[dts] [PATCH 1/4] test_plans/dual_vlan: fix doc build warning

[dts] [PATCH 1/4] test_plans/dual_vlan: fix doc build warning

[Lijuan Tu]

Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
 test_plans/dual_vlan_test_plan.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/test_plans/dual_vlan_test_plan.rst b/test_plans/dual_vlan_test_plan.rst
index 3defc91..e00d7b3 100644
--- a/test_plans/dual_vlan_test_plan.rst
+++ b/test_plans/dual_vlan_test_plan.rst
@@ -153,7 +153,7 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
  received in port ``B``.
 
 Test Case: Enable/Disable VLAN header stripping
-==============================================
+===============================================
 
 Enable vlan packet forwarding on port ``0`` first::
 
@@ -210,7 +210,7 @@ Configure the traffic generator to send VLAN packets with the Tag Identifier
 Identifier ``1`` can been received in port ``B``.
 
 Test Case: Enable/Disable VLAN header stripping in queue
-=======================================================
+========================================================
 
 Enable vlan packet forwarding on port ``0`` first::
 
-- 
1.8.3.1

[dts] [PATCH 2/4] test_plans/qos_api: fix doc build warning

[Lijuan Tu]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=a, Size: 1226 bytes --]

Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
 test_plans/qos_api_test_plan.rst | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/test_plans/qos_api_test_plan.rst b/test_plans/qos_api_test_plan.rst
index f89fdb3..f8a77d4 100644
--- a/test_plans/qos_api_test_plan.rst
+++ b/test_plans/qos_api_test_plan.rst
@@ -40,6 +40,7 @@ The generic API for the Quality of Service (QoS) Traffic Management of Ethernet
 devices, which includes the following main features: hierarchical scheduling,
 traffic shaping, congestion management, packet marking.
 The TM setting commands are as following:
+
 1. Add the port traffic management private shaper profile::
 
     testpmd> add port tm node shaper profile (port_id) (shaper_profile_id) \
@@ -82,7 +83,7 @@ Bind two ports to dpdk driver::
 
     ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1
 
-Test Cases for I40e：
+Test Cases for I40e:
 ====================
 
 Test Case: dcb 4 tc queue mapping
@@ -266,7 +267,7 @@ Test Case: shaping for port
    verify shaping the traffic to 200Mbps(25MBps).
 
 Test Cases for ixgbe:
-====================
+=====================
 
 Test Case: dcb 4 tc queue mapping
 =================================
-- 
1.8.3.1

[dts] [PATCH 3/4] test_plans/vlan_ethertype_config: fix doc build warning

[Lijuan Tu]

Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
 test_plans/vlan_ethertype_config_test_plan.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/test_plans/vlan_ethertype_config_test_plan.rst b/test_plans/vlan_ethertype_config_test_plan.rst
index 81b7d9b..7096614 100644
--- a/test_plans/vlan_ethertype_config_test_plan.rst
+++ b/test_plans/vlan_ethertype_config_test_plan.rst
@@ -124,7 +124,7 @@ Test Case 3: test adding VLAN Tag Identifier with changing VLAN TPID
    Verify that the VLAN packet cannot be received in port ``B``.
 
 Test Case 4: test VLAN header stripping with changing VLAN TPID
-==============================================================
+===============================================================
 
 1. start testpmd, setup vlan filter off, vlan strip on, start in mac forwarding mode::
 
@@ -142,7 +142,7 @@ Test Case 4: test VLAN header stripping with changing VLAN TPID
       testpmd> vlan set outer tpid 0xA100 0
 
 4. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``.
-Verify that packet received in port ``B`` without VLAN Tag Identifier
+  Verify that packet received in port ``B`` without VLAN Tag Identifier
 
 5. Disable vlan header stripping on port ``0``::
 
-- 
1.8.3.1

[dts] [PATCH 4/4] test_plans/loopback_multi_paths_port_restart_performance: fix doc build warning

[Lijuan Tu]

Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
 test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
index 5783ba0..dae7ea2 100644
--- a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
@@ -81,7 +81,7 @@ Test Case 1: vhost/virtio-user loopback test with Virtio 1.1 mergeable path
 
 
 Test Case 2: vhost/virtio-user loopback test with Virtio 1.1 no-mergeable path
-===========================================================================
+==============================================================================
 
 1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
 
-- 
1.8.3.1

Re: [dts] [PATCH 1/4] test_plans/dual_vlan: fix doc build warning

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: Tu, Lijuan
> Sent: Thursday, January 31, 2019 9:05 PM
> To: dts@dpdk.org
> Cc: Tu, Lijuan <lijuan.tu@intel.com>
> Subject: [PATCH 1/4] test_plans/dual_vlan: fix doc build warning
> 
> Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
> ---
>  test_plans/dual_vlan_test_plan.rst | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/test_plans/dual_vlan_test_plan.rst
> b/test_plans/dual_vlan_test_plan.rst
> index 3defc91..e00d7b3 100644
> --- a/test_plans/dual_vlan_test_plan.rst
> +++ b/test_plans/dual_vlan_test_plan.rst
> @@ -153,7 +153,7 @@ Configure the traffic generator to send VLAN packets
> with the Tag Identifier
>   received in port ``B``.
> 
>  Test Case: Enable/Disable VLAN header stripping -
> ==============================================
> +===============================================
> 
>  Enable vlan packet forwarding on port ``0`` first::
> 
> @@ -210,7 +210,7 @@ Configure the traffic generator to send VLAN packets
> with the Tag Identifier  Identifier ``1`` can been received in port ``B``.
> 
>  Test Case: Enable/Disable VLAN header stripping in queue -
> =======================================================
> +========================================================
> 
>  Enable vlan packet forwarding on port ``0`` first::
> 
> --
> 1.8.3.1

