From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: add virtio pvp test for performance track
Date: Mon, 13 Jan 2020 03:13:50 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BBA8558@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200112190246.4431-1-yinan.wang@intel.com>
applied
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, January 13, 2020 3:03 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add virtio pvp test for performance
> track
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> add vhost/virtio pvp packed ring inorder path test for performance track
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../pvp_multi_paths_performance_test_plan.rst | 69 ++++++++++++++++---
> ...host_single_core_performance_test_plan.rst | 68 ++++++++++++++----
> ...rtio_single_core_performance_test_plan.rst | 68 +++++++++++++++---
> 3 files changed, 173 insertions(+), 32 deletions(-)
>
> diff --git a/test_plans/pvp_multi_paths_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_performance_test_plan.rst
> index 477c68d..9da51ba 100644
> --- a/test_plans/pvp_multi_paths_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_performance_test_plan.rst
> @@ -34,9 +34,10 @@
> vhost/virtio pvp multi-paths performance test plan
> ==================================================
>
> -Benchmark pvp multi-paths performance with 7 tx/rx paths.
> -Includes mergeable, normal, vector_rx, inorder mergeable, -inorder no-
> mergeable, virtio 1.1 mergeable, virtio 1.1 normal path.
> +Benchmark PVP multi-paths performance with 9 tx/rx paths.
> +Includes mergeable, non-mergeable, vector_rx, inorder mergeable,
> +inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> +virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
> Give 1 core for vhost and virtio respectively.
>
> Test flow
> @@ -69,8 +70,8 @@ Test Case 1: pvp test with virtio 1.1 mergeable path
>
> testpmd>show port stats all
>
> -Test Case 2: pvp test with virtio 1.1 normal path -
> =================================================
> +Test Case 2: pvp test with virtio 1.1 non-mergeable path
> +========================================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -119,8 +120,8 @@ Test Case 3: pvp test with inorder mergeable path
>
> testpmd>show port stats all
>
> -Test Case 4: pvp test with inorder no-mergeable path -
> ====================================================
> +Test Case 4: pvp test with inorder non-mergeable path
> +=====================================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -169,8 +170,8 @@ Test Case 5: pvp test with mergeable path
>
> testpmd>show port stats all
>
> -Test Case 6: pvp test with normal path
> -======================================
> +Test Case 6: pvp test with non-mergeable path
> +=============================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -215,6 +216,56 @@ Test Case 7: pvp test with vector_rx path
> >set fwd mac
> >start
>
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 8: pvp test with virtio 1.1 inorder mergeable path
> +============================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0'
> \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 9: pvp test with virtio 1.1 inorder non-mergeable path
> +===============================================================
> =
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0'
> \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> 3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> testpmd>show port stats all
> \ No newline at end of file
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> index e4d369f..92c0d60 100644
> ---
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> +++
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan
> +++ .rst
> @@ -34,10 +34,12 @@
> vhost/virtio pvp multi-paths vhost single core test plan
> ========================================================
>
> -Benchmark PVP vhost single core performance with 7 tx/rx paths.
> -Includes mergeable, normal, vector_rx, inorder mergeable, -inorder no-
> mergeable, virtio 1.1 mergeable, virtio 1.1 normal path.
> -Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower
> the virtio workload.
> +Benchmark PVP vhost single core performance with 9 tx/rx paths.
> +Includes mergeable, non-mergeable, vector_rx, inorder mergeable,
> +inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> +virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
> +Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side
> +to lower the virtio workload.
