* [dts] [PATCH v1] test_plans: move cases to loopback_virtio_user_server_mode_test_plan.rst
@ 2020-02-23 20:00 Yinan
2020-02-25 1:27 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-02-23 20:00 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...user_packed_ring_server_mode_test_plan.rst | 348 ------------------
1 file changed, 348 deletions(-)
delete mode 100644 test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
diff --git a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
deleted file mode 100644
index 4cbee5f..0000000
--- a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
+++ /dev/null
@@ -1,348 +0,0 @@
-.. Copyright (c) <2019>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOgit T LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-==========================================
-Packed ring loopback server mode test plan
-==========================================
-
-Virtio-user server mode is a feature to enable virtio-user as the server, vhost as the client, thus after vhost-user is killed then relaunched,
-virtio-user can reconnect back to vhost-user again; at another hand, virtio-user also can reconnect back to vhost-user after virtio-user is killed.This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes virtio 1.0 mergeable, normal, vector_rx, inorder no-mergeable, inorder mergeable path and virtio 1.1 mergeable, non-mergeable, inorder mergeable and inorder non-mergeable path.
-
-
-Test Case 1: Basic test for virtio-user server mode, launch virtio-user first
-=============================================================================
-
-1. Launch virtio-user as server mode::
-
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa
- >set fwd mac
- >start
-
-2. Launch vhost as client mode::
-
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1
- >set fwd mac
- >start tx_first 32
-
-3. Run below command to get throughput,verify the loopback throughput is not zero::
-
- testpmd>show port stats all
-
-Test Case 2: loopback reconnect test with virtio 1.1 mergeable path and server mode
-===================================================================================
-
-1. launch vhost as client mode with 2 queues::
-
- rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start
-
-2. Launch virtio-user as server mode with 2 queues::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-3. Quit vhost side testpmd, check the virtio-user side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-4. Relaunch vhost and send packets::
-
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-6. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-7. Quit virtio-user side testpmd, check the vhost side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-8. Relaunch virtio-user and send packets::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-10. Port restart at vhost side by below command and re-calculate the average throughput::
-
- testpmd>stop
- testpmd>port stop 0
- testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
-
-11. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-Test Case 3: loopback reconnect test with virtio 1.1 non-mergeable path and server mode
-=======================================================================================
-
-1. launch vhost as client mode with 2 queues::
-
- rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start
-
-2. Launch virtio-user as server mode with 2 queues::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-3. Quit vhost side testpmd, check the virtio-user side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-4. Relaunch vhost and send packets::
-
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-6. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-7. Quit virtio-user side testpmd, check the vhost side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-8. Relaunch virtio-user and send packets::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-10. Port restart at vhost side by below command and re-calculate the average throughput::
-
- testpmd>stop
- testpmd>port stop 0
- testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
-
-11. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-Test Case 4: loopback reconnect test with virtio 1.1 inorder mergeable path and server mode
-===========================================================================================
-
-1. launch vhost as client mode with 2 queues::
-
- rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start
-
-2. Launch virtio-user as server mode with 2 queues::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-3. Quit vhost side testpmd, check the virtio-user side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-4. Relaunch vhost and send packets::
-
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-6. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-7. Quit virtio-user side testpmd, check the vhost side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-8. Relaunch virtio-user and send packets::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-10. Port restart at vhost side by below command and re-calculate the average throughput::
-
- testpmd>stop
- testpmd>port stop 0
- testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
-
-11. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-Test Case 5: loopback reconnect test with virtio 1.1 inorder non-mergeable path and server mode
-===============================================================================================
-
-1. launch vhost as client mode with 2 queues::
-
- rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start
-
-2. Launch virtio-user as server mode with 2 queues::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-3. Quit vhost side testpmd, check the virtio-user side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-4. Relaunch vhost and send packets::
-
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-6. Check each RX/TX queue has packets::
-
- testpmd>stop
-
-7. Quit virtio-user side testpmd, check the vhost side link status::
-
- testpmd> show port info 0
- #it should show "down"
-
-8. Relaunch virtio-user and send packets::
-
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
- >set fwd mac
- >start tx_first 32
-
-9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
-
- testpmd> show port info 0
- #it should show up"
- testpmd>show port stats all
-
-10. Port restart at vhost side by below command and re-calculate the average throughput::
-
- testpmd>stop
- testpmd>port stop 0
- testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
-
-11. Check each RX/TX queue has packets::
-
- testpmd>stop
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans: move cases to loopback_virtio_user_server_mode_test_plan.rst
2020-02-23 20:00 [dts] [PATCH v1] test_plans: move cases to loopback_virtio_user_server_mode_test_plan.rst Yinan
@ 2020-02-25 1:27 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-02-25 1:27 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, February 24, 2020 4:00 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: move cases to
> loopback_virtio_user_server_mode_test_plan.rst
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...user_packed_ring_server_mode_test_plan.rst | 348 ------------------
> 1 file changed, 348 deletions(-)
> delete mode 100644
> test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
>
> diff --git
> a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
> b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
> deleted file mode 100644
> index 4cbee5f..0000000
> ---
> a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
> +++ /dev/null
> @@ -1,348 +0,0 @@
> -.. Copyright (c) <2019>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOgit T LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -==========================================
> -Packed ring loopback server mode test plan -
> ==========================================
> -
> -Virtio-user server mode is a feature to enable virtio-user as the server, vhost
> as the client, thus after vhost-user is killed then relaunched, -virtio-user can
> reconnect back to vhost-user again; at another hand, virtio-user also can
> reconnect back to vhost-user after virtio-user is killed.This feature test need
> cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes virtio 1.0
> mergeable, normal, vector_rx, inorder no-mergeable, inorder mergeable
> path and virtio 1.1 mergeable, non-mergeable, inorder mergeable and
> inorder non-mergeable path.
