* [dts] [PATCH V5 1/2] tests/multiprocess_iavf: add vf multiprocess test case
@ 2022-05-25 8:52 Jiale Song
2022-05-25 8:52 ` [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: " Jiale Song
0 siblings, 1 reply; 4+ messages in thread
From: Jiale Song @ 2022-05-25 8:52 UTC (permalink / raw)
To: dts; +Cc: Jiale Song
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
tests/TestSuite_multiprocess_iavf.py | 1946 ++++++++++++++++++++++++++
1 file changed, 1946 insertions(+)
create mode 100644 tests/TestSuite_multiprocess_iavf.py
diff --git a/tests/TestSuite_multiprocess_iavf.py b/tests/TestSuite_multiprocess_iavf.py
new file mode 100644
index 00000000..2e301367
--- /dev/null
+++ b/tests/TestSuite_multiprocess_iavf.py
@@ -0,0 +1,1946 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Multi-process Test.
+"""
+
+import copy
+import os
+import random
+import re
+import time
+import traceback
+from collections import OrderedDict
+
+import framework.utils as utils
+from framework.exception import VerifyFailure
+from framework.packet import Packet
+from framework.pktgen import PacketGeneratorHelper
+from framework.pmd_output import PmdOutput
+from framework.test_case import TestCase, check_supported_nic
+from framework.utils import GREEN, RED
+
+from .rte_flow_common import FdirProcessing as fdirprocess
+from .rte_flow_common import RssProcessing as rssprocess
+
+executions = []
+
+
+class TestMultiprocess(TestCase):
+
+ support_nic = ["ICE_100G-E810C_QSFP", "ICE_25G-E810C_SFP", "ICE_25G-E810_XXV_SFP"]
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+
+ Multiprocess prerequisites.
+ Requirements:
+ OS is not freeBSD
+ DUT core number >= 4
+ multi_process build pass
+ """
+ # self.verify('bsdapp' not in self.target, "Multiprocess not support freebsd")
+
+ self.verify(len(self.dut.get_all_cores()) >= 4, "Not enough Cores")
+ self.dut_ports = self.dut.get_ports()
+ self.pkt = Packet()
+ self.socket = self.dut.get_numa_id(self.dut_ports[0])
+ extra_option = "-Dexamples='multi_process/client_server_mp/mp_server,multi_process/client_server_mp/mp_client,multi_process/simple_mp,multi_process/symmetric_mp'"
+ self.dut.build_install_dpdk(target=self.target, extra_options=extra_option)
+ self.app_mp_client = self.dut.apps_name["mp_client"]
+ self.app_mp_server = self.dut.apps_name["mp_server"]
+ self.app_simple_mp = self.dut.apps_name["simple_mp"]
+ self.app_symmetric_mp = self.dut.apps_name["symmetric_mp"]
+
+ executions.append({"nprocs": 1, "cores": "1S/1C/1T", "pps": 0})
+ executions.append({"nprocs": 2, "cores": "1S/1C/2T", "pps": 0})
+ executions.append({"nprocs": 2, "cores": "1S/2C/1T", "pps": 0})
+ executions.append({"nprocs": 4, "cores": "1S/2C/2T", "pps": 0})
+ executions.append({"nprocs": 4, "cores": "1S/4C/1T", "pps": 0})
+ executions.append({"nprocs": 8, "cores": "1S/4C/2T", "pps": 0})
+
+ self.eal_param = ""
+ for i in self.dut_ports:
+ self.eal_param += " -a %s" % self.dut.ports_info[i]["pci"]
+
+ self.eal_para = self.dut.create_eal_parameters(cores="1S/2C/1T")
+ # start new session to run secondary
+ self.session_secondary = self.dut.new_session()
+
+ # get dts output path
+ if self.logger.log_path.startswith(os.sep):
+ self.output_path = self.logger.log_path
+ else:
+ cur_path = os.path.dirname(os.path.dirname(os.path.realpath(__file__)))
+ self.output_path = os.sep.join([cur_path, self.logger.log_path])
+ # create an instance to set stream field setting
+ self.pktgen_helper = PacketGeneratorHelper()
+ self.dport_info0 = self.dut.ports_info[self.dut_ports[0]]
+ self.pci0 = self.dport_info0["pci"]
+ self.tester_ifaces = [
+ self.tester.get_interface(self.dut.ports_map[port])
+ for port in self.dut_ports
+ ]
+ self.rxq = 1
+ self.session_list = []
+ self.logfmt = "*" * 20
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def launch_multi_testpmd(self, proc_type, queue_num, process_num, **kwargs):
+ self.session_list = [
+ self.dut.new_session("process_{}".format(i)) for i in range(process_num)
+ ]
+ self.pmd_output_list = [
+ PmdOutput(self.dut, self.session_list[i]) for i in range(process_num)
+ ]
+ self.dut.init_reserved_core()
+ proc_type_list = []
+ self.out_list = []
+ if isinstance(proc_type, list):
+ proc_type_list = copy.deepcopy(proc_type)
+ proc_type = proc_type_list[0]
+ for i in range(process_num):
+ cores = self.dut.get_reserved_core("2C", socket=0)
+ if i != 0 and proc_type_list:
+ proc_type = proc_type_list[1]
+ eal_param = "--proc-type={} -a {} --log-level=ice,7".format(
+ proc_type, self.pci0
+ )
+ param = "--rxq={0} --txq={0} --num-procs={1} --proc-id={2}".format(
+ queue_num, process_num, i
+ )
+ if kwargs.get("options") is not None:
+ param = "".join([param, kwargs.get("options")])
+ out = self.pmd_output_list[i].start_testpmd(
+ cores=cores,
+ eal_param=eal_param,
+ param=param,
+ timeout=kwargs.get("timeout", 20),
+ )
+ self.out_list.append(out)
+ self.pmd_output_list[i].execute_cmd("set fwd rxonly")
+ self.pmd_output_list[i].execute_cmd("set verbose 1")
+ self.pmd_output_list[i].execute_cmd("start")
+ self.pmd_output_list[i].execute_cmd("clear port stats all")
+
+ def get_pkt_statistic_process(self, out, **kwargs):
+ """
+ :param out: information received by testpmd process after sending packets and port statistics
+ :return: forward statistic dict, eg: {'rx-packets':1, 'tx-packets:0, 'tx-dropped':1}
+ """
+ p = re.compile(
+ r"Forward\s+Stats\s+for\s+RX\s+Port=\s+{}/Queue=([\s\d+]\d+)\s+.*\n.*RX-packets:\s+(\d+)\s+TX-packets:\s+(\d+)\s+TX-dropped:\s+(\d+)\s".format(
+ kwargs.get("port_id")
+ )
+ )
+ item_name = ["rx-packets", "tx-packets", "tx-dropped"]
+ statistic = p.findall(out)
+ if statistic:
+ rx_pkt_total, tx_pkt_total, tx_drop_total = 0, 0, 0
+ queue_set = set()
+ for item in statistic:
+ queue, rx_pkt, tx_pkt, tx_drop = map(int, item)
+ queue_set.add(queue)
+ rx_pkt_total += rx_pkt
+ tx_pkt_total += tx_pkt
+ tx_drop_total += tx_drop
+ static_dict = {
+ k: v
+ for k, v in zip(item_name, [rx_pkt_total, tx_pkt_total, tx_drop_total])
+ }
+ static_dict["queue"] = queue_set
+ return static_dict
+ else:
+ raise Exception("got wrong output, not match pattern {}".format(p.pattern))
+
+ def random_packet(self, pkt_num):
+ pkt = Packet()
+ pkt.generate_random_pkts(
+ pktnum=pkt_num,
+ dstmac="00:11:22:33:44:55",
+ )
+ pkt.send_pkt(crb=self.tester, tx_port=self.tester_ifaces[0], count=1)
+
+ def specify_packet(self, que_num):
+ # create rule to set queue as one of each process queues
+ rule_str = "flow create 0 ingress pattern eth / ipv4 src is 192.168.{0}.3 / end actions queue index {0} / end"
+ rules = [rule_str.format(i) for i in range(que_num)]
+ fdirprocess(
+ self, self.pmd_output_list[0], self.tester_ifaces, rxq=que_num
+ ).create_rule(rules)
+ # send 1 packet for each queue,the number of packets should be received by each process is (queue_num/proc_num)
+ pkt = Packet()
+ pkt_num = que_num
+ self.logger.info("packet num:{}".format(pkt_num))
+ packets = [
+ 'Ether(dst="00:11:22:33:44:55") / IP(src="192.168.{0}.3", dst="192.168.0.21") / Raw("x" * 80)'.format(
+ i
+ )
+ for i in range(pkt_num)
+ ]
+ pkt.update_pkt(packets)
+ pkt.send_pkt(crb=self.tester, tx_port=self.tester_ifaces[0], count=1)
+
+ def _multiprocess_data_pass(self, case):
+ que_num, proc_num = case.get("queue_num"), case.get("proc_num")
+ pkt_num = case.setdefault("pkt_num", que_num)
+ step = int(que_num / proc_num)
+ proc_queue = [set(range(i, i + step)) for i in range(0, que_num, step)]
+ queue_dict = {
+ k: v
+ for k, v in zip(
+ ["process_{}".format(i) for i in range(que_num)], proc_queue
+ )
+ }
+ # start testpmd multi-process
+ self.launch_multi_testpmd(
+ proc_type=case.get("proc_type"), queue_num=que_num, process_num=proc_num
+ )
+ # send random or specify packets
+ packet_func = getattr(self, case.get("packet_type") + "_packet")
+ packet_func(pkt_num)
+ # get output for each process
+ process_static = {}
+ for i in range(len(self.pmd_output_list)):
+ out = self.pmd_output_list[i].execute_cmd("stop")
+ static = self.get_pkt_statistic_process(out, port_id=0)
+ process_static["process_{}".format(i)] = static
+ self.logger.info("process output static:{}".format(process_static))
+ # check whether each process receives packet, and ecah process receives packets with the corresponding queue
+ for k, v in process_static.items():
+ self.verify(
+ v.get("rx-packets") > 0,
+ "fail:process:{} does not receive packet".format(k),
+ )
+ self.verify(
+ v.get("queue").issubset(queue_dict.get(k)),
+ "fail: {} is not a subset of {}, "
+ "process should use its own queues".format(
+ v.get("queue"), queue_dict.get(k)
+ ),
+ )
+ self.logger.info("pass:each process receives packets and uses its own queue")
+ # check whether the sum of packets received by all processes is equal to the number of packets sent
+ received_pkts = sum(
+ int(v.get("rx-packets", 0)) for v in process_static.values()
+ )
+ self.verify(
+ received_pkts == pkt_num,
+ "the number of packets received is not equal to packets sent,"
+ "send packet:{}, received packet:{}".format(pkt_num, received_pkts),
+ )
+ self.logger.info(
+ "pass:the number of packets received is {}, equal to packets sent".format(
+ received_pkts
+ )
+ )
+
+ def check_rss(self, out, **kwargs):
+ """
+ check whether the packet directed by rss or not according to the specified parameters
+ :param out: information received by testpmd after sending packets and port statistics
+ :param kwargs: some specified parameters, such as: rxq, stats
+ :return: queue value list
+ usage:
+ check_rss(out, rxq=rxq, stats=stats)
+ """
+ self.logger.info("{0} check rss {0}".format(self.logfmt))
+ rxq = kwargs.get("rxq")
+ p = re.compile("RSS\shash=(\w+)\s-\sRSS\squeue=(\w+)")
+ pkt_info = p.findall(out)
+ self.verify(
+ pkt_info,
+ "no information matching the pattern was found,pattern:{}".format(
+ p.pattern
+ ),
+ )
+ pkt_queue = set([int(i[1], 16) for i in pkt_info])
+ if kwargs.get("stats"):
+ self.verify(
+ all([int(i[0], 16) % rxq == int(i[1], 16) for i in pkt_info]),
+ "some pkt not directed by rss.",
+ )
+ self.logger.info((GREEN("pass: all pkts directed by rss")))
+ else:
+ self.verify(
