From: "Mo, YufengX" <yufengx.mo@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Cc: "Mo, YufengX" <yufengx.mo@intel.com>
Subject: Re: [dts] [PATCH V2]pmd_bonded_8023ad: upload automation script
Date: Thu, 28 Feb 2019 06:04:18 +0000 [thread overview]
Message-ID: <B8B15C44A3F2C044966E545C7B7371153E7B9F32@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1551332164-33086-2-git-send-email-yufengx.mo@intel.com>
Tested-by: Mo, YufengX <yufengx.mo@intel.com>
> -----Original Message-----
> From: Mo, YufengX
> Sent: Thursday, February 28, 2019 1:36 PM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V2]pmd_bonded_8023ad: upload automation script
>
>
> This automation script is for pmd bonded 8023ad feature.
>
> IEEE 802.3ad Dynamic link aggregation. Creates aggregation groups that share
> the same speed and duplex settings. Utilizes all slaves in the active
> aggregator according to the 802.3ad specification. Slave selection for outgoing
> traffic is done according to the transmit hash policy.
>
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
> tests/TestSuite_pmd_bonded_8023ad.py | 599 +++++++++++++++++++++++++++++++++++
> 1 file changed, 599 insertions(+)
> create mode 100644 tests/TestSuite_pmd_bonded_8023ad.py
>
> diff --git a/tests/TestSuite_pmd_bonded_8023ad.py b/tests/TestSuite_pmd_bonded_8023ad.py
> new file mode 100644
> index 0000000..cad573e
> --- /dev/null
> +++ b/tests/TestSuite_pmd_bonded_8023ad.py
> @@ -0,0 +1,599 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import time
> +import re
> +import traceback
> +
> +# import dts/framework libs
> +from test_case import TestCase
> +from exception import VerifyFailure
> +
> +# import bonding lib(common methods for pmd bonding command)
> +import bonding
> +from bonding import MODE_LACP, FRAME_SIZE_64
> +
> +######################
> +# bonding 802.3ad mode
> +######################
> +class TestBonding8023AD(TestCase):
> + AGG_MODES = ["bandwidth", "stable", "count"]
> + DEDICATED_QUEUES = ['disable', 'enable']
> +
> + #
> + # On dut, dpdk bonding
> + #
> +
> + def set_8023ad_agg_mode(self, bond_port, mode="bandwidth"):
> + """
> + set bonding agg_mode <port_id> <agg_name>
> +
> + Set 802.11AD Aggregator Mode
> + """
> + cmd = "set bonding agg_mode %d %s" % (bond_port, mode)
> + self.bond_inst.d_console(cmd)
> + cur_mode = self.bond_inst.get_bonding_info(bond_port, 'agg_mode')
> + if mode == cur_mode:
> + fmt = "set bonding agg_mode <{0}> successfully"
> + self.logger.info(fmt.format(mode))
> + else:
> + msg = "failed to set bonding agg_mode <{0}>".format(mode)
> + self.logger.error(msg)
> + raise VerifyFailure(msg)
> +
> + def get_8023ad_agg_mode(self, bond_port):
> + """
> + get 802.3ad mode aggregator Mode
> + """
> + cur_mode = self.bond_inst.get_bonding_info(bond_port, 'agg_mode')
> + return cur_mode
> +
> + def set_8023ad_dedicated_queues(self, bond_port, status='disable'):
> + """
> + set 802.11AD dedicated_queues mode(enable|disable)
> + """
> + cmds =[
> + ["set bonding lacp dedicated_queues %s %s" % (bond_port, status),
> + ['', 'port %s failed'%bond_port, False], 2],]
> + out = self.bond_inst.d_console(cmds)
> + # when set 'hw'
> + if status == 'enable':
> + expected_msg = 'queues for LACP control packets enabled'
> + err_fmt = "link bonding mode 4 (802.3ad) set {0} failed"
> + self.verify(expected_msg in out, err_fmt.format(status))
> + elif status == 'disable':
