* [dts][PATCH V1 0/2] Modify blocklist test plan and script
@ 2022-06-08 4:55 Yaqi Tang
2022-06-08 4:55 ` [dts][PATCH V1 1/2] test_plans/blocklist: Modify testpmd port and adjust format Yaqi Tang
2022-06-08 4:55 ` [dts][PATCH V1 2/2] tests/blocklist: modify test case name Yaqi Tang
0 siblings, 2 replies; 4+ messages in thread
From: Yaqi Tang @ 2022-06-08 4:55 UTC (permalink / raw)
To: dts; +Cc: xueqin.lin, Yaqi Tang
Testpmd port in test plan is wrong and script case name is nonstandard,
so modify blocklist test plan and script.
Yaqi Tang (2):
test_plans/blocklist
tests/blocklist
test_plans/blocklist_test_plan.rst | 171 +++++++++++++++--------------
tests/TestSuite_blocklist.py | 6 +-
2 files changed, 89 insertions(+), 88 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts][PATCH V1 1/2] test_plans/blocklist: Modify testpmd port and adjust format
2022-06-08 4:55 [dts][PATCH V1 0/2] Modify blocklist test plan and script Yaqi Tang
@ 2022-06-08 4:55 ` Yaqi Tang
2022-06-08 4:55 ` [dts][PATCH V1 2/2] tests/blocklist: modify test case name Yaqi Tang
1 sibling, 0 replies; 4+ messages in thread
From: Yaqi Tang @ 2022-06-08 4:55 UTC (permalink / raw)
To: dts; +Cc: xueqin.lin, Yaqi Tang
Testpmd port in test plan is wrong, so modify test case 3 testpmd port.
And adjust the format of test plan according to test plan template.
Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
---
test_plans/blocklist_test_plan.rst | 171 +++++++++++++++--------------
1 file changed, 86 insertions(+), 85 deletions(-)
diff --git a/test_plans/blocklist_test_plan.rst b/test_plans/blocklist_test_plan.rst
index f20fc207..26d1f202 100644
--- a/test_plans/blocklist_test_plan.rst
+++ b/test_plans/blocklist_test_plan.rst
@@ -18,88 +18,89 @@ to the device under test::
modprobe vfio-pci
usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
-Test Case: Testpmd with no blocklisted device
-=============================================
-
-Run testpmd in interactive mode and ensure that at least 2 ports
-are bound and available::
-
- build/app/dpdk-testpmd -c 3 -- -i
- ....
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.0/driver/unbind
- EAL: Core 1 is ready (tid=357fc700)
- EAL: bind PCI device 0000:01:00.0 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:01:00.0
- EAL: PCI memory mapped at 0x7fe6b68c7000
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.1/driver/unbind
- EAL: bind PCI device 0000:01:00.1 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:01:00.1
- EAL: PCI memory mapped at 0x7fe6b6847000
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.0/driver/unbind
- EAL: bind PCI device 0000:02:00.0 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:02:00.0
- EAL: PCI memory mapped at 0x7fe6b6580000
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.1/driver/unbind
- EAL: bind PCI device 0000:02:00.1 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:02:00.1
- EAL: PCI memory mapped at 0x7fe6b6500000
- Interactive-mode selected
- Initializing port 0... done: Link Up - speed 10000 Mbps - full-duplex
- Initializing port 1... done: Link Up - speed 10000 Mbps - full-duplex
- Initializing port 2... done: Link Up - speed 10000 Mbps - full-duplex
- Initializing port 3... done: Link Up - speed 10000 Mbps - full-duplex
-
-
-Test Case: Testpmd with one port blocklisted
-============================================
-
-Select first available port to be blocklisted and specify it with -b option. For the example above::
-
- build/app/dpdk-testpmd -c 3 -b 0000:01:00.0 -- -i
-
-Check that corresponding device is skipped for binding, and
-only 3 ports are available now:::
-
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.1/driver/unbind
- EAL: bind PCI device 0000:01:00.1 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:01:00.1
- EAL: PCI memory mapped at 0x7f0037912000
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.0/driver/unbind
- EAL: bind PCI device 0000:02:00.0 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:02:00.0
- EAL: PCI memory mapped at 0x7f0037892000
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.1/driver/unbind
- EAL: bind PCI device 0000:02:00.1 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:02:00.1
- EAL: PCI memory mapped at 0x7f0037812000
- Interactive-mode selected
- Initializing port 0... done: Link Up - speed 10000 Mbps - full-duplex
- Initializing port 1... done: Link Up - speed 10000 Mbps - full-duplex
- Initializing port 2... done: Link Up - speed 10000 Mbps - full-duplex
-
-
-Test Case: Testpmd with all but one port blocklisted
-====================================================
-
-Blocklist all devices except the last one.
-For the example above:::
-
- build/app/dpdk-testpmd -c 3 -b 0000:01:00.0 -b 0000:01:00.0 -b 0000:02:00.0 -- -i
-
-Check that 3 corresponding device is skipped for binding, and
-only 1 ports is available now:::
-
- EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.1/driver/unbind
- EAL: bind PCI device 0000:02:00.1 to uio driver
- EAL: Device bound
- EAL: map PCI resource for device 0000:02:00.1
- EAL: PCI memory mapped at 0x7f22e9aeb000
- Interactive-mode selected
- Initializing port 0... done: Link Up - speed 10000 Mbps - full-duplex
+Test Case
+=========
+
+Test Case 1: Testpmd with no blocklisted device
+-----------------------------------------------
+
+1. Run testpmd in interactive mode and ensure that at least 2 ports
+ are bound and available::
+
+ build/app/dpdk-testpmd -c 3 -- -i
+ ....
