_expect(
> + 'echo "8086 {}" > /sys/bus/pci/drivers/{}/new_id'.format(crypto_dev_id,
> driver), "# ", 10)
> + for line in crypto_list:
> + cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(
> + line, line.replace(":", "\:"))
> + test_case.dut.send_expect(cmd, "# ", 10)
> + cmd = "echo 0000:{} > /sys/bus/pci/drivers/{}/bind".format(
> + line, driver)
> + test_case.dut.send_expect(cmd, "# ", 10)
> +
> +
> +def clear_dpdk_config(test_case):
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=
> n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB
> =n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
> /' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_G
> CM=n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
> /' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/'
> config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> +'s/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> +config/common_base", "# ")
> +
> +
> +default_eal_opts = {
> + "c": None,
> + "l": None,
> + "w": None,
> + "vdev": None,
> + "socket-mem": "512,512",
> + "n": "4"
> +}
> +
> +
> +def get_eal_opt_str(test_case, override_eal_opts={}):
> + return get_opt_str(test_case, default_eal_opts, override_eal_opts)
> +
> +
> +def get_opt_str(test_case, default_opts, override_opts={}):
> + opts = default_opts.copy()
> +
> + # Update options with test suite/case config file
> + for key in opts.keys():
> + if key in test_case.get_case_cfg():
> + opts[key] = test_case.get_case_cfg()[key]
> +
> + # Update options with func input
> + opts.update(override_opts)
> +
> + # Generate option string
> + opt_str = ""
> + for key,value in opts.items():
> + if value is None:
> + continue
> + dash = "-" if len(key) == 1 else "--"
> + opt_str = opt_str + "{0}{1} {2} ".format(dash, key, value)
> +
> + return opt_str
> +
> +
> +def get_dpdk_app_cmd_str(app_path, eal_opt_str, app_opt_str=None):
> + if not app_opt_str:
> + return "{0} {1}".format(app_path, eal_opt_str)
> + return "{0} {1} -- {2}".format(app_path, eal_opt_str, app_opt_str)
> +
> +
> +def is_test_skip(test_case):
> + if "test_skip" in test_case.get_case_cfg() \
> + and test_case.get_case_cfg()["test_skip"] == "Y":
> + test_case.logger.info("Test Skip is YES")
> + return True
> +
> +
> +def is_build_skip(test_case):
> + if "build_skip" in test_case.get_suite_cfg() \
> + and test_case.get_suite_cfg()["build_skip"] == "Y":
> + test_case.logger.info("Build Skip is YES")
> + return True
> diff --git a/tests/TestSuite_cryptodev_func_unit-test.py
> b/tests/TestSuite_cryptodev_func_unit-test.py
> new file mode 100644
> index 0000000..20aa81a
> --- /dev/null
> +++ b/tests/TestSuite_cryptodev_func_unit-test.py
> @@ -0,0 +1,137 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import json
> +
> +from test_case import TestCase
> +
> +import TestSuite_cryptodev_common as cc
> +
> +
> +class UnitTestsCryptodev(TestCase):
> +
> + def set_up_all(self):
> + self._app_path = "./{target}/app/test".format(target=self.dut.target)
> + if not cc.is_build_skip(self):
> + cc.build_dpdk_with_cryptodev(self)
> + cc.bind_qat_device(self)
> +
> + def set_up(self):
> + pass
> +
> + def tear_down(self):
> + self.dut.kill_all()
> +
> + def tear_down_all(self):
> + cc.clear_dpdk_config(self)
> +
> + def test_cryptodev_qat_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_autotest", eal_opt_str)
> +
> + def _test_cryptodev_qat_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_perftest", eal_opt_str)
> +
> + def _test_cryptodev_qat_continual_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_continual_perftest",
> + eal_opt_str)
> +
> + def _test_cryptodev_qat_snow3g_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_snow3g_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_aesni_mb_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_mb_autotest",
> + eal_opt_str)
> +
> + def _test_cryptodev_aesni_mb_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_mb_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_aesni_gcm_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_gcm_autotest",