> + expected_msg = 'queues for LACP control packets disabled'
> + err_fmt = "link bonding mode 4 (802.3ad) set {0} failed"
> + self.verify(expected_msg in out, err_fmt.format(status))
> +
> + def set_8023ad_bonded(self, slaves, bond_mode, ignore=True):
> + ''' set 802.3ad bonded mode for the specified bonding mode '''
> + specified_socket = self.dut.get_numa_id(slaves[0])
> + # create bonded device, add slaves in it
> + bond_port = self.bond_inst.create_bonded_device(bond_mode, specified_socket)
> + if not ignore:
> + # when no slave attached, mac should be 00:00:00:00:00:00
> + self.bonding_8023ad_check_macs_without_slaves(bond_port)
> + # add slave
> + self.bond_inst.add_slave(bond_port, False, '', *slaves)
> + return bond_port
> +
> + def get_pci_link(self, slaves):
> + ''' get slaves ports pci address '''
> + slaves_pci = []
> + for port_id in slaves:
> + slaves_pci.append(self.dut.ports_info[port_id]['pci'])
> + if not slaves_pci:
> + msg = "can't find tx_port pci"
> + self.logger.error(msg)
> + raise VerifyFailure(msg)
> + return slaves_pci
> +
> + def set_bond_port_ready(self, tx_port, bond_port):
> + cmd= "set portlist {0},{1}".format(tx_port, bond_port)
> + self.bond_inst.d_console(cmd)
> + # for port link up is slow and unstable,
> + # every port should start one by one
> + cmds = []
> + port_num = len(self.dut_ports)
> + start_fmt = "port start {0}".format
> + for cnt in range(port_num):
> + cmds.append([start_fmt(cnt), '', 5])
> + self.bond_inst.d_console(cmds)
> + time.sleep(10)
> + self.bond_inst.d_console([start_fmt(self.bond_port), '', 15])
> + time.sleep(5)
> + self.bond_inst.d_console(["start", '', 10])
> + self.logger.info("set bond port ready done !!!")
> +
> + def run_8023ad_pre(self, slaves, bond_mode):
> + bond_port = self.set_8023ad_bonded(slaves, bond_mode)
> + # should set port to stop and make sure port re-sync with parter when
> + # testpmd linking with switch equipment
> + cmds = ["port stop all", '', 15]
> + self.bond_inst.d_console(cmds)
> + time.sleep(2)
> + cmds = ["port start all", '', 10]
> + self.bond_inst.d_console(cmds)
> + time.sleep(2)
> + return bond_port
> +
> + def bonding_8023ad_check_macs_without_slaves(self, bond_port):
> + query_type = 'mac'
> + bond_port_mac = self.bond_inst.get_port_mac(bond_port, query_type)
> + default_mac = '00:00:00:00:00:00'
> + if bond_port_mac == default_mac:
> + msg = "bond port default mac is [{0}]".format(default_mac)
> + self.logger.info(msg)
> + else:
> + fmt = "bond port default mac is [{0}], not expected mac"
> + msg = fmt.format(bond_port_mac)
> + self.logger.warning(msg)
> +
> + def bonding_8023ad_check_macs(self, slaves, bond_port):
> + ''' check if bonded device's mac is one of its slaves mac '''
> + query_type = 'mac'
> + bond_port_mac = self.bond_inst.get_port_mac(bond_port, query_type)
> + if bond_port_mac == '00:00:00:00:00:00':
> + msg = "bond port hasn't set mac address"
> + self.logger.info(msg)
> + return
> +
> + for port_id in slaves:
> + slave_mac = self.bond_inst.get_port_info(port_id, query_type)
> + if bond_port_mac == slave_mac:
> + fmt = "bonded device's mac is slave [{0}]'s mac [{1}]"
> + msg = fmt.format(port_id, slave_mac)
> + self.logger.info(msg)
> + return port_id
> + else:
> + fmt = "bonded device's current mac [{0}] " + \
> + "is not one of its slaves mac"
> + msg = fmt.format(bond_port_mac)