Re: [dts] [PATCH 2/4] test_plans/qos_api: fix doc build warning

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: Tu, Lijuan
> Sent: Thursday, January 31, 2019 9:05 PM
> To: dts@dpdk.org
> Cc: Tu, Lijuan <lijuan.tu@intel.com>
> Subject: [PATCH 2/4] test_plans/qos_api: fix doc build warning
> 
> Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
> ---
>  test_plans/qos_api_test_plan.rst | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/test_plans/qos_api_test_plan.rst b/test_plans/qos_api_test_plan.rst
> index f89fdb3..f8a77d4 100644
> --- a/test_plans/qos_api_test_plan.rst
> +++ b/test_plans/qos_api_test_plan.rst
> @@ -40,6 +40,7 @@ The generic API for the Quality of Service (QoS) Traffic
> Management of Ethernet  devices, which includes the following main features:
> hierarchical scheduling,  traffic shaping, congestion management, packet
> marking.
>  The TM setting commands are as following:
> +
>  1. Add the port traffic management private shaper profile::
> 
>      testpmd> add port tm node shaper profile (port_id) (shaper_profile_id) \ @@
> -82,7 +83,7 @@ Bind two ports to dpdk driver::
> 
>      ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1
> 
> -Test Cases for I40e：
> +Test Cases for I40e:
>  ====================
> 
>  Test Case: dcb 4 tc queue mapping
> @@ -266,7 +267,7 @@ Test Case: shaping for port
>     verify shaping the traffic to 200Mbps(25MBps).
> 
>  Test Cases for ixgbe:
> -====================
> +=====================
> 
>  Test Case: dcb 4 tc queue mapping
>  =================================
> --
> 1.8.3.1

Re: [dts] [PATCH 3/4] test_plans/vlan_ethertype_config: fix doc build warning

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: Tu, Lijuan
> Sent: Thursday, January 31, 2019 9:05 PM
> To: dts@dpdk.org
> Cc: Tu, Lijuan <lijuan.tu@intel.com>
> Subject: [PATCH 3/4] test_plans/vlan_ethertype_config: fix doc build warning
> 
> Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
> ---
>  test_plans/vlan_ethertype_config_test_plan.rst | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/test_plans/vlan_ethertype_config_test_plan.rst
> b/test_plans/vlan_ethertype_config_test_plan.rst
> index 81b7d9b..7096614 100644
> --- a/test_plans/vlan_ethertype_config_test_plan.rst
> +++ b/test_plans/vlan_ethertype_config_test_plan.rst
> @@ -124,7 +124,7 @@ Test Case 3: test adding VLAN Tag Identifier with
> changing VLAN TPID
>     Verify that the VLAN packet cannot be received in port ``B``.
> 
>  Test Case 4: test VLAN header stripping with changing VLAN TPID -
> ==============================================================
> +===============================================================
> 
>  1. start testpmd, setup vlan filter off, vlan strip on, start in mac forwarding
> mode::
> 
> @@ -142,7 +142,7 @@ Test Case 4: test VLAN header stripping with changing
> VLAN TPID
>        testpmd> vlan set outer tpid 0xA100 0
> 
>  4. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``.
> -Verify that packet received in port ``B`` without VLAN Tag Identifier
> +  Verify that packet received in port ``B`` without VLAN Tag Identifier
> 
>  5. Disable vlan header stripping on port ``0``::
> 
> --
> 1.8.3.1

Re: [dts] [PATCH 4/4] test_plans/loopback_multi_paths_port_restart_performance: fix doc build warning

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: Tu, Lijuan
> Sent: Thursday, January 31, 2019 9:05 PM
> To: dts@dpdk.org
> Cc: Tu, Lijuan <lijuan.tu@intel.com>
> Subject: [PATCH 4/4]
> test_plans/loopback_multi_paths_port_restart_performance: fix doc build
> warning
> 
> Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
> ---
>  test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst | 2
> +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git
> a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
> b/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
> index 5783ba0..dae7ea2 100644
> --- a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
> +++ b/test_plans/loopback_multi_paths_port_restart_performance_test_plan
> +++ .rst
> @@ -81,7 +81,7 @@ Test Case 1: vhost/virtio-user loopback test with Virtio 1.1
> mergeable path
> 
> 
>  Test Case 2: vhost/virtio-user loopback test with Virtio 1.1 no-mergeable path -
> =================================================================
> ==========
> +================================================================
> =======
> +=======
> 
>  1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> 
> --
> 1.8.3.1