> + eal_opt_str)
> +
> + def _test_cryptodev_aesni_gcm_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_gcm_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_sw_snow3g_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_snow3g_autotest",
> + eal_opt_str)
> +
> + def _test_cryptodev_sw_snow3g_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_snow3g_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_sw_kasumi_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_kasumi_autotest",
> + eal_opt_str)
> +
> + def test_cryptodev_sw_zuc_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_zuc_autotest", eal_opt_str)
> +
> + def test_cryptodev_null_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_null_autotest", eal_opt_str)
> +
> + def test_cryptodev_openssl_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_openssl_autotest", eal_opt_str)
> +
> + def _test_cryptodev_openssl_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_openssl_perftest", eal_opt_str)
> +
> + def test_cryptodev_scheduler_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_scheduler_autotest",
> + eal_opt_str)
> +
> + def __run_unit_test(self, testsuite, eal_opt_str, timeout=600):
> + self.logger.info("STEP_TEST: " + testsuite)
> + self.dut.send_expect("dmesg -C", "# ", 30)
> + cmd_str = cc.get_dpdk_app_cmd_str(self._app_path, eal_opt_str)
> + self.dut.send_expect(cmd_str, "RTE>>", 30)
> +
> + out = ""
> + try:
> + out = self.dut.send_expect(testsuite, "RTE>>", timeout)
> + self.dut.send_expect("quit", "# ", 30)
> + except Exception, ex:
> + self.logger.error("Cryptodev Unit Tests Exception")
> + dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
> + self.logger.error("dmesg info:")
> + self.logger.error(dmesg)
> +
> + self.logger.info(out)
> + self.verify("Test OK" in out, "Test Failed")
> --
> 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests: add the suite of cryptodev unit-test
2019-01-16 6:10 [dts] [PATCH V1] tests: add the suite of cryptodev unit-test Xinfeng Zhao
2019-01-17 8:43 ` Zhao, XinfengX
@ 2019-01-21 3:33 ` Tu, Lijuan
1 sibling, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2019-01-21 3:33 UTC (permalink / raw)
To: Zhao, XinfengX, dts; +Cc: Zhao, XinfengX
Could you please kindly fix these warning?
Applying: tests: add the suite of cryptodev unit-test
.git/rebase-apply/patch:260: trailing whitespace.
thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Wednesday, January 16, 2019 2:10 PM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V1] tests: add the suite of cryptodev unit-test
>
> add the methods of cryptodev common and the suite of cryptodev unit-test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> tests/TestSuite_cryptodev_common.py | 170
> ++++++++++++++++++++++++++++
> tests/TestSuite_cryptodev_func_unit-test.py | 137 ++++++++++++++++++++++
> 2 files changed, 307 insertions(+)
> create mode 100644 tests/TestSuite_cryptodev_common.py
> create mode 100644 tests/TestSuite_cryptodev_func_unit-test.py
>
> diff --git a/tests/TestSuite_cryptodev_common.py
> b/tests/TestSuite_cryptodev_common.py
> new file mode 100644
> index 0000000..4cb8ec0
> --- /dev/null
> +++ b/tests/TestSuite_cryptodev_common.py
> @@ -0,0 +1,170 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +def build_dpdk_with_cryptodev(test_case):
> + # Rebuild the dpdk with cryptodev pmds
> + snow3g_lib_path = "/root/libsso_snow3g/snow3g/"
> + if "snow3g_lib_path" in test_case.get_suite_cfg():
> + snow3g_lib_path = test_case.get_suite_cfg()["snow3g_lib_path"]
> +
> + zuc_lib_path = "/root/libsso_zuc.1.0.1.1-8/zuc"
> + if "zuc_lib_path" in test_case.get_suite_cfg():
> + zuc_lib_path = test_case.get_suite_cfg()["zuc_lib_path"]
> +
> + kasumi_lib_path = "/root/LibSSO_0_3_1/isg_cid-
> wireless_libs/ciphers/kasumi/"
> + if "kasumi_lib_path" in test_case.get_suite_cfg():
> + kasumi_lib_path = test_case.get_suite_cfg()["kasumi_lib_path"]
> +
> + test_case.dut.send_expect(
