test suite reviews and discussions
 help / color / mirror / Atom feed
From: "Chen, Zhaoyan" <zhaoyan.chen@intel.com>
To: "Chen, BoX C" <box.c.chen@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Chen, BoX C" <box.c.chen@intel.com>,
	"Chen@dpdk.org" <Chen@dpdk.org>,
	"Chen, Zhaoyan" <zhaoyan.chen@intel.com>
Subject: Re: [dts] [PATCH V1] tests/ABI: add abi stable test case
Date: Fri, 24 Apr 2020 02:20:58 +0000	[thread overview]
Message-ID: <9DEEADBC57E43F4DA73B571777FECECA41F3187B@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20200422094834.31991-1-box.c.chen@intel.com>

Bo, Could you please remove the code which you have commented out.



Regards,
Zhaoyan Chen

> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Chen,Bo
> Sent: Wednesday, April 22, 2020 5:49 PM
> To: dts@dpdk.org
> Cc: Chen, BoX C <box.c.chen@intel.com>; Chen@dpdk.org
> Subject: [dts] [PATCH V1] tests/ABI: add abi stable test case
> 
> add ABI stable test case: negative
> 
> Signed-off-by: Chen,Bo <box.c.chen@intel.com>
> ---
>  tests/TestSuite_ABI_stable.py | 129
> ++++++++++++++++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 tests/TestSuite_ABI_stable.py
> 
> diff --git a/tests/TestSuite_ABI_stable.py b/tests/TestSuite_ABI_stable.py
> new file mode 100644 index 0000000..d292b33
> --- /dev/null
> +++ b/tests/TestSuite_ABI_stable.py
> @@ -0,0 +1,129 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +#   * Redistributions of source code must retain the above copyright
> +#     notice, this list of conditions and the following disclaimer.
> +#   * Redistributions in binary form must reproduce the above copyright
> +#     notice, this list of conditions and the following disclaimer in
> +#     the documentation and/or other materials provided with the
> +#     distribution.
> +#   * Neither the name of Intel Corporation nor the names of its
> +#     contributors may be used to endorse or promote products derived
> +#     from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Test support of RX/TX Checksum Offload Features by Poll Mode Drivers.
> +
> +"""
> +import utils
> +import time
> +
> +from test_case import TestCase
> +from pmd_output import PmdOutput
> +from settings import load_global_setting, HOST_SHARED_LIB_SETTING,
> +HOST_SHARED_LIB_PATH
> +
> +
> +class TestABIStable(TestCase):
> +
> +    def set_up_all(self):
> +        """
> +        Run at the start of each test suite.
> +        """
> +        self.pmdout = PmdOutput(self.dut)
> +        self.dut_ports = self.dut.get_ports(self.nic)
> +        self.port_mask = utils.create_mask([self.dut_ports[0]])
> +        use_shared_lib = load_global_setting(HOST_SHARED_LIB_SETTING)
> +        self.verify(use_shared_lib != 'ture', "The case only support
> + ABI mode")
> +
> +    def set_up(self):
> +        """
> +        Run before each test case.
> +        """
> +        pass
> +
> +    def test_negative(self):
> +        net_device = self.dut.ports_info[0]['port']
> +        nic_drive = net_device.get_nic_driver()
> +        shared_lib_path = load_global_setting(HOST_SHARED_LIB_PATH)
> +
> +        self.verify(nic_drive != "ixgbe", "The case only support ixgbe drive")
> +        # self.dut.send_expect("git apply 0001-rte_tx_burst_t_add-one-
> argument-at-the-begin.patch", "#")
> +        # self.dut.build_install_dpdk(self.target)
> +        # cmd = 'meson -Dexamples=all --buildtype=debugoptimized --
> default-library=shared ./devtools/.. ./build-gcc-shared'
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'meson configure -