+ not any([int(i[0], 16) % rxq == int(i[1], 16) for i in pkt_info]),
+ "some pkt directed by rss, expect not directed by rss",
+ )
+ self.logger.info((GREEN("pass: no pkt directed by rss")))
+ return pkt_queue
+
+ def check_mark_id(self, out, check_param, **kwargs):
+ """
+ verify that the mark ID matches the expected value
+ :param out: information received by testpmd after sending packets
+ :param check_param: check item name and value, eg
+ "check_param": {"port_id": 0, "mark_id": 1}
+ :param kwargs: some specified parameters,eg: stats
+ :return: None
+ usage:
+ check_mark_id(out, check_param, stats=stats)
+ """
+ self.logger.info("{0} check mark id {0}".format(self.logfmt))
+ fdir_scanner = re.compile("FDIR matched ID=(0x\w+)")
+ all_mark = fdir_scanner.findall(out)
+ stats = kwargs.get("stats")
+ if stats:
+ mark_list = set(int(i, 16) for i in all_mark)
+ self.verify(
+ all([i == check_param["mark_id"] for i in mark_list]) and mark_list,
+ "failed: some packet mark id of {} not match expect {}".format(
+ mark_list, check_param["mark_id"]
+ ),
+ )
+ self.logger.info((GREEN("pass: all packets mark id are matched ")))
+ else:
+ # for mismatch packet,verify no mark id in output of received packet
+ self.verify(
+ not all_mark, "mark id {} in output, expect no mark id".format(all_mark)
+ )
+ self.logger.info((GREEN("pass: no mark id in output")))
+
+ def check_drop(self, out, **kwargs):
+ """
+ check the drop number of packets according to the specified parameters
+ :param out: information received by testpmd after sending packets and port statistics
+ :param kwargs: some specified parameters, such as: pkt_num, port_id, stats
+ :return: None
+ usage:
+ chek_drop(out, pkt_num=pkt_num, port_id=portid, stats=stats)
+ """
+ self.logger.info("{0} check drop {0}".format(self.logfmt))
+ pkt_num = kwargs.get("pkt_num")
+ stats = kwargs.get("stats")
+ res = self.get_pkt_statistic(out, **kwargs)
+ self.verify(
+ pkt_num == res["rx-total"],
+ "failed: get wrong amount of packet {}, expected {}".format(
+ res["rx-total"], pkt_num
+ ),
+ )
+ drop_packet_num = res["rx-dropped"]
+ if stats:
+ self.verify(
+ drop_packet_num == pkt_num,
+ "failed: {} packet dropped,expect {} dropped".format(
+ drop_packet_num, pkt_num
+ ),
+ )
+ self.logger.info(
+ (
+ GREEN(
+ "pass: drop packet number {} is matched".format(drop_packet_num)
+ )
+ )
+ )
+ else:
+ self.verify(
+ drop_packet_num == 0 and res["rx-packets"] == pkt_num,
+ "failed: {} packet dropped, expect 0 packet dropped".format(
+ drop_packet_num
+ ),
+ )
+ self.logger.info(
+ (
+ GREEN(
+ "pass: drop packet number {} is matched".format(drop_packet_num)
+ )
+ )
+ )
+
+ @staticmethod
+ def get_pkt_statistic(out, **kwargs):
+ """
+ :param out: information received by testpmd after sending packets and port statistics
+ :return: rx statistic dict, eg: {'rx-packets':1, 'rx-dropped':0, 'rx-total':1}
+ """
+ p = re.compile(
+ r"Forward\sstatistics\s+for\s+port\s+{}\s+.*\n.*RX-packets:\s(\d+)\s+RX-dropped:\s(\d+)\s+RX-total:\s(\d+)\s".format(
+ kwargs.get("port_id")
+ )
+ )
+ item_name = ["rx-packets", "rx-dropped", "rx-total"]
+ statistic = p.findall(out)
+ if statistic:
+ static_dict = {
+ k: v for k, v in zip(item_name, list(map(int, list(statistic[0]))))
+ }
+ return static_dict
+ else:
+ raise Exception(
+ "got wrong output, not match pattern {}".format(p.pattern).replace(
+ "\\\\", "\\"
+ )
+ )
+
+ def send_pkt_get_output(
+ self, instance_obj, pkts, port_id=0, count=1, interval=0, get_stats=False
+ ):
+ instance_obj.pmd_output.execute_cmd("clear port stats all")
+ tx_port = self.tester_ifaces[port_id]
+ self.logger.info("----------send packet-------------")
+ self.logger.info("{}".format(pkts))
+ if not isinstance(pkts, list):
+ pkts = [pkts]
+ self.pkt.update_pkt(pkts)
+ self.pkt.send_pkt(
+ crb=self.tester,
+ tx_port=tx_port,
+ count=count,
+ interval=interval,
+ )
+ out1 = instance_obj.pmd_output.get_output(timeout=1)
+ if get_stats:
+ out2 = instance_obj.pmd_output.execute_cmd("show port stats all")
+ instance_obj.pmd_output.execute_cmd("stop")
+ else:
+ out2 = instance_obj.pmd_output.execute_cmd("stop")
+ instance_obj.pmd_output.execute_cmd("start")
+ return "".join([out1, out2])
+
+ def check_pkt_num(self, out, **kwargs):
+ """
+ check number of received packets matches the expected value
+ :param out: information received by testpmd after sending packets and port statistics
+ :param kwargs: some specified parameters, such as: pkt_num, port_id
+ :return: rx statistic dict
+ """
+ self.logger.info(
+ "{0} check pkt num for port:{1} {0}".format(
+ self.logfmt, kwargs.get("port_id")
+ )
+ )
+ pkt_num = kwargs.get("pkt_num")
+ res = self.get_pkt_statistic(out, **kwargs)
+ res_num = res["rx-total"]
+ self.verify(
+ res_num == pkt_num,
+ "fail: got wrong number of packets, expect pakcet number {}, got {}".format(
+ pkt_num, res_num
+ ),
+ )
+ self.logger.info(
+ (GREEN("pass: pkt num is {} same as expected".format(pkt_num)))
+ )
+ return res
+
+ def check_queue(self, out, check_param, **kwargs):
+ """
+ verify that queue value matches the expected value
+ :param out: information received by testpmd after sending packets and port statistics
+ :param check_param: check item name and value, eg
+ "check_param": {"port_id": 0, "queue": 2}
+ :param kwargs: some specified parameters, such as: pkt_num, port_id, stats
+ :return:
+ """
+ self.logger.info("{0} check queue {0}".format(self.logfmt))
+ queue = check_param["queue"]
+ if isinstance(check_param["queue"], int):
+ queue = [queue]
+ patt = re.compile(
+ r"port\s+{}/queue(.+?):\s+received\s+(\d+)\s+packets".format(
+ kwargs.get("port_id")
+ )
+ )
+ res = patt.findall(out)
+ if res:
+ pkt_queue = set([int(i[0]) for i in res])
+ if kwargs.get("stats"):
+ self.verify(
+ all(q in queue for q in pkt_queue),
+ "fail: queue id not matched, expect queue {}, got {}".format(
+ queue, pkt_queue
+ ),
+ )
+ self.logger.info((GREEN("pass: queue id {} matched".format(pkt_queue))))
+ else:
+ try:
+ self.verify(
+ not any(q in queue for q in pkt_queue),
+ "fail: queue id should not matched, {} should not in {}".format(
+ pkt_queue, queue
+ ),
+ )
+ self.logger.info(
+ (GREEN("pass: queue id {} not matched".format(pkt_queue)))
+ )
+ except VerifyFailure:
+ self.logger.info(
+ "queue id {} contains the queue {} specified in rule, so need to check"
+ " whether the packet directed by rss or not".format(
+ pkt_queue, queue
+ )
+ )
+ # for mismatch packet the 'stats' parameter is False, need to change to True
+ kwargs["stats"] = True
+ self.check_rss(out, **kwargs)
+
+ else:
+ raise Exception("got wrong output, not match pattern")
+
+ def check_with_param(self, out, pkt_num, check_param, stats=True):
+ """
+ according to the key and value of the check parameter,
+ perform the corresponding verification in the out information
+ :param out: information received by testpmd after sending packets and port statistics
+ :param pkt_num: number of packets sent
+ :param check_param: check item name and value, eg:
+ "check_param": {"port_id": 0, "mark_id": 1, "queue": 1}
+ "check_param": {"port_id": 0, "drop": 1}
+ :param stats: effective status of rule, True or False, default is True
+ :return:
+ usage:
+ check_with_param(out, pkt_num, check_param, stats)
+ check_with_param(out, pkt_num, check_param=check_param)
+ """
+ rxq = check_param.get("rxq")
+ port_id = (
+ check_param["port_id"] if check_param.get("port_id") is not None else 0
+ )
+ match_flag = True
+ """
+ check_dict shows the supported check items,the key is item name and value represent the check priority,
+ the smaller the value, the higher the priority, priority default value is 999. if need to add new check item,
+ please add it to the dict and implement the corresponding method and named as 'check_itemname',eg: check_queue
+ """
+ self.matched_queue = []
+ default_pri = 999
+ check_dict = {
+ "queue": default_pri,
+ "drop": default_pri,
+ "mark_id": 1,
+ "rss": default_pri,
+ }
+ params = {"port_id": port_id, "rxq": rxq, "pkt_num": pkt_num, "stats": stats}
+ # sort check_param order by priority, from high to low, set priority as 999 if key not in check_dict
+ check_param = OrderedDict(
+ sorted(
+ check_param.items(),
+ key=lambda item: check_dict.get(item[0], default_pri),
+ )
+ )
+ if not check_param.get("drop"):
+ self.check_pkt_num(out, **params)
+ for k in check_param:
+ parameter = copy.deepcopy(params)
+ if k not in check_dict:
+ continue
+ func_name = "check_{}".format(k)
+ try:
+ func = getattr(self, func_name)
+ except AttributeError:
+ emsg = "{},this func is not implemented, please check!".format(
+ traceback.format_exc()
+ )
+ raise Exception(emsg)
+ else:
+ # for mismatch packet, if the check item is 'rss',should also verify the packets are distributed by rss
+ if k == "rss" and not stats:
+ parameter["stats"] = True
+ match_flag = False
+ res = func(out=out, check_param=check_param, **parameter)
+ if k == "rss" and match_flag:
+ self.matched_queue.append(res)
+
+ def destroy_rule(self, instance_obj, port_id=0, rule_id=None):
+ rule_id = 0 if rule_id is None else rule_id
+ if not isinstance(rule_id, list):
+ rule_id = [rule_id]
+ for i in rule_id:
+ out = instance_obj.pmd_output.execute_cmd(
+ "flow destroy {} rule {}".format(port_id, i)
+ )
+ p = re.compile(r"Flow rule #(\d+) destroyed")
+ m = p.search(out)
+ self.verify(m, "flow rule {} delete failed".format(rule_id))
+
+ def multiprocess_flow_data(self, case, **pmd_param):
+ que_num, proc_num = pmd_param.get("queue_num"), pmd_param.get("proc_num")
+ # start testpmd multi-process
+ self.launch_multi_testpmd(
+ proc_type=pmd_param.get("proc_type"),
+ queue_num=que_num,
+ process_num=proc_num,
+ )
+ self.pmd_output_list[0].execute_cmd("flow flush 0")
+ check_param = case["check_param"]
+ check_param["rxq"] = pmd_param.get("queue_num")
+ if check_param.get("rss"):
+ [pmd.execute_cmd("port config all rss all") for pmd in self.pmd_output_list]
+ fdir_pro = fdirprocess(
+ self,
+ self.pmd_output_list[0],
+ self.tester_ifaces,
+ rxq=pmd_param.get("queue_num"),
+ )
+ fdir_pro.create_rule(case.get("rule"))
