* [dts][PATCH V1] Remove unnecessary tx-offloads=0x8fff in test plan
@ 2022-04-22 14:17 Lingli Chen
2022-04-26 2:59 ` lijuan.tu
0 siblings, 1 reply; 2+ messages in thread
From: Lingli Chen @ 2022-04-22 14:17 UTC (permalink / raw)
To: dts; +Cc: Lingli Chen
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 17350 bytes --]
A lots of test plans start testpmd with “tx-offloads=0x8fff” which is not necessary, and will cause errors, so remove it.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/ddp_gtp_test_plan.rst | 2 +-
test_plans/ddp_mpls_test_plan.rst | 2 +-
test_plans/external_mempool_handler_test_plan.rst | 10 +++++-----
test_plans/generic_flow_api_test_plan.rst | 12 ++++++------
test_plans/tx_preparation_test_plan.rst | 4 ++--
test_plans/uni_pkt_test_plan.rst | 2 +-
test_plans/vf_daemon_test_plan.rst | 2 +-
test_plans/vf_jumboframe_test_plan.rst | 2 +-
test_plans/vf_macfilter_test_plan.rst | 8 ++++----
test_plans/vf_packet_rxtx_test_plan.rst | 2 +-
| 2 +-
test_plans/vf_to_vf_nic_bridge_test_plan.rst | 4 ++--
test_plans/vf_vlan_test_plan.rst | 4 ++--
test_plans/vlan_ethertype_config_test_plan.rst | 12 ++++++------
14 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/test_plans/ddp_gtp_test_plan.rst b/test_plans/ddp_gtp_test_plan.rst
index 0fd5a50d..9ce797e3 100644
--- a/test_plans/ddp_gtp_test_plan.rst
+++ b/test_plans/ddp_gtp_test_plan.rst
@@ -82,7 +82,7 @@ Prerequisites
port topology mode, add txq/rxq to enable multi-queues. In general, PF's
max queue is 64, VF's max queue is 4::
- ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect --port-topology=chained --tx-offloads=0x8fff --txq=64 --rxq=64
+ ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect --port-topology=chained --txq=64 --rxq=64
Test Case: Load dynamic device personalization
diff --git a/test_plans/ddp_mpls_test_plan.rst b/test_plans/ddp_mpls_test_plan.rst
index 6c4d0e01..c5962046 100644
--- a/test_plans/ddp_mpls_test_plan.rst
+++ b/test_plans/ddp_mpls_test_plan.rst
@@ -70,7 +70,7 @@ Prerequisites
enable multi-queues. In general, PF's max queue is 64, VF's max queue
is 4::
- ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --tx-offloads=0x8fff
+ ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained
--txq=4 --rxq=4
diff --git a/test_plans/external_mempool_handler_test_plan.rst b/test_plans/external_mempool_handler_test_plan.rst
index 0df16182..571fce9c 100644
--- a/test_plans/external_mempool_handler_test_plan.rst
+++ b/test_plans/external_mempool_handler_test_plan.rst
@@ -54,7 +54,7 @@ Test Case 1: Multiple producers and multiple consumers
3. Start testpmd with two ports and start forwarding::
- ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> start
@@ -75,7 +75,7 @@ Test Case 2: Single producer and Single consumer
3. Start testpmd with two ports and start forwarding::
- ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> start
@@ -96,7 +96,7 @@ Test Case 3: Single producer and Multiple consumers
3. Start testpmd with two ports and start forwarding::
- ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> start
@@ -117,7 +117,7 @@ Test Case 4: Multiple producers and single consumer
3. Start testpmd with two ports and start forwarding::
- ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> start
@@ -138,7 +138,7 @@ Test Case 4: Stack mempool handler
3. Start testpmd with two ports and start forwarding::
- ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> start
diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index 6fd039a0..46950797 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -461,7 +461,7 @@ Test case: Fortville tunnel vxlan
1. Launch the app ``testpmd`` with the following arguments::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --tx-offloads=0x8fff --disable-rss
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --disable-rss
testpmd> rx_vxlan_port add 4789 0
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -469,7 +469,7 @@ Test case: Fortville tunnel vxlan
testpmd> start
the pf's mac address is 00:00:00:00:01:00
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0 --file-prefix=vf --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff --disable-rss
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0 --file-prefix=vf --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --disable-rss
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> set promisc all off
@@ -564,19 +564,19 @@ Test case: Fortville tunnel nvgre
1. Launch the app ``testpmd`` with the following arguments::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -a 05:00.0 --file-prefix=pf --socket-mem=1024,1024 -- -i --rxq=16 --txq=16
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> set promisc all off
testpmd> start
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e0000 -n 4 -a 05:02.0 --file-prefix=vf0 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> set promisc all off
testpmd> start
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1e00000 -n 4 -a 05:02.1 --file-prefix=vf1 --socket-mem=1024,1024 -- -i --rxq=4 --txq=4
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> set promisc all off
@@ -2009,7 +2009,7 @@ Test case: Dual vlan(QinQ)
1. set up testpmd with Fortville NICs::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16
2. verbose configuration::
diff --git a/test_plans/tx_preparation_test_plan.rst b/test_plans/tx_preparation_test_plan.rst
index a6d9a0b9..d61d772f 100644
--- a/test_plans/tx_preparation_test_plan.rst
+++ b/test_plans/tx_preparation_test_plan.rst
@@ -72,11 +72,11 @@ Change mtu for large packet::
ifconfig eth1 mtu 9000
-Launch the ``testpmd`` with the following arguments, set ``--tx-offloads=0x8fff`` to
+Launch the ``testpmd`` with the following arguments, set ``--tx-offloads=0x8000`` to
let TX checksum offloads, TSO mode in the “Full Featured” TX path, add
--max-pkt-len for large packet::
- ./app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=0x8fff --port-topology=chained
+ ./app/dpdk-testpmd -c 0x6 -n 4 -- -i --tx-offloads=0x8000 --port-topology=chained
--max-pkt-len=9000
Set the ``csum`` forwarding mode::
diff --git a/test_plans/uni_pkt_test_plan.rst b/test_plans/uni_pkt_test_plan.rst
index 68f12c92..cfb9544a 100644
--- a/test_plans/uni_pkt_test_plan.rst
+++ b/test_plans/uni_pkt_test_plan.rst
@@ -55,7 +55,7 @@ Plug in three different types of nic on the board.