> Ddisable_drivers=net/af_packet,net/ark,net/atlantic,net/avp,net/axgbe,net
> /bond,net/bnx2x,net/cxgbe,net/e1000,net/ena,net/enetc,net/enic,net/fm
> 10k,net/hinic,net/hns3,net/iavf,net/ice,net/kni,net/liquidio,net/memif,net
> /netvsc,net/nfp,net/null,net/octeontx,net/octeontx2,net/pcap,net/pfe,net
> /qede,net/sfc,net/tap,net/thunderx,net/vdev_netvsc,net/vhost,net/virtio,n
> et/vmxnet3,common/iavf,bus/ifpga,bus/vmbus,mempool/bucket,mempoo
> l/stack,raw/ioat,raw/octeontx2_dma,raw/octeontx2_ep,raw/skeleton,crypt
> o/caam_jr,crypto/ccp,crypto/nitrox,crypto/null_crypto,crypto/octeontx_cr
> ypto,crypto/octeontx2_crypto,crypto/openssl,crypto/crypto_scheduler,cr
> ypto/virtio_crypto,vdpa/ifc,event/octeontx2,event/opdl,event/skeleton,ev
> ent/sw,event/dsw,event/octeontx,baseband/null,baseband/turbo_sw,base
> band/fpga_lte_fec,net/failsafe ./build-gcc-shared'
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'ninja -C ./build-gcc-shared'
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'cp -Rap ./build-gcc-shared/drivers/* ./build-gcc-shared/lib/'
> +        # self.dut.send_expect(cmd, "#")
> +        cmd = 'rm -rf {}'.format(shared_lib_path)
> +        self.dut.send_expect(cmd, "#")
> +        cmd = 'cp -a /root/shared_lib_negative {}'.format(shared_lib_path)
> +        self.dut.send_expect(cmd, "#")
> +        # cmd = 'mv ./build-gcc-shared/lib/ {}'.format(shared_lib_path)
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'rm -rf {}/*.a'.format(shared_lib_path)
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'rm -rf {}/*.exp_chk'.format(shared_lib_path)
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'rm -rf {}/*.def'.format(shared_lib_path)
> +        # self.dut.send_expect(cmd, "#")
> +        # cmd = 'rm -rf {}/*.c'.format(shared_lib_path)
> +        # self.dut.send_expect(cmd, "#")
> +
> +        self.pmdout.start_testpmd("Default", "--portmask={}
> ".format(self.port_mask))
> +        time.sleep(1)
> +        self.dut.send_expect("set fwd txonly", "testpmd>")
> +        self.dut.send_expect("start", "testpmd>")
> +        time.sleep(1)
> +        try:
> +            self.dut.send_expect("quit", "testpmd>")
> +        except Exception as e:
> +            if 'TIMEOUT' in str(e):
> +                self.logger.info(str(e))
> +            else:
> +                self.verify(False, "No timeout")
> +            self.dut.kill_all()
> +            # time.sleep(1)
> +            # self.dut.send_expect("git apply -R abi_negative.patch")
> +            # self.dut.build_install_dpdk(self.target)
> +            return
> +
> +        self.verify(False, "negative test failed")
> +        self.dut.kill_all()
> +        # time.sleep(1)
> +        # self.dut.send_expect("git apply -R abi_negative.patch", "#")
> +        # self.dut.build_install_dpdk(self.target)
> +
> +    def tear_down(self):
> +        """
> +        Run after each test case.
> +        """
> +        pass
> +
> +    def tear_down_all(self):
> +        """
> +        Run after each test suite.
> +        """
> +        self.dut.kill_all()
> --
> 2.17.1


      parent reply	other threads:[~2020-04-24  2:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-22  9:48 Chen,Bo
2020-04-23  3:04 ` Han, YingyaX
2020-04-24  2:20 ` Chen, Zhaoyan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9DEEADBC57E43F4DA73B571777FECECA41F3187B@SHSMSX104.ccr.corp.intel.com \
    --to=zhaoyan.chen@intel.com \
    --cc=Chen@dpdk.org \
    --cc=box.c.chen@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).