+ # send match and mismatch packet
+ packets = [case.get("packet")["match"], case.get("packet")["mismatch"]]
+ for i in range(2):
+ out1 = self.send_pkt_get_output(fdir_pro, packets[i])
+ patt = re.compile(
+ r"port\s+{}/queue(.+?):\s+received\s+(\d+)\s+packets".format(
+ check_param.get("port_id")
+ )
+ )
+ if patt.findall(out1) and check_param.get("rss"):
+ self.logger.info(
+ "check whether the packets received by the primary process are distributed by RSS"
+ )
+ self.check_rss(out1, stats=True, **check_param)
+ for proc_pmd in self.pmd_output_list[1:]:
+ out2 = proc_pmd.get_output(timeout=1)
+ out3 = proc_pmd.execute_cmd("stop")
+ out1 = "".join([out1, out2, out3])
+ proc_pmd.execute_cmd("start")
+ if patt.findall(out2) and check_param.get("rss"):
+ self.logger.info(
+ "check whether the packets received by the secondary process are distributed by RSS"
+ )
+ self.check_rss(out2, stats=True, **check_param)
+ pkt_num = len(packets[i])
+ self.check_with_param(
+ out1,
+ pkt_num=pkt_num,
+ check_param=check_param,
+ stats=True if i == 0 else False,
+ )
+
+ def _handle_test(self, tests, instance_obj, port_id=0):
+ for test in tests:
+ if "send_packet" in test:
+ out = self.send_pkt_get_output(
+ instance_obj, test["send_packet"], port_id
+ )
+ for proc_pmd in self.pmd_output_list[1:]:
+ out1 = proc_pmd.get_output(timeout=1)
+ out = "".join([out, out1])
+ if "action" in test:
+ instance_obj.handle_actions(out, test["action"])
+
+ def multiprocess_rss_data(self, case, **pmd_param):
+ que_num, proc_num = pmd_param.get("queue_num"), pmd_param.get("proc_num")
+ # start testpmd multi-process
+ self.launch_multi_testpmd(
+ proc_type=pmd_param.get("proc_type"),
+ queue_num=que_num,
+ process_num=proc_num,
+ options=pmd_param.get("options", None),
+ )
+ self.pmd_output_list[0].execute_cmd("flow flush 0")
+ rss_pro = rssprocess(
+ self,
+ self.pmd_output_list[0],
+ self.tester_ifaces,
+ rxq=pmd_param.get("queue_num"),
+ )
+ rss_pro.error_msgs = []
+ # handle tests
+ tests = case["test"]
+ port_id = case["port_id"]
+ self.logger.info("------------handle test--------------")
+ # validate rule
+ rule = case.get("rule", None)
+ if rule:
+ rss_pro.validate_rule(rule=rule)
+ rule_ids = rss_pro.create_rule(rule=rule)
+ rss_pro.check_rule(rule_list=rule_ids)
+ self._handle_test(tests, rss_pro, port_id)
+ # handle post-test
+ if "post-test" in case:
+ self.logger.info("------------handle post-test--------------")
+ self.destroy_rule(rss_pro, port_id=port_id, rule_id=rule_ids)
+ rss_pro.check_rule(port_id=port_id, stats=False)
+ self._handle_test(case["post-test"], rss_pro, port_id)
+
+ if rss_pro.error_msgs:
+ self.verify(
+ False,
+ " ".join([errs.replace("'", " ") for errs in rss_pro.error_msgs[:500]]),
+ )
+
+ def rte_flow(self, case_list, func_name, **kwargs):
+ """
+ main flow of case:
+ 1. iterate the case list and do the below steps:
+ a. get the subcase name and init dict to save result
+ b. call method by func name to execute case step
+ c. record case result and err msg if case failed
+ d. clear flow rule
+ 2. calculate the case passing rate according to the result dict
+ 3. record case result and pass rate in the case log file
+ 4. verify whether the case pass rate is equal to 100, if not, mark the case as failed and raise the err msg
+ :param case_list: case list, each item is a subcase of case
+ :param func_name: hadle case method name, eg:
+ 'flow_rule_operate': a method of 'FlowRuleProcessing' class,
+ used to handle flow rule related suites,such as fdir and switch_filter
+ 'handle_rss_distribute_cases': a method of 'RssProcessing' class,
+ used to handle rss related suites
+ :return:
+ usage:
+ for flow rule related:
+ rte_flow(caselist, flow_rule_operate)
+ for rss related:
+ rte_flow(caselist, handle_rss_distribute_cases)
+ """
+ if not isinstance(case_list, list):
+ case_list = [case_list]
+ test_results = dict()
+ for case in case_list:
+ case_name = case.get("sub_casename")
+ test_results[case_name] = {}
+ try:
+ self.logger.info("{0} case_name:{1} {0}".format("*" * 20, case_name))
+ func_name(case, **kwargs)
+ except Exception:
+ test_results[case_name]["result"] = "failed"
+ test_results[case_name]["err"] = re.sub(
+ r"['\r\n]", "", str(traceback.format_exc(limit=1))
+ ).replace("\\\\", "\\")
+ self.logger.info(
+ (
+ RED(
+ "case failed:{}, err:{}".format(
+ case_name, traceback.format_exc()
+ )
+ )
+ )
+ )
+ else:
+ test_results[case_name]["result"] = "passed"
+ self.logger.info((GREEN("case passed: {}".format(case_name))))
+ finally:
+ self.pmd_output_list[0].execute_cmd("flow flush 0")
+ for sess in self.session_list:
+ self.dut.close_session(sess)
+ pass_rate = (
+ round(
+ sum(1 for k in test_results if "passed" in test_results[k]["result"])
+ / len(test_results),
+ 4,
+ )
+ * 100
+ )
+ self.logger.info(
+ [
+ "{}:{}".format(sub_name, test_results[sub_name]["result"])
+ for sub_name in test_results
+ ]
+ )
+ self.logger.info("pass rate is: {}".format(pass_rate))
+ msg = [
+ "subcase_name:{}:{},err:{}".format(
+ name, test_results[name].get("result"), test_results[name].get("err")
+ )
+ for name in test_results.keys()
+ if "failed" in test_results[name]["result"]
+ ]
+ self.verify(
+ int(pass_rate) == 100,
+ "some subcases failed, detail as below:{}".format(msg),
+ )
+
+ def test_multiprocess_simple_mpbasicoperation(self):
+ """
+ Basic operation.
+ """
+ # Send message from secondary to primary
+ cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
+ coremask = utils.create_mask(cores)
+ self.dut.send_expect(
+ self.app_simple_mp + " %s --proc-type=primary" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ time.sleep(20)
+ coremask = hex(int(coremask, 16) * 0x10).rstrip("L")
+ self.session_secondary.send_expect(
+ self.app_simple_mp + " %s --proc-type=secondary" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+
+ self.session_secondary.send_expect("send hello_primary", ">")
+ out = self.dut.get_session_output()
+ self.session_secondary.send_expect("quit", "# ")
+ self.dut.send_expect("quit", "# ")
+ self.verify(
+ "Received 'hello_primary'" in out, "Message not received on primary process"
+ )
+ # Send message from primary to secondary
+ cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
+ coremask = utils.create_mask(cores)
+ self.session_secondary.send_expect(
+ self.app_simple_mp + " %s --proc-type=primary " % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ time.sleep(20)
+ coremask = hex(int(coremask, 16) * 0x10).rstrip("L")
+ self.dut.send_expect(
+ self.app_simple_mp + " %s --proc-type=secondary" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ self.session_secondary.send_expect("send hello_secondary", ">")
+ out = self.dut.get_session_output()
+ self.session_secondary.send_expect("quit", "# ")
+ self.dut.send_expect("quit", "# ")
+
+ self.verify(
+ "Received 'hello_secondary'" in out,
+ "Message not received on primary process",
+ )
+
+ def test_multiprocess_simple_mploadtest(self):
+ """
+ Load test of Simple MP application.
+ """
+
+ cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
+ coremask = utils.create_mask(cores)
+ self.session_secondary.send_expect(
+ self.app_simple_mp + " %s --proc-type=primary" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ time.sleep(20)
+ coremask = hex(int(coremask, 16) * 0x10).rstrip("L")
+ self.dut.send_expect(
+ self.app_simple_mp + " %s --proc-type=secondary" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ stringsSent = 0
+ for line in open("/usr/share/dict/words", "r").readlines():
+ line = line.split("\n")[0]
+ self.dut.send_expect("send %s" % line, ">")
+ stringsSent += 1
+ if stringsSent == 3:
+ break
+
+ time.sleep(5)
+ self.dut.send_expect("quit", "# ")
+ self.session_secondary.send_expect("quit", "# ")
+
+ def test_multiprocess_simple_mpapplicationstartup(self):
+ """
+ Test use of Auto for Application Startup.
+ """
+
+ # Send message from secondary to primary (auto process type)
+ cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
+ coremask = utils.create_mask(cores)
+ out = self.dut.send_expect(
+ self.app_simple_mp + " %s --proc-type=auto " % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ self.verify(
+ "EAL: Auto-detected process type: PRIMARY" in out,
+ "The type of process (PRIMARY) was not detected properly",
+ )
+ time.sleep(20)
+ coremask = hex(int(coremask, 16) * 0x10).rstrip("L")
+ out = self.session_secondary.send_expect(
+ self.app_simple_mp + " %s --proc-type=auto" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ self.verify(
+ "EAL: Auto-detected process type: SECONDARY" in out,
+ "The type of process (SECONDARY) was not detected properly",
+ )
+
+ self.session_secondary.send_expect("send hello_primary", ">")
+ out = self.dut.get_session_output()
+ self.session_secondary.send_expect("quit", "# ")
+ self.dut.send_expect("quit", "# ")
+ self.verify(
+ "Received 'hello_primary'" in out, "Message not received on primary process"
+ )
+
+ # Send message from primary to secondary (auto process type)
+ cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
+ coremask = utils.create_mask(cores)
+ out = self.session_secondary.send_expect(
+ self.app_simple_mp + " %s --proc-type=auto" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ self.verify(
+ "EAL: Auto-detected process type: PRIMARY" in out,
+ "The type of process (PRIMARY) was not detected properly",
+ )
+ time.sleep(20)
+ coremask = hex(int(coremask, 16) * 0x10).rstrip("L")
+ out = self.dut.send_expect(
+ self.app_simple_mp + " %s --proc-type=auto" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ self.verify(
+ "EAL: Auto-detected process type: SECONDARY" in out,
+ "The type of process (SECONDARY) was not detected properly",
+ )
+ self.session_secondary.send_expect("send hello_secondary", ">", 100)
+ out = self.dut.get_session_output()
+ self.session_secondary.send_expect("quit", "# ")
+ self.dut.send_expect("quit", "# ")
+
+ self.verify(
+ "Received 'hello_secondary'" in out,
+ "Message not received on primary process",
+ )
+
+ def test_multiprocess_simple_mpnoflag(self):
+ """
+ Multiple processes without "--proc-type" flag.