> -
> -
> -Test Case 1: Basic test for virtio-user server mode, launch virtio-user first -
> ================================================================
> =============
> -
> -1. Launch virtio-user as server mode::
> -
> - ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa
> - >set fwd mac
> - >start
> -
> -2. Launch vhost as client mode::
> -
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --
> txq=1 --nb-cores=1
> - >set fwd mac
> - >start tx_first 32
> -
> -3. Run below command to get throughput,verify the loopback throughput is
> not zero::
> -
> - testpmd>show port stats all
> -
> -Test Case 2: loopback reconnect test with virtio 1.1 mergeable path and
> server mode -
> ================================================================
> ===================
> -
> -1. launch vhost as client mode with 2 queues::
> -
> - rm -rf vhost-net*
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start
> -
> -2. Launch virtio-user as server mode with 2 queues::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -3. Quit vhost side testpmd, check the virtio-user side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -4. Relaunch vhost and send packets::
> -
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -6. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -7. Quit virtio-user side testpmd, check the vhost side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -8. Relaunch virtio-user and send packets::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> -
> - testpmd>stop
> - testpmd>port stop 0
> - testpmd>port start 0
> - testpmd>start tx_first 32
> - testpmd>show port stats all
> -
> -11. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -Test Case 3: loopback reconnect test with virtio 1.1 non-mergeable path and
> server mode -
> ================================================================
> =======================
> -
> -1. launch vhost as client mode with 2 queues::
> -
> - rm -rf vhost-net*
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start
> -
> -2. Launch virtio-user as server mode with 2 queues::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -3. Quit vhost side testpmd, check the virtio-user side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -4. Relaunch vhost and send packets::
> -
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -6. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -7. Quit virtio-user side testpmd, check the vhost side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -8. Relaunch virtio-user and send packets::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> -
> - testpmd>stop
> - testpmd>port stop 0
> - testpmd>port start 0
> - testpmd>start tx_first 32
> - testpmd>show port stats all
> -
> -11. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -Test Case 4: loopback reconnect test with virtio 1.1 inorder mergeable path
> and server mode -
> ================================================================
> ===========================
> -
> -1. launch vhost as client mode with 2 queues::
> -
> - rm -rf vhost-net*
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start
> -
> -2. Launch virtio-user as server mode with 2 queues::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -3. Quit vhost side testpmd, check the virtio-user side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -4. Relaunch vhost and send packets::
> -
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -6. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -7. Quit virtio-user side testpmd, check the vhost side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -8. Relaunch virtio-user and send packets::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> -
> - testpmd>stop
> - testpmd>port stop 0
> - testpmd>port start 0
> - testpmd>start tx_first 32
> - testpmd>show port stats all
> -
> -11. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -Test Case 5: loopback reconnect test with virtio 1.1 inorder non-mergeable
> path and server mode -
> ================================================================
> ===============================
> -
> -1. launch vhost as client mode with 2 queues::
> -
> - rm -rf vhost-net*
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start
> -
> -2. Launch virtio-user as server mode with 2 queues::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -3. Quit vhost side testpmd, check the virtio-user side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -4. Relaunch vhost and send packets::
> -
> - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -6. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> -
> -7. Quit virtio-user side testpmd, check the vhost side link status::
> -
> - testpmd> show port info 0
> - #it should show "down"
> -
> -8. Relaunch virtio-user and send packets::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start tx_first 32
> -
> -9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> -
> - testpmd> show port info 0
> - #it should show up"
> - testpmd>show port stats all
> -
> -10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> -
> - testpmd>stop
> - testpmd>port stop 0
> - testpmd>port start 0
> - testpmd>start tx_first 32
> - testpmd>show port stats all
> -
> -11. Check each RX/TX queue has packets::
> -
> - testpmd>stop
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-25 1:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-23 20:00 [dts] [PATCH v1] test_plans: move cases to loopback_virtio_user_server_mode_test_plan.rst Yinan
2020-02-25 1:27 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).