> + "export LIBSSO_SNOW3G_PATH={}".format(snow3g_lib_path), "#")
> + test_case.dut.send_expect(
> + "export LIBSSO_ZUC_PATH={}".format(zuc_lib_path), "#")
> + test_case.dut.send_expect(
> + "export LIBSSO_KASUMI_PATH={}".format(kasumi_lib_path), "#")
> +
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n$/CONFIG_RTE_LIBRTE_PMD_QAT_S
> YM=y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESN
> I_MB=y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENS
> SL=y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AES
> NI_GCM=y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW
> 3G=y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI
> =y/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> + 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> + config/common_base", "# ")
> +
> + test_case.dut.skip_setup = False
> + test_case.dut.build_install_dpdk(test_case.dut.target)
> +
> +
> +def bind_qat_device(test_case, driver = "igb_uio"):
> + if not driver:
> + test_case.logger.error("Please configure the driver of qat device to bind")
> + if driver == 'vfio-pci':
> + test_case.dut.send_expect('modprobe vfio-pci', '#', 10)
> +
> + if "crypto_dev_id" in test_case.get_suite_cfg():
> + crypto_dev_id = test_case.get_suite_cfg()["crypto_dev_id"]
> + else:
> + crypto_dev_id = "443"
> + test_case.logger.info("crypto device id: " + crypto_dev_id)
> +
> + # Bind QAT VF devices
> + out = test_case.dut.send_expect("lspci -d:{}|awk '{{print
> $1}}'".format(crypto_dev_id), "# ", 10)
> + crypto_list = out.replace("\r", "\n").replace("\n\n", "\n").split("\n")
> + test_case._crypto_pci = crypto_list[0]
> + test_case.dut.send_expect(
> + 'echo "8086 {}" > /sys/bus/pci/drivers/{}/new_id'.format(crypto_dev_id,
> driver), "# ", 10)
> + for line in crypto_list:
> + cmd = "echo 0000:{} >
> /sys/bus/pci/devices/0000\:{}/driver/unbind".format(
> + line, line.replace(":", "\:"))
> + test_case.dut.send_expect(cmd, "# ", 10)
> + cmd = "echo 0000:{} > /sys/bus/pci/drivers/{}/bind".format(
> + line, driver)
> + test_case.dut.send_expect(cmd, "# ", 10)
> +
> +
> +def clear_dpdk_config(test_case):
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y$/CONFIG_RTE_LIBRTE_PMD_QAT_S
> YM=n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESN
> I_MB=n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENS
> SL=n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AES
> NI_GCM=n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW
> 3G=n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI
> =n/' config/common_base", "# ")
> + test_case.dut.send_expect(
> + "sed -i
> +'s/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> +config/common_base", "# ")
> +
> +
> +default_eal_opts = {
> + "c": None,
> + "l": None,
> + "w": None,
> + "vdev": None,
> + "socket-mem": "512,512",
> + "n": "4"
> +}
> +
> +
> +def get_eal_opt_str(test_case, override_eal_opts={}):
> + return get_opt_str(test_case, default_eal_opts, override_eal_opts)
> +
> +
> +def get_opt_str(test_case, default_opts, override_opts={}):
> + opts = default_opts.copy()
> +
> + # Update options with test suite/case config file
> + for key in opts.keys():
> + if key in test_case.get_case_cfg():
> + opts[key] = test_case.get_case_cfg()[key]
> +
> + # Update options with func input
> + opts.update(override_opts)
> +
> + # Generate option string
> + opt_str = ""
> + for key,value in opts.items():
> + if value is None:
> + continue
> + dash = "-" if len(key) == 1 else "--"
> + opt_str = opt_str + "{0}{1} {2} ".format(dash, key, value)
> +
> + return opt_str
> +
> +
> +def get_dpdk_app_cmd_str(app_path, eal_opt_str, app_opt_str=None):
> + if not app_opt_str:
> + return "{0} {1}".format(app_path, eal_opt_str)
> + return "{0} {1} -- {2}".format(app_path, eal_opt_str, app_opt_str)
> +
> +
> +def is_test_skip(test_case):
> + if "test_skip" in test_case.get_case_cfg() \
> + and test_case.get_case_cfg()["test_skip"] == "Y":
> + test_case.logger.info("Test Skip is YES")
> + return True
> +
> +
> +def is_build_skip(test_case):
