Re: [dts] [PATCH]test_plans: add flow_filtering_test_plan.rst

["Tu, Lijuan" <lijuan.tu@intel.com>]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Peng Yuan
> Sent: Friday, August 23, 2019 10:54 AM
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: [dts] [PATCH]test_plans: add flow_filtering_test_plan.rst
> 
> Add flow_filtering_test_plan.rst to test_plans
> 
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
> 
> diff --git a/test_plans/flow_filtering_test_plan.rst
> b/test_plans/flow_filtering_test_plan.rst
> new file mode 100644
> index 0000000..50d740b
> --- /dev/null
> +++ b/test_plans/flow_filtering_test_plan.rst
> @@ -0,0 +1,98 @@
> +.. Copyright (c) <2011-2019>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +====================
> +Flow Filtering Tests
> +====================
> +
> +The Basic RTE flow filtering sample application is a simple example of
> +a creating a RTE flow rule. It is intended as a demonstration of the
> +basic components RTE flow rules.
> +The Flow Filtering results are produced using ''flow'' application::
> +
> +    ./flow -l 1 -n 1
> +
> +There is a flow rule defined in the sample code.
> +You can check the detailed information of the flow rule from
> +http://doc.dpdk.org/guides/sample_app_ug/flow_filtering.html
> +
> +The matching item is dst IP address: "192.168.1.1".
> +The match action is entering the queue 1.
> +
> +Prerequisites
> +=============
> +The DUT must have one 10G Ethernet ports connected to one port on
> +Tester that are controlled by packet generator::
> +
> +    dut_port_0 <---> tester_port_0
> +
> +Assume the DUT 10G Ethernet ports' pci device id is as the following::
> +
> +    dut_port_0 : "0000:05:00.0"
> +    mac_address: "00:00:00:00:01:00"
> +
> +Bind the port to dpdk igb_uio driver::
> +
> +    ./usertools/dpdk-devbind.py -b igb_uio 05:00.0
> +
> +Test Case: match rule
> +=====================
> +1. Start the application with default settings::
> +
> +    ./flow -l 1 -n 1
> +
> +2. Send packets which matches the defined rule from tester::
> +
> +    Pkt1 = Ether(dst="00:00:00:00:01:00")/IP(src="0.0.0.0", dst="192.168.1.1")
> \
> +    /Raw("x"*20)
> +    Pkt2 = Ether(dst="00:00:00:00:01:00")/IP(src="0.0.0.1", dst="192.168.1.1")
> \
> +    /Raw("x"*20)
> +
> +3. Check the packets are received by queue 1::
> +
> +    src=A4:BF:01:07:47:C8 - dst=00:00:00:00:01:00 - queue=0x1
> +    src=A4:BF:01:07:47:C8 - dst=00:00:00:00:01:00 - queue=0x1
> +
> +Test Case: dismatch rule
> +========================
> +1. Start the application with default settings::
> +
> +    ./flow -l 1 -n 1
> +
> +2. Send packet which dismatches the defined rule from tester::
> +
> +    Pkt1 = Ether(dst="00:00:00:00:01:00")/IP(src="0.0.0.0", dst="192.168.1.2")
> \
> +    /Raw("x"*20)
> +
> +3. Check the packet is not received by queue 1::
> +
> +    src=A4:BF:01:07:47:C8 - dst=00:00:00:00:01:00 - queue=0x0
> --
> 2.7.4