> + # it is not supported by dpdk, but supported by linux normal
> + # bonding/802.3ad tool
> + self.logger.warning('bonding_8023ad_check_macs: ' + msg)
> +
> + def check_bonded_device_mac_change(self, slaves, bond_port):
> + remove_slave = 0
> + cur_slaves = slaves[1:]
> + self.bond_inst.remove_slaves(bond_port, False, *[remove_slave])
> + self.bonding_8023ad_check_macs(cur_slaves, bond_port)
> +
> + def check_bonded_device_start(self, bond_port):
> + cmds = [["port stop all", '', 15],
> + ["port start %s"%bond_port, '', 10],
> + ["start", [' ', 'core dump', False]]]
> + self.bond_inst.d_console(cmds)
> + time.sleep(2)
> +
> + def stop_bonded_device(self, bond_port):
> + cmds =[["stop", '', 10],
> + ["port stop %s"%bond_port, '', 10],]
> + self.bond_inst.d_console(cmds)
> + time.sleep(2)
> +
> + def check_bonded_device_up_down(self, bond_port):
> + # stop bonded device
> + cmd = "port stop {0}".format(bond_port)
> + self.bond_inst.d_console(cmd)
> + status = self.bond_inst.get_port_info(bond_port, 'link_status')
> + if status != 'down':
> + msg = "bond port {0} fail to set down".format(bond_port)
> + self.logger.error(msg)
> + raise VerifyFailure(msg)
> + else:
> + msg = "bond port {0} set down successful !".format(bond_port)
> + self.logger.info(msg)
> + # start bonded device
> + cmds = ["port start {0}".format(bond_port), '', 10]
> + self.bond_inst.d_console(cmds)
> + status = self.bond_inst.get_port_info(bond_port, 'link_status')
> + if status != 'up':
> + msg = "bond port {0} fail to set up".format(bond_port)
> + self.logger.error(msg)
> + raise VerifyFailure(msg)
> + else:
> + msg = "bond port {0} set up successful !".format(bond_port)
> + self.logger.info(msg)
> +
> + def check_bonded_device_promisc_mode(self, slaves, bond_port):
> + # disable bonded device promiscuous mode
> + cmd = "set promisc {0} off".format(bond_port)
> + self.bond_inst.d_console(cmd)
> + time.sleep(2)
> + status = self.bond_inst.get_port_info(bond_port, 'promiscuous_mode')
> + if status != 'disabled':
> + fmt = "bond port {0} fail to set promiscuous mode disabled"
> + msg = fmt.format(bond_port)
> + self.logger.warning(msg)
> + else:
> + fmt = "bond port {0} set promiscuous mode disabled successful !"
> + msg = fmt.format(bond_port)
> + self.logger.info(msg)
> + self.bond_inst.d_console("start")
> + time.sleep(2)
> + # check slave promiscuous mode
> + for port_id in slaves:
> + status = self.bond_inst.get_port_info(port_id, 'promiscuous_mode')
> + if status != 'disabled':
> + fmt = ("slave port {0} promiscuous mode "
> + "isn't the same as bond port 'disabled', ")
> + msg = fmt.format(port_id)
> + self.logger.warning(msg)
> + # dpdk developer hasn't completed this function as linux
> + # document description about `Promiscuous mode`, ignore it here
> + # temporarily
> + #raise VerifyFailure(msg)
> + else:
> + fmt = "slave port {0} promiscuous mode is 'disabled' too"
> + msg = fmt.format(port_id)
> + self.logger.info(msg)
> + # enable bonded device promiscuous mode
> + cmd = "set promisc {0} on".format(bond_port)
> + self.bond_inst.d_console(cmd)
> + time.sleep(3)
> + status = self.bond_inst.get_port_info(bond_port, 'promiscuous_mode')
> + if status != 'enabled':
> + fmt = "bond port {0} fail to set promiscuous mode enabled"
> + msg = fmt.format(bond_port)
> + self.logger.error(msg)
> + raise VerifyFailure(msg)
> + else:
> + fmt = "bond port {0} set promiscuous mode enabled successful !"