+ """
+
+ cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
+ coremask = utils.create_mask(cores)
+ self.session_secondary.send_expect(
+ self.app_simple_mp + " %s -m 64" % (self.eal_para),
+ "Finished Process Init",
+ 100,
+ )
+ coremask = hex(int(coremask, 16) * 0x10).rstrip("L")
+ out = self.dut.send_expect(
+ self.app_simple_mp + " %s" % (self.eal_para), "# ", 100
+ )
+
+ self.verify(
+ "Is another primary process running" in out,
+ "No other primary process detected",
+ )
+
+ self.session_secondary.send_expect("quit", "# ")
+
+ def test_multiprocess_symmetric_mp_packet(self):
+ # run multiple symmetric_mp process
+ portMask = utils.create_mask(self.dut_ports)
+ # launch symmetric_mp, process num is 2
+ proc_num = 2
+ session_list = [
+ self.dut.new_session("process_{}".format(i)) for i in range(proc_num)
+ ]
+ for i in range(proc_num):
+ session_list[i].send_expect(
+ self.app_symmetric_mp
+ + " -l {} -n 4 --proc-type=auto {} -- -p {} --num-procs={} --proc-id={}".format(
+ i + 1, self.eal_param, portMask, proc_num, i
+ ),
+ "Finished Process Init",
+ )
+ # send packets
+ packet_num = random.randint(20, 256)
+ self.logger.info("packet num:{}".format(packet_num))
+ self.random_packet(packet_num)
+ res = []
+ for session_obj in session_list:
+ try:
+ out = session_obj.send_command("^C")
+ except Exception as e:
+ self.logger.err("Error occured:{}".format(traceback.format_exc(e)))
+ finally:
+ session_obj.close()
+ rx_num = re.search(r"Port 0: RX - (?P<RX>\d+)", out)
+ rx_nums = int(rx_num.group("RX"))
+ self.verify(
+ rx_nums > 0,
+ "fail: {} received packets shoud greater than 0, actual is {}".format(
+ session_obj.name, rx_nums
+ ),
+ )
+ res.append(rx_nums)
+ rx_total = sum(res)
+ self.logger.info("RX total:{}, send packet:{}".format(rx_total, packet_num))
+ self.verify(
+ rx_total >= packet_num,
+ "some packet not received by symmetric_mp, "
+ "number of RX total should greater than or equal to send packet",
+ )
+
+ def test_multiprocess_server_client_mp_packet(self):
+ # run multiple client_server_mp process
+ portMask = utils.create_mask(self.dut_ports)
+ # launch client_server_mp, client process num is 2
+ proc_num = 2
+ session_list = [
+ self.dut.new_session("process_{}".format(i)) for i in range(proc_num + 1)
+ ]
+ server_session = session_list[-1]
+ # start server
+ server_session.send_expect(
+ self.app_mp_server
+ + " -l 1,2 -n 4 -- -p {} -n {}".format(portMask, proc_num),
+ "Finished Process Init",
+ )
+ # start client
+ for i in range(proc_num):
+ self.dut.init_reserved_core()
+ session_list[i].send_expect(
+ self.app_mp_client
+ + " -l {} -n 4 --proc-type=auto -- -n {}".format(i + 3, i),
+ "Finished Process Init",
+ )
+ # send packets
+ packet_num = random.randint(20, 256)
+ self.logger.info("packet num:{}".format(packet_num))
+ self.random_packet(packet_num)
+ out = server_session.get_session_before(timeout=5)
+ for session_obj in session_list:
+ try:
+ session_obj.send_command("^C")
+ except Exception as e:
+ self.logger.err("Error occured:{}".format(traceback.format_exc(e)))
+ finally:
+ session_obj.close()
+ res = re.search(
+ r"Port \d+\s+-\s+rx:\s+(?P<rx>\d+)\s+tx:.*PORTS", out, re.DOTALL
+ )
+ rx_num = re.findall(r"Client\s+\d\s+-\s+rx:\s+(\d+)", res.group(0))
+ for i in range(proc_num):
+ self.verify(
+ int(rx_num[i]) > 0,
+ "fail: client_{} received packets shoud greater than 0, "
+ "actual is {}".format(i, int(rx_num[i])),
+ )
+ rx_total = sum(int(rx) for rx in rx_num)
+ self.logger.info("rx total:{}, send packet:{}".format(rx_total, packet_num))
+ self.verify(
+ rx_total >= packet_num,
+ "some packet not received by server_client process,"
+ "number of RX total should greater than or equal to send packet.",
+ )
+
+ # test testpmd multi-process
+ @check_supported_nic(support_nic)
+ def test_multiprocess_auto_process_type_detected(self):
+ # start 2 process
+ self.launch_multi_testpmd("auto", 8, 2)
+ # get output of each process and check the detected process type is correctly
+ process_type = ["PRIMARY", "SECONDARY"]
+ for i in range(2):
+ self.verify(
+ "Auto-detected process type: {}".format(process_type[i])
+ in self.out_list[i],
+ "the process type is not correctly, expect {}".format(process_type[i]),
+ )
+ self.logger.info(
+ "pass: Auto-detected {} process type correctly".format(process_type[i])
+ )
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_negative_2_primary_process(self):
+ # start 2 primary process
+ try:
+ self.launch_multi_testpmd(["primary", "primary"], 8, 2, timeout=10)
+ except Exception as e:
+ # check second process start failed
+ self.verify(
+ "Is another primary process running?" in e.output,
+ "fail: More than one primary process was started, only one should be started!",
+ )
+ self.logger.info(
+ "pass: only one primary process start successfully, match the expect"
+ )
+ return
+ self.verify(False, "fail: 2 primary process launch succeed, expect launch fail")
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_negative_exceed_process_num(self):
+ """
+ If the specified number of processes is exceeded, starting the process will fail
+ """
+ # start 2 process
+ proc_type, queue_num, process_num = "auto", 8, 2
+ self.launch_multi_testpmd(proc_type, queue_num, process_num)
+ # start a process with 'proc-id=2', should start failed
+ pmd_2 = PmdOutput(self.dut, self.dut.new_session("process_2"))
+ self.dut.init_reserved_core()
+ cores = self.dut.get_reserved_core("2C", socket=1)
+ eal_param = "--proc-type={} -a {} --log-level=ice,7".format("auto", self.pci0)
+ param = "--rxq={0} --txq={0} --num-procs={1} --proc-id={2}".format(
+ queue_num, process_num, 2
+ )
+ try:
+ pmd_2.start_testpmd(
+ cores=cores, eal_param=eal_param, param=param, timeout=10
+ )
+ except Exception as e:
+ p = re.compile(
+ r"The\s+multi-process\s+option\s+'proc-id\(\d+\)'\s+should\s+be\s+less\s+than\s+'num-procs\(\d+\)'"
+ )
+ res = p.search(e.output)
+ self.verify(
+ res,
+ "fail: 'multi-process proc-id should be less than num-process' should in output",
+ )
+ self.logger.info(
+ "pass: exceed the specified number, process launch failed as expected"
+ )
+ return
+ self.verify(
+ False,
+ "fail: exceed the specified number, process launch succeed, expect launch fail",
+ )
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_proc_type_random_packet(self):
+ case_list = [
+ {
+ "sub_casename": "proc_type_auto_4_process",
+ "queue_num": 16,
+ "proc_num": 4,
+ "proc_type": "auto",
+ "packet_type": "random",
+ "pkt_num": 30,
+ },
+ {
+ "sub_casename": "proc_type_primary_secondary_2_process",
+ "queue_num": 4,
+ "proc_num": 2,
+ "proc_type": ["primary", "secondary"],
+ "packet_type": "random",
+ "pkt_num": 20,
+ },
+ ]
+ self.rte_flow(case_list, self._multiprocess_data_pass)
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_proc_type_specify_packet(self):
+ case_list = [
+ {
+ "sub_casename": "proc_type_auto_2_process",
+ "queue_num": 8,
+ "proc_num": 2,
+ "proc_type": "auto",
+ "packet_type": "specify",
+ },
+ {
+ "sub_casename": "proc_type_primary_secondary_3_process",
+ "queue_num": 6,
+ "proc_num": 3,
+ "proc_type": ["primary", "secondary"],
+ "packet_type": "specify",
+ },
+ ]
+ self.rte_flow(case_list, self._multiprocess_data_pass)
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_with_fdir_rule(self):
+ pmd_param = {
+ "queue_num": 64,
+ "proc_num": 2,
+ "proc_type": "auto",
+ }
+ MAC_IPV4_PAY = {
+ "match": [
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21", proto=255, ttl=2, tos=4) / Raw("x" * 80)'
+ ],
+ "mismatch": [
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.22", proto=255, ttl=2, tos=4) / Raw("x" * 80)',
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.22",dst="192.168.0.21", proto=255, ttl=2, tos=4) / Raw("x" * 80)',
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.1.21", proto=255, ttl=2, tos=4) / Raw("x" * 80)',
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21", proto=1, ttl=2, tos=4) / Raw("x" * 80)',
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21", proto=255, ttl=3, tos=4) / Raw("x" * 80)',
+ 'Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21", proto=255, ttl=2, tos=9) / Raw("x" * 80)',
+ ],
+ }
+ mac_ipv4_pay_queue_index = {
+ "sub_casename": "mac_ipv4_pay_queue_index",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions queue index 62 / mark id 4 / end",
+ "packet": MAC_IPV4_PAY,
+ "check_param": {"port_id": 0, "queue": 62, "mark_id": 4},
+ }
+ mac_ipv4_pay_drop = {
+ "sub_casename": "mac_ipv4_pay_drop",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions drop / mark / end",
+ "packet": MAC_IPV4_PAY,
+ "check_param": {"port_id": 0, "drop": True},
+ }
+ mac_ipv4_pay_rss_queues = {
+ "sub_casename": "mac_ipv4_pay_rss_queues",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions rss queues 31 32 end / mark / end",
+ "packet": MAC_IPV4_PAY,
+ "check_param": {"port_id": 0, "queue": [31, 32]},
+ }
+ mac_ipv4_pay_mark_rss = {
+ "sub_casename": "mac_ipv4_pay_mark_rss",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions mark / rss / end",
+ "packet": MAC_IPV4_PAY,
