* [dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency
@ 2019-01-28 2:34 Yinan
2019-02-13 6:25 ` Yao, Lei A
2019-02-26 7:56 ` Tu, Lijuan
0 siblings, 2 replies; 3+ messages in thread
From: Yinan @ 2019-01-28 2:34 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...host_single_core_performance_test_plan.rst | 211 ++++++++++++++++++
1 file changed, 211 insertions(+)
create mode 100644 test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
diff --git a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
new file mode 100644
index 0000000..eff73f5
--- /dev/null
+++ b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
@@ -0,0 +1,211 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=====================================
+PVP multi-paths vhost single core Tests
+=====================================
+
+Description
+===========
+
+Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
+Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
+no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
+For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io fwd at virtio side to lower the virtio workload.
+
+Test Case 1: vhost single core performance test with Virtio 1.1 mergeable path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 2: vhost single core performance test with Virtio 1.1 no-mergeable path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 3: vhost single core performance test with Inorder mergeable path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 4: vhost single core performance test with Inorder no-mergeable path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 5: vhost single core performance test with Mergeable path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 6: vhost single core performance test with Normal path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 7: vhost single core performance test with Vector_RX path
+=======================================================================
+
+flow:
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency
2019-01-28 2:34 [dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency Yinan
@ 2019-02-13 6:25 ` Yao, Lei A
2019-02-26 7:56 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Yao, Lei A @ 2019-02-13 6:25 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, January 28, 2019 10:35 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH 2/3]
> test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan
> of PVP multi-paths for vhost max efficiency
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
Acked-by: Lei Yao <lei.a.yao@intel.com>
> ---
> ...host_single_core_performance_test_plan.rst | 211
> ++++++++++++++++++
> 1 file changed, 211 insertions(+)
> create mode 100644
> test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
>
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.r
> st
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.
> rst
> new file mode 100644
> index 0000000..eff73f5
> --- /dev/null
> +++
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.
> rst
> @@ -0,0 +1,211 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP multi-paths vhost single core Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
> +no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io
> fwd at virtio side to lower the virtio workload.
> +
> +Test Case 1: vhost single core performance test with Virtio 1.1 mergeable
> path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 2: vhost single core performance test with Virtio 1.1 no-
> mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 3: vhost single core performance test with Inorder mergeable
> path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 4: vhost single core performance test with Inorder no-mergeable
> path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 5: vhost single core performance test with Mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 6: vhost single core performance test with Normal path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 7: vhost single core performance test with Vector_RX path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency
2019-01-28 2:34 [dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency Yinan
2019-02-13 6:25 ` Yao, Lei A
@ 2019-02-26 7:56 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2019-02-26 7:56 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, January 28, 2019 10:35 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH 2/3]
> test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of
> PVP multi-paths for vhost max efficiency
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...host_single_core_performance_test_plan.rst | 211 ++++++++++++++++++
> 1 file changed, 211 insertions(+)
> create mode 100644
> test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
>
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
> new file mode 100644
> index 0000000..eff73f5
> --- /dev/null
> +++ b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan
> +++ .rst
> @@ -0,0 +1,211 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP multi-paths vhost single core Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
> +no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io
> fwd at virtio side to lower the virtio workload.
> +
> +Test Case 1: vhost single core performance test with Virtio 1.1
> +mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024
> --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 2: vhost single core performance test with Virtio 1.1
> +no-mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024
> --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 3: vhost single core performance test with Inorder mergeable
> +path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024
> --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 4: vhost single core performance test with Inorder
> +no-mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024
> --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 5: vhost single core performance test with Mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024
> --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 6: vhost single core performance test with Normal path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024
> --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 7: vhost single core performance test with Vector_RX path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-26 7:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-28 2:34 [dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency Yinan
2019-02-13 6:25 ` Yao, Lei A
2019-02-26 7:56 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).