> + msg = fmt.format(bond_port)
> + self.logger.info(msg)
> + # check slave promiscuous mode
> + for port_id in slaves:
> + status = self.bond_inst.get_port_info(port_id, 'promiscuous_mode')
> + if status != 'enabled':
> + fmt = "slave port {0} promiscuous mode " + \
> + "isn't the same as bond port 'enabled'"
> + msg = fmt.format(port_id)
> + self.logger.warning(msg)
> + # dpdk developer hasn't completed this function as linux
> + # document description about `Promiscuous mode`, ignore it here
> + # temporarily
> + #raise VerifyFailure(msg)
> + else:
> + fmt = "slave port {0} promiscuous mode is 'enabled' too"
> + msg = fmt.format(port_id)
> + self.logger.info(msg)
> +
> + def check_8023ad_agg_modes(self, slaves, bond_mode):
> + ''' check aggregator mode '''
> + check_results = []
> + default_agg_mode = 'stable'
> + for mode in self.AGG_MODES:
> + try:
> + self.bond_inst.start_testpmd()
> + bond_port = self.set_8023ad_bonded(slaves, bond_mode)
> + cur_agg_mode = self.get_8023ad_agg_mode(bond_port)
> + if cur_agg_mode != default_agg_mode:
> + fmt = ("link bonding mode 4 (802.3ad) default agg mode "
> + "isn't {0}")
> + msg = fmt.format(default_agg_mode)
> + self.logger.warning(msg)
> + # ignore default mode
> + if mode == default_agg_mode:
> + fmt = ("link bonding mode 4 (802.3ad) "
> + "current agg mode is {0}")
> + msg = fmt.format(mode)
> + self.logger.info(msg)
> + continue
> + cmds = [
> + ["port stop all", '', 15],
> + ["port start all", '', 15]]
> + self.bond_inst.d_console(cmds)
> + self.set_8023ad_agg_mode(bond_port, mode)
> + except Exception as e:
> + check_results.append(e); print traceback.format_exc()
> + finally:
> + self.bond_inst.close_testpmd()
> + time.sleep(2)
> +
> + if check_results:
> + for result in check_results:
> + self.logger.error(result)
> + raise VerifyFailure('check_8023ad_agg_modes is failed')
> +
> + def check_8023ad_dedicated_queues(self, slaves, bond_mode):
> + ''' check 802.3ad dedicated queues '''
> + check_results = []
> + default_slow_queue = 'unknown'
> + for mode in self.DEDICATED_QUEUES:
> + try:
> + self.bond_inst.start_testpmd()
> + bond_port = self.set_8023ad_bonded(slaves, bond_mode)
> + self.set_8023ad_dedicated_queues(bond_port, mode)
> + except Exception as e:
> + check_results.append(e); print traceback.format_exc()
> + finally:
> + self.bond_inst.close_testpmd()
> + time.sleep(2)
> +
> + if check_results:
> + for result in check_results:
> + self.logger.error(result)
> + raise VerifyFailure('check_8023ad_dedicated_queues is failed')
> +
> + def get_commandline_options(self, agg_mode):
> + slaves = self.dut_ports
> + # get bonding port configuration
> + slave_pcis = self.get_pci_link(slaves)
> + # create commandline option format
> + bonding_name = 'net_bonding0'
> + slaves_pci = ["slave=" + pci for pci in slave_pcis]
> + bonding_mode = 'mode={0}'.format(str(MODE_LACP))
> + agg_config = 'agg_mode={0}'
> + vdev_format = ",".join([bonding_name] + slaves_pci + \
> + [bonding_mode, agg_config])
> + # command line option
> + mode = str(MODE_LACP)
> + option = vdev_format.format(agg_mode)
> + vdev_option = " --vdev '{0}'".format(option)
> + # 802.3ad bond port only create one, it must be the max port number
> + bond_port = len(self.dut_ports)
> + return bond_port, vdev_option
> +
> + def run_test_pre(self, agg_mode):
> + # get bonding port configuration
> + bond_port, vdev_option = self.get_commandline_options(agg_mode)
> + self.bond_port = bond_port
> + # boot up testpmd
> + self.bond_inst.start_testpmd(eal_option=vdev_option)