+ "check_param": {"port_id": 0, "mark_id": 0, "rss": True},
+ }
+ case_list = [
+ mac_ipv4_pay_queue_index,
+ mac_ipv4_pay_drop,
+ mac_ipv4_pay_rss_queues,
+ mac_ipv4_pay_mark_rss,
+ ]
+ self.rte_flow(case_list, self.multiprocess_flow_data, **pmd_param)
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_with_rss_toeplitz(self):
+ pmd_param = {
+ "queue_num": 32,
+ "proc_num": 2,
+ "proc_type": "auto",
+ "options": " --disable-rss --rxd=384 --txd=384",
+ }
+ mac_ipv4_tcp_toeplitz_basic_pkt = {
+ "ipv4-tcp": [
+ 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ ],
+ }
+ mac_ipv4_tcp_toeplitz_non_basic_pkt = [
+ 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/UDP(sport=22,dport=23)/("X"*480)',
+ 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IPv6(src="ABAB:910B:6666:3457:8295:3333:1800:2929",dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=22,dport=23)/Raw("x"*80)',
+ ]
+ mac_ipv4_tcp_l2_src = {
+ "sub_casename": "mac_ipv4_tcp_l2_src",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types eth l2-src-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.3", src="192.168.0.5")/TCP(sport=25,dport=99)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l2_dst = {
+ "sub_casename": "mac_ipv4_tcp_l2_dst",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types eth l2-dst-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.3", src="192.168.0.5")/TCP(sport=25,dport=99)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_non_basic_pkt,
+ "action": "check_no_hash",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l2src_l2dst = {
+ "sub_casename": "mac_ipv4_tcp_l2src_l2dst",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types eth end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.3", src="192.168.0.5")/TCP(sport=25,dport=99)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_non_basic_pkt,
+ "action": "check_no_hash",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l3_src = {
+ "sub_casename": "mac_ipv4_tcp_l3_src",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-src-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=32,dport=33)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l3_dst = {
+ "sub_casename": "mac_ipv4_tcp_l3_dst",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-dst-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=32,dport=33)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l3src_l4src = {
+ "sub_casename": "mac_ipv4_tcp_l3src_l4src",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-src-only l4-src-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l3src_l4dst = {
+ "sub_casename": "mac_ipv4_tcp_l3src_l4dst",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-src-only l4-dst-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l3dst_l4src = {
+ "sub_casename": "mac_ipv4_tcp_l3dst_l4src",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-dst-only l4-src-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l3dst_l4dst = {
+ "sub_casename": "mac_ipv4_tcp_l3dst_l4dst",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-dst-only l4-dst-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l4_src = {
+ "sub_casename": "mac_ipv4_tcp_l4_src",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l4-src-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.1.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_l4_dst = {
+ "sub_casename": "mac_ipv4_tcp_l4_dst",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l4-dst-only end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.1.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_all = {
+ "sub_casename": "mac_ipv4_tcp_all",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+ mac_ipv4_tcp_ipv4 = {
+ "sub_casename": "mac_ipv4_tcp_ipv4",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4 end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"],
+ "action": "save_hash",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_different",
+ },
+ {
+ "send_packet": 'Ether(src="00:11:22:33:44:53", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ "action": "check_hash_same",
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": [
+ mac_ipv4_tcp_toeplitz_basic_pkt["ipv4-tcp"][0],
+ ],
+ "action": "check_no_hash",
+ },
+ ],
+ }
+
+ case_list = [
+ mac_ipv4_tcp_l2_src,
+ mac_ipv4_tcp_l2_dst,
+ mac_ipv4_tcp_l2src_l2dst,
+ mac_ipv4_tcp_l3_src,
+ mac_ipv4_tcp_l3_dst,
+ mac_ipv4_tcp_l3src_l4src,
+ mac_ipv4_tcp_l3src_l4dst,
+ mac_ipv4_tcp_l3dst_l4src,
+ mac_ipv4_tcp_l3dst_l4dst,
+ mac_ipv4_tcp_l4_src,
+ mac_ipv4_tcp_l4_dst,
+ mac_ipv4_tcp_all,
+ mac_ipv4_tcp_ipv4,
+ ]
+ self.rte_flow(case_list, self.multiprocess_rss_data, **pmd_param)
+
+ @check_supported_nic(support_nic)
+ def test_multiprocess_with_rss_symmetric(self):
+ pmd_param = {
+ "queue_num": 64,
+ "proc_num": 2,
+ "proc_type": "auto",
+ }
+ packets = [
+ 'Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.2", src="192.168.0.1")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="12.168.0.2")/TCP(sport=22,dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.2", src="12.168.0.1")/TCP(sport=22,dport=23)/("X"*480)',
+ ]
+ mac_ipv4_symmetric = {
+ "sub_casename": "mac_ipv4_all",
+ "port_id": 0,
+ "rule": "flow create 0 ingress pattern eth / ipv4 / end actions rss func symmetric_toeplitz types ipv4 end key_len 0 queues end / end",
+ "test": [
+ {
+ "send_packet": packets[0],
+ "action": {"save_hash": "ipv4-nonfrag"},
+ },
+ {
+ "send_packet": packets[1],
+ "action": {"check_hash_same": "ipv4-nonfrag"},
+ },
+ {
+ "send_packet": packets[2],
+ "action": {"save_hash": "ipv4-tcp"},
+ },
+ {
+ "send_packet": packets[3],
+ "action": {"check_hash_same": "ipv4-tcp"},
+ },
+ ],
+ "post-test": [
+ {
+ "send_packet": packets[0],
+ "action": {"save_or_no_hash": "ipv4-nonfrag-post"},
+ },
+ {
+ "send_packet": packets[1],
+ "action": {"check_no_hash_or_different": "ipv4-nonfrag-post"},
+ },
+ {
+ "send_packet": packets[2],
+ "action": {"save_or_no_hash": "ipv4-tcp-post"},
+ },
+ {
+ "send_packet": packets[3],
+ "action": {"check_no_hash_or_different": "ipv4-tcp-post"},
+ },
+ ],
+ }
+ self.rte_flow(mac_ipv4_symmetric, self.multiprocess_rss_data, **pmd_param)
+
+ def test_perf_multiprocess_performance(self):
+ """
+ Benchmark Multiprocess performance.
+ #"""
+ packet_count = 16
+ self.dut.send_expect("fg", "# ")
+ txPort = self.tester.get_local_port(self.dut_ports[0])
+ rxPort = self.tester.get_local_port(self.dut_ports[1])
+ mac = self.tester.get_mac(txPort)
+ dmac = self.dut.get_mac_address(self.dut_ports[0])
+ tgenInput = []
+
+ # create mutative src_ip+dst_ip package
+ for i in range(packet_count):
+ package = (
+ r'flows = [Ether(src="%s", dst="%s")/IP(src="192.168.1.%d", dst="192.168.1.%d")/("X"*26)]'
+ % (mac, dmac, i + 1, i + 2)
+ )
+ self.tester.scapy_append(package)
+ pcap = os.sep.join([self.output_path, "test_%d.pcap" % i])
+ self.tester.scapy_append('wrpcap("%s", flows)' % pcap)
+ tgenInput.append([txPort, rxPort, pcap])
+ self.tester.scapy_execute()
+
+ # run multiple symmetric_mp process
+ validExecutions = []
+ for execution in executions:
+ if len(self.dut.get_core_list(execution["cores"])) == execution["nprocs"]:
+ validExecutions.append(execution)
+
+ portMask = utils.create_mask(self.dut_ports)
+
+ for n in range(len(validExecutions)):
+ execution = validExecutions[n]
+ # get coreList form execution['cores']
+ coreList = self.dut.get_core_list(execution["cores"], socket=self.socket)
+ # to run a set of symmetric_mp instances, like test plan
+ dutSessionList = []
+ for index in range(len(coreList)):
+ dut_new_session = self.dut.new_session()
+ dutSessionList.append(dut_new_session)
+ # add -a option when tester and dut in same server
+ dut_new_session.send_expect(
+ self.app_symmetric_mp
+ + " -c %s --proc-type=auto %s -- -p %s --num-procs=%d --proc-id=%d"
+ % (
+ utils.create_mask([coreList[index]]),
+ self.eal_param,
+ portMask,
+ execution["nprocs"],
+ index,
+ ),
+ "Finished Process Init",
+ )
+
+ # clear streams before add new streams
+ self.tester.pktgen.clear_streams()
+ # run packet generator
+ streams = self.pktgen_helper.prepare_stream_from_tginput(
+ tgenInput, 100, None, self.tester.pktgen
+ )
+ _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
+
+ execution["pps"] = pps
+
+ # close all symmetric_mp process
+ self.dut.send_expect("killall symmetric_mp", "# ")
+ # close all dut sessions
+ for dut_session in dutSessionList:
+ self.dut.close_session(dut_session)
+
+ # get rate and mpps data
+ for n in range(len(executions)):
+ self.verify(executions[n]["pps"] is not 0, "No traffic detected")
+ self.result_table_create(
+ [
+ "Num-procs",
+ "Sockets/Cores/Threads",
+ "Num Ports",
+ "Frame Size",
+ "%-age Line Rate",
+ "Packet Rate(mpps)",
+ ]
+ )
+
+ for execution in validExecutions:
+ self.result_table_add(
+ [
+ execution["nprocs"],
+ execution["cores"],
+ 2,
+ 64,
+ execution["pps"] / float(100000000 / (8 * 84)),
+ execution["pps"] / float(1000000),
+ ]
+ )
+
+ self.result_table_print()
+
+ def test_perf_multiprocess_client_serverperformance(self):
+ """
+ Benchmark Multiprocess client-server performance.