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.0/driver/unbind
+ EAL: Core 1 is ready (tid=357fc700)
+ EAL: bind PCI device 0000:01:00.0 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:01:00.0
+ EAL: PCI memory mapped at 0x7fe6b68c7000
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.1/driver/unbind
+ EAL: bind PCI device 0000:01:00.1 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:01:00.1
+ EAL: PCI memory mapped at 0x7fe6b6847000
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.0/driver/unbind
+ EAL: bind PCI device 0000:02:00.0 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:02:00.0
+ EAL: PCI memory mapped at 0x7fe6b6580000
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.1/driver/unbind
+ EAL: bind PCI device 0000:02:00.1 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:02:00.1
+ EAL: PCI memory mapped at 0x7fe6b6500000
+ Interactive-mode selected
+ Initializing port 0... done: Link Up - speed 10000 Mbps - full-duplex
+ Initializing port 1... done: Link Up - speed 10000 Mbps - full-duplex
+ Initializing port 2... done: Link Up - speed 10000 Mbps - full-duplex
+ Initializing port 3... done: Link Up - speed 10000 Mbps - full-duplex
+
+Test Case 2: Testpmd with one port blocklisted
+----------------------------------------------
+
+1. Select first available port to be blocklisted and specify it with -b option. For the example above::
+
+ build/app/dpdk-testpmd -c 3 -b 0000:01:00.0 -- -i
+
+2. Check that corresponding device is skipped for binding, and
+ only 3 ports are available now:::
+
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.1/driver/unbind
+ EAL: bind PCI device 0000:01:00.1 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:01:00.1
+ EAL: PCI memory mapped at 0x7f0037912000
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.0/driver/unbind
+ EAL: bind PCI device 0000:02:00.0 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:02:00.0
+ EAL: PCI memory mapped at 0x7f0037892000
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.1/driver/unbind
+ EAL: bind PCI device 0000:02:00.1 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:02:00.1
+ EAL: PCI memory mapped at 0x7f0037812000
+ Interactive-mode selected
+ Initializing port 0... done: Link Up - speed 10000 Mbps - full-duplex
+ Initializing port 1... done: Link Up - speed 10000 Mbps - full-duplex
+ Initializing port 2... done: Link Up - speed 10000 Mbps - full-duplex
+
+Test Case 3: Testpmd with all but one port blocklisted
+------------------------------------------------------
+
+1. Blocklist all devices except the last one.
+ For the example above:::
+
+ build/app/dpdk-testpmd -c 3 -b 0000:01:00.0 -b 0000:01:00.1 -b 0000:02:00.0 -- -i
+
+2. Check that 3 corresponding device is skipped for binding, and
+ only 1 ports is available now:::
+
+ EAL: unbind kernel driver /sys/bus/pci/devices/0000:02:00.1/driver/unbind
+ EAL: bind PCI device 0000:02:00.1 to uio driver
+ EAL: Device bound
+ EAL: map PCI resource for device 0000:02:00.1
+ EAL: PCI memory mapped at 0x7f22e9aeb000
+ Interactive-mode selected
+ Initializing port 0... done: Link Up - speed 10000 Mbps - full-duplex
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [dts][PATCH V1 2/2] tests/blocklist: modify test case name
2022-06-08 4:55 [dts][PATCH V1 0/2] Modify blocklist test plan and script Yaqi Tang
2022-06-08 4:55 ` [dts][PATCH V1 1/2] test_plans/blocklist: Modify testpmd port and adjust format Yaqi Tang
@ 2022-06-08 4:55 ` Yaqi Tang
2022-06-15 9:01 ` lijuan.tu
1 sibling, 1 reply; 4+ messages in thread
From: Yaqi Tang @ 2022-06-08 4:55 UTC (permalink / raw)
To: dts; +Cc: xueqin.lin, Yaqi Tang
script case name is nonstandard, so modify test case name.
Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
---
tests/TestSuite_blocklist.py | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tests/TestSuite_blocklist.py b/tests/TestSuite_blocklist.py
index 635502ff..9aafc6fe 100644
--- a/tests/TestSuite_blocklist.py
+++ b/tests/TestSuite_blocklist.py
@@ -63,7 +63,7 @@ class TestBlockList(TestCase):
"Not blocklisted port is being blocklisted",
)
- def test_bl_noblocklisted(self):
+ def test_bl_no_blocklisted(self):
"""
Run testpmd with no blocklisted device.
"""
@@ -73,7 +73,7 @@ class TestBlockList(TestCase):
self.check_blocklisted_ports(out, self.ports)
- def test_bl_oneportblocklisted(self):
+ def test_bl_one_port_blocklisted(self):
"""
Run testpmd with one port blocklisted.
"""
@@ -83,7 +83,7 @@ class TestBlockList(TestCase):
)
self.check_blocklisted_ports(out, self.ports[1:])
- def test_bl_allbutoneportblocklisted(self):
+ def test_bl_all_but_one_port_blocklisted(self):
"""
Run testpmd with all but one port blocklisted.
"""
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-06-15 9:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-08 4:55 [dts][PATCH V1 0/2] Modify blocklist test plan and script Yaqi Tang
2022-06-08 4:55 ` [dts][PATCH V1 1/2] test_plans/blocklist: Modify testpmd port and adjust format Yaqi Tang
2022-06-08 4:55 ` [dts][PATCH V1 2/2] tests/blocklist: modify test case name Yaqi Tang
2022-06-15 9:01 ` lijuan.tu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).