> + cur_slaves, cur_agg_mode = self.bond_inst.get_bonding_info(bond_port,
> + ['slaves', 'agg_mode'])
> + if agg_mode != cur_agg_mode:
> + fmt = 'expected agg mode is [{0}], current agg mode is [{1}]'
> + msg = fmt.format(agg_mode, cur_agg_mode)
> + self.logger.warning(msg)
> + # get forwarding port
> + for port_id in range(len(self.dut_ports)):
> + # select a non-slave port as forwarding port to do transmitting
> + if str(port_id) not in cur_slaves:
> + tx_port_id = port_id
> + break
> + else:
> + tx_port_id = bond_port
> + # enable dedicated queue
> + self.set_8023ad_dedicated_queues(bond_port, 'enable')
> + self.set_bond_port_ready(tx_port_id, bond_port)
> + slaves = [int(slave) for slave in cur_slaves]
> +
> + return bond_port, slaves, tx_port_id
> +
> + def run_dpdk_functional_pre(self):
> + mode = MODE_LACP
> + slaves = self.dut_ports[:]
> + self.bond_inst.start_testpmd()
> + bond_port = self.run_8023ad_pre(slaves, mode)
> + return slaves, bond_port
> +
> + def run_dpdk_functional_post(self):
> + self.bond_inst.close_testpmd()
> +
> + def check_cmd_line_option_status(self, agg_mode, bond_port, slaves):
> + mode = str(MODE_LACP)
> + msgs = []
> + cur_mode, cur_slaves, cur_active_slaves, cur_agg_mode =\
> + self.bond_inst.get_bonding_info(bond_port,
> + ['mode', 'slaves', 'active_slaves', 'agg_mode'])
> + # check bonding mode
> + if mode != cur_mode:
> + fmt = 'expected mode is [{0}], current mode is [{1}]'
> + msg = fmt.format(mode, cur_mode)
> + msgs.append(msg)
> + # check bonding 802.3ad agg mode
> + if agg_mode != cur_agg_mode:
> + fmt ='expected agg mode is [{0}], current agg mode is [{1}]'
> + msg = fmt.format(agg_mode, cur_agg_mode)
> + msgs.append(msg)
> + # check bonded slaves
> + _cur_slaves = [int(id) for id in cur_slaves]
> + if not _cur_slaves or cmp(sorted(slaves), sorted(_cur_slaves)) != 0:
> + slaves_str = ' '.join([str(id) for id in slaves])
> + cur_slaves_str = ' '.join([str(id) for id in _cur_slaves]) \
> + if _cur_slaves else ''
> + msg_format = 'expected slaves is [{0}], current slaves is [{1}]'
> + msg = msg_format.format(slaves_str, cur_slaves_str)
> + msgs.append(msg)
> + # check active slaves status before ports start
> + if self.kdriver is 'i40e':
> + if cur_active_slaves:
> + check_active_slaves = [int(id) for id in cur_active_slaves]
> + if cmp(sorted(slaves), sorted(check_active_slaves)) != 0:
> + slaves_str = ' '.join([str(id) for id in slaves])
> + msg_fmt = ('expected active slaves is [{0}], '
> + 'current active slaves is [{1}]')
> + msg = msg_fmt.format(slaves_str, cur_active_slaves)
> + msgs.append(msg)
> + else:
> + msg = 'active slaves should not be empty'
> + #self.logger.warning(msg)
> + #msgs.append(msg)
> + else:
> + if cur_active_slaves:
> + msg = 'active slaves should be empty'
> + #self.logger.warning(msg)
> + #msgs.append(msg)
> + # check status after ports start
> + self.bond_inst.start_ports()
> + # set bonded device to active status
> + if self.kdriver is not 'i40e':
> + cur_active_slaves = [
> + int(id) for id in self.bond_inst.get_bonding_info(
> + bond_port, 'active_slaves')]
> + if not cur_active_slaves or cmp(sorted(slaves),
> + sorted(cur_active_slaves)) != 0:
> + slaves_str = ' '.join([str(id) for id in slaves])
> + active_str = ' '.join([str(id) for id in cur_active_slaves]) \
> + if cur_active_slaves else ''
> + msg_fmt = (
> + 'expected active slaves is [{0}], '
> + 'current active slaves is [{1}]')
> + msg = msg_fmt.format(slaves_str, active_str)
> + msgs.append(msg)
> + return msgs
> + #
> + # Test cases.