+ """
+ self.dut.kill_all()
+ self.dut.send_expect("fg", "# ")
+ txPort = self.tester.get_local_port(self.dut_ports[0])
+ rxPort = self.tester.get_local_port(self.dut_ports[1])
+ mac = self.tester.get_mac(txPort)
+
+ self.tester.scapy_append(
+ 'dmac="%s"' % self.dut.get_mac_address(self.dut_ports[0])
+ )
+ self.tester.scapy_append('smac="%s"' % mac)
+ self.tester.scapy_append(
+ 'flows = [Ether(src=smac, dst=dmac)/IP(src="192.168.1.1", dst="192.168.1.1")/("X"*26)]'
+ )
+
+ pcap = os.sep.join([self.output_path, "test.pcap"])
+ self.tester.scapy_append('wrpcap("%s", flows)' % pcap)
+ self.tester.scapy_execute()
+
+ validExecutions = []
+ for execution in executions:
+ if len(self.dut.get_core_list(execution["cores"])) == execution["nprocs"]:
+ validExecutions.append(execution)
+
+ for execution in validExecutions:
+ coreList = self.dut.get_core_list(execution["cores"], socket=self.socket)
+ # get core with socket parameter to specified which core dut used when tester and dut in same server
+ coreMask = utils.create_mask(
+ self.dut.get_core_list("1S/1C/1T", socket=self.socket)
+ )
+ portMask = utils.create_mask(self.dut_ports)
+ # specified mp_server core and add -a option when tester and dut in same server
+ self.dut.send_expect(
+ self.app_mp_server
+ + " -n %d -c %s %s -- -p %s -n %d"
+ % (
+ self.dut.get_memory_channels(),
+ coreMask,
+ self.eal_param,
+ portMask,
+ execution["nprocs"],
+ ),
+ "Finished Process Init",
+ 20,
+ )
+ self.dut.send_expect("^Z", "\r\n")
+ self.dut.send_expect("bg", "# ")
+
+ for n in range(execution["nprocs"]):
+ time.sleep(5)
+ # use next core as mp_client core, different from mp_server
+ coreMask = utils.create_mask([str(int(coreList[n]) + 1)])
+ self.dut.send_expect(
+ self.app_mp_client
+ + " -n %d -c %s --proc-type=secondary %s -- -n %d"
+ % (self.dut.get_memory_channels(), coreMask, self.eal_param, n),
+ "Finished Process Init",
+ )
+ self.dut.send_expect("^Z", "\r\n")
+ self.dut.send_expect("bg", "# ")
+
+ tgenInput = []
+ tgenInput.append([txPort, rxPort, pcap])
+
+ # clear streams before add new streams
+ self.tester.pktgen.clear_streams()
+ # run packet generator
+ streams = self.pktgen_helper.prepare_stream_from_tginput(
+ tgenInput, 100, None, self.tester.pktgen
+ )
+ _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
+
+ execution["pps"] = pps
+ self.dut.kill_all()
+ time.sleep(5)
+
+ for n in range(len(executions)):
+ self.verify(executions[n]["pps"] is not 0, "No traffic detected")
+
+ self.result_table_create(
+ [
+ "Server threads",
+ "Server Cores/Threads",
+ "Num-procs",
+ "Sockets/Cores/Threads",
+ "Num Ports",
+ "Frame Size",
+ "%-age Line Rate",
+ "Packet Rate(mpps)",
+ ]
+ )
+
+ for execution in validExecutions:
+ self.result_table_add(
+ [
+ 1,
+ "1S/1C/1T",
+ execution["nprocs"],
+ execution["cores"],
+ 2,
+ 64,
+ execution["pps"] / float(100000000 / (8 * 84)),
+ execution["pps"] / float(1000000),
+ ]
+ )
+
+ self.result_table_print()
+
+ def set_fields(self):
+ """set ip protocol field behavior"""
+ fields_config = {
+ "ip": {
+ "src": {"range": 64, "action": "inc"},
+ "dst": {"range": 64, "action": "inc"},
+ },
+ }
+
+ return fields_config
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ if self.session_list:
+ for sess in self.session_list:
+ self.dut.close_session(sess)
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ pass
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: add vf multiprocess test case
2022-05-25 8:52 [dts] [PATCH V5 1/2] tests/multiprocess_iavf: add vf multiprocess test case Jiale Song
@ 2022-05-25 8:52 ` Jiale Song
2022-05-25 9:03 ` Jiale, SongX
2022-05-25 11:12 ` lijuan.tu
0 siblings, 2 replies; 4+ messages in thread
From: Jiale Song @ 2022-05-25 8:52 UTC (permalink / raw)
To: dts; +Cc: Jiale Song
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 46433 bytes --]
we not have iavf multiprocess cases in dts.
add new vf multiprocess test suite and 14 new test cases.
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
test_plans/index.rst | 1 +
test_plans/multiprocess_iavf_test_plan.rst | 950 +++++++++++++++++++++
2 files changed, 951 insertions(+)
create mode 100644 test_plans/multiprocess_iavf_test_plan.rst
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 5867b07b..c1f0054f 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -277,6 +277,7 @@ The following are the test plans for the DPDK DTS automated test system.
hello_world_test_plan
keep_alive_test_plan
multiprocess_test_plan
+ multiprocess_iavf_test_plan
rxtx_callbacks_test_plan
skeleton_test_plan
timer_test_plan
diff --git a/test_plans/multiprocess_iavf_test_plan.rst b/test_plans/multiprocess_iavf_test_plan.rst
new file mode 100644
index 00000000..0adf4bea
--- /dev/null
+++ b/test_plans/multiprocess_iavf_test_plan.rst
@@ -0,0 +1,950 @@
+.. Copyright (c) <2022>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+=======================================
+Sample Application Tests: Multi-Process
+=======================================
+
+Simple MP Application Test
+==========================
+
+Description
+-----------
+
+This test is a basic multi-process test for iavf which demonstrates the basics of sharing
+information between DPDK processes. The same application binary is run
+twice - once as a primary instance, and once as a secondary instance. Messages
+are sent from primary to secondary and vice versa, demonstrating the processes
+are sharing memory and can communicate using rte_ring structures.
+
+Prerequisites
+-------------
+
+If using vfio the kernel must be >= 3.6+ and VT-d must be enabled in bios.When
+using vfio, use the following commands to load the vfio driver and bind it
+to the device under test::
+
+ modprobe vfio
+ modprobe vfio-pci
+ usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
+
+Assuming that a DPDK build has been set up and the multi-process sample
+applications have been built.
+
+Test Case: Basic operation
+--------------------------
+
+1. To run the application, start one copy of the simple_mp binary in one terminal,
+ passing at least two cores in the coremask, as follows::
+
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-simple_mp -c 3 --proc-type=primary
+
+ The process should start successfully and display a command prompt as follows::
+
+ $ ./x86_64-native-linuxapp-gcc/examples/dpdk-simple_mp -c 3 --proc-type=primary
+ EAL: coremask set to 3
+ EAL: Detected lcore 0 on socket 0
+ EAL: Detected lcore 1 on socket 0
+ EAL: Detected lcore 2 on socket 0
+ EAL: Detected lcore 3 on socket 0
+ ...
+ EAL: Requesting 2 pages of size 1073741824
+ EAL: Requesting 768 pages of size 2097152
+ EAL: Ask a virtual area of 0x40000000 bytes
+ EAL: Virtual area found at 0x7ff200000000 (size = 0x40000000)
+ ...
+ EAL: check igb_uio module
+ EAL: check module finished
+ EAL: Master core 0 is ready (tid=54e41820)
+ EAL: Core 1 is ready (tid=53b32700)
+ Starting core 1
+
+ simple_mp >
+
+2. To run the secondary process to communicate with the primary process, again run the
+ same binary setting at least two cores in the coremask.::
+
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-simple_mp -c C --proc-type=secondary
+
+ Once the process type is specified correctly, the process starts up, displaying largely
+ similar status messages to the primary instance as it initializes. Once again, you will be
+ presented with a command prompt.
+
+3. Once both processes are running, messages can be sent between them using the send
+ command. At any stage, either process can be terminated using the quit command.
+
+ Validate that this is working by sending a message between each process, both from
+ primary to secondary and back again. This is shown below.
+
+ Transcript from the primary - text entered by used shown in ``{}``::
+
+ EAL: Master core 10 is ready (tid=b5f89820)
+ EAL: Core 11 is ready (tid=84ffe700)
+ Starting core 11
+ simple_mp > {send hello_secondary}
+ simple_mp > core 11: Received 'hello_primary'
+ simple_mp > {quit}
+
+ Transcript from the secondary - text entered by the user is shown in ``{}``::
+
+ EAL: Master core 8 is ready (tid=864a3820)
+ EAL: Core 9 is ready (tid=85995700)
+ Starting core 9
+ simple_mp > core 9: Received 'hello_secondary'
+ simple_mp > {send hello_primary}
+ simple_mp > {quit}
+
+Test Case: Load test of Simple MP application
+---------------------------------------------
+
+1. Start up the sample application using the commands outlined in steps 1 & 2
+ above.
+
+2. To load test, send a large number of strings (>5000), from the primary instance
+ to the secondary instance, and then from the secondary instance to the primary.
+ [NOTE: A good source of strings to use is /usr/share/dict/words which contains
+ >400000 ascii strings on Fedora 14]
+
+Test Case: Test use of Auto for Application Startup
+---------------------------------------------------
+
+1. Start the primary application as in Test 1, Step 1, except replace
+ ``--proc-type=primary`` with ``--proc-type=auto``
+
+2. Validate that the application prints the line:
+ ``EAL: Auto-detected process type: PRIMARY`` on startup.
+
+3. Start the secondary application as in Test 1, Step 2, except replace
+ ``--proc-type=secondary`` with ``--proc-type=auto``.
+
+4. Validate that the application prints the line:
+ ``EAL: Auto-detected process type: SECONDARY`` on startup.
+
+5. Verify that processes can communicate by sending strings, as in Test 1,
+ Step 3.
+
+Test Case: Test running multiple processes without "--proc-type" flag
+---------------------------------------------------------------------
+
+1. Start up the primary process as in Test 1, Step 1, except omit the
+ ``--proc-type`` flag completely.
+
+2. Validate that process starts up as normal, and returns the ``simple_mp>``
+ prompt.
+
+3. Start up the secondary process as in Test 1, Step 2, except omit the
+ ``--proc-type`` flag.
+
+4. Verify that the process *fails* to start and prints an error message as
+ below::
+
+ "PANIC in rte_eal_config_create():
+ Cannot create lock on '/path/to/.rte_config'. Is another primary process running?"
+
+Symmetric MP Application Test
+=============================
+
+Description
+-----------
+
+This test is a multi-process test which demonstrates how multiple processes can
+work together to perform packet I/O and packet processing in parallel, much as
+other example application work by using multiple threads. In this example, each
+process reads packets from all network ports being used - though from a different
+RX queue in each case. Those packets are then forwarded by each process which
+sends them out by writing them directly to a suitable TX queue.
+
+Prerequisites
+-------------
+
+Assuming that an Intel DPDK build has been set up and the multi-process sample
+applications have been built. It is also assumed that a traffic generator has
+been configured and plugged in to the NIC ports 0 and 1.
+
+Test Methodology
+----------------
+
+As with the simple_mp example, the first instance of the symmetric_mp process
+must be run as the primary instance, though with a number of other application
+specific parameters also provided after the EAL arguments. These additional
+parameters are:
+
+* -p <portmask>, where portmask is a hexadecimal bitmask of what ports on the
+ system are to be used. For example: -p 3 to use ports 0 and 1 only.
+* --num-procs <N>, where N is the total number of symmetric_mp instances that
+ will be run side-by-side to perform packet processing. This parameter is used to
+ configure the appropriate number of receive queues on each network port.
+* --proc-id <n>, where n is a numeric value in the range 0 <= n < N (number of
+ processes, specified above). This identifies which symmetric_mp instance is being
+ run, so that each process can read a unique receive queue on each network port.
+
+The secondary symmetric_mp instances must also have these parameters specified,
+and the first two must be the same as those passed to the primary instance, or errors
+result.
+
+For example, to run a set of four symmetric_mp instances, running on lcores 1-4, all
+performing level-2 forwarding of packets between ports 0 and 1, the following
+commands can be used (assuming run as root)::
+
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 2 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=0
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 4 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=1
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 8 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=2
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-symmetric_mp -c 10 --proc-type=auto -- -p 3 --num-procs=4 --proc-id=3
+
+To run only 1 or 2 instances, the above parameters to the 1 or 2 instances being
+run should remain the same, except for the ``num-procs`` value, which should be
+adjusted appropriately.
+
+
+Test Case: Function Tests
+-------------------------
+start 2 symmetric_mp process, send some packets, the number of packets is a random value between 20 and 256.
+summarize all received packets and check whether it is bigger than or equal to the number of sent packets
+
+1. start 2 process::
+
+ /dpdk-symmetric_mp -l 1 -n 4 --proc-type=auto -a 0000:05:01.0 -a 0000:05:01.1 -- -p 0x3 --num-procs=2 --proc-id=0
+ /dpdk-symmetric_mp -l 2 -n 4 --proc-type=auto -a 0000:05:01.0 -a 0000:05:01.1 -- -p 0x3 --num-procs=2 --proc-id=1
+
+2. send some packets,the number of packets is a random value between 20 and 256, packet type including IPV6/4,TCP/UDP,
+ refer to Random_Packet
+
+3. stop all process and check output::
+
+ the number of received packets for each process should bigger than 0.