> + if "build_skip" in test_case.get_suite_cfg() \
> + and test_case.get_suite_cfg()["build_skip"] == "Y":
> + test_case.logger.info("Build Skip is YES")
> + return True
> diff --git a/tests/TestSuite_cryptodev_func_unit-test.py
> b/tests/TestSuite_cryptodev_func_unit-test.py
> new file mode 100644
> index 0000000..20aa81a
> --- /dev/null
> +++ b/tests/TestSuite_cryptodev_func_unit-test.py
> @@ -0,0 +1,137 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import json
> +
> +from test_case import TestCase
> +
> +import TestSuite_cryptodev_common as cc
> +
> +
> +class UnitTestsCryptodev(TestCase):
> +
> + def set_up_all(self):
> + self._app_path = "./{target}/app/test".format(target=self.dut.target)
> + if not cc.is_build_skip(self):
> + cc.build_dpdk_with_cryptodev(self)
> + cc.bind_qat_device(self)
> +
> + def set_up(self):
> + pass
> +
> + def tear_down(self):
> + self.dut.kill_all()
> +
> + def tear_down_all(self):
> + cc.clear_dpdk_config(self)
> +
> + def test_cryptodev_qat_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_autotest", eal_opt_str)
> +
> + def _test_cryptodev_qat_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_perftest", eal_opt_str)
> +
> + def _test_cryptodev_qat_continual_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_continual_perftest",
> + eal_opt_str)
> +
> + def _test_cryptodev_qat_snow3g_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_qat_snow3g_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_aesni_mb_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_mb_autotest",
> + eal_opt_str)
> +
> + def _test_cryptodev_aesni_mb_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_mb_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_aesni_gcm_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_gcm_autotest",
> + eal_opt_str)
> +
> + def _test_cryptodev_aesni_gcm_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_aesni_gcm_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_sw_snow3g_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_snow3g_autotest",
> + eal_opt_str)
> +
> + def _test_cryptodev_sw_snow3g_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_snow3g_perftest",
> + eal_opt_str)
> +
> + def test_cryptodev_sw_kasumi_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_kasumi_autotest",
> + eal_opt_str)
> +
> + def test_cryptodev_sw_zuc_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_sw_zuc_autotest", eal_opt_str)
> +
> + def test_cryptodev_null_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_null_autotest", eal_opt_str)
> +
> + def test_cryptodev_openssl_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_openssl_autotest", eal_opt_str)
> +
> + def _test_cryptodev_openssl_perftest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_openssl_perftest", eal_opt_str)
> +
> + def test_cryptodev_scheduler_autotest(self):
> + eal_opt_str = cc.get_eal_opt_str(self)
> + self.__run_unit_test("cryptodev_scheduler_autotest",
> + eal_opt_str)
> +
> + def __run_unit_test(self, testsuite, eal_opt_str, timeout=600):
> + self.logger.info("STEP_TEST: " + testsuite)
> + self.dut.send_expect("dmesg -C", "# ", 30)
> + cmd_str = cc.get_dpdk_app_cmd_str(self._app_path, eal_opt_str)
> + self.dut.send_expect(cmd_str, "RTE>>", 30)
> +
> + out = ""
> + try:
> + out = self.dut.send_expect(testsuite, "RTE>>", timeout)
> + self.dut.send_expect("quit", "# ", 30)
> + except Exception, ex:
> + self.logger.error("Cryptodev Unit Tests Exception")
> + dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
> + self.logger.error("dmesg info:")
> + self.logger.error(dmesg)
> +
> + self.logger.info(out)
> + self.verify("Test OK" in out, "Test Failed")
> --
> 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-01-21 3:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-16 6:10 [dts] [PATCH V1] tests: add the suite of cryptodev unit-test Xinfeng Zhao
2019-01-17 8:43 ` Zhao, XinfengX
2019-01-21 2:53 ` Chen, Zhaoyan
2019-01-21 3:33 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).