From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: delete pvp_virtio_user_multi_queues_test_plan
Date: Fri, 13 Mar 2020 06:51:55 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BBEC8C1@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200310180142.66308-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, March 11, 2020 2:02 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: delete
> pvp_virtio_user_multi_queues_test_plan
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...pvp_virtio_user_multi_queues_test_plan.rst | 271 ------------------
> 1 file changed, 271 deletions(-)
> delete mode 100644 test_plans/pvp_virtio_user_multi_queues_test_plan.rst
>
> diff --git a/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> deleted file mode 100644
> index 3139050..0000000
> --- a/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> +++ /dev/null
> @@ -1,271 +0,0 @@
> -.. Copyright (c) <2019>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -===================================================
> -vhost/virtio pvp virtio-user multi-queues test plan -
> ===================================================
> -
> -Description
> -===========
> -
> -Benchmark pvp virtio-user multi-queues test with 8 tx/rx paths.
> -Includes mergeable, normal, vector_rx, inorder mergeable, -inorder no-
> mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
> -
> -Test flow
> -=========
> -
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> -
> -Test Case 1: pvp 2 queues test with virtio 1.1 mergeable path -
> =============================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's rx/tx packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 2: pvp 2 queues test with virtio 1.1 normal path -
> ==========================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 3: pvp 2 queues test with inorder mergeable path -
> ==========================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 4: pvp 2 queues test with inorder no-mergeable path -
> =============================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 5: pvp 2 queues test with mergeable path -
> ==================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 6: pvp 2 queues test with normal path -
> ===============================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 7: pvp 2 queues test with vector_rx path -
> ==================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> -
> -Test Case 8: pvp 2 queues test with virtio 1.1 inorder path -
> ===========================================================
> -
> -1. Bind one port to igb_uio, then launch vhost by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> - >set fwd mac
> - >start
> -
> -3. Send different ip packets with packet generator, check the throughput
> with below command::
> -
> - testpmd>show port stats all
> -
> -4. Check each queue's RX/TX packet numbers::
> -
> - testpmd>stop
> \ No newline at end of file
> --
> 2.17.1
prev parent reply other threads:[~2020-03-13 6:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-10 18:01 Yinan
2020-03-13 6:51 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BBEC8C1@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).