Start testpmd and then enable rxonly and verbose mode::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i
set fwd rxonly
set verbose 1
start
diff --git a/test_plans/vf_daemon_test_plan.rst b/test_plans/vf_daemon_test_plan.rst
index 42c679ac..b75cb11b 100644
--- a/test_plans/vf_daemon_test_plan.rst
+++ b/test_plans/vf_daemon_test_plan.rst
@@ -87,7 +87,7 @@ Prerequisites
5. Start testpmd on host and vm0 in chained port topology::
- ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --tx-offloads=0x8fff
+ ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained
Test Case 1: Set VLAN insert for VF from PF
diff --git a/test_plans/vf_jumboframe_test_plan.rst b/test_plans/vf_jumboframe_test_plan.rst
index f7b480a2..53497014 100644
--- a/test_plans/vf_jumboframe_test_plan.rst
+++ b/test_plans/vf_jumboframe_test_plan.rst
@@ -86,7 +86,7 @@ Prerequisites
5. Start testpmd, set it in mac forward mode::
./<build_target>/app/dpdk-testpmd -c 0x0f-- -i --portmask=0x1 \
- --tx-offloads=0x8fff --max-pkt-len=9000--port-topology=loop
+ --tx-offloads=0x8000 --max-pkt-len=9000--port-topology=loop
testpmd> set fwd mac
testpmd> start
diff --git a/test_plans/vf_macfilter_test_plan.rst b/test_plans/vf_macfilter_test_plan.rst
index c7522fc0..4d3d345e 100644
--- a/test_plans/vf_macfilter_test_plan.rst
+++ b/test_plans/vf_macfilter_test_plan.rst
@@ -97,7 +97,7 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
disable promisc mode,set it in mac forward mode::
./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3
testpmd> port stop all
testpmd> port config all crc-strip on
@@ -175,7 +175,7 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
VF, disable promisc mode, add a new MAC to VF0 and then start::
./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3
testpmd> port stop all
testpmd> port config all crc-strip on
@@ -269,7 +269,7 @@ Test Case 3: test_dpdk_2pf_2vf_1vm_mac_add_filter
VF, disable promisc mode, add a new MAC to VF0 and then start::
./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3
testpmd> port stop all
testpmd> port config all crc-strip on
@@ -365,7 +365,7 @@ Test Case 4: test_dpdk_2pf_2vf_1vm_iplink_macfilter
disable promisc mode, set it in mac forward mode::
./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 -- -i --portmask=0x3
testpmd> port stop all
testpmd> port config all crc-strip on
diff --git a/test_plans/vf_packet_rxtx_test_plan.rst b/test_plans/vf_packet_rxtx_test_plan.rst
index 69b18038..7d720d73 100644
--- a/test_plans/vf_packet_rxtx_test_plan.rst
+++ b/test_plans/vf_packet_rxtx_test_plan.rst
@@ -97,7 +97,7 @@ Test Case 1: VF_packet_IO_kernel_PF_dpdk_VF
./usertools/dpdk-devbind.py -s --bind=igb_uio 00:06.0 00:07.0
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 \
- -- -i --portmask=0x3 --tx-offloads=0x8fff
+ -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> start
--git a/test_plans/vf_rss_test_plan.rst b/test_plans/vf_rss_test_plan.rst
index 9e575546..ce50072e 100644
--- a/test_plans/vf_rss_test_plan.rst
+++ b/test_plans/vf_rss_test_plan.rst
@@ -81,7 +81,7 @@ Testpmd configuration - 4 RX/TX queues per port
::
- dpdk-testpmd -c 1f -n 3 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff
+ dpdk-testpmd -c 1f -n 3 -- -i --rxq=4 --txq=4
Testpmd Configuration Options
-----------------------------
diff --git a/test_plans/vf_to_vf_nic_bridge_test_plan.rst b/test_plans/vf_to_vf_nic_bridge_test_plan.rst
index 7f2df59f..8ca54525 100644
--- a/test_plans/vf_to_vf_nic_bridge_test_plan.rst
+++ b/test_plans/vf_to_vf_nic_bridge_test_plan.rst
@@ -98,7 +98,7 @@ dpdk testpmd to vf in vm0, and verify the vf on vm0 can receive stream.
