* [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
@ 2019-02-27 0:52 Yinan
2019-02-28 11:11 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-02-27 0:52 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
pvp_qemu_multi_paths_port_restart_test_plan.rst
---
...emu_multi_paths_port_restart_test_plan.rst | 315 ++++++++++++++++++
1 file changed, 315 insertions(+)
create mode 100644 test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
diff --git a/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
new file mode 100644
index 0000000..7701327
--- /dev/null
+++ b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
@@ -0,0 +1,315 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+Vhost/Virtio qemu multi-paths and port restart Tests
+==========================================
+
+Benchmark pvp qemu test with 3 RX/TX PATHs,includes Mergeable, Normal, Vector_RX.
+Cover virtio 1.0 and virtio 0.95.Also cover port restart test with each path.
+
+
+Test Case: PVP test with virtio 0.95 mergeable path
+======================================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch VM with mrg_rxbuf feature on::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd::
+ ./testpmd -c 0x3 -n 3 -- -i \
+ --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Port restart 100 times by below command and re-calculate the average througnput::
+
+ testpmd>stop
+ testpmd>start
+ ...
+ testpmd>stop
+ testpmd>clear port stats all
+ testpmd>start
+ testpmd>show port stats all
+
+Test Case: PVP test with virtio 0.95 normal path
+======================================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch VM with mrg_rxbuf feature off::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+ -vnc :10
+
+
+3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip \
+ --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+ testpmd>stop
+ testpmd>clear port stats all
+ testpmd>start
+ testpmd>show port stats all
+
+Test Case: PVP test with virtio 0.95 vrctor_rx path
+======================================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch VM with mrg_rxbuf feature off::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without ant tx-offloads::
+ ./testpmd -c 0x3 -n 3 -- -i \
+ --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+ testpmd>stop
+ testpmd>clear port stats all
+ testpmd>start
+ testpmd>show port stats all
+
+Test Case: PVP test with virtio 1.0 mergeable path
+======================================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd ::
+ ./testpmd -c 0x3 -n 3 -- -i \
+ --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+ testpmd>stop
+ testpmd>clear port stats all
+ testpmd>start
+ testpmd>show port stats all
+
+Test Case: PVP test with virtio 1.0 normal path
+======================================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip\
+ --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+ testpmd>stop
+ testpmd>clear port stats all
+ testpmd>start
+ testpmd>show port stats all
+
+Test Case: PVP test with virtio 1.0 vrctor_rx path
+======================================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+ -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+ ./testpmd -c 0x3 -n 3 -- -i \
+ --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+ testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+ testpmd>stop
+ testpmd>clear port stats all
+ testpmd>start
+ testpmd>show port stats all
+
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
2019-02-27 0:52 [dts] [PATCH] test_plans: add test plan for pvp multi-paths test Yinan
@ 2019-02-28 11:11 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-02-28 11:11 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applying: test_plans: add test plan for pvp multi-paths test
.git/rebase-apply/patch:55: trailing whitespace.
flow:
.git/rebase-apply/patch:104: trailing whitespace.
flow:
.git/rebase-apply/patch:128: trailing whitespace.
.git/rebase-apply/patch:150: trailing whitespace.
flow:
.git/rebase-apply/patch:195: trailing whitespace.
flow:
warning: squelched 4 whitespace errors
warning: 9 lines add whitespace errors.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, February 27, 2019 8:52 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> pvp_qemu_multi_paths_port_restart_test_plan.rst
> ---
> ...emu_multi_paths_port_restart_test_plan.rst | 315 ++++++++++++++++++
> 1 file changed, 315 insertions(+)
> create mode 100644
> test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
>
> diff --git a/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> new file mode 100644
> index 0000000..7701327
> --- /dev/null
> +++ b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> @@ -0,0 +1,315 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==========================================
> +Vhost/Virtio qemu multi-paths and port restart Tests
> +==========================================
> +
> +Benchmark pvp qemu test with 3 RX/TX PATHs,includes Mergeable, Normal,
> Vector_RX.
> +Cover virtio 1.0 and virtio 0.95.Also cover port restart test with each path.
> +
> +
> +Test Case: PVP test with virtio 0.95 mergeable path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> + -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch VM with mrg_rxbuf feature on::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> + -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024
> ,tx_queue_size=1024 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd::
> + ./testpmd -c 0x3 -n 3 -- -i \
> + --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Port restart 100 times by below command and re-calculate the average
> througnput::
> +
> + testpmd>stop
> + testpmd>start
> + ...
> + testpmd>stop
> + testpmd>clear port stats all
> + testpmd>start
> + testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 0.95 normal path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> + -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch VM with mrg_rxbuf feature off::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024
> ,tx_queue_size=1024 \
> + -vnc :10
> +
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
> + ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip \
> + --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> + testpmd>stop
> + testpmd>clear port stats all
> + testpmd>start
> + testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 0.95 vrctor_rx path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> + -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch VM with mrg_rxbuf feature off::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024
> ,tx_queue_size=1024 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without ant tx-offloads::
> + ./testpmd -c 0x3 -n 3 -- -i \
> + --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> + testpmd>stop
> + testpmd>clear port stats all
> + testpmd>start
> + testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 1.0 mergeable path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> + -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to
> enable virtio 1.0::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd ::
> + ./testpmd -c 0x3 -n 3 -- -i \
> + --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> + testpmd>stop
> + testpmd>clear port stats all
> + testpmd>start
> + testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 1.0 normal path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> + -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to
> enable virtio 1.0::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
> + ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip\
> + --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> + testpmd>stop
> + testpmd>clear port stats all
> + testpmd>start
> + testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 1.0 vrctor_rx path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> + -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to
> enable virtio 1.0::
> +
> + qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
> + -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> + ./testpmd -c 0x3 -n 3 -- -i \
> + --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> + testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> + testpmd>stop
> + testpmd>clear port stats all
> + testpmd>start
> + testpmd>show port stats all
> +
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-02-28 11:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-27 0:52 [dts] [PATCH] test_plans: add test plan for pvp multi-paths test Yinan
2019-02-28 11:11 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).