>
> Test flow
> =========
> @@ -58,15 +60,15 @@ Test Case 1: vhost single core performance test with
> virtio 1.1 mergeable path 2. Launch virtio-user by below command::
>
> ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> - --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1 \
> +
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,pa
> + cked_vq=1,mrg_rxbuf=1,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> >start
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 2: vhost single core performance test with virtio 1.1 normal path -
> ================================================================
> ===========
> +Test Case 2: vhost single core performance test with virtio 1.1
> +non-mergeable path
> +===============================================================
> ========
> +===========
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -79,7 +81,7 @@ Test Case 2: vhost single core performance test with
> virtio 1.1 normal path 2. Launch virtio-user by below command::
>
> ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> - --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0 \
> +
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,pa
> + cked_vq=1,mrg_rxbuf=0,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> >start
> @@ -107,8 +109,8 @@ Test Case 3: vhost single core performance test with
> inorder mergeable path
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 4: vhost single core performance test with inorder no-mergeable
> path -
> ================================================================
> ==============
> +Test Case 4: vhost single core performance test with inorder
> +non-mergeable path
> +===============================================================
> ========
> +========
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -149,8 +151,8 @@ Test Case 5: vhost single core performance test with
> mergeable path
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 6: vhost single core performance test with normal path -
> ================================================================
> +Test Case 6: vhost single core performance test with non-mergeable path
> +===============================================================
> ========
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -189,4 +191,46 @@ Test Case 7: vhost single core performance test with
> vector_rx path
> >set fwd io
> >start
>
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 8: vhost single core performance test with virtio 1.1 inorder
> +mergeable path
> +===============================================================
> ========
> +===============
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 9: vhost single core performance test with virtio 1.1 inorder
> +non-mergeable path
> +===============================================================
> ========
> +===================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> 3. Send packet with packet generator with different packet size, check the
> throughput.
> \ No newline at end of file
> diff --git
> a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rs
> t
> index e4394b6..990c18a 100644
> ---
> a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_pla
> +++ n.rst
> @@ -34,10 +34,12 @@
> vhost/virtio pvp multi-paths virtio single core test plan
> =========================================================
>
> -Benchmark pvp virtio single core performance with 7 tx/rx paths.
> -Includes mergeable, normal, vector_rx, inorder mergeable, -inorder no-
> mergeable, virtio 1.1 mergeable, virtio 1.1 normal path.
> -Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side to lower
> the vhost workload.
> +Benchmark pvp virtio single core performance with 9 tx/rx paths.
> +Includes mergeable, non-mergeable, vector_rx, inorder mergeable,
> +inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> +virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
> +Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side
> +to lower the vhost workload.
>
> Test flow
> =========
> @@ -66,8 +68,8 @@ Test Case 1: virtio single core performance test with
> virtio 1.1 mergeable path
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 2: virtio single core performance test with virtio 1.1 normal path -
> ================================================================
> ============
> +Test Case 2: virtio single core performance test with virtio 1.1
> +non-mergeable path
> +===============================================================
> ========
> +============
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -103,15 +105,15 @@ Test Case 3: virtio single core performance test
> with inorder mergeable path
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_orde
> + r=1,mrg_rxbuf=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 4: virtio single core performance test with inorder no-mergeable
> path -
> ================================================================
> ===============
> +Test Case 4: virtio single core performance test with inorder
> +non-mergeable path
> +===============================================================
> ========
> +=========
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -154,8 +156,8 @@ Test Case 5: virtio single core performance test with
> mergeable path
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 6: virtio single core performance test with normal path -
> ================================================================
> =
> +Test Case 6: virtio single core performance test with non-mergeable
> +path
> +===============================================================
> ========
> +=
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -196,4 +198,48 @@ Test Case 7: virtio single core performance test with
> vector_rx path
> >set fwd mac
> >start
>
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 8: virtio single core performance test with virtio 1.1
> +inorder mergeable path
> +===============================================================
> ========
> +================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>set fwd io
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 9: virtio single core performance test with virtio 1.1
> +inorder non-mergeable path
> +===============================================================
> ========
> +====================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>set fwd io
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> 3. Send packet with packet generator with different packet size, check the
> throughput.
> \ No newline at end of file
> --
> 2.17.1
prev parent reply other threads:[~2020-01-13 3:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-12 19:02 Yinan
2020-01-13 3:13 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BBA8558@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).