Step 1: run testpmd on vm0::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -n 1 -- -i --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -n 1 -- -i
Step 2: set rxonly and start on vm0::
@@ -149,7 +149,7 @@ Test Case3: test_2vf_k2d_scapy_stream
Step 1: run testpmd on vm0::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -n 1 -- -i --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -n 1 -- -i
Step 2: set rxonly and start on vm0::
diff --git a/test_plans/vf_vlan_test_plan.rst b/test_plans/vf_vlan_test_plan.rst
index eacaa4b0..a316cfa2 100644
--- a/test_plans/vf_vlan_test_plan.rst
+++ b/test_plans/vf_vlan_test_plan.rst
@@ -87,7 +87,7 @@ Prerequisites
5. Start testpmd, set it in rxonly mode and enable verbose output::
- dpdk-testpmd -c 0x0f -n 4 -a 00:04.0 -a 00:05.0 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ dpdk-testpmd -c 0x0f -n 4 -a 00:04.0 -a 00:05.0 -- -i --portmask=0x3
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
@@ -148,7 +148,7 @@ Test Case 3: VF tagged vlan tx
1. Start testpmd with full-featured tx code path and with mac forward mode::
- dpdk-testpmd -c f -n 3 -- -i --tx-offloads=0x8fff
+ dpdk-testpmd -c f -n 3 -- -i
testpmd> set fwd mac
testpmd> start
diff --git a/test_plans/vlan_ethertype_config_test_plan.rst b/test_plans/vlan_ethertype_config_test_plan.rst
index e620e6c7..17657c7b 100644
--- a/test_plans/vlan_ethertype_config_test_plan.rst
+++ b/test_plans/vlan_ethertype_config_test_plan.rst
@@ -60,7 +60,7 @@ Test Case 1: change VLAN TPID
1. Start testpmd, start in rxonly mode::
- ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
@@ -76,7 +76,7 @@ Test Case 2: test VLAN filtering on/off
1. Start testpmd, setup vlan filter on, start in mac forwarding mode::
- ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> vlan set filter on 0
testpmd> start
@@ -96,7 +96,7 @@ Test Case 3: test adding VLAN Tag Identifier with changing VLAN TPID
1. start testpmd, setup vlan filter on, start in mac forwarding mode::
- ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> vlan set filter on 0
testpmd> vlan set strip off 0
@@ -128,7 +128,7 @@ Test Case 4: test VLAN header stripping with changing VLAN TPID
1. start testpmd, setup vlan filter off, vlan strip on, start in mac forwarding mode::
- ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> vlan set filter off 0
testpmd> vlan set strip on 0
@@ -157,7 +157,7 @@ Test Case 5: test VLAN header inserting with changing VLAN TPID
1. start testpmd, enable vlan packet forwarding, start in mac forwarding mode::
- ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3
testpmd> set fwd mac
testpmd> vlan set filter off 0
testpmd> vlan set strip off 0
@@ -192,7 +192,7 @@ Test Case 6: Change S-Tag and C-Tag within QinQ
1. Start testpmd, enable QinQ, start in rxonly mode::
- ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3 --tx-offloads=0x8fff
+ ./dpdk-testpmd -c 0xff -n 4 -- -i --portmask=0x3
testpmd> vlan set qinq on 0
testpmd> set fwd rxonly
testpmd> set verbose 1
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dts][PATCH V1] Remove unnecessary tx-offloads=0x8fff in test plan
2022-04-22 14:17 [dts][PATCH V1] Remove unnecessary tx-offloads=0x8fff in test plan Lingli Chen
@ 2022-04-26 2:59 ` lijuan.tu
0 siblings, 0 replies; 2+ messages in thread
From: lijuan.tu @ 2022-04-26 2:59 UTC (permalink / raw)
To: dts, Lingli Chen; +Cc: Lingli Chen
On Fri, 22 Apr 2022 14:17:31 +0000, Lingli Chen <linglix.chen@intel.com> wrote:
> A lots of test plans start testpmd with “tx-offloads=0x8fff” which is not necessary, and will cause errors, so remove it.
>
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
Acked-by: Lijuan Tu <lijuan.tu@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-04-26 2:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-22 14:17 [dts][PATCH V1] Remove unnecessary tx-offloads=0x8fff in test plan Lingli Chen
2022-04-26 2:59 ` lijuan.tu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).