From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "nareddy@marvell.com" <nareddy@marvell.com>,
"dts@dpdk.org" <dts@dpdk.org>
Cc: "fmasood@marvell.com" <fmasood@marvell.com>,
"avijay@marvell.com" <avijay@marvell.com>
Subject: Re: [dts] [PATCH] TestSuite_dynamic_config.py : Modified send packet count to support vector mode
Date: Wed, 12 Jun 2019 02:51:21 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BAB93ED@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1560146951-31322-1-git-send-email-nareddy@marvell.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of
> nareddy@marvell.com
> Sent: Monday, June 10, 2019 2:09 PM
> To: dts@dpdk.org
> Cc: fmasood@marvell.com; avijay@marvell.com; Praneeth Reddy
> <nareddy@marvell.com>
> Subject: [dts] [PATCH] TestSuite_dynamic_config.py : Modified send packet
> count to support vector mode
>
> From: Praneeth Reddy <nareddy@marvell.com>
>
> In vector mode 4 packets are required.
> Modified packet count to 4 in all test cases.
>
> Signed-off-by: Praneeth Reddy <nareddy@marvell.com>
> ---
> tests/TestSuite_dynamic_config.py | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/tests/TestSuite_dynamic_config.py
> b/tests/TestSuite_dynamic_config.py
> index 012421c..301f5b7 100644
> --- a/tests/TestSuite_dynamic_config.py
> +++ b/tests/TestSuite_dynamic_config.py
> @@ -105,7 +105,7 @@ class TestDynamicConfig(TestCase):
>
> self.tester.scapy_foreground()
> self.tester.scapy_append(
> - 'sendp([Ether(dst="%s", src="52:00:00:00:00:00")/Raw(load="X"*26)],
> iface="%s")' % (destMac, itf))
> + 'sendp([Ether(dst="%s",
> + src="52:00:00:00:00:00")/Raw(load="X"*26)], iface="%s", count=4)' %
> + (destMac, itf))
>
> self.tester.scapy_execute()
>
> @@ -142,7 +142,7 @@ class TestDynamicConfig(TestCase):
>
> # check the packet increment
> self.verify(int(cur_rxpkt) == int(pre_rxpkt)
> - + 1, "1st packet increment check error")
> + + 4, "1st packet increment check error")
>
> # send one packet with the portid MAC address
> self.dynamic_config_send_packet(portid, self.dest) @@ -153,7 +153,7
> @@ class TestDynamicConfig(TestCase):
>
> # check the packet increment
> self.verify(int(cur_rxpkt) == int(pre_rxpkt)
> - + 1, "2nd packet increment check error")
> + + 4, "2nd packet increment check error")
>
> def test_dynamic_config_disable_promiscuous(self):
> """
> @@ -180,7 +180,7 @@ class TestDynamicConfig(TestCase):
> "show port stats %d" % self.dut_ports[1], "testpmd> ")
> cur_rxpkt = utils.regexp(out, "TX-packets: ([0-9]+)")
> self.verify(int(cur_rxpkt) == int(
> - pre_rxpkt) + 1, "2nd packet increment error")
> + pre_rxpkt) + 4, "2nd packet increment error")
>
> def test_dynamic_config_broadcast(self):
> """
> @@ -198,7 +198,7 @@ class TestDynamicConfig(TestCase):
> out = self.dut.send_expect("show port stats %d" % self.dut_ports[1],
> "testpmd> ")
>
> cur_rxpkt = utils.regexp(out, "TX-packets: ([0-9]+)")
> - self.verify(int(cur_rxpkt) == 1, "not received broadcast packet")
> + self.verify(int(cur_rxpkt) == 4, "not received broadcast
> + packet")
>
> self.dut.send_expect("clear port stats all", "testpmd> ")
>
> @@ -224,7 +224,7 @@ class TestDynamicConfig(TestCase):
> out = self.dut.send_expect("show port stats %d" % self.dut_ports[1],
> "testpmd> ")
>
> cur_rxpkt = utils.regexp(out, "TX-packets: ([0-9]+)")
> - self.verify(int(cur_rxpkt) == 1, "enable allmulti switch, not received
> allmulti packet")
> + self.verify(int(cur_rxpkt) == 4, "enable allmulti switch, not
> + received allmulti packet")
>
> self.dut.send_expect("clear port stats all", "testpmd> ")
> self.dut.send_expect("set allmulti all off", "testpmd> ") @@ -257,7
> +257,7 @@ class TestDynamicConfig(TestCase):
>
> # check the packet increment
> self.verify(int(cur_rxpkt) == int(pre_rxpkt)
> - + 1, "1st packet increment error")
> + + 4, "1st packet increment error")
>
> # send one packet with the portid MAC address
> self.dynamic_config_send_packet(portid, self.dest) @@ -268,7 +268,7
> @@ class TestDynamicConfig(TestCase):
>
> # check the packet increment
> self.verify(int(cur_rxpkt) == int(pre_rxpkt)
> - + 1, "2nd packet increment error")
> + + 4, "2nd packet increment error")
>
> #self.dut.send_expect("quit", "# ", 30)
>
> --
> 1.8.3.1
prev parent reply other threads:[~2019-06-12 2:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-10 6:09 nareddy
2019-06-12 2:51 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BAB93ED@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=avijay@marvell.com \
--cc=dts@dpdk.org \
--cc=fmasood@marvell.com \
--cc=nareddy@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).