+ summarize all received packets for all process should bigger than or equal to the number of sent packets
+
+
+Client Server Multiprocess Tests
+================================
+
+Description
+-----------
+
+The client-server sample application demonstrates the ability of Intel� DPDK
+to use multiple processes in which a server process performs packet I/O and one
+or multiple client processes perform packet processing. The server process
+controls load balancing on the traffic received from a number of input ports to
+a user-specified number of clients. The client processes forward the received
+traffic, outputting the packets directly by writing them to the TX rings of the
+outgoing ports.
+
+Prerequisites
+-------------
+
+Assuming that an Intel� DPDK build has been set up and the multi-process
+sample application has been built.
+Also assuming a traffic generator is connected to the ports "0" and "1".
+
+It is important to run the server application before the client application,
+as the server application manages both the NIC ports with packet transmission
+and reception, as well as shared memory areas and client queues.
+
+Run the Server Application:
+
+- Provide the core mask on which the server process is to run using -c, e.g. -c 3 (bitmask number).
+- Set the number of ports to be engaged using -p, e.g. -p 3 refers to ports 0 & 1.
+- Define the maximum number of clients using -n, e.g. -n 8.
+
+The command line below is an example on how to start the server process on
+logical core 2 to handle a maximum of 8 client processes configured to
+run on socket 0 to handle traffic from NIC ports 0 and 1::
+
+ root@host:mp_server# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_server -c 2 -- -p 3 -n 8
+
+NOTE: If an additional second core is given in the coremask to the server process
+that second core will be used to print statistics. When benchmarking, only a
+single lcore is needed for the server process
+
+Run the Client application:
+
+- In another terminal run the client application.
+- Give each client a distinct core mask with -c.
+- Give each client a unique client-id with -n.
+
+An example commands to run 8 client processes is as follows::
+
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 40 --proc-type=secondary -- -n 0 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 100 --proc-type=secondary -- -n 1 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 400 --proc-type=secondary -- -n 2 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 1000 --proc-type=secondary -- -n 3 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 4000 --proc-type=secondary -- -n 4 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 10000 --proc-type=secondary -- -n 5 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 40000 --proc-type=secondary -- -n 6 &
+ root@host:mp_client# ./x86_64-native-linuxapp-gcc/examples/dpdk-mp_client -c 100000 --proc-type=secondary -- -n 7 &
+
+Test Case: Function Tests
+-------------------------
+start server process and 2 client process, send some packets, the number of packets is a random value between 20 and 256.
+summarize all received packets and check whether it is bigger than or equal to the number of sent packets
+
+1. start server process::
+
+ ./dpdk-mp_server -l 1,2 -n 4 -a 0000:05:01.0 -a 0000:05:01.1 -- -p 0x3 -n 2
+
+2. start 2 client process::
+
+ ./dpdk-mp_client -l 3 -n 4 -a 0000:05:01.0 -a 0000:05:01.1 --proc-type=auto -- -n 0
+ ./dpdk-mp_client -l 4 -n 4 -a 0000:05:01.0 -a 0000:05:01.1 --proc-type=auto -- -n 1
+
+3. send some packets,the number of packets is a random value between 20 and 256, packet type include IPV6/4,TCP/UDP,
+ refer to Random_Packet
+
+4. stop all process and check output::
+
+ the number of received packets for each client should bigger than 0.
+ summarize all received packets for all clients should bigger than or equal to the number of sent packets
+
+Testpmd Multi-Process Test
+==========================
+
+Description
+-----------
+
+This is a multi-process test for Testpmd application, which demonstrates how multiple processes can
+work together to perform packet in parallel.
+
+Test Methodology
+----------------
+Testpmd support to specify total number of processes and current process ID.
+Each process owns subset of Rx and Tx queues
+The following are the command-line options for testpmd multi-process support::
+
+ primary process:
+ ./dpdk-testpmd -a xxx --proc-type=auto -l 0-1 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=0
+
+ secondary process:
+ ./dpdk-testpmd -a xxx --proc-type=auto -l 2-3 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=1
+
+ --num-procs:
+ The number of processes which will be used
+ --proc-id:
+ The ID of the current process (ID < num-procs),ID should be different in primary process and secondary
+ process, which starts from ‘0’.
+
+All queues are allocated to different processes based on proc_num and proc_id
+Calculation rule for queue::
+
+ start(queue start id) = proc_id * nb_q / num_procs
+ end(queue end id) = start + nb_q / num_procs
+
+For example, if testpmd is configured to have 4 Tx and Rx queues, queues 0 and 1 will be used by the primary process and
+queues 2 and 3 will be used by the secondary process.
+
+Note::
+
+ nb_q is the number of queue
+ The number of queues should be a multiple of the number of processes. If not, redundant queues will exist after
+ queues are allocated to processes. If RSS is enabled, packet loss occurs when traffic is sent to all processes at the
+ same time.Some traffic goes to redundant queues and cannot be forwarded.
+ All the dev ops is supported in primary process. While secondary process is not permitted to allocate or release
+ shared memory.
+ When secondary is running, port in primary is not permitted to be stopped.
+ Reconfigure operation is only valid in primary.
+ Stats is supported, stats will not change when one quits and starts, as they share the same buffer to store the stats.
+ Flow rules are maintained in process level:
+ primary and secondary has its own flow list (but one flow list in HW). The two can see all the queues, so setting
+ the flow rules for the other is OK. But in the testpmd primary process receiving or transmitting packets from the
+ queue allocated for secondary process is not permitted, and same for secondary process
+
+ Flow API and RSS are supported
+
+Prerequisites
+-------------
+
+1. Hardware:
+ columbiaville_25g/columbiaville_100g
+
+2. Software:
+ DPDK: http://dpdk.org/git/dpdk
+ scapy: http://www.secdev.org/projects/scapy/
+
+3. Copy specific ice package to /lib/firmware/intel/ice/ddp/ice.pkg
+
+4. Generate 2 VFs on PF and set mac address for vf0::
+
+ echo 2 > /sys/bus/pci/devices/0000:af:00.0/sriov_numvfs
+ ip link set eth7 vf 0 mac 00:11:22:33:44:55
+
+ 0000:05:00.0 generate 0000:05:01.0 and 0000:05:01.1
+
+4. Bind VFs to dpdk driver::
+
+ ./usertools/dpdk-devbind.py -b vfio-pci 0000:05:01.0 0000:05:01.1
+
+Default parameters
+------------------
+
+ MAC::
+
+ [Dest MAC]: 00:11:22:33:44:55
+
+ IPv4::
+
+ [Source IP]: 192.168.0.20
+ [Dest IP]: 192.168.0.21
+ [IP protocol]: 255
+ [TTL]: 2
+ [DSCP]: 4
+
+ TCP::
+
+ [Source Port]: 22
+ [Dest Port]: 23
+
+ Random_Packet::
+
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.1', hlim=64)/TCP(sport=65535, dport=65535, flags=0)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IP(frag=0, src='192.168.0.1', tos=0, dst='192.168.1.2', version=4, ttl=64, id=1)/UDP(sport=65535, dport=65535)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.3', hlim=64)/UDP(sport=65535, dport=65535)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.4', hlim=64)/UDP(sport=65535, dport=65535)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.5', hlim=64)/TCP(sport=65535, dport=65535, flags=0)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IP(frag=0, src='192.168.0.1', tos=0, dst='192.168.1.15', version=4, ttl=64, id=1)/UDP(sport=65535, dport=65535)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.16', hlim=64)/TCP(sport=65535, dport=65535, flags=0)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.27', hlim=64)/TCP(sport=65535, dport=65535, flags=0)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IP(frag=0, src='192.168.0.1', tos=0, dst='192.168.1.28', version=4, ttl=64, id=1)/TCP(sport=65535, dport=65535, flags=0)/Raw(),
+ Ether(dst='00:11:22:33:44:55', src='00:00:20:00:00:00')/IPv6(src='::192.168.0.1', version=6, tc=0, fl=0, dst='::192.168.1.30', hlim=64)/TCP(sport=65535, dport=65535, flags=0)/Raw()
+
+Test Case: multiprocess proc_type random packet
+===============================================
+
+Subcase 1: proc_type_auto_4_process
+-----------------------------------
+1. Launch the app ``testpmd``, start 4 process with rxq/txq set as 16 (proc_id:0~3, queue id:0~15) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=4 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=4 --proc-id=1
+ ./dpdk-testpmd -l 5,6 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=4 --proc-id=2
+ ./dpdk-testpmd -l 7,8 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=4 --proc-id=3
+
+2. Send 20 random packets::
+
+ packets generated by script, packet type including 'TCP', 'UDP', 'IPv6_TCP', 'IPv6_UDP', like as: Random_Packet
+
+3. Check whether each process receives 5 packets with the corresponding queue::
+
+ process 0 should receive 5 packets with queue 0~3
+ process 1 should receive 5 packets with queue 4~7
+ process 2 should receive 5 packets with queue 8~11
+ process 3 should receive 5 packets with queue 12~15
+
+4. Check the statistics is correctly, the total number of packets received is 20
+
+Subcase 2: proc_type_primary_secondary_2_process
+------------------------------------------------
+1. Launch the app ``testpmd``, start 2 process with rxq/txq set as 4 (proc_id:0~1, queue id:0~3) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=primary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=secondary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=1
+
+2. Send 20 random packets::
+
+ packets generated by script, packet type including 'TCP', 'TCP', 'IPv6_TCP', 'IPv6_UDP', such as: Random_Packet
+
+3. Check whether each process receives 10 packets with the corresponding queue::
+
+ process 0 should receive 10 packets with queue 0~1
+ process 1 should receive 10 packets with queue 2~3
+
+
+4. Check the statistics is correctly, the total number of packets received is 20
+
+Test Case: multiprocess proc_type specify packet
+================================================
+
+Subcase 1: proc_type_auto_2_process
+-----------------------------------
+1. Launch the app ``testpmd``, start 2 process with rxq/txq set as 8 (proc_id:0~1, queue id:0~7) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=1
+
+2. Create rule to set queue as one of each process queues::
+
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 / end actions queue index 0 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.1.20 / end actions queue index 1 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.2.20 / end actions queue index 2 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.3.20 / end actions queue index 3 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.4.20 / end actions queue index 4 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.5.20 / end actions queue index 5 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.6.20 / end actions queue index 6 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.7.20 / end actions queue index 7 / end
+
+3. Send 1 matched packet for each rule::
+
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.1.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.2.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.3.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.4.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.5.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.6.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.7.20")/("X"*46)
+
+4. Check whether each process receives 4 packets with the corresponding queue::
+
+ process 0 should receive 4 packets with queue 0~3
+ process 1 should receive 4 packets with queue 4~7
+
+5. Check the statistics is correctly, the total number of packets received is 8
+
+Subcase 2: proc_type_primary_secondary_3_process
+------------------------------------------------
+1. Launch the app ``testpmd``, start 3 process with rxq/txq set as 6 (proc_id:0~2, queue id:0~5) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=6 --txq=6 --num-procs=3 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=6 --txq=6 --num-procs=3 --proc-id=1
+ ./dpdk-testpmd -l 5,6 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=6 --txq=6 --num-procs=3 --proc-id=2
+
+2. Create rule to set queue as one of each process queues::
+
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 / end actions queue index 0 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.1.20 / end actions queue index 1 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.2.20 / end actions queue index 2 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.3.20 / end actions queue index 3 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.4.20 / end actions queue index 4 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.5.20 / end actions queue index 5 / end
+
+3. Send 1 matched packet for each rule::
+
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.1.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.2.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.3.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.4.20")/("X"*46)
+ Ether(dst="00:11:22:33:44:55")/IP(src="192.168.5.20")/("X"*46)
+
+4. Check whether each process receives 2 packets with the corresponding queue::
+
+ process 0 should receive 2 packets with queue 0~1
+ process 1 should receive 2 packets with queue 2~3
+ process 2 should receive 2 packets with queue 4~5
+
+5. Check the statistics is correctly, the total number of packets received is 6
+
+Test Case: test_multiprocess_with_fdir_rule
+===========================================
+
+Launch the app ``testpmd``, start 2 process with rxq/txq set as 16 (proc_id:0~1, queue id:0~15) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 -n 4 -a 0000:05:01.0 --proc-type=auto --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 -n 4 -a 0000:05:01.0 --proc-type=auto --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=2 --proc-id=1
+
+Subcase 1: mac_ipv4_pay_queue_index
+-----------------------------------
+
+1. Create rule::
+
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions queue index 6 / mark id 4 / end
+
+2. Send matched packets, check the packets is distributed to queue 6 with FDIR matched ID=0x4.