> + #
> + def set_up_all(self):
> + """
> + Run before each test suite
> + """
> + self.verify('bsdapp' not in self.target, "Bonding not support freebsd")
> + #------------------------------------------------------------
> + # link peer resource
> + self.dut_ports = self.dut.get_ports()
> + required_link = 2
> + self.verify(len(self.dut_ports) >= required_link, "Insufficient ports")
> + #------------------------------------------------------------
> + # 802.3ad related
> + self.bond_port = None
> + self.bond_slave = self.dut_ports[0]
> + #----------------------------------------------------------------
> + # initialize bonding common methods name
> + config = {
> + 'parent': self,
> + 'pkt_name': 'udp',
> + 'pkt_size': FRAME_SIZE_64,
> + 'src_mac': '52:00:00:00:00:03',
> + 'src_ip': '10.239.129.65',
> + 'src_port': 61,
> + 'dst_ip': '10.239.129.88',
> + 'dst_port': 53,}
> + self.bond_inst = bonding.PmdBonding(**config)
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + try:
> + self.bond_inst.close_testpmd()
> + except Exception:
> + pass
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> +
> + def test_basic_behav_startStop(self):
> + '''
> + test 802.3ad basic behavior(bond port start/stop)
> + '''
> + msg = ''
> + slaves, bond_port = self.run_dpdk_functional_pre()
> + try:
> + for _ in range(10):
> + self.check_bonded_device_start(bond_port)
> + self.stop_bonded_device(bond_port)
> + except Exception as e:
> + print traceback.format_exc()
> + msg = "bonding 8023ad check start/stop failed"
> + self.run_dpdk_functional_post()
> + if msg:
> + raise VerifyFailure(msg)
> +
> + def test_basic_behav_mac(self):
> + '''
> + test 802.3ad basic behavior(bond port mac address)
> + '''
> + msg = ''
> + slaves, bond_port = self.run_dpdk_functional_pre()
> + try:
> + self.bonding_8023ad_check_macs(slaves, bond_port)
> + self.check_bonded_device_mac_change(slaves, bond_port)
> + except Exception as e:
> + msg = "bonding 8023ad check mac failed"
> + self.run_dpdk_functional_post()
> + if msg:
> + raise VerifyFailure(msg)
> +
> + def test_basic_behav_upDown(self):
> + '''
> + test 802.3ad basic behavior(bond port link up/down)
> + '''
> + msg = ''
> + slaves, bond_port = self.run_dpdk_functional_pre()
> + try:
> + self.check_bonded_device_up_down(bond_port)
> + except Exception as e:
> + msg = "bonding 8023ad check link up/down failed"
> + self.run_dpdk_functional_post()
> + if msg:
> + raise VerifyFailure(msg)
> +
> + def test_basic_behav_promisc_mode(self):
> + '''
> + test 802.3ad basic behavior(bond port promisc mode)
> + '''
> + msg = ''
> + slaves, bond_port = self.run_dpdk_functional_pre()
> + try:
> + self.check_bonded_device_promisc_mode(slaves, bond_port)
> + except Exception as e:
> + msg = "bonding 8023ad check promisc mode failed"
> + self.run_dpdk_functional_post()
> + if msg:
> + raise VerifyFailure(msg)
> +
> + def test_command_line_option(self):
> + ''' test 802.3ad bonding configs with commandline option '''
> + msgs = []
> + for agg_mode in self.AGG_MODES:
> + bond_port, cur_slaves, tx_port_id = self.run_test_pre(agg_mode)
> + msgs += self.check_cmd_line_option_status(
> + agg_mode, bond_port, cur_slaves)
> + self.bond_inst.close_testpmd()
> + if msgs:
> + for msg in msgs:
> + self.logger.warning(msg)
> + msg = 'fail to config from command line at {0}'.format(agg_mode)
> + raise VerifyFailure(msg)
> +
> + def test_basic_behav_agg_mode(self):
> + ''' test 802.3ad aggregator mode setting '''
> + mode = MODE_LACP
> + self.check_8023ad_agg_modes(self.dut_ports, mode)
> +
> + def test_basic_dedicated_queues(self):
> + ''' test 802.3ad dedicated queues setting '''
> + mode = MODE_LACP
> + self.check_8023ad_dedicated_queues(self.dut_ports, mode)
> \ No newline at end of file
> --
> 1.9.3
next prev parent reply other threads:[~2019-02-28 6:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 5:36 [dts] [PATCH V2][pmd_bonded_8023ad]: " yufengmx
2019-02-28 5:36 ` [dts] [PATCH V2]pmd_bonded_8023ad: " yufengmx
2019-02-28 6:04 ` Mo, YufengX [this message]
2019-02-28 8:40 ` Chen, Zhaoyan
2019-02-28 10:58 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B8B15C44A3F2C044966E545C7B7371153E7B9F32@shsmsx102.ccr.corp.intel.com \
--to=yufengx.mo@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).