* [dts] [PATCH] test_plans/pvp_virtio_user_multi_queues: add test plan for pvp vhost/virtio-user multi-queues test
@ 2019-04-16 1:37 Yinan
2019-04-16 23:27 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-04-16 1:37 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...pvp_virtio_user_multi_queues_test_plan.rst | 286 ++++++++++++++++++
1 file changed, 286 insertions(+)
create mode 100644 test_plans/pvp_virtio_user_multi_queues_test_plan.rst
diff --git a/test_plans/pvp_virtio_user_multi_queues_test_plan.rst b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
new file mode 100644
index 0000000..cb7f345
--- /dev/null
+++ b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
@@ -0,0 +1,286 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===================================================
+vhost/virtio pvp virtio-user multi-queues test plan
+===================================================
+
+Description
+===========
+
+Benchmark pvp virtio-user multi-queues test with 8 tx/rx paths.
+Includes mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: pvp 2 queues test with virtio 1.1 mergeable path
+=============================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's rx/tx packet numbers::
+
+ testpmd>stop
+
+Test Case 2: pvp 2 queues test with Virtio 1.1 normal path
+==========================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
+Test Case 3: pvp 2 queues test with inorder mergeable path
+==========================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
+Test Case 4: pvp 2 queues test with inorder no-mergeable path
+=============================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
+Test Case 5: pvp 2 queues test with mergeable path
+==================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
+Test Case 6: pvp 2 queues test with normal path
+===============================================
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
+Test Case 7: pvp 2 queues test with vector_rx path
+==================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
+Test Case 8: pvp 2 queues test with virtio 1.1 inorder path
+===========================================================
+
+flow:
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+ testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+ testpmd>stop
+
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH] test_plans/pvp_virtio_user_multi_queues: add test plan for pvp vhost/virtio-user multi-queues test
2019-04-16 1:37 [dts] [PATCH] test_plans/pvp_virtio_user_multi_queues: add test plan for pvp vhost/virtio-user multi-queues test Yinan
@ 2019-04-16 23:27 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-04-16 23:27 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
.git/rebase-apply/patch:52: trailing whitespace.
Includes mergeable, normal, vector_rx, inorder mergeable,
.git/rebase-apply/patch:147: trailing whitespace.
flow:
.git/rebase-apply/patch:178: trailing whitespace.
flow:
.git/rebase-apply/patch:208: trailing whitespace.
flow:
.git/rebase-apply/patch:239: trailing whitespace.
flow:
warning: squelched 2 whitespace errors
warning: 7 lines add whitespace errors
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, April 15, 2019 6:37 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH] test_plans/pvp_virtio_user_multi_queues: add test
> plan for pvp vhost/virtio-user multi-queues test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...pvp_virtio_user_multi_queues_test_plan.rst | 286 ++++++++++++++++++
> 1 file changed, 286 insertions(+)
> create mode 100644
> test_plans/pvp_virtio_user_multi_queues_test_plan.rst
>
> diff --git a/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> new file mode 100644
> index 0000000..cb7f345
> --- /dev/null
> +++ b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> @@ -0,0 +1,286 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===================================================
> +vhost/virtio pvp virtio-user multi-queues test plan
> +===================================================
> +
> +Description
> +===========
> +
> +Benchmark pvp virtio-user multi-queues test with 8 tx/rx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> +
> +Test flow
> +=========
> +
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +Test Case 1: pvp 2 queues test with virtio 1.1 mergeable path
> +=============================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's rx/tx packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 2: pvp 2 queues test with Virtio 1.1 normal path
> +==========================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 3: pvp 2 queues test with inorder mergeable path
> +==========================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 4: pvp 2 queues test with inorder no-mergeable path
> +=============================================================
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 5: pvp 2 queues test with mergeable path
> +==================================================
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 6: pvp 2 queues test with normal path
> +===============================================
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 7: pvp 2 queues test with vector_rx path
> +==================================================
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 8: pvp 2 queues test with virtio 1.1 inorder path
> +===========================================================
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput
> with below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-16 23:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-16 1:37 [dts] [PATCH] test_plans/pvp_virtio_user_multi_queues: add test plan for pvp vhost/virtio-user multi-queues test Yinan
2019-04-16 23:27 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).