+ Send unmatched packets, check the packets are distributed by RSS without FDIR matched ID
+
+3. Verify rules can be listed and destroyed::
+
+ testpmd> flow list 0
+
+ check the rule listed.
+ destroy the rule::
+
+ testpmd> flow destroy 0 rule 0
+
+4. Verify matched packet is distributed by RSS without FDIR matched ID.
+ check there is no rule listed.
+
+Subcase 2: mac_ipv4_pay_rss_queues
+----------------------------------
+1. Create rule::
+
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions rss queues 10 11 end / mark / end
+
+2. Send matched packets, check the packets is distributed to queue 10 or 11.
+ Send unmatched packets, check the packets are distributed by RSS
+
+3. Repeat step 3 of subcase 1
+
+4. Verify matched packet is distributed by RSS.
+ check there is no rule listed.
+
+Subcase 3: mac_ipv4_pay_drop
+----------------------------
+
+1. Create rule::
+
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions drop / mark / end
+
+2. Send matched packets, check the packets are dropped.
+ Send unmatched packets, check the packets are not dropped
+
+3. Repeat step 3 of subcase 1
+
+4. Verify matched packets are not dropped.
+ check there is no rule listed.
+
+Subcase 4: mac_ipv4_pay_mark_rss
+--------------------------------
+1. Create rule::
+
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 proto is 255 ttl is 2 tos is 4 / end actions mark / rss / end
+
+2. Send matched packets, check the packets are distributed by RSS with FDIR matched ID=0x0.
+ Send unmatched packets, check the packets are distributed by RSS without FDIR matched ID
+
+3. Repeat step 3 of subcase 1
+
+4. Verify matched packets are distributed to the same queue without FDIR matched ID.
+ check there is no rule listed.
+
+Note: step2 and step4 need to check whether all received packets of each process are distributed by RSS
+
+
+Test Case: test_multiprocess_with_rss_toeplitz
+==============================================
+Launch the app ``testpmd``,start 2 process with queue num set as 16 (proc_id: 0~1, queue id: 0~15) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 -n 4 -a 0000:05:01.0 --proc-type=auto --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 -n 4 -a 0000:05:01.0 --proc-type=auto --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=2 --proc-id=1
+
+all the test cases run the same test steps as below::
+
+ 1. validate rule.
+ 2. create rule and list rule.
+ 3. send a basic hit pattern packet,record the hash value,
+ check the packet is distributed to queues by RSS.
+ 4. send hit pattern packet with changed input set in the rule.
+ check the received packet have different hash value with basic packet.
+ check the packet is distributed to queues by rss.
+ 5. send hit pattern packet with changed input set not in the rule.
+ check the received packet have same hash value with the basic packet.
+ check the packet is distributed to queues by rss.
+ 6. destroy the rule and list rule.
+ 7. send same packet with step 3.
+ check the received packets have no hash value, and distributed to queue 0.
+
+ Note: step3, step4 and step5 need to check whether all received packets of each process are distributed by RSS
+
+basic hit pattern packets are the same in this test case.
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+Subcase 1: mac_ipv4_tcp_l2_src
+------------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types eth l2-src-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E1")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:27:E0")/IP(dst="192.168.0.3", src="192.168.0.5")/TCP(sport=25,dport=99)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l2_dst
+----------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types eth l2-dst-only end key_len 0 queues end / end
+
+2. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.3", src="192.168.0.5")/TCP(sport=25,dport=99)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l2src_l2dst
+---------------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types eth end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", dst="68:05:CA:BB:26:E1")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.3", src="192.168.0.5")/TCP(sport=25,dport=99)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l3_src
+----------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-src-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=32,dport=33)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l3_dst
+----------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-dst-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=32,dport=33)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l3src_l4src
+---------------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-src-only l4-src-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l3src_l4dst
+---------------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-src-only l4-dst-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l3dst_l4src
+---------------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-dst-only l4-src-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l3dst_l4dst
+---------------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l3-dst-only l4-dst-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l4_src
+----------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l4-src-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", dst="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.1.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_l4_dst
+----------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp l4-dst-only end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.1.1", src="192.168.1.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+
+Subcase: mac_ipv4_tcp_ipv4
+--------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4 end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=33)/("X"*480)],iface="enp134s0f0")
+
+Subcase: mac_ipv4_tcp_all
+-------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=33)/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=32,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.1.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.1.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+3. hit pattern/not defined input set:
+ipv4-tcp packets::
+
+ sendp([Ether(src="00:11:22:33:44:55", dst="68:05:CA:BB:27:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+Test Case: test_multiprocess_with_rss_symmetric
+===============================================
+Launch the app ``testpmd``, start 2 process with queue num set as 16(proc_id: 0~1, queue id: 0~15) with the following arguments::
+
+ ./dpdk-testpmd -l 1,2 -n 4 -a 0000:05:01.0 --proc-type=auto --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 -n 4 -a 0000:05:01.0 --proc-type=auto --log-level=ice,7 -- -i --rxq=16 --txq=16 --num-procs=2 --proc-id=1
+
+test steps as below::
+
+ 1. validate and create rule.
+ 2. set "port config all rss all".
+ 3. send hit pattern packets with switched value of input set in the rule.
+ check the received packets have the same hash value.
+ check all the packets are distributed to queues by rss
+ 4. destroy the rule and list rule.
+ 5. send same packets with step 3
+ check the received packets have no hash value, or have different hash value.
+
+ Note: step3 needs to check whether all received packets of each process are distributed by RSS
+
+Subcase: mac_ipv4_symmetric
+---------------------------
+1. create rss rule::
+
+ flow create 0 ingress pattern eth / ipv4 / end actions rss func symmetric_toeplitz types ipv4 end key_len 0 queues end / end
+
+2. hit pattern/defined input set:
+ipv4-nonfrag packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.2", src="192.168.0.1")/("X"*480)],iface="ens786f0")
+
+ipv4-frag packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2",frag=6)/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.2", src="192.168.0.1",frag=6)/("X"*480)],iface="ens786f0")
+
+ipv4-tcp packets::
+
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.1", src="192.168.0.2")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+ sendp([Ether(dst="00:11:22:33:44:55", src="68:05:CA:BB:26:E0")/IP(dst="192.168.0.2", src="192.168.0.1")/TCP(sport=22,dport=23)/("X"*480)],iface="ens786f0")
+
+Test Case: test_multiprocess_auto_process_type_detected
+=======================================================
+1. start 2 process with queue num set as 8 (proc_id:0~1,queue id:0~7)::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=auto -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=1
+
+2. check the ouput of each process::
+
+ process 1 output contains 'Auto-detected process type: PRIMARY'
+ process 2 output contains 'Auto-detected process type: SECONDARY'
+
+Test Case: test_multiprocess_negative_2_primary_process
+=======================================================
+1. start 2 process with queue num set as 4 (proc_id:0~1,queue id:0~3)::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=primary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=primary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=1
+
+2. check the ouput of each process::
+
+ process 1 launches successfully
+ process 2 launches failed and output contains 'Is another primary process running?'
+
+Test Case: test_multiprocess_negative_exceed_process_num
+========================================================
+1. start 3 process exceed the specifed num 2::
+
+ ./dpdk-testpmd -l 1,2 --proc-type=primary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=0
+ ./dpdk-testpmd -l 3,4 --proc-type=primary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=1
+ ./dpdk-testpmd -l 5,6 --proc-type=primary -a 0000:05:01.0 --log-level=ice,7 -- -i --rxq=8 --txq=8 --num-procs=2 --proc-id=2
+
+2. check the ouput of each process::
+
+ the first and second processes should be launched successfully
+ the third process should be launched failed and output should contain the following string:
+ 'multi-process option proc-id(2) should be less than num-procs(2)'
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: add vf multiprocess test case
2022-05-25 8:52 ` [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: " Jiale Song
@ 2022-05-25 9:03 ` Jiale, SongX
2022-05-25 11:12 ` lijuan.tu
1 sibling, 0 replies; 4+ messages in thread
From: Jiale, SongX @ 2022-05-25 9:03 UTC (permalink / raw)
To: dts
> -----Original Message-----
> From: Jiale, SongX <songx.jiale@intel.com>
> Sent: Wednesday, May 25, 2022 4:52 PM
> To: dts@dpdk.org
> Cc: Jiale, SongX <songx.jiale@intel.com>
> Subject: [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: add vf multiprocess
> test case
>
> we not have iavf multiprocess cases in dts.
> add new vf multiprocess test suite and 14 new test cases.
>
> Signed-off-by: Jiale Song <songx.jiale@intel.com>
Acked-by: Peng, Yuan <yuan.peng@intel.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: add vf multiprocess test case
2022-05-25 8:52 ` [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: " Jiale Song
2022-05-25 9:03 ` Jiale, SongX
@ 2022-05-25 11:12 ` lijuan.tu
1 sibling, 0 replies; 4+ messages in thread
From: lijuan.tu @ 2022-05-25 11:12 UTC (permalink / raw)
To: dts, Jiale Song; +Cc: Jiale Song
On Wed, 25 May 2022 16:52:23 +0800, Jiale Song <songx.jiale@intel.com> wrote:
> we not have iavf multiprocess cases in dts.
> add new vf multiprocess test suite and 14 new test cases.
>
> Signed-off-by: Jiale Song <songx.jiale@intel.com>
Series applied, thanks
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-05-25 11:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-25 8:52 [dts] [PATCH V5 1/2] tests/multiprocess_iavf: add vf multiprocess test case Jiale Song
2022-05-25 8:52 ` [dts] [PATCH V5 2/2] test_plans/multiprocess_iavf: " Jiale Song
2022-05-25 9:03 ` Jiale, SongX
2022-05-25 11:12 ` lijuan.tu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).